Related
Quick review, sorry I don't have batteries for my digital camera right now, so no pics.
What I bought - I bought a "Crystal Gel TPU Case" in the glossy black variety. The case is flexible, but it keeps it's shape like a hard plastic case. I wanted this type of fit because I had a hard plastic case from the same company and it was damn-near impossible to get off when I had to pull my battery one time.
I paid $8.99 + free shipping. They do have some on sale for less.
The Company - They had contacted me on Twitter at one point, one of those advertisement Tweets. The key was, they offered me free shipping on their products using the code "twitter". So I figured I'd give them a go.
So far, after two orders, I'm pretty pleased. The second order did take a day longer than the first to have processed before it shipped, but I knew from receiving my first order that they were a home-based, small time ordeal by the packaging the first case I ordered came inside (hand-written address and what-not).
Shipping took 3 days both times. I'm in VA, I think the company is in Jersey.
Fit - Fit's perfectly. It's not too tight like the hard plastic cases out there, and it's not loose at all, nice and snug.
Protection - Not the best. You basically get outer case protection, and I would imagine that it's not as good as a hard plastic case.
Look - I bought the glossy black case, which I thought would be a dust and finger print magnet, but it's not too bad.... for dust that is. It does get smudges, but it's a case, I'm not too worried about it.
Overall - 7/10 Good buy for the price. You can get free shipping using the coupon code "twitter" at checkout.
Check them out - cimousa.com
I bought something similar called the Crystal Clear Case off of ebay. About the same price with the same checkerboard pattern on the back of it and I can tell you that it will turn yellow after a couple of months like old plastic does . It's not like a rich yellow but you can see where it starts tinting yellow. I didn't even bother asking for a replacement since it was through eBay and I don't think they'd do it anyways.
Well, GL.
I'm sure it could do that, It's very cheap. I'm buying a case mate case for my n1 after I have enough money to justify a $30 phone case lol
jerhoyet said:
Quick review, sorry I don't have batteries for my digital camera right now, so no pics.
What I bought - I bought a "Crystal Gel TPU Case" in the glossy black variety. The case is flexible, but it keeps it's shape like a hard plastic case. I wanted this type of fit because I had a hard plastic case from the same company and it was damn-near impossible to get off when I had to pull my battery one time.
I paid $8.99 + free shipping. They do have some on sale for less.
The Company - They had contacted me on Twitter at one point, one of those advertisement Tweets. The key was, they offered me free shipping on their products using the code "twitter". So I figured I'd give them a go.
So far, after two orders, I'm pretty pleased. The second order did take a day longer than the first to have processed before it shipped, but I knew from receiving my first order that they were a home-based, small time ordeal by the packaging the first case I ordered came inside (hand-written address and what-not).
Shipping took 3 days both times. I'm in VA, I think the company is in Jersey.
Fit - Fit's perfectly. It's not too tight like the hard plastic cases out there, and it's not loose at all, nice and snug.
Protection - Not the best. You basically get outer case protection, and I would imagine that it's not as good as a hard plastic case.
Look - I bought the glossy black case, which I thought would be a dust and finger print magnet, but it's not too bad.... for dust that is. It does get smudges, but it's a case, I'm not too worried about it.
Overall - 7/10 Good buy for the price. You can get free shipping using the coupon code "twitter" at checkout.
Check them out - cimousa.com
Click to expand...
Click to collapse
Actually i think the soft case would have better protection. hardcases just transmit the force right through with little dampening but the soft rubber/plastic would absorb a lot of the impact.
I like the tpu case more because the silicone stuff attracts lint and doesnt slide in and out pockets as well. They also dont stay on as well a a good tpu case.
i ordered one up also....great price $8.60 CAD includes shipping
Over been using this case for about a month now and I have nothing but great things to say about it. The fit is great and it doesn't add too much bulk. The argyle pattern on the back is beautiful too. I love the smoked color and how its partially see through which allows me to put my contact information on a sticker on the phone and have it show through; 100000X better than an engraving. And you can't beat the price, I think mine was about 8 or 9 bucks with shipping!
I will start this review by saying that I have owned a variety of different phones ( i get a new phone every 5-6 months) and with each of these phones i buy an expensive case (roughly 20-30 dollars)
The Case-Mate Tough Case beats them all.
I read every review on this board and decided to go with the Blue and Black Case-Mate Tough Case and it has been great.
The included screen protector is a great touch and the hard plastic and soft silicon allows for a great feel and great protection.
The case is easy to take off and looks great (the colors really make the phone unique because you do not see a high quality case that comes in different colors for any phone, many people were impressed when i pulled out my phone asking to feel it and hold it)
Three of my buddies all have Nexus Ones and they all ordered the Tough Case in different colors, two of my buddies were using Otterbox and they both agreed that the Case-Mate was not only more ergonomic it just looked and felt better and did not add the extra bulk the Otter did. Even tho I have never used an Otter extensively I do agree with their impressions just from holding their phones and holding mine and comparing them.
i 7use the tough case too and i gotta say, its great
I'm going to agree that it is an awesome case and I'm glad I decided to purchase it, especially over the otter box. I am going to disagree with the supplied screen protector. It was crap. I love the clarivue ultra clear protector, Its reusable, washable, no adhesive (static based) and You can't even tell I have it on. Ultra smooth, ultra clear, no glue.... awesome.
Sent from my Nexus One using XDA App
I have one ordered and it should be here next week. I need a holster for mine. Do you all know of one that will fit this case? Will the Seidio holster work for it? Thanks.
I have the black/black case mate tough case. The only and i mean only problem i sometimes have is that when I put the phone back into the hard shell, sometimes its hard to get the volume down button to work. That can be fixed by doing a little adjusting. I love this case and I wouldn't own anything else...
you guys got me interested in this case. how bulky does it make the nexus looks? the black/red looks pretty hot.....
I want it, but its cheap shipping option says it will take 3-4 weeks to Canada
even the $20 shipping says 8-14 days and with fedex... I pay brokerage..... why can't they do usps expedited?
tigerin said:
you guys got me interested in this case. how bulky does it make the nexus looks? the black/red looks pretty hot.....
Click to expand...
Click to collapse
It does add a little bulk, i'm not going to lie to you. However, in return your getting a sexy case plus a ****load of protection. You just simply can't go wrong with buying one of these cases. You definitely get what you pay for.
Mr.Kakarot said:
I want it, but its cheap shipping option says it will take 3-4 weeks to Canada
even the $20 shipping says 8-14 days and with fedex... I pay brokerage..... why can't they do usps expedited?
Click to expand...
Click to collapse
In the UK, prices were best from eBay/Amazon market place... I paid £16.90 shipped for mine.
i<3myphone said:
I have one ordered and it should be here next week. I need a holster for mine. Do you all know of one that will fit this case? Will the Seidio holster work for it? Thanks.
Click to expand...
Click to collapse
i use the nite ize holster with the tough case. http://www.niteize.com/collections/rugged-phone-cases/products/clip-case-cargo-medium
I bought black/blue on Friday. Tracking says it will be here today. I was going to write a review, but you beat me to it!
I report back to say if I like it or not.
To those who ask about bulk. Its adds a little bulk, but not as much as the otter box. Not even close if you ask me. And personally I feel the phone fits better in my hand with the case on. It doesn't feel like it will slip out.
Oh and the tough case gets double props for being able to buy the colored rubber inner sleeves separately without buying a whole new outer hard case with it.
Sent from my Nexus One using XDA App
i honestly like the otterbox a lot better. its probably type of protection but i like that the ports are covered. u never know when something might get in there
My only gripe with the Case-Mate tough case and this is extremely minor is that because the hard case does not entirely cover the soft case, any lint that you might have in your pocket is attracted to the soft case.
Whenever I put my case in my pocket, it always attracts a little dust. Not enough to warrant getting a new case, but something that you should be aware of.
I used to use the Seidio Innocase II Surface, but it would keep cutting into my invisibleshield which ended up getting scratched off on the sides.
I definitely do love the case-mate though.
android01 said:
i use the nite ize holster with the tough case. http://www.niteize.com/collections/rugged-phone-cases/products/clip-case-cargo-medium
Click to expand...
Click to collapse
I took a look at the cases after your linked that and im very impressed!
being an elevator mechanic i snag my phone case on just about everything and have spent far too much money on holster. Does the medium size work well for you? i find that since the nexus one is a little longer then most bbs some cases the flap will not fold over at the top.
That case would suck for a nexus
Sent from my Nexus One using XDA App
Did you try the tracking app from android market?
Sent from my Nexus One using XDA App
I agree tough case by case mate is the best our there.
Sent from my Nexus One using XDA App
you guys got me sold on this case. jus ordered it on friday. i'm currently using the seidio innocase 2 w/ holster. i like the fit of it, but it really is tight on there. i literally have to use a knife to split it from the back just to take it off...
This case looks pretty neat. It's Pretty simple and minimalistic.
In Black
http://www.amazon.com/KaysCase-Cove...-3&keywords=KaysCase+Slim+Soft+Gel+Cover+Case
Smoked color
http://www.amazon.com/KaysCase-Cove...8&qid=1352668557&sr=8-2&keywords=nexus+4+case
Here's the variation for the iPhone 5. The reason I'm including this is because its not a cheap photoshopped picture/render. It's got decent reviews and looks pretty sexy!!
http://www.amazon.com/iPhone-Retail...-9&keywords=KaysCase+Slim+Soft+Gel+Cover+Case
Here's a review that is relevant for us from the iPhone variant. The price is just a dollar now with 4 dollars for shipping.
"The seller was one of the first to offer an iPhone 5 case, a full week before the iPhone 5 launch. They ran a promotion for about 85% off their regular price, and they promised launch-day delivery (Sep. 21), which I was very skeptical about. However, lo-and-behold, a few hours after UPS dropped off my iPhone 5, USPS had delivered my KaysCase"
I'm pretty excited about this!!
Very nice, its a shame about the 17th as the release date though. I will probably get the soft and hard cases.
This looks pretty good. I really want one as soon as I get my phone though and ordering this to the UK will take some time.
Lol anyone notice this:
KAY'S KNOWS ABOUT CASE Slip your Apple new Nexus 4 into this amazing KaysCase HardSkin case and instantly experience the sensual touch and barely added weight.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Yep, I got a chuckle out of that, as well as the headline for the next paragraph:
YOUR NEW IPHONE NEEDS A NEW CASE
Obviously a Q&D copy/paste from their iPhone blurb.
Too bad there's no other colors.
Slap-Yourself :) said:
Too bad there's no other colors.
Click to expand...
Click to collapse
there is clear and gray I think.
I have a Kay's Case for my GS3 and it's the one I settled on after trying about six others. I'd avoid a clear coloured one though because it looks grubby after a while.
Too bad it doesn't ship to Europe....
anyone got the frosted clear?
Anyone gotten the frosted clear one? I can read on amazon that it's getting good reviews...but I'm curious if it really it soft and if you can see the back's design through the frosted clear. Also, if the words "kay case" is really on it (one review says it is one doesn't). Curious.
I just picked up the smoked one from amazon now just waiting for my nexus 4 seems to be a good case anybody else agree?
WVFAN1 said:
I just picked up the smoked one from amazon now just waiting for my nexus 4 seems to be a good case anybody else agree?
Click to expand...
Click to collapse
I have the black version. It's a decent case. The Diztronic (I have the matte back black one) is a little better. The Diztronic is a little more solid, has a tighter fit, and the the cutouts are a little more precise.
itlnstln said:
I have the black version. It's a decent case. The Diztronic (I have the matte back black one) is a little better. The Diztronic is a little more solid, has a tighter fit, and the the cutouts are a little more precise.
Click to expand...
Click to collapse
I have the Kays case one now but was considering getting the diztronic one too. Maybe I'll just wait for a more heavy duty case to come out
Sent from my Nexus 4 using xda app-developers app
I have a case for my Ipod touch that has 2 parts. You sort of stretch this rubber case over and then a hard plastic fits over that. It really provides amazing drop protection because the rubber absorbs the shock and the plastic absorbs the impact.
For now I have ordered a few really cheap tpu cases but I am hoping for one of these. I will serif I can find the manufacturer of these hard soft cases and I will exit this post. These would really be the way to go if possible.
Sent from my Nexus 4 using xda app-developers app
I received my smoke KayCase a few days ago. It's a nice looking case but trying to press the power button is a nightmare. I've considered using a razor blade or xacto knife to cut the case away from the power button as someone else said they did in the Amazon comments but my craft skills are nearly non-existent. I've written to them using Amazon's feedback mechanism so we'll see what happens.
In the meantime I've ordered the Diztronic and should have it Wednesday.
how slippery is the back of this case? I want a gel case that will not easily slide on a table/flat surface.
I've bought mine from ebay: /itm/400440587924
Pretty cheap xD
Nexus 6P Case - MoKo [Anti Drop] Halo Series Hybrid Cover with TPU + Clear PC Back Panel Bumper Cover for Huawei Google Nexus 6P 5.7 Inch 2015 Smartphone, Crystal Clear
https://www.amazon.com/dp/B00NTQ2NNE/ref=cm_sw_r_other_awd_XhIfwbANZ8S0F
Sent from my SM-N920C using Tapatalk
Thanks!
Sent from my Nexus 5 using Tapatalk
Ordered it just now and came here to post it but you beat me to it. It seems like a great case without the bulk. It gets good reviews on other devices.
Sent from my SM-G530H using Tapatalk
DinarQ8 said:
Nexus 6P Case - MoKo [Anti Drop] Halo Series Hybrid Cover with TPU + Clear PC Back Panel Bumper Cover for Huawei Google Nexus 6P 5.7 Inch 2015 Smartphone, Crystal Clear
https://www.amazon.com/dp/B00NTQ2NNE/ref=cm_sw_r_other_awd_XhIfwbANZ8S0F
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
looks great... but not eligible for prime.
Thanks for the link. Just ordered one!
That's just a standard tpu case that will flood eBay at that price minus shipping soon. It will have rough edges and loose fits on sides. It will yellow and get scratched up within month if not weeks.
Only good for holding you over until better stuff comes.
bombaw8 said:
That's just a standard tpu case that will flood eBay at that price minus shipping soon. It will have rough edges and loose fits on sides. It will yellow and get scratched up within month if not weeks.
Only good for holding you over until better stuff comes.
Click to expand...
Click to collapse
I disagree...Look at the reviews for the same case by the same manufacturer for other devices. It's a decent enough case.
bombaw8 said:
That's just a standard tpu case that will flood eBay at that price minus shipping soon. It will have rough edges and loose fits on sides. It will yellow and get scratched up within month if not weeks.
Only good for holding you over until better stuff comes.
Click to expand...
Click to collapse
the description specifically says that the back is "PC" or polycarbonate. the TPU is probably being used as cushion.
The case is a polycarbonate back and TPU bumper, which is the same design as Spigen ultra hybrid crystal clear. The TPU being flexible makes it much easier to put the case on, while the polycarbonate back makes it more protective against drops.
Sent from my Nexus 5 using Tapatalk
rajendra82 said:
The case is a polycarbonate back and TPU bumper, which is the same design as Spigen neo hybrid crystal clear. The TPU being flexible makes it much easier to put the case on, while the polycarbonate back makes it more protective against drops.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This is the type of case I was looking for.
Just bought one.
toyanucci said:
I disagree...Look at the reviews for the same case by the same manufacturer for other devices. It's a decent enough case.
Click to expand...
Click to collapse
Do a search on eBay "nexus case pc back" for example. You will see what at I meant.
Theses things will flood the market at half the price of that Amazon listing.
Full soft tpu case are sometimes less than a buck a piece.
As I said if you need something to hold you over, sure. But don't expect anything good. And it certainly is not a "good deal".
Given the estimated shipping date it may not even get here before my phone.
I've been here before, believe me it's worth spending a couple of more dollars to be on the safe side.
Btw, is it just me or it just makes the deal look shady when they jack up the shipping like that to hide the true price?
bombaw8 said:
Do a search on eBay "nexus case pc back" for example. You will see what at I meant.
Theses things will flood the market at half the price of that Amazon listing.
Full soft tpu case are sometimes less than a buck a piece.
As I said if you need something to hold you over, sure. But don't expect anything good. And it certainly is not a "good deal".
Given the estimated shipping date it may not even get here before my phone.
I've been here before, believe me it's worth spending a couple of more dollars to be on the safe side.
Btw, is it just me or it just makes the deal look shady when they jack up the shipping like that to hide the true price?
Click to expand...
Click to collapse
Yea, the real cost is hidden in the shipping lol. Re the case though, I just want something thin and light that can still protect from scratches. I had the Spigen Neo hybrid and the other one with the colored back on my note 3 and eventually went caseless because of how much thinner the phone felt without those bulky cases. They look great and do offer a lot of protection but ultimately added too much bulk which is why this current Moko case has attracted me. Not because of the price but because of how little bulk it seems to add in the pics.
Anyhow, if you come across any thin and light cases be sure to post back and let us know, I'm sure I'm not alone in the thin light boat LOL.
toyanucci said:
Yea, the real cost is hidden in the shipping lol. Re the case though, I just want something thin and light that can still protect from scratches. I had the Spigen Neo hybrid and the other one with the colored back on my note 3 and eventually went caseless because of how much thinner the phone felt without those bulky cases. They look great and do offer a lot of protection but ultimately added too much bulk which is why this current Moko case has attracted me. Not because of the price but because of how little bulk it seems to add in the pics.
Anyhow, if you come across any thin and light cases be sure to post back and let us know, I'm sure I'm not alone in the thin light boat LOL.
Click to expand...
Click to collapse
yeah, im in the same boat. went through many cases with my n5. including a couple identical to this one being discussed here. i eventually settled on ringke fusion case after a thinner case failed to protect the screen after i dropped it onto concrete from waist height. not sure if the ringke case would have saved it but i feel the extra few mm added around the edges do provide some protection that the thinner cases do not.
these transparent cases look very thin in renders but i can almost guarantee you they are no thinner than any full soft tpu case. these things provide mostly what i would call scratch protection rather than drop protection. my biggest problem however is most of these cases are cheaply made in high volumes from the same factories. most of them will turn yellow quickly and the stiff clear back will get scratched up easily. if you are really lucky, you end up with one that has sharp/rough edge that keeps messing up your screen protector, glass or film.
i have tried everything from backless bumpers (pointless) to amour cases (ugly and bulky). for now i will probably stay with Ringke fusion or one of the several others just like it, at least i know what i will be getting and these companies do have decent customer service to take care of manufacturing or design problems free of charge.
bombaw8 said:
yeah, im in the same boat. went through many cases with my n5. including a couple identical to this one being discussed here. i eventually settled on ringke fusion case after a thinner case failed to protect the screen after i dropped it onto concrete from waist height. not sure if the ringke case would have saved it but i feel the extra few mm added around the edges do provide some protection that the thinner cases do not.
these transparent cases look very thin in renders but i can almost guarantee you they are no thinner than any full soft tpu case. these things provide mostly what i would call scratch protection rather than drop protection. my biggest problem however is most of these cases are cheaply made in high volumes from the same factories. most of them will turn yellow quickly and the stiff clear back will get scratched up easily. if you are really lucky, you end up with one that has sharp/rough edge that keeps messing up your screen protector, glass or film.
i have tried everything from backless bumpers (pointless) to amour cases (ugly and bulky). for now i will probably stay with Ringke fusion or one of the several others just like it, at least i know what i will be getting and these companies do have decent customer service to take care of manufacturing or design problems free of charge.
Click to expand...
Click to collapse
Looked up the Ringke FUSION and it looks great. I see they are having issues re their confirmation of the 6P ship dates but I looked up a review of the Ringke FUSION on the Note 5 and it's great, it's along the lines of what I have in mind, it looks to add very little bulk! Hopefully they get it out soon enough so they can capitalize on the initial surge of sales of 6P accessories.
thanks! Just ordered one myself.
:Canceled my order:
I hate scammy pricing like this. Its basically $5 with free shipping you can't return or get refund if/when its crap.
grabbed one also, thanks OP!
Trueglich said:
I hate scammy pricing like this. Its basically $5 with free shipping you can't return or get refund if/when its crap.
Click to expand...
Click to collapse
This.
Seriously, think about it folks.
Elnrik said:
This.
Seriously, think about it folks.
Click to expand...
Click to collapse
It's a good warning for sure, but it's still $4.99 total for a case that - judging from the company's other products and their reviews - is most likely fine. That's an acceptable risk for me.
If I've learned anything from past experience its that I will settle with the Supcase unicorn beetle case because its awesome. I'll still purchase about a dozen cases, but chances are very likely that I will settle with that one.
I was looking for other cases for the Essential phone and came across the incipio.com website. they are currently listing two different cases. The Dualpro is a case I had not seen before it is a Dual Layer Protective case and available in three different colors.
bng0 said:
I was looking for other cases for the Essential phone and came across the incipio.com website. they are currently listing two different cases. The Dualpro is a case I had not seen before it is a Dual Layer Protective case and available in three different colors.
Click to expand...
Click to collapse
Yeah its been out for awhile.. but 29.99 is a bit steep.. waiting for it to hit amazon..
Sent from my PH-1 using Tapatalk
Here's a new one I found on eBay: Look at this on eBay
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/253259502286
jaime3344 said:
Here's a new one I found on eBay: Look at this on eBay
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/253259502286
Click to expand...
Click to collapse
Thats nice looking.. almost factory look on the back
Sent from my PH-1 using Tapatalk
I have the black DualPro case on the way from Cases.com. Incipio was out of stock.
I agree it is steep but this phone is so slick and the case looks solid.
I have the Tudia Tamm coming from Amazon $12.90 they have it in 3 different colors. It’s available on eBay also.
Sent from my iPhone using Tapatalk
Nick N said:
I have the black DualPro case on the way from Cases.com. Incipio was out of stock.
I agree it is steep but this phone is so slick and the case looks solid.
Click to expand...
Click to collapse
Please post pics and review When you get it.
I have the tudia case from Amazon and I'm looking for a better case. It is very thing and really lose on the sides. I'm want the incepio case but they don't have it in Amazon right now. Also the tudia case peels up my wet install screen protector, but I'm thinking any case will sure to the super slim bezels.
Here is the link to Incpio
https://www.incipio.com/cases/smartphone-cases/essential-cases-covers.html
oldman_58 said:
Here is the link to Incpio
https://www.incipio.com/cases/smartphone-cases/essential-cases-covers.html
Click to expand...
Click to collapse
I just bought the dualpro from case.com...they have 10 percent off with code CASES
Mine says it will be here Friday, the wait is killing me. I have been handling this thing with kid gloves, leaving it in my pocket more than usual.
I plan on posting pics and providing my opinion of it. Unfortunately I do not use a screen protector, so I won't be able to speak on compatibility with one. I am going to put the round flat magnet from my vent phone holder (the round one with rubber feet) in between the two layers. I have had success with other cases and if it can confidently hold my Moto X Pure in place the Essential should not be an issue.
It seems like the case (DualPro) gets mostly favorable reviews in Amazon, I noticed that the Pixel price is around $10, where the Pixel 2 is still $29 (on Amazon). I am assuming that over time this case will get cheaper.
I have a similar case on my iPhone 6s made by iLuvvitt and it is rock solid and cost me less than $4 on sale.
Anyone else eyeing the Tudia Glost case that is being released on December 8th? I may pick up the Ocean Green one. It will be $19.90 on Amazon, $16.91 with 15% off coupon code on the page.
Nick N said:
Mine says it will be here Friday, the wait is killing me. I have been handling this thing with kid gloves, leaving it in my pocket more than usual.
I plan on posting pics and providing my opinion of it. Unfortunately I do not use a screen protector, so I won't be able to speak on compatibility with one. I am going to put the round flat magnet from my vent phone holder (the round one with rubber feet) in between the two layers. I have had success with other cases and if it can confidently hold my Moto X Pure in place the Essential should not be an issue.
It seems like the case (DualPro) gets mostly favorable reviews in Amazon, I noticed that the Pixel price is around $10, where the Pixel 2 is still $29 (on Amazon). I am assuming that over time this case will get cheaper.
I have a similar case on my iPhone 6s made by iLuvvitt and it is rock solid and cost me less than $4 on sale.
Anyone else eyeing the Tudia Glost case that is being released on December 8th? I may pick up the Ocean Green one. It will be $19.90 on Amazon, $16.91 with 15% off coupon code on the page.
Click to expand...
Click to collapse
Im thinking that case companies are waiting to see if the phone is successful or not. With only 5k phones reported sold right off the start, Im sure case companies do not want to put time and money into an unsuccessful product. Now that you can get the phone from sprint for about 150 bucks im sure the sales and need for cases has gone way up. It seems that all the cases are back ordered.
My case is still not here, USPS says it was delayed. Hopefully it will be here today or Monday. Looks like everyone is out of stock, so at least I have one coming. Hindsight I should have ordered a backup (like the TAMM) on Amazon as soon as I ordered the phone. Live and learn.
Ordered mine from Incipio yesterday.. Got 50 % off and free shipping..
Sent from my PH-1 using Tapatalk
Grrr...out of stock on Incipio's site now
I was thinking of getting one and removing the back to have a bumper only (not sure why nobody has made a bumper case yet) currently have their regular one coming in a few days but I hate the look.
Like you I've been going naked for almost a week and handling it like a small child lol
Finally got my case! Feels premium for sure, but so does my $4 iLuvvitt dual layer case on my iPhone 6s.
Seriously though, it is a nice case. I feel like the inside TPU layer could be carried separately if desired. No issues using the round magnet that came with my vent phone mount between the layers. The rubbery finish on the outside layer shows oils from your hands when you handle it, but every case I have had like this is the same and can be wiped off easily with a microfiber towel.
It definitely adds bulk to the phone, but if you buy a dual layer case you should expect that. Rubber covering the buttons require a little bit of effort to press, cutouts are precise, and the OEM charger plugs in no problem. Having a raised case on the phone helps locate the fingerprint sensor easily.
I recommend it and would buy it again. I can't figure out how to post pics, Tapatalk won't allow me to attach anything.
Did you give the app permission?
Nick N said:
Finally got my case! Feels premium for sure, but so does my $4 iLuvvitt dual layer case on my iPhone 6s.
Seriously though, it is a nice case. I feel like the inside TPU layer could be carried separately if desired. No issues using the round magnet that came with my vent phone mount between the layers. The rubbery finish on the outside layer shows oils from your hands when you handle it, but every case I have had like this is the same and can be wiped off easily with a microfiber towel.
It definitely adds bulk to the phone, but if you buy a dual layer case you should expect that. Rubber covering the buttons require a little bit of effort to press, cutouts are precise, and the OEM charger plugs in no problem. Having a raised case on the phone helps locate the fingerprint sensor easily.
I recommend it and would buy it again. I can't figure out how to post pics, Tapatalk won't allow me to attach anything.
Click to expand...
Click to collapse
Deleted. Still no luck.
Just got mine in.. except I accidentally doubled ordered..grrrr
Sent from my PH-1 using Tapatalk