Well i was trying to flash SC v7 and was following the steps as directed, Installed Bootmenu Manager and downloaded the bootmenu files and gave me error about logwrapper.sh and i ignored it and selected custom recovery mode. Since then am stuck in bootanimation and it wont go beyond boot animation so is there a possible Soln?
And when i try to reflash the stock ICS i get an errorassert failed apply patch check("system/app/AABSync.apk". and so on so installation aborted
Is there a fix for Getting back to stock ICS..
THX in advance..
kc92iyngr said:
Well i was trying to flash SC v7 and was following the steps as directed, Installed Bootmenu Manager and downloaded the bootmenu files and gave me error about logwrapper.sh and i ignored it and selected custom recovery mode. Since then am stuck in bootanimation and it wont go beyond boot animation so is there a possible Soln?
And when i try to reflash the stock ICS i get an errorassert failed apply patch check("system/app/AABSync.apk". and so on so installation aborted
Is there a fix for Getting back to stock ICS..
THX in advance..
Click to expand...
Click to collapse
You have to use the patched fxz. You will have to use the proper fxz and patch it with the pieces from the Chinese forum that posted here a week or so ago... that is what I used to make the US AT&T version script that I posted. You can't use the ICS OTA as a backup.. it is a patch for 2.3.6 ONLY.
This one:
http://forum.xda-developers.com/showthread.php?t=1799702
This is just a patch that you apply over YOUR proper 2.3.5 fxz.
Well am now on 2.3.6..
THX again.
kc92iyngr said:
Well am now on 2.3.6..
THX again.
Click to expand...
Click to collapse
How can you be at 2.3.6 and flash scv7? that is ONLY for people on ICS?
Just go to the noob thread and follow the fxz instructions for 2.3.6.
NO i was on 4.0.4 and by the time i replied i had fxz back to 2.3.5 and ota to 2.3.6..
Related
i want to flash back to the froyo baseband to flash the newline v3 rom but i can't get it done...
i treid the 2 diffrent options they give on the forum but these don't work for me.
does somebody know another way to get the froyo baseband??
Just flash one of the official froyo ROMs and it comes with the baseband, then root it, CWM it and install over the top
Its what I had to do when not being able to get just the baseband to flash
If you are flashing from GB back to froyo then you can't do it w/o first flashing to stock froyo via lgtool.
Step 1
http://forum.xda-developers.com/showthread.php?t=1244490
Dont bother with the cable since the standard cable which comes with O3D is fine.
Step 2
Root the phone and install CW
Step 3
Boot in recovery do all the wipes and install the acura v3 froyo...
i treid it like the link tells me but that doesn't work for me.
3dspeed said:
i treid it like the link tells me but that doesn't work for me.
Click to expand...
Click to collapse
What you need is:
-Download kdz v10x Rom (Latest one suffers from rebooting issue when setting wifi sleep policy to never).
- Flash it using adixstra tutorial:
http://forum.xda-developers.com/showthread.php?t=1287236
And do not forget to apply this tutorial in order to get it flashing:
http://forum.xda-developers.com/showthread.php?t=1473781
Note: If you got a bootloop after flashing back to froyo, just turn off the device, boot into recovery and wipe data.
You can download all official kdz files from here:
http://lg-phone-firmware.com/index.php?id_mod=2
Here is an easy guide for flashing:
http://forum.xda-developers.com/showthread.php?t=1186406
Last night (27-3-2012) I had a notification pop up on my stock 4.0.3 (rooted with AIR kernel) Nexus S. It was a notification for an OTA 4.0.4 update. I downloaded it (it was about 17.5 megs) and when I tried to update it, it gave an error saying the package couldn't be verified (or something to that effect). I tried searching the SDcard and system folders for the update but couldn't find one. I tried to go to settings and recheck for update but nothing comes up. My wife has the same phone (a Nexus S) and she didn't get a notification and nothing pops up when I do a check for update. I'd love to find the update file and upload it for you guys but I just can't find the bugger. Anyone have an idea where to look? It was late and I didn't take any screen caps cuz I though Google was finally rolling out ICS 4.0.4 but I can't find anything online about this latest update. Any ideas?
EDIT: This is for GSM Nexus S's, NOT Nexus S 4G. My wife and I each have a GSM Nexus S with T-Mobile.
EDIT 2: See Meisze's post for the link. I'll flash it as soon as it downloads and I'll post some info.
EDIT 2.5: I tried to update but got Status Error 7. I'm going to flash the full 4.0.3 update, then the lite 4.0.4 update and that should work.
EDIT 2.5.5: ok, I get Status Error 7 when i try to flash the full stock 4.0.3 update. I'm going to flash 2.3.6 -> 4.0.3 -> 4.0.4 and see if that works.
EDIT 3: WARNING YOU CAN BRICK YOU'RE PHONE! I bricked mine in the process and just got it working again. I was trying to flash the 4.0.4 lite update and it kept saying Status Error 7. So I restore a backup of the phone from 2.3.6. Without rebooting I then flashed the full 4.0.3 update (ot error 7) and then the lite 4.0.4 (again, no error 7). I reboot and nothing... No Google/lock logo, no recovery, no fastboot nothing. I used Adams tool and get into fastboot. I tried flashing CWM recovery and still nothing.
I fixed it by doing this.
1. Used Adam's toll to get into fastboot. Adam's UnBrickable Resurrector program for Linux http://forum.xda-developers.com/showthread.php?t=1397393 I used Backtrack 5 (Based on Ubuntu)
2. ran fastboot boot recovery.img (Flashed latest CWM touch recovery 5.8.0.2, renamed to recovery.img)
3. In CWM ran the stock 2.3.6 full update
4. Rebooted and everything was back to normal.
5. Went back into CWM, Flashed stock 4.0.3 full
6. Rebooted, everything still fine...
7. Went back to CWM flashed stock 4.0.4 lite
8. Rebooted and everything is working great.
Funny you mention it because I saw this today...
http://www.androidcentral.com/motorola-xoom-wifi-receiving-android-404-update
I found it from miui China : http://www.miui.com/thread-504894-1-1.html
Niiiice!
I flashed it.It is booted now.
To flash it you have to be on 4.0.3. stock unrooted
it is android 4.0.4 IMM76D
baseband I9023XXKI1
kernel 3.0.8-g6656123
so it has a new kernel
browser now works as it should have worked in 4.0.3 now it is fast smooth and no white pages.
Recovery works
same here =)
A.W.E.S.O.M.E !
Sent from my Nexus S using Tapatalk
oops, Iforgot I'm running the 4.0.4 leak. Can't update now.
Sooo if I get back to stock 2.3.6 I will get the 4.0.4 otA?
make pics and post it here! please
need root for that?
thegtfusion said:
Sooo if I get back to stock 2.3.6 I will get the 4.0.4 otA?
Click to expand...
Click to collapse
Not necessarily. The link posted here is only for an upgrade from 4.0.3. No one has posted a link from 2.3.6 so it is possible they are pushing only the upgrade for now. These rollouts take time so you aren't guaranteed a notification until it is fully rolled out.
bozzykid said:
Not necessarily. The link posted here is only for an upgrade from 4.0.3. No one has posted a link from 2.3.6 so it is possible they are pushing only the upgrade for now. These rollouts take time so you aren't guaranteed a notification until it is fully rolled out.
Click to expand...
Click to collapse
Okayy. Did someone already flash it?? Im very scared for flashing ota's in cwm because the 4.0.3 ota hard brickes mine.. i managed to debrick it though
Sent from my Nexus S using xda premium
I flashed it form cwm on i9023. First i flashed the full 4.0.3 then the ota.
It works realy well. It is what the 4.0.3 should have been
faith in google restored
Can I do it for my non-rooted Stock 4.0.3? How? And is this country specific update?
Wont work for me, I get the same error message as the OP, running stock 4.0.3 GSM model.
moon-unit said:
Wont work for me, I get the same error message as the OP, running stock 4.0.3 GSM model.
Click to expand...
Click to collapse
What model do you have? What did you use to flash it?
bozzykid said:
What model do you have? What did you use to flash it?
Click to expand...
Click to collapse
I9020 stock 4.0.3 not rooted and stock recovery
ishkibble said:
I tried to update but got Status Error 7. I'm going to flash the full 4.0.3 update, then the lite 4.0.4 update and that should work.
Click to expand...
Click to collapse
Me too. I think it complained about CRC error on Phonesky.apk.
assert failed: apply_patch_check("/system/app/Phonesky.apk, ...
try to flash the full 4.0.3 update first...
When i updated to 4.0.3 from 2.3.6 my phone could nothandle the diff update.. I had to flash 2.3.6 again after it worked
vick33 said:
try to flash the full 4.0.3 update first...
Click to expand...
Click to collapse
Writes bootloader and radio only. Then I get file_getprop: failed to stat "/system/build.prop": No such file or directory
Edit:
Had to first install the complete 2.3.6, and then the complete 4.0.3, and now the 4.0.4 patch goes through without errors.
Hello,
My friend has an LG Optimus 3D running stock froyo which i rooted for him and installed ClockworkMod Touch Recovery 5.8.1.5. Everything was fine until a notification for an upgrade to gingerbread was available and he clicked install.
Now the phone can only boot into recovery. I tried to restore a previous backup, flash the zip of a froyo rom. But to no avail.
Any idea what might be cause and solution?
Thanks in advance
UPDATE: I connected to adb and gave the command "adb reboot-bootloader" and it still boots into recovery. Is it normal?
UPDATE 1: I tried using the LGMobileUpdate tool to install the update in the hope that it solved the problem, it detects the phone, downloads and extracts the rom, start the update process and then gives a connection error. The error isn't given during the detecting phone phase but when it start to apply the update.
Bump... Please, anyone?
Try flashing an entire ROM. The kernel may be botched.
Sent from my Samsung Galaxy S II w/ CM9
The Dark Lestat said:
Try flashing an entire ROM. The kernel may be botched.
Sent from my Samsung Galaxy S II w/ CM9
Click to expand...
Click to collapse
Thanks for your reply
I have already tried to install through clockworkmod the zip of the stock froyo rom (from the thread of official roms). Nothing changes. Neither restoring a backup from clockworkmod changed anything.
As I remember that the kernel is part of the rom zip, I think the problem is more low level.
Tomorrow I'll try doing this http://forum.xda-developers.com/showthread.php?t=1244490
Any other suggestions or ideas?
UPDATE: Followed the guide here http://forum.xda-developers.com/showthread.php?t=1540163 and managed to flash the kdz of v21a. Problems solved
KrisInfinity said:
Thanks for your reply
I have already tried to install through clockworkmod the zip of the stock froyo rom (from the thread of official roms). Nothing changes. Neither restoring a backup from clockworkmod changed anything.
As I remember that the kernel is part of the rom zip, I think the problem is more low level.
Tomorrow I'll try doing this http://forum.xda-developers.com/showthread.php?t=1244490
Any other suggestions or ideas?
UPDATE: Followed the guide here http://forum.xda-developers.com/showthread.php?t=1540163 and managed to flash the kdz of v21a. Problems solved
Click to expand...
Click to collapse
try installing stock rom with lg app then reroot and install custom rom
Sent from my LG-P920 using xda premium
Hi everyone i have never flashed before.
I have atrix2 att 2.3.5.
I deleted bloatware and wanted to goto stock and then start applying roms.
I followed the guide for flashing and installed bootstrap, CWM, and J.Y.Daddy's BOOT INTO CWM RECOVERY ON BOOT, and also reset.zip.
Knowing that without bloat there is no chance to go 2.3.6 i followed these steps but when i booted the phone it has a new notification bar etc, but when i checked the about phone iam at 2.3.6
55.13.25
build number is SuperCharged V 5 Update1
So what now? is it normal, or am i in a bad situation?
RaXxaa said:
Hi everyone i have never flashed before.
I have atrix2 att 2.3.5.
I deleted bloatware and wanted to goto stock and then start applying roms.
I followed the guide for flashing and installed bootstrap, CWM, and J.Y.Daddy's BOOT INTO CWM RECOVERY ON BOOT, and also reset.zip.
Knowing that without bloat there is no chance to go 2.3.6 i followed these steps but when i booted the phone it has a new notification bar etc, but when i checked the about phone iam at 2.3.6
55.13.25
build number is SuperCharged V 5 Update1
So what now? is it normal, or am i in a bad situation?
Click to expand...
Click to collapse
Along with just about every custom rom comes custom status bar icons, UI look/feel, etc. This is all a part of running custom roms rather than using stock Moto rom. Don't worry, this is what happens!
Sent from my MB865 using xda premium
Apex_Strider said:
Along with just about every custom rom comes custom status bar icons, UI look/feel, etc. This is all a part of running custom roms rather than using stock Moto rom. Don't worry, this is what happens!
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
True, but I am not sure he knew he flashed a rom.
You may have problems because you just installed a 2.3.6 system on top of a 2.3.5 kernel, among other parts. I did this forever, and it had some issues.
What you should do is fxz back to stock 2.3.5 (read the noob guide, this has been said how to do way to many times, if you don't understand it, search and read more). Then you can do the OTA update and install a rom again if you want.
Yes, i did not flash any rom yet, i was installing the CWM recovery on boot so i would not be in trouble if ever i flashed a rom, but iam already at 2.3.6 some how.
If this 2.3.6 has everything the ota 2.3.6 has then i can stay with this, if not then i will have to fxz stock 2.3.5 and ota again and will have to restore everything :s
RaXxaa said:
Yes, i did not flash any rom yet, i was installing the CWM recovery on boot so i would not be in trouble if ever i flashed a rom, but iam already at 2.3.6 some how.
If this 2.3.6 has everything the ota 2.3.6 has then i can stay with this, if not then i will have to fxz stock 2.3.5 and ota again and will have to restore everything :s
Click to expand...
Click to collapse
it does not have anything, and I promise that you flashed scv6 if that is what is showing as the build. you should fxz then ota
Hey there, So I got a problem. First off im not new to rooting and flashing custom roms been doing for some time now and im loving it. Heres my problem that I got on my rooted Atrix 2. I was running Gingerbread 2.3.6 then AT&T came out with Ice Cream so I did the update and before I updated message popped up and said once you update to Ice Cream you will no longer be able to switch to Gingerbread ok no big deal . So I updated everything went smooth. Phone rebooted started playing with the phone loved everything EXCEPT! I tried attaching picture to text message and if its to big to attach usually phone says to resize or cancel so I press resize and I get a message "saying message limit reached!?!" I never had no problem with Gingerbread so after using the new Ice Cream I decided to flash a rom 4.0.4 ICSupercharged Fixed Leak #2. Flashed rom no problem hoping it would fix the picture image resize problem NOPE! Still get same message. So I got pissed and got the 2.3.6 fxz.zip file and flash the phone BUT! while I was all hot! I forgot to BACK UP RECOVERY my phone. So after getting 2.3.6 back on my phone now when I turn my phone on it stay on at the Motorola Dual-Core screen sometimes restarts looping and just stays on same screen. So I know that in Android factory recovery I cant install any zip. files because they are not digitally signed so every time I try install update from sdcard I get error E: signature verification failed. I ran into this before but I had a back up made so I could recover phone. But not this time I need your help! Im stuck until I either have a signed custom image or stock recovery. Please help me I desperately need my phone to be back working. THANKZ!
Did you use one of the leaks from here or are you in the official ICS? If you're on the first leak, you can still get back to 2.3.5 or 2.3.6 safely. If you used the ota, or the second leak, I think you'll have to use the fxz found here:
http://forum.xda-developers.com/showthread.php?t=1961310
I just went to setting about phone and did check for update and Download ICS from AT&T installed it then I flashed the leak#2. I have the FXZ for 2.3.6 and 2.3.5 The FXZ worked when it was done the phone restarted and just loops and stays on Motorola Dual-Core Screen. I used the FXZ before and had this problem but last time I did a backup of the phone so after I used the FXZ I went into Stock Android recovery and used the back up. But another thing dunno but shouldnt the FXZ have a custom recovery/backup file in the zip. Oh and after doing the FXZ my phone is now unrooted says (S) that means its not rooted correct?
I got that FXZ from the link you gave me. Dont matter what zip I out and try to apply It says E: verification signature fail. Because its not Digital Signed.
white22b said:
I got that FXZ from the link you gave me. Dont matter what zip I out and try to apply It says E: verification signature fail. Because its not Digital Signed.
Click to expand...
Click to collapse
Wait, where are you trying to apply these zips from? Please tell me it is not the stock recovery. You MUST use bootstrap or bootmenu or similar to get CWM on your phone.
Fxz is to be used with rsd lite, not flashed in recovery. It'll return your phone back to stock, unrooted, no custom anything. After you use it you'll have to re root and install a custom recovery to flash any zips.
jimbridgman said:
Wait, where are you trying to apply these zips from? Please tell me it is not the stock recovery. You MUST use bootstrap or bootmenu or similar to get CWM on your phone.
Click to expand...
Click to collapse
Yes in stock recovery mode. Yea but can you install bootstap or bootmenu in stock recover mode its a APK file. I thought you can only install zip. files? And to root the phone i have to have it on and when you plug the usb cable to the phone you select charge only. I think I need someone to make a back up of their phone and send it to my email or something and then I can put it in my sdcard and go into recovery mode and try installing it.
white22b said:
Yes in stock recovery mode. Yea but can you install bootstap or bootmenu in stock recover mode its a APK file. I thought you can only install zip. files? And to root the phone i have to have it on and when you plug the usb cable to the phone you select charge only. I think I need someone to make a back up of their phone and send it to my email or something and then I can put it in my sdcard and go into recovery mode and try installing it.
Click to expand...
Click to collapse
If you can only get into recovery mode and can't boot you need to use the fxz. If you can boot into android, you install the bootstrap apk then allow it root permissions, and hit boot into bootstrap from within the app. You can then flash any ROM from there.
Sounds like you need to do some reading. I would not do any flashing or hacking until you learn the ins and outs of this phone. It is quite different from other phones since it has a locked bootloader.
Yea and now my phones battery is dead and I have a white LED light on?