Related
after flashing my galaxy sl i9003 using xxkph it is done smoothly but after restart my mobile it doesn't start normaly it is restarting aain and again and recovery mode doesn't appear how to fix this issue
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
hi brother
i didnt take any backup i am a biginer that do so..
the reason is my first fw is froyo i just updated to xwkpg(2.3.5) via kies and again flashed with odin ie gb ver xxkpq (2.3.6) then try to instal cf root but it is not suite for my fw after restarting nothing appear on my phone ten somebody give me a post to do wit xxkph i try this via odil 3 to 5 times it comes boot screen and do not enter ome screen then someone post me to do with xxkb3 this fw is prograssing download what i do to come my ome screen pls help me bro
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
pls brother kindly give me a solution
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
wiping data/factory reset it shows e:format_volume: rfs format failed on /dev/block/set11o error message
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
hi brother
both download and recovery modes r working but again same problem
Uan_ar said:
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Just download and flash kb3 ,then tells me did phone reboot if yes then I will help further.
I know KB3 WILL solve your problem.
Sent from my GT-I9003 using Tapatalk
Uan_ar said:
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Click to expand...
Click to collapse
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
praveenpravi47 said:
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Click to expand...
Click to collapse
You have to extract the files from the .rar of the KPE (password is samfirmware.com).
praveenpravi47 said:
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
Click to expand...
Click to collapse
i'm sorry but i didn't understand you. Will you please rephrase it? You could flash it ok and also the cf-root? Did you follow all the instructions, step by step? Did you do a factory reset?
If it is not working yet, maybe you could try to flash the kb3, just like manrock111 said. He is much more experienced than i in this kind of things.
file extension problem
i searched for the files and downloaded it butits its extension is .tar.md5 can i use it like that?
Wow my phone is now working :thumbup::thumbup::thumbup::thumbup:
Sent from my GT-I9003 using xda premium
Hi!
I have tried all different kinds of stock firmwares including India, Germany... Odin starts succesfully, finishes, but when it goes to recovery mode it shows data error:
it says that system/csc/TWO/system is missing.. also i can't apply sd card update.. I tried both cache and data reset.. Nothing works
Please help
Hi follow that thread pls.
http://forum.xda-developers.com/showthread.php?p=51886671#post51886671
ahmetakin said:
Hi follow that thread pls.
http://forum.xda-developers.com/showthread.php?p=51886671#post51886671
Click to expand...
Click to collapse
This topic isn't answering anything..
The thing is that i can flash to stock.. i goes well.. but after flashing i'm stuck with bootloop..
I thing i need 4 file rom.. i only found 1 file rom from sammmobile.com
I did it.. I needed to flash it with 4 file firmware
It looks like it was something wrong with csc or something like that
Thanks!
plzzzz tell me the linkkkk.......
where u found the 4 file firmware
i have this error
Sanjay(SUN) said:
plzzzz tell me the linkkkk.......
where u found the 4 file firmware
i have this error
Click to expand...
Click to collapse
you can download firmwares at
sammobile.com .Just create ur
account and then u can download.
sana415 said:
you can download firmwares at
sammobile.com .Just create ur
account and then u can download.
Click to expand...
Click to collapse
Absolutely!!
Hello All,
I want to install lollipop builds on my tab 2 7" (Gt-P3100) now i am on Jb 4.1.1 can i directly flash LP after i root and install philz. or tell me how to do i saw jb 4.2.2 update file but when i download it says site blocked. so please help me how to do in step by step
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button ?
You can flash the latest bootloader from codeworkx dev-host folder, make sure you are in your device folder!
http://d-h.st/users/codeworkx
shsagnik said:
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button
Click to expand...
Click to collapse
i tried download 4.2.2 firmware frm one thread but site blocked can u give me link ?
shsagnik said:
It's better if you download any 4.2.2 firmware from sammobile and flash it through Odin, because it will make sure that you have the latest bootloader, then you can root it, flash custom recovery, and then you can update to lollipop, any doubt or help? Feel free to ask me and make sure you go crazy on the thanks button
Click to expand...
Click to collapse
Hassan 4 said:
You can flash the latest bootloader from codeworkx dev-host folder, make sure you are in your device folder!
http://d-h.st/users/codeworkx
Click to expand...
Click to collapse
u want me to flash this frm that link >> http://d-h.st/Nfz and also tell me how to flash
daringsmart said:
u want me to flash this frm that link >> http://d-h.st/Nfz and also tell me how to flash
Click to expand...
Click to collapse
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
shsagnik said:
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
Click to expand...
Click to collapse
i downloaded 4.2 firmware frm sammobile after flash how do i root it ? and can u send me link of recovery
edit: i could not flash 4.2 firmware :\ pls someone give me a good link
daringsmart said:
i downloaded 4.2 firmware frm sammobile after flash how do i root it ? and can u send me link of recovery
edit: i could not flash 4.2 firmware :\ pls someone give me a good link
Click to expand...
Click to collapse
Try googling the file name
shsagnik said:
Flash it via any recovery like cwm, do a simple flash by wiping cache, dalvik.
Click to expand...
Click to collapse
shsagnik said:
Try googling the file name
Click to expand...
Click to collapse
yes i did but everything same buddy -_- any solution ?
Someone pls help me
daringsmart said:
Someone pls help me
Click to expand...
Click to collapse
Posting the link in 10 mins
_________________________________________________________________________________________________
Here is the link to file you need to flash :-http://www.sammobile.com/firmwares/download/17730/P3100XXDMG6_P3100OXADMG6_XEF/
I am also posting the steps:-
How to Update Galaxy Tab 2 7.0 P3100 to Official JB 4.2.2 XXDMG6 Firmware
Odin can be properly used only if your Galaxy Tab 2 7.0 drivers are being installed on your computer. If the drivers are not there, get them manually or use Samsung KIES.
Download Odin on your computer.
Unzip the file on your PC and install the same.
Also, run Odin on your computer.
Finally, go here and download the Jelly Bean 4.2.2 file.
Place the file on desktop and on the same place unzip the package.
Enter the Tab 2 in download mode.
For download mode first turn off your handset; wait a few seconds and then press on Power, Volume Down and Home buttons at the same time.
Connect your device with the computer via USB cable.
Odin will recognize your tablet and on the program you will see the “added” message displayed and the ID:COM section blue or yellow.
If not, resolve the problems by reinstalling the drivers on the computer.
From Odin click on the option named “PDA”.
Pick the update file from your computer.
The re-partition section and the f. reset time box should be unchecked.
Click on “start”.
The XXDMG6 Firmware will now be installed.
In the end on Odin the ID:COM section will be green and the “pass” message will be displayed.
Then, you will be able to unplug the USB cable; also reboot your device.
shsagnik said:
Posting the link in 10 mins
_________________________________________________________________________________________________
Here is the link to file you need to flash :-http://www.sammobile.com/firmwares/download/17730/P3100XXDMG6_P3100OXADMG6_XEF/
I am also posting the steps:-
How to Update Galaxy Tab 2 7.0 P3100 to Official JB 4.2.2 XXDMG6 Firmware
Odin can be properly used only if your Galaxy Tab 2 7.0 drivers are being installed on your computer. If the drivers are not there, get them manually or use Samsung KIES.
Download Odin on your computer.
Unzip the file on your PC and install the same.
Also, run Odin on your computer.
Finally, go here and download the Jelly Bean 4.2.2 file.
Place the file on desktop and on the same place unzip the package.
Enter the Tab 2 in download mode.
For download mode first turn off your handset; wait a few seconds and then press on Power, Volume Down and Home buttons at the same time.
Connect your device with the computer via USB cable.
Odin will recognize your tablet and on the program you will see the “added” message displayed and the ID:COM section blue or yellow.
If not, resolve the problems by reinstalling the drivers on the computer.
From Odin click on the option named “PDA”.
Pick the update file from your computer.
The re-partition section and the f. reset time box should be unchecked.
Click on “start”.
The XXDMG6 Firmware will now be installed.
In the end on Odin the ID:COM section will be green and the “pass” message will be displayed.
Then, you will be able to unplug the USB cable; also reboot your device.
Click to expand...
Click to collapse
Buddy I downloaded the same file but when I extract it show error
daringsmart said:
Buddy I downloaded the same file but when I extract it show error
Click to expand...
Click to collapse
What's the error message?
Hey author i m using p3100 i want it to safe root with all safe parameters like safe kernel n all??
So help me????
Er. Abhi said:
Hey author i m using p3100 i want it to safe root with all safe parameters like safe kernel n all??
So help me????
Click to expand...
Click to collapse
Tell me what I can do to help you?
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Er. Abhi said:
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
You don't need to update bootloader if you are on 4.1.2 as it has a lollipop compatible boot loader,
You can get the custom recovery file from here, I am posting of my favorite recovery that is TWRP
Just click here :- TWRP
Of course you need a rooted tab for flashing it, you can just download it to your tab and flash it by using Rashr (it's a app available on playstore, just click on it to go to the google play page to download it) or existing recovery, that you most probably don't have.
And tell me anything else you want, but don't forget to press the thanks button
Er. Abhi said:
Give me the link whr i got a custom recovery for p3100 jb 4.1.2
N bootloader also???
Updated
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
shsagnik said:
You don't need to update bootloader if you are on 4.1.2 as it has a lollipop compatible boot loader,
You can get the custom recovery file from here, I am posting of my favorite recovery that is TWRP
Just click here :- TWRP
Of course you need a rooted tab for flashing it, you can just download it to your tab and flash it by using Rashr (it's a app available on playstore, just click on it to go to the google play page to download it) or existing recovery, that you most probably don't have.
And tell me anything else you want, but don't forget to press the thanks button
Click to expand...
Click to collapse
If @Er. Abhi doesn't already have custom recovery installed, he can flash TWRP with Odin or Heimdall. I can confirm the Heimdall will flash the twrp img file.
jrc2
Can u also provide me link frm whr i download firmware for p3100 4.1.2
Official???
Sent from my GT-P3100 using XDA Free mobile app
Er. Abhi said:
Can u also provide me link frm whr i download firmware for p3100 4.1.2
Official???
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
Why you need firmware? Don't you have the 4.1.2 installed?
Can someone help me? Advertisement are always popping up at my notification bar. Then then apps are automatically inatalling like URL RESOLVER, GOOGLE RESOLVER, com.androidhelper.sdk, com.calculatorwindow.sdk, and others. And when i formatted my phone it always restart itself, software is not working and it says that phone is updated in unauthorized way, Mobile Hotspot settings is removed, cannot receive messages unless i perform a restart and Bluetooth is working but the folder where it is located is unknown. What can I do?
Try Flashing STock ROM through Odin bro....... Stock ROM through Odin will solve it ..... Harvey if not solved try any Custom ROM ........... @VECTUS plz move this thread to Q&A Section bro................
VigneshS007 said:
Try Flashing STock ROM through Odin bro....... Stock ROM through Odin will solve it ..... Harvey if not solved try any Custom ROM ........... @VECTUS plz move this thread to Q&A Section bro................
Click to expand...
Click to collapse
How can I flash thru android? Do I have to download any files?
Harvey9050 said:
How can I flash thru android? Do I have to download any files?
Click to expand...
Click to collapse
Follow this video bro...... u need to download nearly 1GB file to flash STock ROM on ur Phone via PC using Odin
Can you give me a link? All I need is the file cause ai already have the Odin.
Harvey9050 said:
Can you give me a link? All I need is the file cause ai already have the Odin.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G7102/ U can download the file from here..... BOB1 is latest KitKat for INDIA
Flame 6 Flash by Fastboot Method....I'm Searching official firmware online there is no available ...
FLame 6 also not pre-installed play store.so i trying root and flash gapps .and then i m factory reset
setup screen cannot finish.. becoz flame 6 not gapps thats the problem... i already backup from flashfire apk
so im here share my backup rom. pure Official with rooted.
steps:
1.extract all files in fastboot folder see attachment like that
2.Goto fastboot mode volume down +power then android logo comes afeter volume up hold +power single press see to reboot bootloader
3.fastboot folder hold shift and right click open cmd here
4.type fastboot devices shows that model
5.then come to fastboot folder double click the flash all.bat file then automatic run flashing to ur mobile wait 10 min
finished type fastboot reboot to phone ..Enjoy dont forget to hit thanks.....:good:
Download Links
https://mega.nz/#!i1wGmZxS!ryR9V2BcbCTniCJMG7qj8VlQfRHc9D0MVgpQvlpy3mo
https://mega.nz/#!nkgmxawJ!qSU0saW-UMGXf-xTL9IaEilHDEL984N6wJc3dq9APZQ
Credits: For Great App
@Chainfire
Which version is it?
The latest build version is LYS_4005_06_11
step Needed
hi. bro please specify the full steps to flash my mobile lyf 4005
Please provide all steps.
Have anyone tried this ... please reply and describe the steps ....in a easy way....
Thanks..☺
I did tried, but doesn't works with fastboot properly, I think its driver problem, please help me bro how to fix it
and thanks for this fastboot flash file. :good:
I want only stock recovery, anyone plz upload it. Flame 6.
Sent from my LS-4005 using Tapatalk
i trayed thios method and it is so easy
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this
it has been successfully flashed in my Flame 6 its very easy. again thank u for this Fastboot file. but the ROM hasn't rooted.
In my way I did root my flame 6 by kingroot and also install Gapps successfully by replacing method
can any one make custom recovery for this mobile
Im stuck ar waiting for device, i think drivers problem how to install drivers plz help
can i unroot after flash this sotck rom ?fast reply
skyrp said:
can i unroot after flash this sotck rom ?fast reply
Click to expand...
Click to collapse
This ROM hasn't rooted ! ,this is fully unrooted ROM you can be root after Flash this ROM
i wil upload a new flshifay bacup
MTK001 said:
it has been successfully flashed in my Flame 6 its very easy. again thank u for this Fastboot file. but the ROM hasn't rooted.
In my way I did root my flame 6 by kingroot and also install Gapps successfully by replacing method
can any one make custom recovery for this mobile
Click to expand...
Click to collapse
in this back up rooted and pre plystore instaled
link wil upload soon....
shabbirsaify said:
in this back up rooted and pre plystore instaled
link wil upload soon....
Click to expand...
Click to collapse
Bro Flashify Doesn't work with this phone because flashify need a custom recovery like CWM/TWRP to perform
I did place the Gapps one by one,
required gapps;
1.'google-framework-services.apk'
2.'google-account-manager.apk'
3.'Google Play Store.apk'
4.'Google Play Services'
Thats All Thank U
I've successfully installed Google Play Store in my flame 6
Watch this Video ;
Click Here
please upload video on youtube and give lin
shabbirsaify said:
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this
Click to expand...
Click to collapse
please help me because my phone is bricked
shabbirsaify said:
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this
Click to expand...
Click to collapse
please upload video
.....
shabbirsaify said:
i trayed this method and it is so easy and thanks bro you don gread job now i upload video for all this steps soon thanck bro agin for this
Click to expand...
Click to collapse
please upload video....
Files for lyf ls-4005
MTK001 said:
Bro Flashify Doesn't work with this phone because flashify need a custom recovery like CWM/TWRP to perform
I did place the Gapps one by one,
required gapps;
1.'google-framework-services.apk'
2.'google-account-manager.apk'
3.'Google Play Store.apk'
4.'Google Play Services'
Thats All Thank U
Click to expand...
Click to collapse
Can you provide the links for these files working with lyf ls-4005
link is not working please help my lyf phone is bricked