HTC Sensation refuses to flash any ROM - HTC Sensation

Okay, so I tried to install CyanogenMod 9 RC2 on my Sensation T-Mobile via CWM. I tried to install it via SD card but whenever I try installing it, it always responds with something like "e: can't open file.zip (bad) install aborted". It can't be a bad zip file, because I tried redownloading the same file from multiple sources, as well as other ROMs, like MIUI, but none of the ROMs flash. The only ROM that it does flash is BADOSP 1.1, which I'm using right now. I've also tried several different recoveries, like 4EXT, CWM 4.0.1.4, CWM 5, and CWM 5 Touch. Any help will be greatly appreciated.

Are you still S-on? Before you get down to Rom flashing make sure you've done all the primary stuffs. SuperCID, s-off, update firmware, etc to minimize any issues. Update your recovery to the latest 4ext touch version. (Use 4ext updater app it does it for you) Compare md5 values before you flash a ROM. Emmm.... That's pretty much all I can think of. I flash all my Roms with 4ext touch. See if it works out for you Idk if you tried any or all of the above. just trying to help

Nope, I'm S-OFF using Juntobear and I think I figured out the problem. The SD card was broken and every zip that I put into it turned out to extract cpgz files, so i just got a new SD card and reformatted it and it works now. Thanks though!

Related

[Q] clockworkmod not installing rom to evo

i flashed my evo using the latest unrevoked and clockword mod for the evo. ive tried flashing three different roms and i always get installation aborted right after it says installation initalizing. i made sure the i copied the zips to the sd card root. and re done the proccess multipule time with each rom and keep getting the same out come. does anyone no what the issue could be and how to fix it.
jprobranded said:
i flashed my evo using the latest unrevoked and clockword mod for the evo. ive tried flashing three different roms and i always get installation aborted right after it says installation initalizing. i made sure the i copied the zips to the sd card root. and re done the proccess multipule time with each rom and keep getting the same out come. does anyone no what the issue could be and how to fix it.
Click to expand...
Click to collapse
Maybe you should try formatting the sdcard and wipe everything when you go to flash a rom. Make sure the rom is compatible.
i dont think that formating is the issue. cause ive loaded other zip files thru clock work off this sd card. it just wont load roms and boot images. when u say make sure its compatible are u talking about clock work. cause all these romes are meant for the evo.
jprobranded said:
i dont think that formating is the issue. cause ive loaded other zip files thru clock work off this sd card. it just wont load roms and boot images. when u say make sure its compatible are u talking about clock work. cause all these romes are meant for the evo.
Click to expand...
Click to collapse
Maybe your rom files are corrupted so you cant flash them, try re-Dl'ing the roms again.
okay i did that and i get abort error 6 what does that error code mean

Can't install any custom roms any longer

I am lost.
I had FireFly 2.05 on my SGS (ATT US version) and was going to update to 2.1. I followed the procedure as I aways do; ODIN 1 click to stock rom, master clear, copy update.zip and rom file and reboot into recovery. This time however I get the following error
E:Can't symlink /system/xbin/su SYSTEM:bin/su
E:Failure at line 14
I checked some notes on this and found out that it might be a currupt file. So I re-downloaded FireFly2.1 again and transfered the file to the internal SD card. The outcome was the same.
Then I copied the original 2.05 version back which I know was fine and I still get the same error. Even after a full stock 1-click and master clear the above error will not go away.
Is my internal SD card messed up? Or am I missing something else?
It's running stock right now and all seems to work fine, but I cannot stand all the bloatware and other crap ATT puts on the phone and really want to try FireFly2.1.
Any help is greatly appreciated.
Thanks.
Did you flash clockwork recovery
Did you root the phone after you flashed back to stock?
Sent from my SAMSUNG-SGH-I897 using XDA App
Agree with DaveyBB - sounds like you are not rooted.
Sent from my SAMSUNG-SGH-I897 using XDA App
You do not need to root on stock just flash clockwork with update zip
The update.zip i use is the current clockwork recovery.
I boot into the stock e2 recovery, then apply cw recovery and update the rom. Never had to root stock before when i update via cw recovery.
I will try to root stock first this time and then apply rom via recovery.
Thx
Sent from my SAMSUNG-SGH-I897 using XDA App
anosis said:
The update.zip i use is the current clockwork recovery.
I boot into the stock e2 recovery, then apply cw recovery and update the rom. Never had to root stock before when i update via cw recovery.
I will try to root stock first this time and then apply rom via recovery.
Thx
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
To install clockwork select reinstall packages twice
The issue is not with cw recovery. I am already in it, but the error that i get is after i click "yes apply this zip"... The script starts to format the system, data, datadata, etc. And then this error shows up after files ate copied
Sent from my SAMSUNG-SGH-I897 using XDA App
Have you tried re download of rom package?
My only guess is that clockwork and the rom are not working well. I would try downloading a different clockwork
Sent from my SAMSUNG-SGH-I897 using XDA App
mcord11758 said:
Have you tried re download of rom package?
Click to expand...
Click to collapse
Done that too.
So just to reiterate...
I had FireFly2.05 running and many other cooked Android 2.1 and 2.2 roms before this. I follow the instrution of the cooks to the 't' on how to update to the newest rom and never had any issue.
This time I downloaded FireFly2.1 and also Phoenix4.5 from the respective cooks and followed the instructions as usual. The issues does not show up until the 'copy files' part of the script is running (formating of the filesystem already passed).
All I can imagine are these:
1) The transfer from the PC to the Phone is corrupt (ruled out the download from the net as even the existing FireFly2.05 rom no longer loads)
2) The internal SD card is messes up
3) There is some configuration change I am not aware off that prevents the install of the cooked rom.
Maybe try to reformat sd through clockwork
Problem solved, kind of.
My desktop PC, which I always use to transfer the files is somehow responsible for the error I get in CWM recovery. I ended up using my laptop to transfer the ROM to the phone and it worked again.
Something is messing up the USB transfer? That seems very odd but I am glad it's not the phone that caused the issue.
If I find out what the issue is with my Desktop I will post again just in case this rather rare issue might happen to someone else.
anosis said:
Done that too.
So just to reiterate...
I had FireFly2.05 running and many other cooked Android 2.1 and 2.2 roms before this. I follow the instrution of the cooks to the 't' on how to update to the newest rom and never had any issue.
This time I downloaded FireFly2.1 and also Phoenix4.5 from the respective cooks and followed the instructions as usual. The issues does not show up until the 'copy files' part of the script is running (formating of the filesystem already passed).
All I can imagine are these:
1) The transfer from the PC to the Phone is corrupt (ruled out the download from the net as even the existing FireFly2.05 rom no longer loads)
2) The internal SD card is messes up
3) There is some configuration change I am not aware off that prevents the install of the cooked rom.
Click to expand...
Click to collapse
One Question:
What method are you using to enter recovery method when you attempt to flash the rom? And what color is your recovery menu (should be green)?
(Don't go into recovery via rom manager. Try entering recovery via your advanced power menu)
bames said:
One Question:
What method are you using to enter recovery method when you attempt to flash the rom? And what color is your recovery menu (should be green)?
(Don't go into recovery via rom manager. Try entering recovery via your advanced power menu)
Click to expand...
Click to collapse
I don't think he's getting into Clockwork via ROM Manager, as he's said multiple times he's using the CWM update.zip; reinstalling packages in 2e recovery to get to CWM.
He's also said he doesn't believe this to be an issue with Clockwork (and I don't either). And I'm also pretty sure we're not dealing with newbie mistakes of Android Recovery vs. Clockwork Recovery.
any chance you're leaving your usb plugged into your cappy while you're trying to flash it?

Flashing new rom

My buddy has the inspire 4g. He bought it rooted by somebody else. I've flashed cynogenmod for him aqnd several updates over the past few months. We are trying to flash new roms and its constantly aborting. Ive rooted my droids and always flash roms and never run into this problem.
He has the newest clockwork mod should we possible get a different recovery?
I don't do anything with flashing a new radio, is that necesary and whats causing the problem?
I am trying to flash core droid or revolution, he wants the best sense rom any suggestions?
I would appreciate any help. If there is no way to fix it I planned to totally reset and unroot and then root it myself and make sure everything is done right, does that sound right?
dieseldank said:
If there is no way to fix it I planned to totally reset and unroot and then root it myself and make sure everything is done right, does that sound right?
Click to expand...
Click to collapse
Though probably not necessary, the peace of mind that comes with knowing what's been done to the phone from the ground up might be worth it.
As for a fix to your current issue, please provide a little more detail as to the error.
It clears the cache and everything like that but it has a line that says installing update then the next line is installation aborted. That happens very quickly when I try to apply the update.zip
dieseldank said:
It clears the cache and everything like that but it has a line that says installing update then the next line is installation aborted. That happens very quickly when I try to apply the update.zip
Click to expand...
Click to collapse
Is this the same SD card for every try? It might be a flakey SD card. Try a different card if you can.
I have several sd cards so will try the one I use. Am going over to help him in a few hours. Anyone have other suggestions? Should I be able to just flash a rom or do I have to flash a new radio also? <Because Ive only done cynogen on his which didnt have a radio.
Thanks again.
dieseldank said:
I have several sd cards so will try the one I use. Am going over to help him in a few hours. Anyone have other suggestions? Should I be able to just flash a rom or do I have to flash a new radio also? <Because Ive only done cynogen on his which didnt have a radio.
Thanks again.
Click to expand...
Click to collapse
Radio is not usually flashed as part of the ROM. As long as you have a valid radio, it should work. If you somehow managed to get an invalid radio flashed, then you've have bigger problems that you indicate (i.e. hard bricked).
The fact that you can boot into recovery indicates that all it well with the device from that perspective. That leaves only the ROM zip to be flashed which is why I suggested trying a different SD card (since you tried several, it's not likely that you always got a bad download).
If it still messes up with a new SD card, try complete wipe, then format system from nandroid before running the update.zip. System partition doesn't get formatted during a complete wipe, but most ROMs should format it as a matter of course before installing. It's unlikely, but it could be a corrupt system partition which should clean up with a format.
dieseldank said:
I have several sd cards so will try the one I use. Am going over to help him in a few hours. Anyone have other suggestions? Should I be able to just flash a rom or do I have to flash a new radio also? <Because Ive only done cynogen on his which didnt have a radio.
Thanks again.
Click to expand...
Click to collapse
Wanna Save yourself some time and maybe some future headaches? Like posted above It helps when you know what has been done. I would start from the ground up. Get back to a stock base and go from there, this way you are not trying to track down something you may not have done but was done before he got it.
As for your issue, If a radio is recommended then it will/should state so in the thread.
I have threads on how to root his inspire but can anyone forward a link of how to completely unroot and reset. When i reset in recovery it still keeps cynogenmod on.
dieseldank said:
I have threads on how to root his inspire but can anyone forward a link of how to completely unroot and reset. When i reset in recovery it still keeps cynogenmod on.
Click to expand...
Click to collapse
There's no good reason to go through all that trouble. If you have S-OFF, then you're good to go as far as being rooted is concerned. Since you appear to have recovery too, then you're 95% rooted no matter what the current ROM is doing.
If you have S-OFF already, then going back to stock and rerooting is just going to waste time.
dieseldank said:
It clears the cache and everything like that but it has a line that says installing update then the next line is installation aborted. That happens very quickly when I try to apply the update.zip
Click to expand...
Click to collapse
In cwm are you trying to "apply update from sdcard" or "install zip from sdcard"
install zip is what you want.... then choose the ROM. IF you're applying update.... it's gonna abort.
You could also try reflashing recovery in Rom Manager or flashing an older version of recovery.
Sent from my time waster.
Gene Poole said:
There's no good reason to go through all that trouble. If you have S-OFF, then you're good to go as far as being rooted is concerned. Since you appear to have recovery too, then you're 95% rooted no matter what the current ROM is doing.
If you have S-OFF already, then going back to stock and rerooting is just going to waste time.
Click to expand...
Click to collapse
Since it has s-off and is rooted correctly what do you advise I do to fix my abort problem? Didn't see an answer in there, thanks.
Nickovtyme said:
In cwm are you trying to "apply update from sdcard" or "install zip from sdcard"
install zip is what you want.... then choose the ROM. IF you're applying update.... it's gonna abort.
You could also try reflashing recovery in Rom Manager or flashing an older version of recovery.
Sent from my time waster.
Click to expand...
Click to collapse
I tried both ways and its aborts both ways. And Ive reflashed recovery in rom manager, should I maybe try a different recovery?
Since you are already rooted and having trouble flashing thru rom manager, why not try flashing to stock rooted thru bootloader? It's my understanding that attn1's Ace_Cingular_US rom will automatically do a full wipe and take you to the latest stock rom and radio. If that works, then you can install the latest rom manager and flash a custom rom. It's worth a shot.
Sent from my Desire HD using Tapatalk
dieseldank said:
Since it has s-off and is rooted correctly what do you advise I do to fix my abort problem? Didn't see an answer in there, thanks.
I tried both ways and its aborts both ways. And Ive reflashed recovery in rom manager, should I maybe try a different recovery?
Click to expand...
Click to collapse
It's not gonna hurt. it sounds like the recovery is having issues with the script so it's aborting... an older recovery may resolve that issue.
But that's a good idea also... flash the lastest stock rooted ROM thru hboot. Then reflash recovery. see If that don't solve it
Sent from my time waster.

[Q] SD card appears as only 48MB. how come?

Hi, seems like my One S's sdcard partition has corrupted. been using TWRP 2.500 and recently upadted to 2.6.30 to use the new Maximus Rom. During the rom installation, I wiped the sdcard sectrion by mistake so I couldn't get to flash the zip file, then, I've tried multiple times of recovery.img flashings via RUU mode or on the bootloader screen. Finally when I got the TWRP recovery mode again, it says the sdcard folder only accepts 48 MB so I cannot push any custom roms since they are bigger than 500MB... Any ideas? Should I send it to the repair shops? Please Help!! Thank you!
FYI, my phone was
Tampered, Unlocked, S-off
also, when I press mount button on TWRP, this list appears
Cache
Data
Internal SDcard
System
USB-OTG
but I select Internal SD, the computer says the removable disk has only 48MB of available space.(I wiped it multiple times!)
puwa said:
Hi, seems like my One S's sdcard partition has corrupted. been using TWRP 2.500 and recently upadted to 2.6.30 to use the new Maximus Rom. During the rom installation, I wiped the sdcard sectrion by mistake so I couldn't get to flash the zip file, then, I've tried multiple times of recovery.img flashings via RUU mode or on the bootloader screen. Finally when I got the TWRP recovery mode again, it says the sdcard folder only accepts 48 MB so I cannot push any custom roms since they are bigger than 500MB... Any ideas? Should I send it to the repair shops? Please Help!! Thank you!
FYI, my phone was
Tampered, Unlocked, S-off
also, when I press mount button on TWRP, this list appears
Cache
Data
Internal SDcard
System
USB-OTG
but I select Internal SD, the computer says the removable disk has only 48MB of available space.(I wiped it multiple times!)
Click to expand...
Click to collapse
Omg. Why the people dont read op before they are going to flash new Rom. Just follow the instructions.
Sent from my HTC One S
tominozh said:
Omg. Why the people dont read op before they are going to flash new Rom. Just follow the instructions.
Sent from my HTC One S
Click to expand...
Click to collapse
Could you please tell me at least it's repairable or not? I want your help..
Also, I wonder what part I missed so it happened...hmm
puwa said:
Could you please tell me at least it's repairable or not? I want your help..
Also, I wonder what part I missed so it happened...hmm
Click to expand...
Click to collapse
Yes, don't sweat it. It is repairable.
It's hard for my to tell what you missed, because you didn't write what you did. So just follow installation instructions in the first post of maximus Rom. (flash new firmware, modified recovery, then Rom).
Sent from my HTC One S
tominozh said:
Yes, don't sweat it. It is repairable.
It's hard for my to tell what you missed, because you didn't write what you did. So just follow installation instructions in the first post of maximus Rom. (flash new firmware, modified recovery, then Rom).
Sent from my HTC One S
Click to expand...
Click to collapse
thank you! so, for flashing a new firmware, what would be a good firmware to start? any recommendations? i tried the firmware.zip in the install kit but not worked. same 48MB limit on the /sdcard/. any ideas?
:laugh:
Just follow this. It worked for almost all of us..
http://forum.xda-developers.com/showthread.php?p=45621060
gelo01 said:
Just follow this. It worked for almost all of us..
http://forum.xda-developers.com/showthread.php?p=45621060
Click to expand...
Click to collapse
GRT!! Thanks so much for saving my LIFE!!
gelo01 said:
Just follow this. It worked for almost all of us..
http://forum.xda-developers.com/showthread.php?p=45621060
Click to expand...
Click to collapse
All of these steps work for me except flashing the recovery as a ZIP. I get the wrong CID error (code 42 if i remember correctly). Thing is, I flash the .img directly usign fastboot flash recovery and that works but then the install process says, in android, transfer ROM. At this point, I don't have access to the SD card and the ROM is not in my sd card (it was wiped anyway?)
*EDIT*
Ok I changed my CID to 1111111 and now it works to flash the firmware. I still get partitions errors it seems though.
What I did is flash the stock recovery, clear storage, factory reset, reflashed the firmware given in Maximus thread, then the TWRP given and still, I get problems with my sdcard not mounting?
GabeyC said:
All of these steps work for me except flashing the recovery as a ZIP. I get the wrong CID error (code 42 if i remember correctly). Thing is, I flash the .img directly usign fastboot flash recovery and that works but then the install process says, in android, transfer ROM. At this point, I don't have access to the SD card and the ROM is not in my sd card (it was wiped anyway?)
*EDIT*
Ok I changed my CID to 1111111 and now it works to flash the firmware. I still get partitions errors it seems though.
What I did is flash the stock recovery, clear storage, factory reset, reflashed the firmware given in Maximus thread, then the TWRP given and still, I get problems with my sdcard not mounting?
Click to expand...
Click to collapse
if you are talking about mounting usb storage in recovery, then no, you cannot do that on Maximus HD rom. (it's a modified TWRP to work on the new firmware)
You can sideload in TWRP or ADB push the rom to your sdcard.
I would give you a link to a page describing it, but search is unavailable right now, have to try later.
But just search that thread with keyword sideload. There you will find the exact commands to load the rom onto your sdcard.
tivofool said:
if you are talking about mounting usb storage in recovery, then no, you cannot do that on Maximus HD rom. (it's a modified TWRP to work on the new firmware)
You can sideload in TWRP or ADB push the rom to your sdcard.
I would give you a link to a page describing it, but search is unavailable right now, have to try later.
But just search that thread with keyword sideload. There you will find the exact commands to load the rom onto your sdcard.
Click to expand...
Click to collapse
Yea, that's exactly what I ended up doing... it's not clear on any thread though...
Thanks
I went back to CM, didn't like maximus so much and it didn't fix my EDGE only problem so
It went back to 48mb
Hi i had the same problem with my htc one s.So i paniced and for some reason i put s-on(I deleted the os from the pc using mount storage) I managed to fix it by installing the recovery as zip. Then i tried to adb sideload a rom but it didn't work. So i went to boot loader then to fast boot and did fastboot flash zip Energyrom.zip. That gave me an error so i went back to recovery to try to side load the rom again, but my sdcard went back to 48mb.I reflashed the recovery (the one from install package) same thing . What do i do????? I need help asap i want my phone back (IM ONLY 12) Please reply asap.
cyberusman said:
Hi i had the same problem with my htc one s.So i paniced and for some reason i put s-on(I deleted the os from the pc using mount storage) I managed to fix it by installing the recovery as zip. Then i tried to adb sideload a rom but it didn't work. So i went to boot loader then to fast boot and did fastboot flash zip Energyrom.zip. That gave me an error so i went back to recovery to try to side load the rom again, but my sdcard went back to 48mb.I reflashed the recovery (the one from install package) same thing . What do i do????? I need help asap i want my phone back (IM ONLY 12) Please reply asap.
Click to expand...
Click to collapse
I think the easiest way is to flash the stock recovery and then do a sdcard wipe then a factory reset.
After that, you go through the process as described in the maximus rom thread, you will have to flash with sideload. That should work afterward
I am doomed
Hi guys,
Yesterday I decided to try MaximusROM 10.0.0 HD on my HTC One S, which is s-OFF and with superCID. The problem is: I didn't flashed first the rom as it was said, and I just used the Installation Package, installing directly the firmware.zip and the modified recovery. I tried to follow the steps written before, but now my phone works with the stock rom but it says that there are only 48mb in sd card, and that means that I can't even take photos, because I have no memory left. I found out that my phone, when is booted up, in settings says that I have 15,96GB of space for applications. What can I do?
GabeyC said:
I think the easiest way is to flash the stock recovery and then do a sdcard wipe then a factory reset.
After that, you go through the process as described in the maximus rom thread, you will have to flash with sideload. That should work afterward
Click to expand...
Click to collapse
I think I need to to that process my sdcard appears to be 10 gig only. Do you have a link for stock recovery? mine is S4.
48 mb storage = new 3.16 firmware
fix = flash custom 2.6.1 twrp
Sent from my HTC One S using XDA Premium 4 mobile app
lost sd card 48mb
Hi I have big problem with my HTC one s I decided to install maximus hd but I need super cid and s-off facepalm metod everything I do original cid cange to 1111111... Get s-off acses and and install Rom then firmware and when Rom but Rom loads very slowly and sometimes
Black screen and not won't load Rom. And I decided to back s-on and back to original CID HTC_111 and install tricdroid beta 10.0 and then my sdcard 48mb. I try everything flash stock recovery delete all data and wipe but still 48mb try changing a few recovery cmrecovery all types and Twrp recovery but work one prefect Twrp 2.6.1.0 this recovery show me 12gb but I installed Rom on pc 48 I try again flash firmware from maximus hd but failed bicose I change my cid and back to s-on then. I try to go to s-off and change my cid to 11111111.
Noting happen my cid still htc_111 I can't do s-off my hboot is 2.16.0000 I read this forums I find many solutions but no-one don't help my. Try install three roms trickdroid magiobeta and source v14 still 48 I just want get my sd card please somebody. I try many thing relock boot loader try with ruu but still 48
help
dcvc said:
Hi I have big problem with my HTC one s I decided to install maximus hd but I need super cid and s-off facepalm metod everything I do original cid cange to 1111111... Get s-off acses and and install Rom then firmware and when Rom but Rom loads very slowly and sometimes
Black screen and not won't load Rom. And I decided to back s-on and back to original CID HTC_111 and install tricdroid beta 10.0 and then my sdcard 48mb. I try everything flash stock recovery delete all data and wipe but still 48mb try changing a few recovery cmrecovery all types and Twrp recovery but work one prefect Twrp 2.6.1.0 this recovery show me 12gb but I installed Rom on pc 48 I try again flash firmware from maximus hd but failed bicose I change my cid and back to s-on then. I try to go to s-off and change my cid to 11111111.
Noting happen my cid still htc_111 I can't do s-off my hboot is 2.16.0000 I read this forums I find many solutions but no-one don't help my. Try install three roms trickdroid magiobeta and source v14 still 48 I just want get my sd card please somebody. I try many thing relock boot loader try with ruu but still 48
Click to expand...
Click to collapse
Someone may be help me with this trouble :crying::crying::crying::crying::crying::crying::crying::crying::crying:
:crying::crying::crying::crying::crying::crying: Thanks for the help :crying::crying::crying::crying::crying:
same here what should we do i have managed to install magiorom but windows shows only 48mb all i want is to get back to stock but i messed up my cid i am on roger001 but i cannot find a correct rom as i have mi mid pj4010000 please help me get back to stock

Useless HTC Sensation

HI! Today I got an HTC Sensation from a friend and it was laggy due to it's stock rom with preinstalled apps and stuff, so I decided to move to a custom ROM, the first one which caught my eye was 5.0 CM12 from the development section, so I copied it to sdcard.
I have managed to unlock the bootloader through the htcdev site and then flashed the lasted CWM Recovery available, 5.8.0 and then formatted cache, data, system, dalvik, because that's what I've always been doing on my Galaxy S2, it was very straight forward.
But now, I can't install a custom rom, tried that one and the slim pyramid one, even a cyanogenmod rom but still no luck. It would abort the installation and output an error about filesystems which can't be found or it woudn't say nothing but will restart the phone straight to recovery mode.
Also, tried 4ext recovery and still no luck. At this point I started panicking and tried to resolve this by installing the stock rom, RUU.
Downloaded RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed , which is the perfect match for my phone but also fails to finish installation, telling me something about failed/unknown mounts/filesystem... If it will help, I will tell you exactly what the error is.
At this moment I have S-On in bootloader, and can't see any radio serial metioned at the top. Tried some instructions flashing PG58IMG.zip , but it doesn't seem to do anything.
Please, help me out because at this point my phone won't go anywhere but bootloader and recovery.
AKAndrew41 said:
HI! Today I got an HTC Sensation from a friend and it was laggy due to it's stock rom with preinstalled apps and stuff, so I decided to move to a custom ROM, the first one which caught my eye was 5.0 CM12 from the development section, so I copied it to sdcard.
I have managed to unlock the bootloader through the htcdev site and then flashed the lasted CWM Recovery available, 5.8.0 and then formatted cache, data, system, dalvik, because that's what I've always been doing on my Galaxy S2, it was very straight forward.
But now, I can't install a custom rom, tried that one and the slim pyramid one, even a cyanogenmod rom but still no luck. It would abort the installation and output an error about filesystems which can't be found or it woudn't say nothing but will restart the phone straight to recovery mode.
Also, tried 4ext recovery and still no luck. At this point I started panicking and tried to resolve this by installing the stock rom, RUU.
Downloaded RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed , which is the perfect match for my phone but also fails to finish installation, telling me something about failed/unknown mounts/filesystem... If it will help, I will tell you exactly what the error is.
At this moment I have S-On in bootloader, and can't see any radio serial metioned at the top. Tried some instructions flashing PG58IMG.zip , but it doesn't seem to do anything.
Please, help me out because at this point my phone won't go anywhere but bootloader and recovery.
Click to expand...
Click to collapse
install latest 4ext from here
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from 4ext format all partitions except sdcard
enable smartflash( because you are on S-ON)
flash the custom rom
note: enable smartflash exactly before flashing the rom
Thank you very much! I've managed to install SKimKAT now. But how can I get S-Off permanent? Also, I can't install the stock RUU firmware.
RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed
It freezes on the "sending" stage for hours.
AKAndrew41 said:
Thank you very much! I've managed to install SKimKAT now. But how can I get S-Off permanent? Also, I can't install the stock RUU firmware.
RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed
It freezes on the "sending" stage for hours.
Click to expand...
Click to collapse
see this guide
http://forum.xda-developers.com/showthread.php?t=2751187

Categories

Resources