Related
July 21th, today was extracted from OTA in South Korea.
Increase in 3G sensitivity
12.59.60.26U_26.11.04.21m
MD5# radio.img C39BCFCD8E2C46502BDD02CCA6D914FF
Download http://www.multiupload.com/SZHBZQBW3J
MD5# radio.zip 1C92D206D7C3F3F5C4933681E138FA96
download http://www.multiupload.com/3PV94Z148I
radio.img
HTML:
TEST Same area, Same time, Three Times, Two Desire HD(Speed: MBps)
avg PING / Upload / Download / Signal Strength
12.54.60.25_26.09.04.11_M2 97 2.33 6.54 81-93
vs
12.59.60.26U_26.11.04.21m 98 2.42 6.55 72-83
attachment RIL_12.59.60.26U_26.11.04.21m.zip (Sense) script by amresh (same RIL 12.54.60.25_26.09.04.11_M2)
PD98IMG.zip http://www.multiupload.com/QVO82SDGK8
warning If you use it, you will not downgrade and root.
South Korea is local.
So if you going to build ROM, some files will be replaced.
htcdialer, mms, etc ...
And you must edit CID
this not changed build.prop
Root state, OTA was a forced update.
android 2.3.3
Changelog in 2.52.405.8
system/framework
framework.jar and...
system/bin
debuggerd, dhcpcd, iptables, sh0, wpa_supplicant,
system/lib
libhardware_legacy.so, libLaputaEngine.so, libLaputaLbJni.so, libLaputaLbProviderJni.so, libskia.so, libstagefright.so, libDWP.so, libflashplayer.so, system/etc
default.acdb, default_org.acdb, cwcerts.zip, otacerts.zip, NOTICE.html.gz, wpa_supplicant.conf, calibration, media_profiles.xml, spn-conf.xml
unidenfied systeam/app
maybe IME, MMS, Dialer, Phone....
when will the ril be released ?
alain57 said:
when will the ril be released ?
Click to expand...
Click to collapse
Sorry, I'm late. Attached Ril to the first post.
bour said:
system.img http://www.multiupload.com/7HPI8T3Y20
South Korea is local.
So if you going to build ROM, some files will be replaced.
htcdialer, mms, etc ...
And you must edit CID
Click to expand...
Click to collapse
the build version is 2.2.1,the product version is 2.52.???
Is the RIL HM or G?
triaqu said:
the build version is 2.2.1,the product version is 2.52.???
Click to expand...
Click to collapse
this not changed build.prop
Root state, OTA was a forced update.
android 2.3.3
Changelog in 2.52.405.8
system/framework
framework.jar and...
system/bin
debuggerd, dhcpcd, iptables, sh0, wpa_supplicant,
system/lib
libhardware_legacy.so, libLaputaEngine.so, libLaputaLbJni.so, libLaputaLbProviderJni.so, libskia.so, libstagefright.so, libDWP.so, libflashplayer.so, system/etc
default.acdb, default_org.acdb, cwcerts.zip, otacerts.zip, NOTICE.html.gz, wpa_supplicant.conf, calibration, media_profiles.xml, spn-conf.xml
unidenfied systeam/app
maybe IME, MMS, Dialer..
Leechoonhwee said:
Is the RIL HM or G?
Click to expand...
Click to collapse
Extracted Sense(OTA)
I think HM.
Has anyone flashed this new radio yet on any custom rom? Curious if any improvements
I´m gonna flash this tonight..
What do you mean by 3G sensetivety??
Cause where I live I have a kinda hard time getting 3G, have to put the phone in the window.. Will I have easier to get it now??
Cheers..
Leechoonhwee said:
Is the RIL HM or G?
Click to expand...
Click to collapse
HTC-RIL 2.2.0160HM (3 June 2011)
with friendly greet
starbase64
Works fine on miui.
Sent from my HTC Desire HD using XDA App
starbase64 said:
HTC-RIL 2.2.0160HM (3 June 2011)
with friendly greet
starbase64
Click to expand...
Click to collapse
Thanks!
Installed this with latest Miui, noticed slight battery drain. GPS slightly faster.
Thanhs
Tested on CM NB#137.
Working fine with 1003 G Ril.
Very fast cold acquisition with GPS (~10 sec in my living room with cloudy weather with Angel Death patch).
Enjoy.
actually I flashed this Radio. n the RIL ..I've not seen a single % difference.
Any difference in terms of battery?
For signal checking I would recommend doing comparisons using this app
https://market.android.com/details?id=de.android.telnet
Gives you great info and graphs on db signal strength for wifi and wireless network.Shows you also tower info and handoffs as well as tower location on google maps
For tests I compare current radio in same location (wifi and 3G) and leave the screen timeout to 5min
you will have a pretty good idea on the average signal from the graph.
Then install the new radio and do the same test.
Thats what I call my standby test
After that I do a mobile test. There is an elevator in my office where when going from 1 floor to another I get borderline service.
So I start the app prior to going in and monitor the lowers signal and handoffs and then do the same with the new radio
fidorulz said:
Any difference in terms of battery?
For signal checking I would recommend doing comparisons using this app
https://market.android.com/details?id=de.android.telnet
For tests I compare current radio in same location (wifi and 3G) and leave the screen timeout to 5min
Click to expand...
Click to collapse
So, did you test it ?
Not yet will test later today maybe. Busy installing new rom and apps currently
hero000 said:
actually I flashed this Radio. n the RIL ..I've not seen a single % difference.
Click to expand...
Click to collapse
Did you flash the RIL via recovery after mounting system?
bour said:
attachment RIL_12.59.60.26U_26.11.04.21m.zip (Sense) script by amresh (same RIL 12.54.60.25_26.09.04.11_M2)
Click to expand...
Click to collapse
Can't believe that. I've downloaded both RILs and noticed that libhtc_ril.so has different sizes. So they can't be the same?!?
Unofficial AOKP Nightly Build from 11/12/12
This ROM was built from the official AOKP git tree as of 11/12/12 and also contains the following:
- Fixed several compile errors
- Fix for Network Location
- Kernel Modules Added
- ROM Control Working
- Theme Chooser Built (It loads, but maybe not working?)
- Klin kernel 3.0.44 (Very stable)
- Framework mod to change task switch button to menu button (long press home for task switch)
Based on 2.21 RUU & Tested with 1.08ts Radio & Hboot 1.14
Whats working:
- GPS
- Cameras
- Network Location(with gapps)
- Sound
- Light sensor
- Notification LED
- Calls & Data
- Wifi
- Bluetooth
Known Issues:
- Maps may cause a hot reboot - downgrade maps as workaround
Credits:
mikeyinid
Team Kang
Team Douche
klin1344
evilisto
Download Link:
http://d-h.st/74p
Suggested gapps:
gapps-jb-20121011-signed.zip
Wow thanks man.
Really glad to see more developers.
Sent from my HTC VLE_U using Tapatalk 2
equid0x said:
Unofficial AOKP Nightly Build from 11/12/12
This ROM was built from the official AOKP git tree as of 11/12/12 and also contains the following:
- Fixed several compile errors
- Fix for Network Location
- Kernel Modules Added
- ROM Control Working
- Theme Chooser Built (It loads, but maybe not working?)
- Klin kernel 3.0.44 (Very stable)
- Framework mod to change task switch button to menu button (long press home for task switch)
Based on 2.21 RUU & Tested with 1.08ts Radio & Hboot 1.14
Whats working:
- GPS
- Cameras
- Network Location(with gapps)
- Sound
- Light sensor
- Notification LED
- Calls & Data
- Wifi
- Bluetooth
Known Issues:
- Maps may cause a hot reboot - downgrade maps as workaround
Credits:
mikeyinid
Team Kang
Team Douche
klin1344
evilisto
Download Link:
http://www.filehosting.org/file/details/396284/equid0x_aokp_111212_build1.zip
Suggested gapps:
gapps-jb-20121011-signed.zip
Click to expand...
Click to collapse
So you have included Klins Kernel right?
Doesn't it cause issues with wifi, because it is outdated?
CrayzyBoy said:
So you have included Klins Kernel right?
Doesn't it cause issues with wifi, because it is outdated?
Click to expand...
Click to collapse
It works fine for me. I am interested in the Zarboz kernel, but it was unstable on my phone when I tried it, even with stock settings. I am considering compiling my own, and took this up a while back, but ran into some issues and tabled it for the time being. I've been using Klin's kernel on mikeyinid's ROM for a while and haven't had any issues yet.
I'm a bit confused over here. Is this build from 11/12/12 or 11/22/12?
Thanks,
Da Baron
I can't download the file.....
Error
The file is not available. Please try again later
Da Baron said:
I'm a bit confused over here. Is this build from 11/12/12 or 11/22/12?
Thanks,
Da Baron
Click to expand...
Click to collapse
It is from 11/12... took me a few days to get the kinks worked out and I didn't have time to work on it during the week.
cecengazi said:
I can't download the file.....
Error
The file is not available. Please try again later
Click to expand...
Click to collapse
I'm checking the DL link. I'm open to ideas for decent alternates...
[edit] Updated the dl link to d-h.st - check the OP
Thanks, will give it a try.
equid0x said:
It is from 11/12... took me a few days to get the kinks worked out and I didn't have time to work on it during the week.
Click to expand...
Click to collapse
We're you getting errors when compiling with the camera? Whenever I try to compile that's where it seems to be hanging up
thanks,
good work....
The rom is not rooted the video rec sound is low,too.
sryan1983 said:
We're you getting errors when compiling with the camera? Whenever I try to compile that's where it seems to be hanging up
Click to expand...
Click to collapse
You might try checking out a different device tree. What particular errors are you seeing?
cecengazi said:
thanks,
good work....
The rom is not rooted the video rec sound is low,too.
Click to expand...
Click to collapse
Install ChainsDD's Superuser app from the market. I will look into the audio levels for video recording the next time I build.
To OP,
Do you plan on keeping this developemnt going forward?
There are plenty of people here that would love this, including myself.
:laugh:
Lozone said:
To OP,
Do you plan on keeping this developemnt going forward?
There are plenty of people here that would love this, including myself.
:laugh:
Click to expand...
Click to collapse
I wiped out the distro I had running where I orginally did the build, but have a tarball with the build tree. I started working on moving this into a VM, but had issues with a crashy linux distro and haven't finished the move yet. AOKP didn't have any changes at all at least through the first week of December, so there was nothing to build regardless. I just checked a couple of days ago and saw some new commits, which I intend to sync and run a new build as soon as I get the build VM set back up. FWIW I have been running my last build as a daily driver since I built it and haven't run into any issues, except that I'm pretty sure the theme chooser doesn't work at all. I will have to go through the AOKP git to see whats been added with the latest commits.
I installed new CM11 RC1 bu unfortunately GPS stop working. I try to ref lash but nothing better.
Then i installed beta 4 and gps works properly.
Why? Someone can help me?
Thanks
Install the new build
gabrygaggio19 said:
I installed new CM11 RC1 bu unfortunately GPS stop working. I try to ref lash but nothing better.
Then i installed beta 4 and gps works properly.
Why? Someone can help me?
Thanks
Click to expand...
Click to collapse
GPS was not working in RC1 but it was working in beta 4.
Check the thread a new build has been released.. GPS is also fixed in that..
Edit: GPS not fixed in New build as well.
shubhojit89 said:
GPS was not working in RC1 but it was working in beta 4.
Check the thread a new build has been released.. GPS is also fixed in that..
Edit: GPS not fixed in New build as well.
Click to expand...
Click to collapse
I hope they solve the problem as soon as possible. If I can ask, why GPS doesn't work now?
I'm waiting for the gps fixing too
This issue has been tested in every Rom release.. GPS is not locking signal.. Tested with GPS test app and says GPS is working..
Anyone facing issue..?
Any solutions..?
For me it doesn't work on the latest nightly 24/9/14. However it works when you have GPS set on high accuracy mode.
Sent from my Xperia L using XDA Free mobile app
b00tbu9 said:
This issue has been tested in every Rom release.. GPS is not locking signal.. Tested with GPS test app and says GPS is working..
Anyone facing issue..?
Any solutions..?
Click to expand...
Click to collapse
If you are not passionate about any particular ROM then you can try AOSP Paranoyed Android or Pac Rom. Pacrom is nearly perfect and this also have all ported features from all other ROM.
Parthabisw said:
If you are not passionate about any particular ROM then you can try AOSP Paranoyed Android or Pac Rom. Pacrom is nearly perfect and this also have all ported features from all other ROM.
Click to expand...
Click to collapse
What is your device name 04 or 05..?
Can you try device only mode and check if GPS is working..
b00tbu9 said:
Can you try device only mode and check if GPS is working..
Click to expand...
Click to collapse
Yes I tried it. And gps is fixed in most of the roms even in CM11 official built also but the problem was in the location fixing by the help of network and wifi. They are not working so gps hardware takes all the ages to fix the location and need a clear sky and open area. But now in those roms location based on wifi and gsm is working. So you will get a early fix
DELETED
XDA:DevDB Information
CyanogenMod 12.1 (CDMA Only), ROM for the Moto G
Contributors
Meticulus
Source Code: https://github.com/Meticulus/android_kernel_motorola_msm8226
ROM OS Version: 5.1.x Lollipop
Based On: AOSP,CyanogenMod
Version Information
Status: Testing
Created 2015-04-01
Last Updated 2018-01-30
@Meticulus Is the 3/29 build the newest build?
starkly_raving said:
@Meticulus Is the 3/29 build the newest build?
Click to expand...
Click to collapse
Yes, I'm building now: http://meticulus-development.com/index.php/build-server/
I've got the signal bar thing worked out and the "network name" fixed too...
Meticulus said:
Yes, I'm building now: http://meticulus-development.com/index.php/build-server/
I've got the signal bar thing worked out and the "network name" fixed too...
Click to expand...
Click to collapse
@Meticulus, thanks for all your hard work! (When I am able I plan to make a donation)
You deserve the support of the xda community. :good:
Special love for CDMA variants
Sent from my Moto G using Tapatalk
Meticulus said:
Yes, I'm building now: http://meticulus-development.com/index.php/build-server/
I've got the signal bar thing worked out and the "network name" fixed too...
Click to expand...
Click to collapse
Thank you for the work... I am not a dev, but I can imagine it is tough trying to develop for multiple ROMs and devices. I sincerely appreciate the work for our CDMA device. Blessings to you!
Hey, thank you very much for this! I'm sure many users will be grateful to you! Can you please make unified builds, if possible? That'd be great!
This is nice at last i see a fully working rom for CDMA users hope everyone is happy now and i dont think there is need of unified build right now but for future we need it , thanks for this
Aayushya said:
Hey, thank you very much for this! I'm sure many users will be grateful to you! Can you please make unified builds, if possible? That'd be great!
Click to expand...
Click to collapse
pico hackr said:
This is nice at last i see a fully working rom for CDMA users hope everyone is happy now and i don't think there is need of unified build right now but for future we need it , thanks for this
Click to expand...
Click to collapse
The device I have is a "Boost Mobile" XT1031 which is a CDMA device. I can not test things on GSM, so I can not say if things work with GSM. Therefore, I have decided to only support the CDMA variants.
However, It maybe that things work just fine GSM. If it does great but I don't support it.
EDIT: Downloading and testing build...
pico hackr said:
This is nice at last i see a fully working rom for CDMA users hope everyone is happy now and i dont think there is need of unified build right now but for future we need it , thanks for this
Click to expand...
Click to collapse
CM already merged the CDMA fixes for the unified build, didn't they?
WTF?
EDIT: new build posted:
Latest CM12.1 Source
Powered by Microsoft?
Signal Strength Fixed!
Network Name Fixed (No more "Roaming Indicator Off")
Meticulus said:
WTF?
EDIT: new build posted:
Latest CM12.1 Source
Powered by Microsoft?
Signal Strength Fixed!
Network Name Fixed (No more "Roaming Indicator Off")
Click to expand...
Click to collapse
@Meticulus,
Flashed your 12.1 build with no problems on my xt1028 with 41.13 bootloader. Had screen flicker during boot and right after boot but lock/unlock screen fixed that. Also I like the Windows app drawer icon. I do notice that signal screen is fixed(exclamation point for a few seconds but goes away) but there is no 3g in the signal bar. I am able to make and receive calls and I do have mobile data. However, in "mobile network settings, "data while roaming" is on by default I guess and when I turn it off I lose mobile data. I am not able to select 3g in preferred network.
Overall though, great job! :good:
starkly_raving said:
CM already merged the CDMA fixes for the unified build, didn't they?
Click to expand...
Click to collapse
source? if that's the case, we would be able to download an official CM12.1 rom from cyanogen directly, with OTA support, correct?
empathyislost said:
source? if that's the case, we would be able to download an official CM12.1 rom from cyanogen directly, with OTA support, correct?
Click to expand...
Click to collapse
I don't think official nightlies have started yet but I read its gone from "CM12.1 staging branch" to "CM12.1 branch" so I'd guess we'll be seeing nightlies soon enough. Personally I like unofficial builds for the device specific attention and the optimizations be it Linaro or Saber etc. [emoji4] [emoji106]
Meticulus said:
WTF?
EDIT: new build posted:
Latest CM12.1 Source
Powered by Microsoft?
Signal Strength Fixed!
Network Name Fixed (No more "Roaming Indicator Off")
Click to expand...
Click to collapse
Amazing work sir. I tested Cody's build last night and was amazed by the speed compared to the stock soak, 5.1 is definitely a big improvement from 5.0.2...
Wondering if the sms bug is still present, because on Cody's build, Google Messenger refused to show any texts, but they were present in cm's Messaging (restored from an xml backup)
Another thing I ran into as I decided to wipe&restore back to soak backup, SystemUI wouldn't start, I'm not sure if it was a restore problem, I even tried pushing with adb and it still refused to start... Whatever the case, I had to wipe and reflash the partition updater&soak zip.. Maybe I am flashing or doing something wrong.. Any advice would be appreciated..
Anyways, looking forward to testing your build, but will wait and see what other users experience with it before doing so
@Meticulus so the signal strength is fixed in the status bar but there's no 1X/3G indicators?
starkly_raving said:
I don't think official nightlies have started yet but I read its gone from "CM12.1 staging branch" to "CM12.1 branch" so I'd guess we'll be seeing nightlies soon enough. Personally I like unofficial builds for the device specific attention and the optimizations be it Linaro or Saber etc. [emoji4] [emoji106]
Click to expand...
Click to collapse
i do like the unofficial build support (shoutout @Meticulus!) for the same reasons, but it would be fantastic if the falcon builds on cyanogenmod.org worked for our red-headed falcon and updates were as easy as OTA.
empathyislost said:
i do like the unofficial build support (shoutout @Meticulus!) for the same reasons, but it would be fantastic if the falcon builds on cyanogenmod.org worked for our red-headed falcon and updates were as easy as OTA.
Click to expand...
Click to collapse
(CM12)Should be working OK for the CDMA falcon. The commits for the CDMA fix were in since the 3/29/build I believe. You can check the official thread to be sure or look at the falcon commits/changelog.
---------- Post added at 10:59 AM ---------- Previous post was at 10:58 AM ----------
Downloading now to take this for a spin. 5.1 made a huge difference on my N5 hoping for the same here.
starkly_raving said:
@Meticulus so the signal strength is fixed in the status bar but there's no 1X/3G indicators?
Click to expand...
Click to collapse
On my xt1028 with the 41.13 bootloader there is no 1x/3g in the signal bar but there is mobile data. Also on the lockscreen in the upper left hand corner there are the numbers "00000" where "roaming indicator off" used to be.
starkly_raving said:
@Meticulus so the signal strength is fixed in the status bar but there's no 1X/3G indicators?
Click to expand...
Click to collapse
I will try to have that fixed next build...