Flashed to Trickdroid and now just black screen. - HTC One S

Hello,
I dont know if im missing a step but now when I boot up my phone I dont get a anything after the boot animation. Just goes black and I hear the startup sound. What did I do?
Nick

nrm123 said:
Hello,
I dont know if im missing a step but now when I boot up my phone I dont get a anything after the boot animation. Just goes black and I hear the startup sound. What did I do?
Nick
Click to expand...
Click to collapse
Did you flash the boot.img in fastboot? Or use torxxs boot flash script.
Sent from my One S

klin1344 said:
Did you flash the boot.img in fastboot? Or use torxxs boot flash script.
Sent from my One S
Click to expand...
Click to collapse
Thanks for the reply, I did flash it in fastboot. I just figured out how to copy a file over to my phone with the terminal so I am going to start over again. I just had to figure out how to do that.

black screen
Hello,
I Have the same issue and I flash the boot.img with fastboot mode.
I don't know what to do.
Thank you

i've encountered the same issue when flashing custom kernels. try just flashing the rom .zip and boot it up before going back into recovery and flashing the gapps. or try flashing a different kernel in fastboot and see if it comes up

HidaKureku said:
i've encountered the same issue when flashing custom kernels. try just flashing the rom .zip and boot it up before going back into recovery and flashing the gapps. or try flashing a different kernel in fastboot and see if it comes up
Click to expand...
Click to collapse
The problem is I can't reach my SDcard due to an issue with CWM. I saved my former rom. So I tried to restore it but the same problem appeared
Thank you for your help.

which version of CWM are you running? you could try flashing a different version (i had to flash the regular CWM over the touch version because it was giving me issues) or you could try flashing TWRP recovery

HidaKureku said:
which version of CWM are you running? you could try flashing a different version (i had to flash the regular CWM over the touch version because it was giving me issues) or you could try flashing TWRP recovery
Click to expand...
Click to collapse
I will try.
Thank you very much.

Had this several times with Trickdroid. Sometimes you just have to keep trying different combinations of flashing boot.img, clearing cache and running the Aroma installer...take special note of the Aroma messages...I found mine was just skipping right over the ROM install completely for some reason.

Thank you
Thank you for your responses, it was a boot problem.

Related

Problem with viperoneS 2.2.0 rom

hi everyone i have a problem with this rom i do a nandroid backup i buy the flash image gui i flash the boot file boot into recovery i do a full wipe but when i try to instal team venom rom its star and stop in 7.00% and then says reboot or save log i press reboot and the cellphone stay in white screen with red lettlers but now i can restore because the boot.img file its not the same of my backup i hope somebody help me
sorry for my english
MAMBO3000 said:
hi everyone i have a problem with this rom i do a nandroid backup i buy the flash image gui i flash the boot file boot into recovery i do a full wipe but when i try to instal team venom rom its star and stop in 7.00% and then says reboot or save log i press reboot and the cellphone stay in white screen with red lettlers but now i can restore because the boot.img file its not the same of my backup i hope somebody help me
sorry for my english
Click to expand...
Click to collapse
Which recovery are you on?
dwarriors1987 said:
Which recovery are you on?
Click to expand...
Click to collapse
TWRP
MAMBO3000 said:
TWRP
Click to expand...
Click to collapse
Sorry, I'm just now seeing this but if you haven't solved it yet, I would recommend trying out ClockWorkMod Recovery and then flashing...I had the same issue and switching recoveries fixed it.
dwarriors1987 said:
Sorry, I'm just now seeing this but if you haven't solved it yet, I would recommend trying out ClockWorkMod Recovery and then flashing...I had the same issue and switching recoveries fixed it.
Click to expand...
Click to collapse
thanx for your answer i already fix it but thanx for your help but now my problem is i want to change rom but i cant i want to flash illusion rom but when i try to flash dont even start just stop i think its because the kernel but i dont know how to update kernel
Yeah it probably is the kernel, you have to update the hboot...here's a guide for it. http://forum.xda-developers.com/showthread.php?t=2322755

[Q] stuck in viper xl boot animation

I got a phone call and phone rebooted but got stuck in boot animation. I can get into recovery. please help/:crying:
pjcanales said:
I got a phone call and phone rebooted but got stuck in boot animation. I can get into recovery. please help/:crying:
Click to expand...
Click to collapse
If you can get into recovery, you can try reflashing the boot.img or reflashing the rom.
exad said:
If you can get into recovery, you can try reflashing the boot.img or reflashing the rom.
Click to expand...
Click to collapse
no need to flash boot image im on hboot 1.09 and I tried to reflash the rom and still get stuck.
never mind I did a clean install of rom instead of dirtyflash and it went thru. have to download the apps again but at least its working now. thanks again.
pjcanales said:
no need to flash boot image im on hboot 1.09 and I tried to reflash the rom and still get stuck.
never mind I did a clean install of rom instead of dirtyflash and it went thru. have to download the apps again but at least its working now. thanks again.
Click to expand...
Click to collapse
np

Repair Splash screen

i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks
DutchGlory said:
i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks
Click to expand...
Click to collapse
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............
RE: Repair Splash screen GT-N8000
kkretch said:
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............
Click to expand...
Click to collapse
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...
The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .
JJEgan said:
The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .
Click to expand...
Click to collapse
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...
DutchGlory said:
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...
Click to expand...
Click to collapse
If a stock rom has no kernel in your view i suggest you read the faqs and guides before flashing anything ever again .
Kernel - This is always supplied with a ROM. It is the beating heart of Android. The ROM cannot function without the kernel. Since all ROMs include a kernel, if you're using a custom Kernel then flash a ROM, you will need to reflash the kernel again.
DutchGlory said:
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...
Click to expand...
Click to collapse
Can you please tell us exactly how you flashed the stock ROM
kkretch said:
Can you please tell us exactly how you flashed the stock ROM
Click to expand...
Click to collapse
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....
DutchGlory said:
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....
Click to expand...
Click to collapse
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.
kkretch said:
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.
Click to expand...
Click to collapse
i never had a problem with 3.0.7 i even tried "mobile ODIN"
DutchGlory said:
i never had a problem with 3.0.7 i even tried "mobile ODIN"
Click to expand...
Click to collapse
What actually happens when you say the spash screen is messed up?
Does the tablet actually start? Have you tried flashing another custom touch wiz based firmware like Revolution HD or even Omni rom?

Managed to Soft brick my S6

So, I a getting the Samsung boot logo after trying this http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-0-t3094423
I have a 920W8, this happened after flashing the modem and bootloader that it recommended. I have tried http://forum.xda-developers.com/showpost.php?p=66351355&postcount=11733
I cant get into TWRP (I got into it once, automatically right after install), but I can get into Odin, but the stock firmware fails on the system.img install.
Nevermind, managed to flash up to 6.0.1, but now I can't get TWRP to stick without bricking it, so no XtreStoLite.
Try to flash twrp using Flashify app. It'll allow you to flash and then boot right into twrp and flash whatever rom you like. I had the same issue as you before and this did it for me.
SkyandDirt said:
Try to flash twrp using Flashify app. It'll allow you to flash and then boot right into twrp and flash whatever rom you like. I had the same issue as you before and this did it for me.
Click to expand...
Click to collapse
No love unfortunately, even with flashify it just stalls at the boot screen. I can use Odin to reflash Chain-fire to fix, but I can't do anything beyond that?
SkyandDirt said:
Try to flash twrp using Flashify app. It'll allow you to flash and then boot right into twrp and flash whatever rom you like. I had the same issue as you before and this did it for me.
Click to expand...
Click to collapse
Got it! Used the arter97 recovery for the g920fi.
JustinHTC said:
Got it! Used the arter97 recovery for the g920fi.
Click to expand...
Click to collapse
any chance you could talk me through it as i have same problem as you. thanks
harrygrout said:
any chance you could talk me through it as i have same problem as you. thanks
Click to expand...
Click to collapse
I'm in the same boat as well, what exactly did you do to fix it?

[TESTING][ROM][7.1.2] CM14.1 for janice [TESTERS NEEDED]

02/22 Update: Project temporarily on hold until March due to school.
03/19 Update: I'm back.
03/27 Update: It booted
Hi S Advance Community! I don't own this device but I compiled CM14.1 and I need testers who know how to logcat, use odin to reflash boot image, etc.
THIS BUILD IS TOTALLY UNTESTED (i don't have an s advance)!!! AS A RESULT, RECOVERY MODE MIGHT NOT WORK AFTER FLASHING THIS ROM AND YOU'LL NEED TO FLASH STOCK ROM USING ODIN IF THAT HAPPENS!
I just need info if it boots or not, and logcat/last_kmsg if it doesn't.
Link of rom (for advanced users only)
YOU AGREE TO NOT KILL ME FOR ANYTHING THAT HAPENS TO YOUR PHONE!
https://www.androidfilehost.com/?fid=745425885120695238 (again, FLASH AT YOUR OWN RISK)
Kernel Source (for GPL Compliance)
EDIT: Use this guide on how to make a logcat/last_kmsg dump when the ROM doesn't boot if you don't know how to (no need to flash the zip on that thread as this rom is an eng build already).
EDIT #2: ROM doesn't boot so I need the /proc/last_kmsg file obtainable from recovery after a failed boot.
Thanks! Downloading it ?
I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.
No-Lags said:
I'm waiting for feedback from the already downloaded it. If successful, please share some screenshots. Thanks in advance guys.
Click to expand...
Click to collapse
Sure
Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.
GabrielR52 said:
Hello the installation was a success, but when he went to the screen from Samsung he stayed frozen in it.
Click to expand...
Click to collapse
Thanks for testing! While the phone is stuck on the samsung logo, can you press the 3 button combo for recovery for 10+ seconds (without pulling the battery before) until the phone boots to recovery and copy /proc/last_kmsg to sdcard using recovery then upload it here? I need to see the kernel logs if it's an init related issue or a library related one.
Yea ! The installation was a success but it didn't boot...Stuck On the splash screen...I will flash it again and will let you know the kernal logs and stuff.....Thanks For your support for Janice
I will send tomorrow because today i haven't had the time, so that the last time I installed this android even holding the 3 keys to enter the recovery mode the cell phone was stopped on the logo of samsung, would have some other way of copying the /proc/last_kmsg ? But tomorrow i will install again and I'll see if i go into recovery, sorry my english if it is bad is that i am from Brazil
On Codina must be enabled SELINUX with boot parameter - 1 and cmdline=selinux.bootmode=permissive to boot up Nougat. For MM this wasn't needed.
Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE
3liteking148 said:
Can someone try flashing this boot.img to see if the rom will boot?
https://drive.google.com/open?id=0Bw4AfK_vJ7JycWV4TmlOeldzWkE
Click to expand...
Click to collapse
After flashing the rom do i have to flash it with recovery?
Tech x 125 said:
After flashing the rom do i have to flash it with recovery?
Click to expand...
Click to collapse
Flash it with TWRP (because twrp can flash images since 3.0)
Rom isn't boot. I'm using Phiz-touch
After flash not work recovery
psycrow17 said:
Rom isn't boot. I'm using Phiz-touch
After flash not work recovery
Click to expand...
Click to collapse
Thanks for reporting! No wonder why no one's giving me logs so I'm gonna make an odin flashable boot.img later with working recovery from some rom.
Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms
Can I expect the recovery has been immersed in a new build? Maybe I'll try for it.
3liteking148 said:
Hi guys! This is the just the odin-flashable tar of the boot image of PolishVodka's CM14.1 as recovery was said to work there.
https://drive.google.com/open?id=0Bw4AfK_vJ7JycVBST3pwS18tdms
Click to expand...
Click to collapse
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list
PolishVodka said:
You know we have kernel + ramdisk + recovery on the same partition (initramfs)?
And here you'll see how this working:
https://github.com/Epirex/Samsung_STE_Kernel/blob/marshmallow/usr/u8500_initramfs.list
Click to expand...
Click to collapse
Yeah I know about that partitioning layout but how should i name the initramfs for flashing in odin?
Edit: nvm about that i got what you're saying that there's something wrong about my initramfs. Thanks for the info
I could not install this new boot.img by Odin and cannot seem to get the log by logcat by that of a mistake "/sbin/sh: exec: line 1: logcat: not found"
????

Categories

Resources