Database Info

Cracked Screen on my Touch Pro

I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)

Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.

How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?

Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!

I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!

3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!

a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.

maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!

solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper

If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050

-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.

maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.

I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?

HTC Sensation Screen replacement

Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks

Off course HTC will repair it, but it'll take longer and probably charge you a lot more than what you can it fixed for.

Out of curiosity do you/your girl not put the phone in a case or something?

nba1341 said:
Out of curiosity do you/your girl not put the phone in a case or something?
Click to expand...
Click to collapse
Haha, no i did not.. But as soon as i get it fixed im gunna invest in a bulletproof / bombproof carbon kevlar box and keep it locked inside it !!!

Was it bought through a carrier or sim free? Could always take it to your carrier and see what they suggest, although they're not normally the cheapest, but at least it should get done properly.

Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en&currency=GBP&products_id=4769
opinions ??

No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
azzledazzle said:
Yeah i got it through vodafone, I think i will give them a call and see what they say.
I was considering taking out insurance, then in a few days call them and tell them its broken, This is risky.... what do you think the odds are with me getting away with it ?
Do you think they would notice the aftermarket digitizer ? It is an exact replica with HTC on it....
these damn phones are so fragile.... I miss the old nokias
EDIT: Seen this and am tempted to get it and fix it myself..... http://www.lingosbox.com/product_info.php?language=en&currency=GBP&products_id=4769
opinions ??
Click to expand...
Click to collapse

joe.attaboy said:
No, you won't get away with it, and it's dishonest, anyway. Don't make yourself a criminal over a cell phone.
Now, that being said, check Ebay. There are lots of vendors in the UK and elsewhere (lots here in the US) that sell replacement screen kits, many of which include instructions and tools.
If you're handy with small tools and careful, you can do this yourself for a fraction of what it will cost you to have it done. I learned this when my kid's iPod battery died some years ago. They're not user replaceable, and Apple wanted some outrageous amount to do it, plus you had to send it away. I found a guy on line that sold batteries with tools and directions, and in 20 minutes, she was good as new.
Pays to do it yourself.
Click to expand...
Click to collapse
I totally agree with you !! i do not want to result to fraudulent behaviour... BUT, i dont want to pay approx £80 for parts and make the whole situation worse by possibly making more damage.
BUT i also dont want to pay approx £150 - £200 thinking i could of fixed it for much less by doing it myself.
I am good with stuff like that and am very gentle and careful..... but i dont believe in myself lol

I recently replaced mine. Its not too terribly hard to do. But you have to get it just right. Currently the digitizer is a bit slow and unresponsive at time but I think i didnt get it in there completely right. So I'm going to dissaimble is again today and get it suck in better and see of that helps
Sent from my cm_tenderloin using Tapatalk

Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.

silentsnow31802 said:
Since the Sensation screen is made by two different manufactures is it possible to mix and match them or do you have to replace the screen with the same one with phone came with? I have a Sensation that needs a LCD that I have not taken apart yet. Im wanting to get the better screen but im not sure if I can just put the better screen in it if thats not what it came with in the first place.
Click to expand...
Click to collapse
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592

dgenx210 said:
Well it's much better to replace it with the same display just to be sure it's going to work. There's also a side by side comparison of the Sharp and Acer (AUO) displays
That said, you can check what panel you have using the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1131592
Click to expand...
Click to collapse
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.

silentsnow31802 said:
The display on my phone is completely destroyed so I cant use terminal emulator to look it up :-(
EDIT: I was doing some research on the part numbers on the back of my screen and I found this thread...
http://pdaclub.pl/forum/sensation/dziwny-kurz-pod-dotykiem/
Post #8 has my same part number as mine (74h02057-00M) listed and in the same sentence AUO. So I have to assume it had the AUO screen which kinda sucks.
Click to expand...
Click to collapse
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e

dgenx210 said:
If somehow you can get it to get recognized by adb, you can issue the dmesg from there by using 'adb shell dmesg'
Sent from my HTC Z715e
Click to expand...
Click to collapse
I dont even have a battery for it at the moment. When the battery arrives ill check it out. I have a feeling im not going to be able to get ADB working though.

I bought this!
http://www.ebay.com/itm/260959508044?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Ill let you all know how it turns out....

Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.

silentsnow31802 said:
Well I got the screen and digitizer from the link above today. Installed it and its perfectly fine. No lag anywhere, registers touch like the stock one did. The LCD panel seems to be the same quality as the AUO panel but thats fine with me since im pretty sure this phone came with the AUO from the factory. If you do decide to replace your screen and digitizer i suggest getting them as separate pieces. Having them attached to each other made it sorta difficult to get back together cleanly.
Click to expand...
Click to collapse
Glad you finally got it sorted. Welcome back to you then

azzledazzle said:
Hey guys, New to the HTC sensation threads (its my Girlfriends phone)
Got her this phone about 6 months ago - 1 week after having it she dropped it and broke the digitizer anyway i got that fixed at my local phone shop with aftermarket digitizer - it worked well but you could tell it was not genuine.
anyway the other week i dropped it and broke the lcd screen yet the digitizer is fine and the phone is still 100% useable - except the display looks awful.
Does anyone know if this is an easy fix, is it worth fixing myself or taking it to the phone shop - Im embarrassed to go back and explain how it has broke again lol.... But i need to get it fixed, Im so close to having my wang removed by my girlfriend.
I was wondering whether or not HTC themselves would repair it ? and maybe replace the digitizer too, I dont mind paying the extra £££ for genuine parts and to be fixed by genuine HTC repairmen..
Any ideas how i can get out this mess ??
sorry for the long post.
Thanks
Click to expand...
Click to collapse
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that

mckellick said:
You must of dropped that phone from ten stories lol.. I rarely seen any lcd screen break or crack on the sensation. Being its made from aluminum and the screen is Gorilla Glass.. its tough stuff.. but sorry to hear that
Click to expand...
Click to collapse
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!

azzledazzle said:
well the day after i got it fixed i knocked it off the side onto tiled flooring, it cracked the lcd but not the digitizer... so weird lol
anyway since then i have had some signal issues with my provider, they have established that the handset is faulty, they are collecting it to repair it.
I still havent had the screen fixed so im just going to see what happens when they go to repair it, Maybe they will think they broke the screen and fix it before returning it to me. Or maybe they wont.... if thats the case i will argue with them that it was fine before they took it away from me
after all, they must have 100's of these phones in boxes gathering dust in their warehouse(s) so a little arguing and im sure i will get it fixed / replaced.
Shhhhh Moms the word !!!
Click to expand...
Click to collapse
Lol yeah I bet they do..but most of the insurance phones you get after your device breaks are refurbished. Cheap beat up and abused.. then recycled.. lol that sounded like a lifetime channel movie. Well I hope your back up and running again..and how'd that tile doing? Cheers mate
Sent from Xparent Cyan Tapatalk HTC Sensation 4G with Beats and a kickass Rom

[Q] Busted LCD got blue screen?

Okay strait to the point! I've got a Galaxy S2 with Android 4.0.3 bought it 4 months ago.
I accidently dropped my phone and cracked my screen on the bottom right corner. The crack went from bottom and a diagonal line up til the right side. I took a picture below.
imageshack(.)us/photo/my-images/685/20120326152703.jpg
This happened about 2 months ago. No problem since. I dropped the phone a few times afterward but it didnt seem to affect it lucky me.
Yesterday i tried watch some series over my WIFI and the phone got really hot around the camera area. The phone wasn't acting well either and then battery dropped from 75% til about 10% in 10 minutes without any video still showing up. (Never had that problem before). I stopped using it and instead put it on recharge for the next day. And today on the morning it was still okay. Went to school and back with the mobile still working. Put it on my table and checked my PC.
About 2 hours later while cheking up on my galaxy i discovered this.
imageshack(.)us/photo/my-images/198/20120326153629.jpg
I think that the LCD finally busted but i need to be sure if it has something to do with the previous crack and also if you could provide any info about what to do with it? Does my warrenty cover this? Or do i need extra insuranse?

I really need help right now LCD blackned spots
The screen has started to turn black from the core of the LCD leak. I now really think this is a broken LCD screen and not a software problem. If someone knows what i could do to fix this i really could need the help right now.

Someone correct me if I'm wrong,
But it sounds to me like you've busted the digitizer portion of your device. As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi). At any rate, judging from the second picture you provided us it most definitely looks like you damaged the digitizer.
Most companies don't really cover damaged screens caused by users. However, being that your S2 is only 4 months old you could possibly pass it as "it did it by itself, I don't know what happen". Worth a shot I guess...
If all fails you could bring it to a electronics repair shop or you can repair it yourself via a digitizer part bought on ebay(probably pretty expensive being that its part of the screen)

If all else fails check ebay for a new screen.

cbr69er said:
If all else fails check ebay for a new screen.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Full-LCD-Di...ltDomain_0&hash=item27c3101beb#ht_1618wt_1185
If your thinking about taking the DIY road I found a screen for you.Quick note about buying something overseas on eBay: it usually takes awhile for the part to ship and even when you get it, the part may not be functional. But don't fret, eBay is usually pretty good about stuff like this so a working part will be guaranteed or your money back!
If you do decide to repair it yourself I would first research A LOT about your phone. Especially, the disassembly guide! Try to use only credible guides such as iFixit, repair universe etc.
This only applies to flex ribbon cables:
when replacing screens sometimes you have to plug it in a few times before you actually get it to respond(could be cause by oxidation of the pins) if thats the case, you could try to take a #2 pencil eraser and gently rub against the pins and remove the oxidation...
Good Luck!
Please let me know how it goes!

rhodium9 said:
As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi).
Click to expand...
Click to collapse
Yes it is really a crack and a very annoying one. It doesn't cause any problems with the touch-function, so I've been using it normally but for the screen, it has gone completely black but for the top right part still a little darkblue. I think I'm going with your first answer and try to check it in on warranty have had a bit luck with it past couple of times but im not sure about changing it myself. If having no luck with warranty then maybe ill try doing it myself.

at any rate weather you get warranty to change it or you fix it yourself maybe youll learn to be more careful and get a case maybe???

Device felt down! Touchscreen doesnt work well

After getting throught this problem http://forum.xda-developers.com/showthread.php?t=1644971 I got another one. My device felt down and now I got a small "slot" bbetween the display and the chassis. But thats not the only problem. The touchscreen (digitizer ??) does not work well. The four "onscreen" buttons dont work and about a quarter inch above them the screen doenst react well, sometimes it does, most of the tim not. I want to repair it by myself but I do not know much about it. I know how to assemble and disassmble, but thats it. Is this http://www.ebay.de/itm/270933343810 the part I have to change? Or is there even more or an other part?
Thank you so much guys!

I disassemled the hole thing now and I can see that there's a mini-crack in the lcd at the top right. No matter for the display at the moment. It must be the digitizer?! Is it possible that it is broken, while I cannot see a damage onit?

yxcv99 said:
I disassemled the hole thing now and I can see that there's a mini-crack in the lcd at the top right. No matter for the display at the moment. It must be the digitizer?! Is it possible that it is broken, while I cannot see a damage onit?
Click to expand...
Click to collapse
this is the part you need http://www.ebay.de/itm/LCD-Display-...75910021?pt=Handy_Zubehör&hash=item337330cc85
thats the whole assembly otherwise you will find it really hard because the touch screen digitizer and the main screen are together attatched.

Yesss baby! I replaced the digitzer and it works fine again.
This thread can be removed ;-).

yxcv99 said:
Yesss baby! I replaced the digitzer and it works fine again.
This thread can be removed ;-).
Click to expand...
Click to collapse
edit the title of your thread and adds solved at the start
Sent from a Desire S waiting for Kernel 3. WAKE UP HTC!!!!

Need LCD part number!

Hi everyone
I broke the screen on my tablet over a year ago, had the screen replaced with a new one but when i got it back the touch didnt work. The guy seemed like he was sorry about it so he only ended up charging me 30 bucks and said something else is wrong. i was skeptical about it cause with the cracked screen the top corner still responded to touch and now nothing works
...long story short i did some research and saw that theres a few different types of screens for the 300 i figured they may have put the wrong one on so i removed the back to check the version number (it is written on the cable that goes from the glass to the tablet).
However. On my tablet there is no cable at all... i guess i got screwed by the place they put a defective screen or something... Either way of course the touch isnt working the cable isnt even there...
all i need to know is if theres another way to find the version number for the lcd they are pretty cheap online im just going to take a stab at fixing this myself..
ive asked asus that was a waste of time they advised me to send it in they would fix it for 250...ya right

schkeet said:
Hi everyone
I broke the screen on my tablet over a year ago, had the screen replaced with a new one but when i got it back the touch didnt work. The guy seemed like he was sorry about it so he only ended up charging me 30 bucks and said something else is wrong. i was skeptical about it cause with the cracked screen the top corner still responded to touch and now nothing works
...long story short i did some research and saw that theres a few different types of screens for the 300 i figured they may have put the wrong one on so i removed the back to check the version number (it is written on the cable that goes from the glass to the tablet).
However. On my tablet there is no cable at all... i guess i got screwed by the place they put a defective screen or something... Either way of course the touch isnt working the cable isnt even there...
all i need to know is if theres another way to find the version number for the lcd they are pretty cheap online im just going to take a stab at fixing this myself..
ive asked asus that was a waste of time they advised me to send it in they would fix it for 250...ya right
Click to expand...
Click to collapse
Do you still need help with this? If you do, open the tab, take all necessary precautions with the battery, remove all boards and cables, and look where the digitizer's ribbons should be. If they're not there, it means they've been ripped when the "repairman" reassembled the thing. If the lcd still works, all you need is a new digitizer. A G01 would work across the board and is cheap. Go to this thread for more info. Good luck.

Thank you I had given up for a while but just wiped the dust off this thing yesterday...I'll give it a try
Sent from my Nexus 5 using XDA Free mobile app