Hey People.. I was running CM9 Alpha 11.. But my battery started misbehaving/draining.. so people told me to calibrate battery/ try clean install.. So first I tried clean install.. flashed xxkpe twice... but after that.. my phone is freezing after working about 2-3 mins.. then I have to remove by battery and start again. I have also tried wipe data/ wipe cache but to of no use.. WHAT TO DO PLEASE HELP ME... also after flashing xxkpe twice i thought of flashing ddlf2 so that maybe the freezing could be solved but it didnt helped... then again i flashed xxkpe but still it didnt solved.. Now my battery is draining plus phone getting freezed after 2 mins.. please help I am worryin and i have switched off my phone... PLEASE HELP
EDIT: One thing i remember maybe before flashin i forgot to turn on USB debugging.. is that problem?
anuragvivek93 said:
Hey People.. I was running CM9 Alpha 11.. But my battery started misbehaving/draining.. so people told me to calibrate battery/ try clean install.. So first I tried clean install.. flashed xxkpe twice... but after that.. my phone is freezing after working about 2-3 mins.. then I have to remove by battery and start again. I have also tried wipe data/ wipe cache but to of no use.. WHAT TO DO PLEASE HELP ME... also after flashing xxkpe twice i thought of flashing ddlf2 so that maybe the freezing could be solved but it didnt helped... then again i flashed xxkpe but still it didnt solved.. Now my battery is draining but phone getting freezed after 2 mins.. please help I am worryin and i have switched off my phone... PLEASE HELP
Click to expand...
Click to collapse
Did you do a "Fix permissions" from cwm recovery? If not, go to recovery>advanced>fix permissions.
You don't need to explicitly do a battery calibration. It will be calibrated automatically as you use it for few days. Let it drain to minimum and then charge to 100% these initial week. You'll start seeing better battery information after a couple of days.
I don't think you need to worry about your phone if it's not heating or giving you a lot of errors.
Hetalk said:
Did you do a "Fix permissions" from cwm recovery? If not, go to recovery>advanced>fix permissions.
You don't need to explicitly do a battery calibration. It will be calibrated automatically as you use it for few days. Let it drain to minimum and then charge to 100% these initial week. You'll start seeing better battery information after a couple of days.
I don't think you need to worry about your phone if it's not heating or giving you a lot of errors.
Click to expand...
Click to collapse
noo i didnt do fix permission.. as i did a fresh install i also dont have cwm.. NOW PHONE IS NOT STARTING instead a "KERNEL PANIC UPLOAD MODE" comes
Here is a link to a thread with users having similar issues.
http://forum.xda-developers.com/showthread.php?t=1348705&highlight=kernel+panic&page=1
See if it helps.
Hetalk said:
Here is a link to a thread with users having similar issues.
http://forum.xda-developers.com/showthread.php?t=1348705&highlight=kernel+panic&page=1
See if it helps.
Click to expand...
Click to collapse
no help from there.. maybe i should try a stock rom.. which is the stock rom in india.. stable one? kernel upload sometimes come. but hte phone always get freezed after 5 mins
Latest and most stable is ddlf2 ... The one before ddlf2 was ddkp3.
But for that you'll need to flash xxkpe twice (using all 4 files) using http://forum.xda-developers.com/showthread.php?t=1133787
Hetalk said:
Latest and most stable is ddlf2 ... The one before ddlf2 was ddkp3.
But for that you'll need to flash xxkpe twice (using all 4 files) using http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
i was earlier trying the same dude. but constant freezes came... and sometimes kernel panic upload problems.
If it still freezes after ddlf2 ... and you are still in warranty .. go straight to your nearest samsung service center and let them check it out.
Make sure you aren't rooted then.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
Another post I found with similar issue and resolved, as per the user
karimgsm
01-21-2012, 09:49
me too have same problem
iflash phone to 2.3.4 XXPE and root it
i enter phone to recovery mode and make :
wipe data
factory reset
and phone is working
Click to expand...
Click to collapse
Hetalk said:
If it still freezes after ddlf2 ... and you are still in warranty .. go straight to your nearest samsung service center and let them check it out.
Make sure you aren't rooted then.
---------- Post added at 02:05 PM ---------- Previous post was at 01:58 PM ----------
Another post I found with similar issue and resolved, as per the user
Click to expand...
Click to collapse
how to root xxkpe? where would i find?
You should be able to use the amit bagaria universal root from http://forum.xda-developers.com/showthread.php?t=1351056
No need to root to wipe data. In case you don't understand, there's stock recovery
Sent from my GT-I9003 using xda app-developers app
Related
Hey people.. earlier when i was using ICS there was battery problem.. so i flashed xxkpe but also it became freezing after that I flash ddlf2... the freeze problem stopped... Now again when I flash CM9 Alpha 11... it started freezing can anybody tell me whats the matter?
Give it a while to stabilise. I experience freezing occasionally on all rooms, sometimes even freezes 3 after 3 times I pulled the batt.
Sent from my GT-I9003 using xda app-developers app
bscraze said:
Give it a while to stabilise. I experience freezing occasionally on all rooms, sometimes even freezes 3 after 3 times I pulled the batt.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
till then what shall I Do? Switch back to ddlf2 again?
anuragvivek93 said:
till then what shall I Do? Switch back to ddlf2 again?
Click to expand...
Click to collapse
Anything will do, depends on which rom you like. If after 1 day it doesn't stabilise idk then.
Sent from my GT-I9003 using xda app-developers app
Wipe Cache/Dalvik and data.
DON'T use the device after the first boot, let it just sit there alone for 10 minutes, reboot it and start using it after, works for me everytime, i guess it's just cache regenerating all over again which can cause slow performance and can get corrupted sometimes causing freezes.
Skander1998 said:
Wipe Cache/Dalvik and data.
DON'T use the device after the first boot, let it just sit there alone for 10 minutes, reboot it and start using it after, works for me everytime, i guess it's just cache regenerating all over again which can cause slow performance and can get corrupted sometimes causing freezes.
Click to expand...
Click to collapse
i tried again today but the freezing dont stop as soon as I flash CM9 from ddlf2
can anybody help?
anuragvivek93 said:
can anybody help?
Click to expand...
Click to collapse
Did you follow the steps ONE BY ONE on the CM9 thread? you should use the flashing from stock method, all of the steps.
If you did that, try another base rom (XXKPU) and then flash CM9 on it.
Skander1998 said:
Did you follow the steps ONE BY ONE on the CM9 thread? you should use the flashing from stock method, all of the steps.
If you did that, try another base rom (XXKPU) and then flash CM9 on it.
Click to expand...
Click to collapse
i could have but last try i tried CM9 it was freezing and i put if offf.... Now the phone is not getting on ? Is phone bricked? i cant go into recovery or download
anuragvivek93 said:
i could have but last try i tried CM9 it was freezing and i put if offf.... Now the phone is not getting on ? Is phone bricked? i cant go into recovery or download
Click to expand...
Click to collapse
If it was working fine before you turned it off, it's probably not a brick.
Maybe it's a hardware failure?
Try using the reset button between the speaker and the camera and try to turn it on (Search to find pictures about it).
If that doesn't work, keep trying to access download, if that also doesn't work, it's probably hardware related, although that in my opinion would be weird.
I have flashed with chinmay_7d's RemICS v1.6 . Yeak it looks cool, but I am facing an issue. When I turn on mobile data usage, the phone will turn off after some time (5-6 minutes) and it is not possible to turn on the phone again . It is needed to plug in it and turn on and then only it is working. In this condition, it is showing android is upgrading. There is no problem with using internet while plugged in. Anyone know how to fix this...? I like this ROM very much and so if it if fixed, then that will be cool.
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
tavomt said:
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
Click to expand...
Click to collapse
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Not sure if I'm right, but I think the practical solution to your problem would be to perform a flash from 0 up KPQ or KPU (which are the most stable to install this ROM), it may be the modem or the base ROM you used (for 3 months I have this ROM and never gave me any problems with KPQ)
Another thing, have you tried testing with Dhiru CM9 Base? to see if the same thing happens?
alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Have you tried to fix permissions on CWM? I got some problems with it too. After fixing and installing 1.5.4 again no problem. Now I'm on 1.6 and all is fine...
@ tavomt :
I think I can directly flash to stock rom.
Please help me
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
alwinaugustin said:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
Click to expand...
Click to collapse
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
issobuddy said:
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
my baseband version is I9003DDKP3 . Actually i am using 2G and use 2G network is already ticked
alwinaugustin said:
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
Click to expand...
Click to collapse
The issue you are facing is exclusive to you. So i will not consider this a bug from my ROM.
I suggest you to follow correct flashing procedure. Wiping data before flashing a new ROM is a good practice.
It is possible that a third party app you are using is responsible.
Sent from my GT-I9003
Hmmm... but I have tried it also..now I think its better go back to stock . Can anyone give me the URL to download latest stock for our phone.....?
Sent from my GT-I9003 using xda app-developers app
alwinaugustin said:
Can anyone give me the URL to download latest stock for our phone.....?
Click to expand...
Click to collapse
Here?
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using xda app-developers app
Issue persists in Stock also
:crying::crying::crying:
The sad thing is that the problem persists after flashing stock ROM also. I have first flashed to XXKPE and then to XXKPU using Odin as given in the following link
http://blog.vigitalsolutions.com/2012/08/18/upgrade-samsung-galaxy-sl-i9003-to-cyanogenmod-9-cm9/
The issue is there in both the stock ROMS. Actually this issue was not present before. Now don't know what to do. I am only able to connect to internet in plugged in state.
Some times it turns off during call also .
:crying::crying::crying:
Hi All,
I am using Samsung Galaxy S3 with CM 10.1 with a version CM 10.1_20121220-NIGHTLY-d2att, it is working fine till now, once I made an upgrade to later versions , it is doing reboots after screen off. Also sound related apps are not working. Current version I tried is CM_10.1-20121229-NIGHTLY-d2att, still same issue.
Does anybody ran into this issue ?
Please let me know the solution ?
Try search this on google or on these forums!
xxXismakillXxx said:
Try search this on google or on these forums!
Click to expand...
Click to collapse
i search for it, there is no proper solution . If you get it can you forward me .
Thanks
Can you get go to recovery mode?
xxXismakillXxx said:
Can you get go to recovery mode?
Click to expand...
Click to collapse
No, sorry. If you have a solution post it.
Android_Geeek said:
No, sorry. If you have a solution post it.
Click to expand...
Click to collapse
I tried to reload the other images(recent 20121230 also, by the way i can get into recovery mode.
something wrong happened to sound related module and it is causing reboot whenever screen turns off,
current version running CM 10.1 20121220 manually loaded the software not through updates from CM updater.
is anybody there to help me on this situation
This usually happens to me when I set the CPU speed too high.
Stankia said:
This usually happens to me when I set the CPU speed too high.
Click to expand...
Click to collapse
Now with CM 10.1 20120104 onwards sound related apps are working fine...but not stopping reboot after screen turns off. I tried several ways its still not working.
does it could be the reason of jumping Kernel version from 3.0.50 to 3.0.57, CPU ARMv7 Processor ??
Does my hardware supports it ?
does anybody ran into this issue please help me ?
I tried the latest nightly versions too, still having same issues.
Using nightly builds on my note 2 only issue so far is the bluetooth headset not working
Sent from my GT-N7100 using xda app-developers app
Android_Geeek said:
does anybody ran into this issue please help me ?
I tried the latest nightly versions too, still having same issues.
Click to expand...
Click to collapse
Have u done a full wipe and reflash? Always do that first
brandonarev said:
Have u done a full wipe and reflash? Always do that first
Click to expand...
Click to collapse
yes i have done wipe and re flash also, still its not working after CM10.1 20121220.
Android_Geeek said:
yes i have done wipe and re flash also, still its not working after CM10.1 20121220.
Click to expand...
Click to collapse
Have you tried flashing back to stock, then a complete wipe (including system) and reflashing from there?
---------- Post added at 02:28 PM ---------- Previous post was at 02:05 PM ----------
Android_Geeek said:
does it could be the reason of jumping Kernel version from 3.0.50 to 3.0.57, CPU ARMv7 Processor ??
Does my hardware supports it ?
Click to expand...
Click to collapse
Are you using stock kernel - I've had this problem with Devil kernel and it's related to Deep Sleep being enabled. Try a wipe and reflash though with stock kernel.
Thanks for the information.....between i hard bricked my phone when i flashed a wrong CWM.
Before this i have tried to upgrade to CWM 6.0.2.7 from 6.0.1.2, it doesn't work.......stay on the first screen of recovery mode and turned off.
After this trail i tried a incompatible CWM 5.0.8.5 and i turned off the phone to get back to download mode and reflash the working one 6.0.1.2 .....thats it.....it is dead onwards......i hard bricked my phone......
I tried to bring back the mobile with linux mehod of QHUSB_Dload ....succeeded to bring the usb driver but not into download mode to reflash again........
sanguinesaintly said:
Have you tried flashing back to stock, then a complete wipe (including system) and reflashing from there?
---------- Post added at 02:28 PM ---------- Previous post was at 02:05 PM ----------
Are you using stock kernel - I've had this problem with Devil kernel and it's related to Deep Sleep being enabled. Try a wipe and reflash though with stock kernel.[/QUOTE
can you tell me how to flash back to stock please.....
i tried the several CWM's but the phone is rebooting after phone screen times out
Click to expand...
Click to collapse
Ok so it is like this:
I bought my galaxy r here in sweden 1 year and 3 months ago, it was working perfectly for around 1 year.
At the one year mark i started to have some problems with the touchscreen where the phone would feel a pressure in the middle of the screen, to get rid of this i simply locked and unlocked the phone or rubbed a bit with a cloth on the screen.
Recently when I saw there was a cm10.1 rom with nightlies I rooted my phone and later installed the cm10.1 rom. Now the most anoying thing. I have a problem with my battery where the phone just shuts down randomly (mostly when playing games) even though it sometimes have up too 80% battery remaining. Then when I restart the phone it usually have 0% battery left and therefore shuts itself down again, sometimes it restarts with just a 20-30% batteryloss. This have occured more often recently and it shuts itself of 3-4 times a day. I can't remember if it was like this when i was on stock, before I started to flash and root, but i think it was.
A few days ago i flashed stock ics from odin and I confirmed that both of these problems still were there, so i have hard to belive that it is the modding of the software that have caused this.
Do you guys have any suggestions to how i can be able to use my phone normally again?
Im just a poor student so i don't want to waste money on a new phone after just 1 year :/
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Will this help with the battery?
kataria.vikesh said:
wipe data and cache..i think after flashing u restore ur data back.
Sent from my GT-I9103 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Will this help the crashing/battery?
DippN said:
Will this help the crashing/battery?
Click to expand...
Click to collapse
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
kataria.vikesh said:
It may be help you but first tell me, are you restoring data from titanium backup or something related to that..??
Also if you want to take backup then take it using Super backup application.
Click to expand...
Click to collapse
Nope, im not takeing backup of anything.
And one other thing i forgot to mention earlier, the phone now also thinks it is charging itself evrn when it is not. It think the usb cable is still connected.
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
DippN said:
Im just glad im not alone with this problem, and as you said, its barely unusable without having it plugged in.
Click to expand...
Click to collapse
paKS7 said:
I hope OP doesn't mind that I'm joining his thread, I'm experiencing the same problems on my gfs phone and don't know what to do.
I just installed the fresh CM 10.1 nightlies (did Cache/Data/Dalvik Wipe) and she is experiencing pretty much the same problems:
After 1 or 2 hours of unplugging the phone gets stuck and shuts down. After restarting the battery percentage is pretty low and the phone shuts down again (even if the battery says ~10%). The battery percentage then changes every restart, but is always between 0 and 20%. The phone is barely usable in this state :/
I couldn't wipe the SD card (.android_secure) because the swapped paths, could this be related?
Thank you in advance!
Click to expand...
Click to collapse
Both of you install CM10.1 using Procedure no 2 from OP.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Will try that when i get home, thx.
kataria.vikesh said:
Both of you install CM10.1 using Procedure no 2 from OP.
Click to expand...
Click to collapse
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
paKS7 said:
Thank you, vikesh! I'll be able to try Procedure II tomorrow afternoon.
Click to expand...
Click to collapse
Sadly, I can confirm that this did not change anything.
The problems are still there :/
DippN said:
Sadly, I can confirm that this did not change anything.
The problems are still there :/
Click to expand...
Click to collapse
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
DippN said:
I'm definitely going to try this, but as it seems now i think it is more about a faulty battery/hardware that software?
Or have these kind of problems been fixed software before?
One other thing, if i have rooted my device, does the root dissappear when i flash stockrom using odin?
Click to expand...
Click to collapse
May be hardware or software too..when you will vanish all data & cache then Software issue may be gone but if problem still persist, means you have hardware problem.
Also, root will be lost after flashing Stock ROM from ODIN.
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
paKS7 said:
I'm able to also confirm, that Procedure II didn't help the problem. I really doubt it is a hardware fault, because of us two having the exact same problem after flashing the same rom.
@Dippn: Do you know which nightly build you used? In my case it was the nightly build "20130405". Also could you check which baseband you are on? (Under About Phone -> Baseband Version) Over here we have i9103NEKI1
The only special thing we did I can think of is flashing a modem file (when we were still on the unofficial cm10.1 without these kind of problems, but massive battery drain), because there was a call problem going on for customers of the austrian provider 3 and CM10.1.
I could analyse the problem a bit more today: It seems as soon as the phone gets busy (for example from the browser loading pages or in DippN's case processing a game), the touch screen gets unresponsive and everything starts to lag and delay or freezes completely until it shuts down the phone. Could be either CPU or RAM related, I guess. I just wonder what caused this, even if the nightly had a faulty kernel, this should be fixed as soon as we flash another ROM, right?
I will be able to try a different ROM on monday. It would be great, if you could report, if the downgrade to GB helped the issue. I'd like to try a different baseband, if you are on the same right now too.
Greetings and thank you so much for trying to help us, vikesh!
Click to expand...
Click to collapse
Well, we are not on the same baseband. I'm on I9103XXLQ3.
About the cm verison im not quiet sure, the latest i flashed was "20130406" but since the problem were there the time before that when i flashed cm I cant answer exacly but i have a cm version "20130305" on my desktop and it could be that one that I used.
I never used cm before it was on nightlies so the modem file flashing i dont know anything about.
The thing you mention about that it shuts of when the phone gets busy and touchscreen gets unresponsive I can kind of confirm too.
I will flash GB now, will report back in an hour how it went.
kataria.vikesh said:
It shouldn't be happened. But if u are feeling so, just flash any stock GB using odin v1.87. Then just wipe all data and cache. Install cm10.1 over that using method 2.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
DippN said:
Are you sure i should do it using v1.87?
I'm having problems finding it and v1.85 seems to be in everyones links.
Click to expand...
Click to collapse
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
DippN said:
Flashed GB using v1.85 and now I am stuck in bootloop, after 10 sec at the samsung logo it restarts and repeat. >.>
When the phone restarted after the flash and after it says "-updating application" it says:
Installing Multi-CSC
Can't access to '/system/csc/NEE/system/'.
Successfully applied multi-CSC.
I have no idea what this means but could it mean anything?
EDIT: I got it to start by wipe cache and data. (thought i should do that when cwm was installed)
Unfortunately already in the startup options when u write wifi password the touchscreen became very unresponsive and when i after a few min had succeded writing the password the phone shut of when it tried to connect to it! :,(
I can also confirm that it still thinks it is charing when it is not becuase the symbol in the statusbar flicked from battery to charging symbol.
Is there anything else softwarerelated that I can do?
Click to expand...
Click to collapse
Wipe data again.. If possible after wiping data Just reflash the GB.
hi,am having galaxy tab 2 p3100 and i was running 4.1.2 official firmware, later i rooted it .. ..i again flashed the 4.1.2 firmware downloaded from sammobile without unrooting it. i faced a new prob. device got restarted automatically.. i was frustrated and then i downloaded the 4.2.2 firmware for france from sammobile n flashed again... i did a factory reset. but cudn do wipe cache partition. even then it restarted once or twice. third time wen it restarted it showed me the initial samsung screen which wil come after flashing. i was shocked. al d applications returned to previous versions and i got to update again. i cudn wipe cache partition yet.. kindly help me to solve this problem...
Flash CyanogenMod recovery. Format data, cache, everything, and then install the firmware from sammobile.
Samsung ROMs tend to get the auto restart problem after using them for a bit of time (personal experience).
Install CM10.2 if possible, works like a charm!
-Divyanshu
divyanshu.grover said:
Flash CyanogenMod recovery. Format data, cache, everything, and then install the firmware from sammobile.
Samsung ROMs tend to get the auto restart problem after using them for a bit of time (personal experience).
Install CM10.2 if possible, works like a charm!
-Divyanshu
Click to expand...
Click to collapse
thank u
Mark it as closed.
mukkani said:
thank u
Click to expand...
Click to collapse
Welcome. Please mark it as closed.
---------- Post added at 11:53 AM ---------- Previous post was at 11:47 AM ----------
Also, click on the "Thanks" button in the relevant post.