My samsung galaxy s3 GT- i9300 will not boot up ,it switches on but does not go past the samsung logo
I was trying to ROOT my device thats were the problem came in
so i have no root, recovery mode does not work NOTHING!!! also tried flashing stock md5.tar using odin which made my device look even worse it says "Firmware upgrade encountered an issue. please select recovery mode in Kies and try again"
HELP ME PLEASE!!!!
5AL3H said:
My samsung galaxy s3 GT- i9300 will not boot up ,it switches on but does not go past the samsung logo
I was trying to ROOT my device thats were the problem came in
so i have no root, recovery mode does not work NOTHING!!! also tried flashing stock md5.tar using odin which made my device look even worse it says "Firmware upgrade encountered an issue. please select recovery mode in Kies and try again"
HELP ME PLEASE!!!!
Click to expand...
Click to collapse
double post and your in the wrong forum...
Related
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
i got a Samsung Note N7000 which is bricked when upgrading to ICS..
now it wont boot and i am getting a message on screen "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
i am able to take it to Download mode....
so i downloaded stock rom of ICS and GB from Xda forum...
now i used Odni and i was try to Recover with ICS and GB stock roms but Odni is saying Failed after some time...
is there any other way to recover.... even Kies is not detecting my note in recovery mode
:crying::crying::crying::crying::crying::crying:
groovybluedog said:
How old is your device bro? And which country do you live in?
Click to expand...
Click to collapse
mine is one year old mobile which i gotit from UK and i live in india....
i am using Odin to flash , when factoryfs.img is gets started to load on mobile odin saying faild
Problem solved
PROBLEM SOLVED
THANKS TO Dr.KETAN because of him this problem for me has been solved
Below is the step-wise description.
WHAT HAPPENED:-
01.) I was on ROOTED GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1
02.) I decided to install Alliance ROM => AllianceROM_JB_N7000XXLSZ-v3 and by mistake and just out of habit instead of using ROM Customizer, I used Mobile ODIN with WIPE (ALL of them) Selected.
03.) Although ODIN didn't came up with any errors and showed installation successful, my phone was stuck on the first screen "SAMSUNG GALAXY NOTE GT-7000" screen.
04.) After waiting for about 30-40 mins. I took out battery, took out memory card and tried to reboot again but no luck.
05.) I tired to recover by re-installing/rolling back to ROM I was on i.e. GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1, but ODIN Shows an error saying "PARAMETER INCORRECT" (screen shot attached)
06.) I then tried to install
GT-N7000 ICS 4.0.4 PDA-DDLR9 CSC(K)-ODDLR3 M-DDLR1 but ODIN failed (Screen Shot Attached)
GT-N7000 GB 2.3.6 PDA-DDLB2 CSC(K)-DDLA1 M-
07.) Now my phone is stuck in two modes only i.e.
7.1.) "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
7.2.) Download MODE
Dr. KETAN"S HELP (WHAT NEEDS TO BE DONE)
01.) Remove .MD5 from extension of ROM and keeping .TAR as extension help me got rid of the "THE PARAMETER IS INCORRECT" error.
02.) Go to Task Manager and close/disable/end process following service
02.1) KIES
02.2)FIREWALL
02.3)ANTI-VIRUS
03.) In ODIN (on PC) Select PDA do not select PHONE (this was my mistake too)
04.) In case you had/have HEIMDALL on your system , go to Device Manager (from Control Panel) and un-install the Generic Device driver
05.) Now try to install the stock ROM you have (it should get installed , at-least this happened in my case.)
WHAT IS TOTALLY USELESS ?
01.) KIES
02.) You PANICKING and FREAKING OUT
WHAT I CAN'T DO:-
01.)Visiting Samsung shop/service station
Please find the attached link to the screen shot. https://plus.google.com/photos/11509...978?banner=pwa
THANKS TO Dr. KETAN again for his HIGHLY appreiciated, respected and well needed help and guidance.
Hello Guys,
This Samsung Galaxy Y Pro Duos B5512 is my new phone and I tried to upgrade the Android to 4.0 ICS but failed and now my phone keeps getting restart after Samsung Start-up Logo. I tried to factory reset but nothing worked not even Kies recognizing it :'( please help me to get my Original Android Back Please...
Is it possible to get Original Android version back?
Thanks
GameZhero said:
Hello Guys,
This Samsung Galaxy Y Pro Duos B5512 is my new phone and I tried to upgrade the Android to 4.0 ICS but failed and now my phone keeps getting restart after Samsung Start-up Logo. I tried to factory reset but nothing worked not even Kies recognizing it :'( please help me to get my Original Android Back Please...
Is it possible to get Original Android version back?
Thanks
Click to expand...
Click to collapse
I never had samsung but i think so you should use odin to flash your phone and will be good.
sonymanw said:
I never had samsung but i think so you should use odin to flash your phone and will be good.
Click to expand...
Click to collapse
Please tell me the procedure to Flash it.
Look here http://forum.xda-developers.com/showthread.php?t=1656825
There are firmware to you device and guide how to flash on post #3
And wideo for gio but i think its this same procedure
http://www.youtube.com/watch?feature=player_embedded&v=3x5EJKY64Vg
And let me know when you're done
Download the firmware odin package for samsung galaxy y pro duos it is available in the forum and follow the instructions to install..next time if u r flashing ur device make sure to have nandroid backup..
Sent from my GT-B5512 using xda app-developers app
sonymanw said:
I never had samsung but i think so you should use odin to flash your phone and will be good.
Click to expand...
Click to collapse
I am having same problem.
Now i am not able to go into recovery mode. Even I tried to flash firmware with odin but unsuccessfull.
Please help
akashkapasi said:
I am having same problem.
Now i am able to go into recovery mode. Even I tried to flash firmware with odin but unsuccessfull.
Please help
Click to expand...
Click to collapse
Correction. Actually I am not able to start recovery mode
I wanted to install custom rom in my samsung B5512. I rooted the phone. flash cwm and wiped the factory data.
then phone rebooted. but then i am not able to go in to recovery mode.
I tried thousand time vol. up key + home + power key, but some how i was not successfull to enter into recovery
mode.
Then even I tried to flash updated firmware with odin, but still not successfull.
I have completed ruined my phone. Now when I start the phone samsung logo appear then again it restart. Nothing
happening.
Please help
Hi,,,I want to ask how to fix my galaxy s2 since it said firmware upgrade encountered an issue,please select recovery mode in kies,,when I was flashing clockwodmode recovery using odin?I went to kies and connect then click the recovery mode,but my device didn't listed...my s2 can't even turn to download mode,,,,using usb jig still cannot force my s2 turn into download mode,,,,,please guys,,reply me tell me what am gonna do??
Hi.My name is Sanny.I am New at this forum...i am having three galaxy s i9003 and he problem with all 3 is the boot loop.1 of them is stuck on the Samsung logo..it restarts at the logo and the other two are stuck on the start-up screen which says the phone model have already try to install the firmware of all but same.the last two phones cannot even go in recovery mode.
I used Odin v 1.83/1.85
with official firmwares v.2.3.5 by samsung (gingerbread.dxkp9)
the firmware is all ok because i have installed the same firmware in my own galaxy s i9003 and it works very fine.
Tech-bit said:
Hi.My name is Sanny.I am New at this forum...i am having three galaxy s i9003 and he problem with all 3 is the boot loop.1 of them is stuck on the Samsung logo..it restarts at the logo and the other two are stuck on the start-up screen which says the phone model have already try to install the firmware of all but same.the last two phones cannot even go in recovery mode.
I used Odin v 1.83/1.85
with official firmwares v.2.3.5 by samsung (gingerbread.dxkp9)
the firmware is all ok because i have installed the same firmware in my own galaxy s i9003 and it works very fine.
Click to expand...
Click to collapse
Hi, If you follow the instructions on this page http://forum.xda-developers.com/showthread.php?t=2594489 I may be able to unbrick your phone for you:good:
Bootloop
Tech-bit said:
Hi.My name is Sanny.I am New at this forum...i am having three galaxy s i9003 and he problem with all 3 is the boot loop.1 of them is stuck on the Samsung logo..it restarts at the logo and the other two are stuck on the start-up screen which says the phone model have already try to install the firmware of all but same.the last two phones cannot even go in recovery mode.
I used Odin v 1.83/1.85
with official firmwares v.2.3.5 by samsung (gingerbread.dxkp9)
the firmware is all ok because i have installed the same firmware in my own galaxy s i9003 and it works very fine.
Click to expand...
Click to collapse
While you wait for senior xda members to respond..head over to youtube...very good tutorials on how to resolve bootloops/UnBrick
Hello everyone! I Own a Samsung galaxy tab 2 - gt-p3100. I rooted it and installed Cyanogenmod 11. Actually my tab was on Jellybean. Now, I can boot through recovery only. Cannot enter download mode. When I boot my tab, I can see the Samsung logo, then again a samsung logo ( Yeah I see the logo twice). And i cannot turn off my tab So I have to drain the battery everytime. I tried restore through CWM recovery, i never had a backup but somehow i had a recovery file in advanced restore option. So please help me ASAP. I have all the drivers installed, OFFICAL firmware, odin and required tools on my laptop and pc. please help me to recover my tab back. Even if i lose data, it doesn't matter. Please tell me a way to unbrick. i dont know if its a bootloop or a hard brick or a softbrick.
thank you, everything is appriciated !
Hi there, i own a galaxy tab 2 7.0. Do you still need help or not? I flash my tab almost every week
No i fixed it by flashing cm10. But thanks for asking tho.