Related
I bought an Inspire 4G off craigslist and the seller stated the phone wouldn't turn on but I was hoping I could fix it. This is what I discovered:
1) The phone won't turn on, no white boot screen, nothing
2) When I press the power button there is a light that blinks rapidly and it's orange at the top left of the earpiece, not green like I've read online about. Its stops blinking when I let go of the power button.
3) When I have the phone plugged into the wall charger the orange light blinks again constantly, very rapidly.
4) I tried connecting the phone to my computer through USB and it wouldn't recognize it.
Anyone have any idea what might be the problem or what I can do to fix it?
I would leave it on charge for a while then follow brick instructions in sticky, had a bad flash that did that
Sent from my HTC Desire HD using XDA Premium App
How much did you pay for it? Haha and yeah I tottaly agree with ^^^ let it charge for a while.
I've had the same thing happen to me a few times, and all I had to do was pull out the battery and then everything went back to normal.
rboone - how long is a while? I left it charging last night for about 7 hours lol.
ThEiiNoCeNT - I paid $100.
zamula - I pulled the battery out too. I tried everything I could think of. I wanted to try to connect it to my computer to unbrick it but it wouldn't recognize it, I haven't tried ODIN or anything like that, but it didn't recognize it through "My Computer". When you take the battery cover off does the battery just slide out? Mine slides out, it doesn't click in or anything.
crossover37 said:
rboone - how long is a while? I left it charging last night for about 7 hours lol.
ThEiiNoCeNT - I paid $100.
zamula - I pulled the battery out too. I tried everything I could think of. I wanted to try to connect it to my computer to unbrick it but it wouldn't recognize it, I haven't tried ODIN or anything like that, but it didn't recognize it through "My Computer". When you take the battery cover off does the battery just slide out? Mine slides out, it doesn't click in or anything.
Click to expand...
Click to collapse
Can you get it into hboot? And you can't use Odin that's a Samsung firmware for Samsung phones. You will need to get the ruu
Sent from my Inspire 4G using XDA Premium App
trell959 said:
Can you get it into hboot? And you can't use Odin that's a Samsung firmware for Samsung phones. You will need to get the ruu
Sent from my Inspire 4G using XDA Premium App
Click to expand...
Click to collapse
No, the screen won't turn on at all. Oh ok, I thought maybe Odin was only for Samsung. Just download the exe from this thread (link below) and follow the steps? Is there anything specific I should do since my phone won't even boot and I can't get my computer to recognize it?
http://forum.xda-developers.com/showthread.php?t=952224
Have you tried holding the volume down button and pressing the power button?
Racing666 said:
Have you tried holding the volume down button and pressing the power button?
Click to expand...
Click to collapse
Yes. I pressed the volume down button and held it and then pressed the power button. When the power button was pressed the orange light blinked again. It didn't turn on though.
crossover37 said:
Yes. I pressed the volume down button and held it and then pressed the power button. When the power button was pressed the orange light blinked again. It didn't turn on though.
Click to expand...
Click to collapse
Did the person you bought it from offer any kind of hint as to what happened to the phone that caused this condition?
Probably not pre-sale, but now that he has your money, perhaps he'll be more willing to open up about it.
Scott_S said:
Did the person you bought it from offer any kind of hint as to what happened to the phone that caused this condition?
Probably not pre-sale, but now that he has your money, perhaps he'll be more willing to open up about it.
Click to expand...
Click to collapse
Not really, I texted him now to see if he can give me some more info. We'll see what he says.
Something I noticed now is that the orange light doesn't blink when I press the power button without the phone plugged in, it did earlier with the phone plugged in and without it plugged in (just running on battery). Not sure if that's good or bad.
Probably dropped in water. Its toast most likely.
Sent from my Desire HD using XDA Premium App
quangxha said:
Probably dropped in water. Its toast most likely.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Yea, I just checked the indicator and it's read. Water damaged! I tried to find the water damage indicator yesterday when I bought it but couldn't see it.
So...is it too late to try the rice in the bag trick? The orange light flickers...I'm wondering if that means anything positive.
If it is water damaged and you have no chance of turning it on I would throw it in rice anyways...
ThEiiNoCeNT said:
If it is water damaged and you have no chance of turning it on I would throw it in rice anyways...
Click to expand...
Click to collapse
Ok, I'll try it. Take the phone apart and drop the pieces in rice? Put the phone without the battery in it in the bag of rice? or put the phone with the battery in it with the pieces on it as well (battery cover, sim card/sd card cover)?
I heard dropping it in rubbing alcohol helps too...should I avoid this and just try the rice?
crossover37 said:
Not really, I texted him now to see if he can give me some more info. We'll see what he says.
Something I noticed now is that the orange light doesn't blink when I press the power button without the phone plugged in, it did earlier with the phone plugged in and without it plugged in (just running on battery). Not sure if that's good or bad.
Click to expand...
Click to collapse
Well, now that you've mentioned the condition of the water damage indicator, I wouldn't hold my breath waiting for a response from the seller.
Dude's prolly in Canada by now.
Part it out on the bay. Prolly get more then 100 for it.
tweaked said:
Part it out on the bay. Prolly get more then 100 for it.
Click to expand...
Click to collapse
Good idea. If that screen is in working condition, there's all sorts of peeps with shattered screens running around these parts. Or there was, at least.
I don't know how you'd go about testing it out, without a known working secondary inspire laying around willing to be a frankenstein test subject.
Scott_S said:
Good idea. If that screen is in working condition, there's all sorts of peeps with shattered screens running around these parts. Or there was, at least.
I don't know how you'd go about testing it out, without a known working secondary inspire laying around willing to be a frankenstein test subject.
Click to expand...
Click to collapse
Go to bed Scott!!! Oops me too.
henrybravo said:
Go to bed Scott!!! Oops me too.
Click to expand...
Click to collapse
Almost there.
One or two more obnoxious, off-topic, and completely useless posts, and then I'll call it quits for the day.
I JUST BOUGHT A SENSATION FOR MY LADY AND SHE WAS CARRYING IN HER PURSE AND AT THE END OF THE DAY SHE TOOK IT OUT TO USE IT AND SCREEN WOULD NOT TURN ON.. IT POWERS UP, LEDS FLASH, GREEN LIGHT FLASHES TOP CORNER , I PRESS POWER KEY AND LED LIGHTS GO ONE, BUT THE SCREEN NEVER GOES ON,<<<<<< DAMN...
MAYBER REPLACE SCREE??? ANY SUGGESTIONS I WOULD REALLY APPRECIATE IT!!!... THANKS:good:
hi
im not sure but i think your sensation is gone to sleep mode.take off the battery and replace it again.then charge it at least 2 hour.
sry for my bad english...
MandoH said:
I JUST BOUGHT A SENSATION FOR MY LADY AND SHE WAS CARRYING IN HER PURSE AND AT THE END OF THE DAY SHE TOOK IT OUT TO USE IT AND SCREEN WOULD NOT TURN ON.. IT POWERS UP, LEDS FLASH, GREEN LIGHT FLASHES TOP CORNER , I PRESS POWER KEY AND LED LIGHTS GO ONE, BUT THE SCREEN NEVER GOES ON,<<<<<< DAMN...
MAYBER REPLACE SCREE??? ANY SUGGESTIONS I WOULD REALLY APPRECIATE IT!!!... THANKS:good:
Click to expand...
Click to collapse
Hello my dear. Turn off your device and try to push (volume -) + (Power (1 sec)). If you don't see the HBOOT, urgent change the device in that place where you bought it. Np.
Thanks will check it out and see what I can do. Mite have to replace screen. Noticed a red dot that should be white...
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
If the white moisture sensor turned red or pink this is water damage. Is this what you are referring to when you say "red dot should be white"? If so then yes the device got damaged with water or moisture somehow.
Sent from my HTC Sensation 4G using xda premium
realsis said:
If the white moisture sensor turned red or pink this is water damage. Is this what you are referring to when you say "red dot should be white"? If so then yes the device got damaged with water or moisture somehow.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Yes. Under battery. Less go one just not screen. Should I replace screen??? Or is it something else
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Try to remove battery and your sim card, then put it back again. Try to power up your phone, see if vibrates. If you still see black screen than something is wrong with your screen. If your phone doesn't vibrate it can be something else. Try to check if your battery is charged.
MandoH said:
Yes. Under battery. Less go one just not screen. Should I replace screen??? Or is it something else
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
If the indicators show pink or red it is water damage. What exactly the water damaged is hard to say. But if the indicators have turned then that IS likely your issue. You can try taking device apart and placing in a bag of rice to absorb the moisture. Be patient with this it does work but takes some time. Also with device apart carefully dry off parts that are wet with q tips. I dropped my device in the mud. On the outside it looked dry but when I took it apart I could clearly see the water still present in the device. This worked for me however I did not luckily have my indicators turn on me. It all depends on extent of water damage. But give this a try . Best wishes.
Sent from my HTC Sensation 4G using xda premium
Hello, I recently had my HTC One XL cracked screen replaced, it was running fine but now I'm getting a screen that looks like below... What's going on? I doubt it's the ROM but I'm not sure.. It was running fine, bluetooth was working, I was still receiving calls/sms and I could listen to music, and if I slide across where the lock slide is, it vibrates as if I unlocked it like normal and I could turn the screen on/off... However I couldn't turn it off at all, it would just keep turning back on whenever I tried.
Now it's just stuck at that screen after trying to restart it.. I don't think any functions work but I'm not sure as my phone died...charging it right now
I am running Viper ROM 3.1.0.
Thanks!
EDIT: I just turned it on... None of the functions are working, can't even turn the screen off...it's just stuck at that screen until battery dies..
Anybody able to help? Still the same... :\
Can you get into bootloader
tactical kitten said:
Can you get into bootloader
Click to expand...
Click to collapse
Nope, all I see is that screen as soon as I turn the phone on at all
ryennn said:
Nope, all I see is that screen as soon as I turn the phone on at all
Click to expand...
Click to collapse
Hold power button till screen turns off than hold vol down and power than release power and keep holding vol down
tactical kitten said:
Hold power button till screen turns off than hold vol down and power than release power and keep holding vol down
Click to expand...
Click to collapse
I know how to get into bootloader, you asked me if I could
It does not load into bootloader, as soon as I press the power button, that's what I see until the battery dies... If I hold the power button to turn it off, It will turn off for 3 seconds, and reboot on its own until the battery dies!
When it shuts off press and hold the vol - until it turns on. Plug into your pc, press power button one time (like you were selecting "bootloader" option if screen was working) and run fastboot devices from cmd. Chances are, if its powering on at all, you can get to hboot whether you see it on your screen or not.
Sent from my SPH-L710 using Tapatalk 2
18th.abn said:
When it shuts off press and hold the vol - until it turns on. Plug into your pc, press power button one time (like you were selecting "bootloader" option if screen was working) and run fastboot devices from cmd. Chances are, if its powering on at all, you can get to hboot whether you see it on your screen or not.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, for some reason, now that I try to go into bootloader, it won't power on until I let go of both buttons...and in about 5 seconds, it powers on itself with the same screen...nothing happens when I push power, nothing happens when I plug into my pc. The only thing I could do is turn the phone off for 5 seconds before it turns itself back on until the battery dies..
I'm trying to use the HTC One X AIO Kit by Hasoon2000 v2.0 to get it to boot into bootloader or recovery, but it reboots into the same screen.
This is what my CMD says when I click on do command boot into recovery or bootloader:
error: device not found
Use a credit card and pop it out of its shell and check all the connections. This is the 3rd time ive seen this in the one x forums, all had screen replacements. Dont remember the outcome, if any.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 04:40 AM ---------- Previous post was at 04:38 AM ----------
Also the toolkit isnt going to do anything if debugging wasnt enabled, or if it isnt booting all the way into /system. Use cmd and try fastboot devices.
Added: looked them up. Its no doubt hardware related. If under warranty send it in. If not pop it apart and look at ribbon cables and snap connector
Sent from my SPH-L710 using Tapatalk 2
18th.abn said:
Use a credit card and pop it out of its shell and check all the connections. This is the 3rd time ive seen this in the one x forums, all had screen replacements. Dont remember the outcome, if any.
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 04:40 AM ---------- Previous post was at 04:38 AM ----------
Also the toolkit isnt going to do anything if debugging wasnt enabled, or if it isnt booting all the way into /system. Use cmd and try fastboot devices.
Added: looked them up. Its no doubt hardware related. If under warranty send it in. If not pop it apart and look at ribbon cables and snap connector
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, is there a guide or images to help me do this? I doubt it's under warranty because I repaired the screen at a local repair shop. If I pop it out, I don't have any kind of glue or whatever they use to hold the screen back down, and I have no idea what I'm doing, I might mess it up even more
Thanks a lot though, at least I know it's a hardware issue
EDIT: I found a YouTube video on disassembling it. Will I need to disassemble the entire thing?
Here is the video: http://www.youtube.com/watch?v=P8SpHbhzLgU
Dont try and pop the screen off the actual phone is just inside of that nice plastic body. It pops out. Heres a vid I made a while back.
http://db.tt/SEyYD60W
And call the shop who did it and ask wtf......im guessing all these are related to being cheap replacement screens the shops are using.
Sent from my SPH-L710 using Tapatalk 2
18th.abn said:
Dont try and pop the screen off the actual phone is just inside of that nice plastic body. It pops out. Heres a vid I made a while back.
http://db.tt/SEyYD60W
And call the shop who did it and ask wtf......im guessing all these are related to being cheap replacement screens the shops are using.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Yeah the shop was horrible, I had the worse experience..so bad I had to rage and write a review on them...
From your video, I'm not sure which part I'm suppose to pop out... I see a black outside layer around the white plastic boarder of the phone, and on the other side I believe is the actual LCD.. they're both sticking out of the white cover of the phone and I could pop them both out lol, but I'm guessing it's the outside and not the screen.
I'm going to give it a try now, wish me luck :X
Its all one piece, dont pry the screen by itself, it will shatter. Imagine the white/grey plastic as a very nice phone case. All you need to do is get the phone out of its case
Sent from my SPH-L710 using Tapatalk 2
While you have it apart are you good with a volt metor ?? We could usr some voltage read out if you don't mind helping.....
Sent from my HTC One XL using Tapatalk 2
Okay, after a long battle with the LCD and the nice phone case, I finally seperated it..what am I looking at now? everything looks normal to me haha
Look and make sure all ribbon cables are seatedgood in the connectors.
Sent from my SPH-L710 using Tapatalk 2
18th.abn said:
Look and make sure all ribbon cables are seatedgood in the connectors.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
So I took it apart and reseated the cables twice...still the same thing!
Is this the beginning of the end?
If I press hard enough on my phone screen, the screen turns off until the pressure is released.. Any fix that won't cost me money.. Is my phone on the road to the trash can?
I'm actually pretty angry right now...
And it does this with maybe 1-2 pounds of pressure applied to the glass.. and it's never done this before -.-
mirGantrophy said:
Is this the beginning of the end?
If I press hard enough on my phone screen, the screen turns off until the pressure is released.. Any fix that won't cost me money.. Is my phone on the road to the trash can?
I'm actually pretty angry right now...
And it does this with maybe 1-2 pounds of pressure applied to the glass.. and it's never done this before -.-
Click to expand...
Click to collapse
Perhaps applying pressure is loosening the ribbon cable. Ive taken one apart and I find that ribbon cable disconnects rather easily. ofcourse taking the onex apart is a ***** as far as im concerned.
Sent from my Sony Tablet S using xda app-developers app
exad said:
Perhaps applying pressure is loosening the ribbon cable. Ive taken one apart and I find that ribbon cable disconnects rather easily. ofcourse taking the onex apart is a ***** as far as im concerned.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Maybe the cable is loose, but I watched some video where the guy said if the cable isn't plugged in completely the display turns off.
Maybe the pressure is pulling it away until released? I just hope the screen isn't dying for good.
I'm not sending it in to get it repaired, because I can't live with doing "fastboot flash boot boot.img".. If I can fix it myself (for less than $30) I'll be happy.
I'd hate to have my phone die on my now, especially since I started devving :crying:
mirGantrophy said:
Maybe the cable is loose, but I watched some video where the guy said if the cable isn't plugged in completely the display turns off.
Maybe the pressure is pulling it away until released? I just hope the screen isn't dying for good.
I'm not sending it in to get it repaired, because I can't live with doing "fastboot flash boot boot.img".. If I can fix it myself (for less than $30) I'll be happy.
I'd hate to have my phone die on my now, especially since I started devving :crying:
Click to expand...
Click to collapse
Lol I'm sure if anyone knows how to downgrade its you
Sent from my VENOMized HoxL
mirGantrophy said:
Maybe the cable is loose, but I watched some video where the guy said if the cable isn't plugged in completely the display turns off.
Maybe the pressure is pulling it away until released? I just hope the screen isn't dying for good.
I'm not sending it in to get it repaired, because I can't live with doing "fastboot flash boot boot.img".. If I can fix it myself (for less than $30) I'll be happy.
I'd hate to have my phone die on my now, especially since I started devving :crying:
Click to expand...
Click to collapse
Sounds to me like that would be whats happening.. I cant think of anything else that would cause the issue youre having. I wish you luck. If theres anything I can do to help, dont hesitate.
Sent from my Sony Tablet S using xda app-developers app
area51avenger said:
Lol I'm sure if anyone knows how to downgrade its you
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
I don't know.. some people say downgrading 2.14 firmware has bricked/been unsuccessful
exad said:
Sounds to me like that would be whats happening.. I cant think of anything else that would cause the issue youre having. I wish you luck. If theres anything I can do to help, dont hesitate.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Don't mind any talking.. my friend was talking to me on skype.
Anyways, that would make sense, because I *think* the area where my thumb is, is where the ribbon for the screen is?
https://www.dropbox.com/s/9d49rmjn910l8oh/Video Feb 11, 7 43 34 PM.mov
Get Nexus 4
Problem solved
#troll
Sent from my Nexus 4
mirGantrophy said:
Don't mind any talking.. my friend was talking to me on skype.
Anyways, that would make sense, because I *think* the area where my thumb is, is where the ribbon for the screen is?
https://www.dropbox.com/s/9d49rmjn910l8oh/Video Feb 11, 7 43 34 PM.mov
Click to expand...
Click to collapse
The cable comes from the bottom and pops in on the opposite side of where you're pressing. :/
Sent from my One X using xda app-developers app
exad said:
The cable comes from the bottom and pops in on the opposite side of where you're pressing. :/
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
So a loose cable is probably the culprit?
mirGantrophy said:
So a loose cable is probably the culprit?
Click to expand...
Click to collapse
Try putting some pressure on the right edge of the screen.. theres 3 connections there.. 2 that clip in and one that slides in and fastens.. I can't remember which one provides power... hopefully not the one that slips in.
Sent from my One X using xda app-developers app
exad said:
Try putting some pressure on the right edge of the screen.. theres 3 connections there.. 2 that clip in and one that slides in and fastens.. I can't remember which one provides power... hopefully not the one that slips in.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
the right side of the screen doesn't make it turn off. just near the bottom left, and i got scared because my screen didnt come back on after pressing there.. but it did after i turned off the screen *phew*
GREAT NOW MY SCREEN WONT COME BACK ON..
and its back on.. wow this is nerve wracking.. it better be a loose cable
mirGantrophy said:
the right side of the screen doesn't make it turn off. just near the bottom left, and i got scared because my screen didnt come back on after pressing there.. but it did after i turned off the screen *phew*
GREAT NOW MY SCREEN WONT COME BACK ON..
Click to expand...
Click to collapse
Hmmm weird... if you're phone is unlocked, when the screen comes back on is it locked?
Sent from my One X using xda app-developers app
exad said:
Hmmm weird... if you're phone is unlocked, when the screen comes back on is it locked?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
no, stays unlocked
mirGantrophy said:
no, stays unlocked
Click to expand...
Click to collapse
If its the cable.. I believe the one all the way to the right is power. The thick copper looking one. And it slides in.. I'm thinking it may not be cable related... maybe the LCD itself.... you can always try reseating the cable though.
Wait.. no that's exactly where the cable is.. my bad. I think its the cable
Sorry for my confusion. Almost positive the cable is loosening when you press it.
Sent from my One X using xda app-developers app
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
http://db.tt/kheutTWC
That's the back of the phone where the cable plugs in so that's exactly where you're pressing.
Sent from my One X using xda app-developers app
exad said:
If its the cable.. I believe the one all the way to the right is power. The thick copper looking one. And it slides in.. I'm thinking it may not be cable related... maybe the LCD itself.... you can always try reseating the cable though.
Wait.. no that's exactly where the cable is.. my bad. I think its the cable
Sorry for my confusion. Almost positive the cable is loosening when you press it.
Sent from my One X using xda app-developers app
---------- Post added at 09:06 PM ---------- Previous post was at 09:03 PM ----------
http://db.tt/kheutTWC
That's the back of the phone where the cable plugs in so that's exactly where you're pressing.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Well the screen will only stay on if the housing is removed.. works perfectly fine without it.. can press down as hard as I want and the screen works
FML
As far as i know, it is not a good thing,As with the Housing, the housing applies pressure to the phone..that's part of the reason my one x developed screen flex, on the right side...and it is issuing your problem as well. Or it is more likely the cable. Lucky i haven't had this problem yet :victory: . Hmm
WhatTheAndroid? said:
As far as i know, it is not a good thing,As with the Housing, the housing applies pressure to the phone..that's part of the reason my one x developed screen flex, on the right side...and it is issuing your problem as well. Or it is more likely the cable. Lucky i haven't had this problem yet :victory: . Hmm
Click to expand...
Click to collapse
well my phone is trashed, and I already took it apart and unscrewed the screws that say "void".. at least I can get my files off
gonna lock it, RUU it, and throw it in the trash I guess. HTC won't repair it, AT&T can go out of business for all I care.. and I'm not paying $100+ to warranty it..
They aren't getting anymore money out of me
mirGantrophy said:
well my phone is trashed, and I already took it apart and unscrewed the screws that say "void".. at least I can get my files off
gonna lock it, RUU it, and throw it in the trash I guess. HTC won't repair it, AT&T can go out of business for all I care.. and I'm not paying $100+ to warranty it..
They aren't getting anymore money out of me
Click to expand...
Click to collapse
I have the housing from the one x I took apart. You're welcome to it if you want to try a different housing. Its white though dunno if yours is black. Youd just have the pay the shipping which should be pretty cheap.
Sent from my One X using xda app-developers app
exad said:
I have the housing from the one x I took apart. You're welcome to it if you want to try a different housing. Its white though dunno if yours is black. Youd just have the pay the shipping which should be pretty cheap.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
I'm sure XDA members can help piece together a nice FrankenXone for you!
hi guys,weeks ago i dropped my phone and the screen was cracked (the phone was dropped on the screen side hitting the floor),
yes, the phone is still working and everything seems to be fine except the screen, there was dark lines here and there inside the screen.
there is this thing that worries me that the screen might no longer going to work anymore, i dont know, maybe sooner or later because the cracks seems to becoming worst day by day.
attached together is the figure of this phone screen condition.
is there anything i can do to fix the screen?
ahmy said:
hi guys,weeks ago i dropped my phone and the screen was cracked (the phone was dropped on the screen side hitting the floor),
yes, the phone is still working and everything seems to be fine except the screen, there was dark lines here and there inside the screen.
there is this thing that worries me that the screen might no longer going to work anymore, i dont know, maybe sooner or later because the cracks seems to becoming worst day by day.
attached together is the figure of this phone screen condition.
is there anything i can do to fix the screen?
Click to expand...
Click to collapse
Did you try with fridge method? Eject the battery putting the phone in a plastic bag and left it in the fridge for a night. and that try if it healed
If is not ccompletly healed that back to the fridge
Mile_zdr said:
Did you try with fridge method? Eject the battery putting the phone in a plastic bag and left it in the fridge for a night. and that try if it healed
If is not ccompletly healed that back to the fridge
Click to expand...
Click to collapse
seriously? does this trick work? i'll try it,put in the freezer part or the another part?
ahmy said:
seriously? does this trick work? i'll try it,put in the freezer part or the another part?
Click to expand...
Click to collapse
I haven't tried (thanks God ) but very users have confirmed that its working..you can give a try..so eject your battery put the phone in good closed plastic bag for over night that see if haves any improvements
Sent from my HTCSensation using xda app-developers app
Mile_zdr said:
I haven't tried (thanks God ) but very users have confirmed that its working..you can give a try..so eject your battery put the phone in good closed plastic bag for over night that see if haves any improvements
Sent from my HTCSensation using xda app-developers app
Click to expand...
Click to collapse
the freezer part or the normal cold ?
ahmy said:
the freezer part or the normal cold ?
Click to expand...
Click to collapse
Frezer
Sent from my HTCSensation using xda app-developers app
Nice trick :thumbup:
It worked for me long back.
Sent from my HTC Sensation using xda app-developers app