Clockwork said that /sdcard/ couldn't be found when trying to install a zip from SD card, so I used a file browser and found that /sdcard/ only had a few folders, not any of my SDcard contents. So I went to /mnt/sdcard/ and there were the same files as /sdcard/. Then I looked in /mnt/external1/ and found all my SD card files.
Is this how it's meant to be? How can I get Clockwork mod working again?
Thanks
Nobody? :crying:
What ROM are you on? What device model?
Sent from my MZ601 using xda app-developers app
wesamothman said:
What ROM are you on? What device model?
Sent from my MZ601 using xda app-developers app
Click to expand...
Click to collapse
Sorry, the WiFi only version, MZ604. Currently it is running EOS IMM76D nightly, 112.
However CWM still says it can't find /sdcard/, I'm I'm not sure if the ROM caused it.
Can you still access recovery and flash a zip from anywhere accessible in your internal SD card?
Sent from my MZ601 using Tapatalk 2
And I believe you are still on ICS, right? 112 is quite old build...
Sent from my MZ601 using Tapatalk 2
Here is what I would do,
Thru adb, install this recovery IMG, the best recovery for Xoom. http://d-h.st/WtX
Thus recovery will read external SD, put latest ROM, 129, with latest gapps in external SD,
Boot into your new recovery by pressing power vol up together to see moto logo, then vol down, then vol up.
Wipe data, cache, dalvik, flash the last ROM , gapps, reboot.
Sent from my MZ601 using Tapatalk 2
Well this is strange. USB debugging is ON and when I plug the device in, it says so, and it also says it's connected as a media device (but doesn't show up on the computer because the SD card is now external1), but when I do adb reboot bootloader, it says the device isn't connected I tried two cables, both work fine on my HTC One X.
When it says device not connected, try to reboot your Xoom to fast boot, and fire the command. You may have a driver issue , try to use another laptop
Sent from my MZ601 using Tapatalk 2
That didn't help either :L
Same thing on an another computer.
I'll be able to try on another later.
Sent from my HTC One X using Tapatalk 2
I got fastboot to work on my Ubuntu netbook!
I got the latest version of EOS JB on my Xoom now (129). I'll try see now about the SD card. If it is still external1, I'll format it and see what happens. I'll keep you updated
EDIT: Ok, everything seems to be working, sort of. The SD card is now in the right place, only problem is my computer doesn't recognise it. My netbook with Ubuntu does though. I'll check for any drivers etc..
EDIT: I went to device manager and found my Xoom, but there are no drivers..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: I uninsulated it, then scanned for hardware changes and it came back :S The computer recognises it instantly thought when I set to 'Camera (PTP)' and I can access the internal storage
Great,
Drivers issues then, happy for you it was sorted out...
Sent from my MZ601 using Tapatalk 2
Related
I have a friends G2x here I wiped his sdcard cause he said he had a back up but he did not but we had it running on hellfire. He wanted me to install CM7 for him so I went ahead did a factory data reset, wiped cache, delvik, and formated his /sdcard cause it was full and he said he had everything on his computer. Well After doing the wipes an formatting I mounted the sdcard via cwm and put on the cm7.zip and gapp.zip flashed both went to reboot and now it only gets to the second LG boot logo with I guess cm7 design behind it and then reboots so I am bootlooping but I am able to boot into recovery still so I am like WTF happend? lol Ive tried a few things already but I was wondering if anyone had this happen to them? By the way my friend only backed up photos no his whole sdcard so I have no Nandriodbackup :crying: FAIL
also just found out via CWM trying to mount internal SDCARD I get this error:
E: Cant Mount /emmc/
seems like there is no /sys file when I do error report i get
failed to open /sys/class/android_usb/android0/stat: No Such File or directory
Was CWM flashed using nvflash or ROM Manager?
Sent from my LG-P999 using xda premium
I'd use nvflasher and start from scratch. also did you goto mounts and format system?
i always do before flashing new rom.
Sent via G2x on CM7 b135.2 w/faux 52 kernel
Well original install I am not sure he bought the phone an it was rooted but I did do nvflash to cwm and to stock to see if either would boot and it didnt work either way it but I did the NVFLASH CWM so I could have CWM recovery but right now all i can do is boot into recovery if I try to boot system it just bootloops
I have formatted /sys , /sdcard, attempted to format /emmc but it gets an error and says cant mount skip format is it possible his internal sdcard or memory is dead?
Try using the Batch Cleanup tool. You can find it in the Dev section. Then flash a GB ROM and see what happens
Sent from my LG-P999 using xda premium
The G2X is nearly impossible to brick. There is almost no way to brick it. There will always be an answer from the community ready to help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok I am going to try to use that batch clean up tool in the dev section will post results
Ok so did the batch had done it early as well here is a pic of the cmd I ran looks good to me and I am able to boot into recovery but once more I end up boot looping I attempted to install cm7 should I try a different gb rom?
Thanks for the help and suggestions everyone I finally got it did the batch clean up then went ahead and located stock rooted nandroid backup files setup the directory in the sdcard and then restored back up and Booted right up into stock rooted device! I then re-attempted to flash the cm7 latest stable an sends me into boot loop so I am going to say that the rom .zip on that latest cm7 stable is corrupt or something went ahead to the previous stable before that one and flashed it booted right up ! so Thanks a lot again guys and hopefully this will be helpful to anyone else that may encounter this same issue I knew it could be fixed since I could boot into recovery
Hi,
Yesterday i had troubles with my GF's HTC One S ..
I flashed a Custom Kernel on her Viper Rom and i quess i made something wrong... well the sdcard just dissapeared
And i wasnt able to fix her phone...
So now i got a solution her Phone is ressurected and i am
Happy
All steps you have to do to mount your sdcard if it cant be mounted are explained in this script.
How to use:
1) Extract all files in the same folder.
2) Run SDCardFixMenu.bat
3) Follow the instructions.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
http://db.tt/3OkdWWpG
It includes the HTC One S Stock Recovery and CWM Touch
1) Go to Bootloader and select Fastboot and conneCt ur Phone to PC
2) Flash Stock Recovery
3) Now: Go to Bootloader select "CLEAR STORAGE"
4) Now: Go to Bootloader again and select "FACTORY RESET"
5) Now: Go back to Bootloader and select Fastboot and connect USB
6) Flash CWM Touch v5.8.1.5
Congratulation! Your SDCARD should be mounted now,
Now go to CWM Recovery Mount USB Storage and
Copy your Rom to SDCARD and flash it!!!!!!!!
Changelog (26.03.13):
* New Menu Style
If it helped you please hit the Thanks Button.
Sent from my GT-I9001 using xda app-developers app
Re: [FixTool][HTC One S - Mount SDCARD Fix][25.03.13]
Yeah it happened to me recently sd card vanished strange, I just ran an ruu will be interested how you fixed it
It happens because of the new twrp that's all I know try avoid it and use the older version 3.3.0 that's what I'm doing works perfect
Sent from my HTC One S using xda app-developers app
Re: [FixTool][HTC One S - Mount SDCARD Fix][25.03.13]
I actually just had this problem too I thought about packaging it all together to help everyone out but I didn't have time thank you
Sent from my One S using Tapatalk 2
AW: [FixTool][HTC One S - Mount SDCARD Fix][25.03.13]
I think i will do the same.script for linux and mac but not today i have quests
Sent from my GT-I9001 using xda app-developers app
I think a simpler fix is simply this:
1-flash stock recovery
2-boot into stock recovery
I have not heard of this not working yet.
AW: [FixTool][HTC One S - Mount SDCARD Fix][25.03.13]
trathiang said:
I think a simpler fix is simply this:
1-flash stock recovery
2-boot into stock recovery
I have not heard of this not working yet.
Click to expand...
Click to collapse
Only flashing stock recovery and bootin into wont work.
i tryed everything before i did the way i posted and then it worked.
Sent from my GT-I9001 using xda app-developers app
This method was posted awhile ago. Though I suppose it didn't have your nice little .bat.
Please Help!
I can't flash anything to my phone, says can't mount /sdcard. while in recovery, but the sdcard is still accessable through the OS.
The red dragon link is down, says there's to much traffic to the public link. Is there another way to obtain this? I need to flash a call quality fix for Sense 5. Can't hear anything on any outgoing calls.
Please help... I have flashed this: http://forum.xda-developers.com/goog...eview-t2796003 with the recovery method and now I can´t see my files because the mobile sais that I don´t have SD Card. I tried this to solve it using this:
Got "No SDCard" error?
This is because 4.4.x seems to point to: storage/emulated/0 & L points to: data/media/0
Solution:
- Mount system in TWRP/CWM
- Wipe system, dalvik, data, cache
- Unmount system
- Install ROM
- Factory reset
- Reboot
- Go back to recovery & flash SuperSU (link above).
- Reboot
But doing that I only can see the folders, but when I enter in them it doesnt show any file
When I try to restore the nandroid backup that i make before install Android L I cant see the file on TWRP so I can´t restore it... How can I come back to KitKat?
It was mentioned on another thread but I don't remember by whom so can't give proper credit but from a terminal emulator on your phone run
su
storecon -r /data/media/0/*
See if that works
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
It was mentioned on another thread but I don't remember by whom so can't give proper credit but from a terminal emulator on your phone run
su
storecon -r /data/media/0/*
See if that works
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I tried that too, but its doesnt work... :S
kapucho19 said:
I tried that too, but its doesnt work... :S
Click to expand...
Click to collapse
The first time I flashed L I had the same problem. Are you trying to get back to 4.4.4? You're going to lose all data on your device flashing back
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
The first time I flashed L I had the same problem. Are you trying to get back to 4.4.4? You're going to lose all data on your device flashing back
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok, I get back to 4.4.4 by flashing again my ROM and once I did that, I could be able to see files on the KitKat storage, I moved the nandroid to the L storage and I restored it. But now I have the problem that now I have two different storages (The L´s one it´s the preset) How could I change the storage now? restorecon -r... What else?
kapucho19 said:
Ok, I get back to 4.4.4 by flashing again my ROM and once I did that, I could be able to see files on the KitKat storage, I moved the nandroid to the L storage and I restored it. But now I have the problem that now I have two different storages (The L´s one it´s the preset) How could I change the storage now? restorecon -r... What else?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(0 it's the one of KitKat)
Nexus 5 || Android 4.4.4 || Paranoid Android
Guys, as already mentioned a couple of times, please keep all Android L related discussions inside the according Android L Q&A thread
---> Thread closed
Hi all,
I running stock kitkat and have the APK-installed kitkat CWM recovery. the apk from this thread Also in the ( lollipop thread), and I got stuck on recovery, and can't enter download mode. There is a ZIP fix that requires to be flashed from the recovery, but the recovery didn't recognize my external SD card.. So I was wondering if anyone was able to get the recovery to detect an external SD card or USB drive through OTG? and if so, what was the file system and other specs of the sd card?
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aserar said:
Hi all,
I running stock kitkat and have the APK-installed kitkat CWM recovery. the apk from this thread Also in the ( lollipop thread), and I got stuck on recovery, and can't enter download mode. There is a ZIP fix that requires to be flashed from the recovery, but the recovery didn't recognize my external SD card.. So I was wondering if anyone was able to get the recovery to detect an external SD card or USB drive through OTG? and if so, what was the file system and other specs of the sd card?
Thanks in advance.
Click to expand...
Click to collapse
I test all Recoveries for GP2,not works with external SD Card.Cwm in English,Backup is working,but not Restore.With Fat or Exfat not works for me.The Only Recovery is the with chinese Language,but Backup and Restore only in internal Storage.
Thanks letschky. I found another way and managed to save the phone. you can't really count on this recovery.
Aserar said:
Thanks letschky. I found another way and managed to save the phone. you can't really count on this recovery.
Click to expand...
Click to collapse
can you share the "another way"
carboncrome said:
can you share the "another way"
Click to expand...
Click to collapse
I don't know what your problem is cause it depends, but for me the only way I was able to communicate with the device was Sideload. regular ADB didn't work (device was unrecognized). if you are suffering from the same problem I had, check out this thread, but sideload the fix.
Hi there, I'v tried to update my FT101. So I've found the right website for the job, KatKiss ROM MarshMallow 6.0.1 Release. Got a lot of things going for me so I was really in the mood for it.
I came a long way.... until the moment came to update Android itself. Entered the SD card. No SD card found. Oke let`s try another one, no SD card found. Alright, also found a link on how to install the FT101 with a direct cable from a PC. Plugged in the cable from the FT101 to my win10 pc, no connection what so ever! Oke let`s try my win7 pc, no connection what so ever! Oke let`s try the laptop, no connection what so ever! So now I'm running out of ideas, last and final try. Different SD format's, NTFS, FAT, FAT32 and exFAT (tried it with two different card's).
Made some photo's of my progress, is there anyone that can help me further? Please? :fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If the OS you were using is still there, try to see if that detects the SD card
AlexS08 said:
If the OS you were using is still there, try to see if that detects the SD card
Click to expand...
Click to collapse
I can't find the OS anywhere. Seems to be gone :crying:
Can't restore the Android version.
Try using a different SD card
Sent from my LGLK430 using Tapatalk
I've tried two different cards. Still no luck.
Are you plugging a microsd card into the microSD card slot?
Sent from my Transformer TF101 using Tapatalk
AlexS08 said:
Are you plugging a microsd card into the microSD card slot?
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Well yea, what else am I suppose to do with it?
Any other ideas?
I'm still hoping to fix this but i'm gonne need some help with it
So assuming by your pics, you still are able to get into bootloader/APX AND Recovery (TWRP)... So you are not yet completely bricked, this is good.
Your TWRP version is 2.3xx and you wanted KatKiss 6.0 marshmellow.
You needed the latest TWRP 2.8xx, that was in another thread.
Code:
http://forum.xda-developers.com/showthread.php?t=2434422
If you find a way to get the sdcard reading (only formatting linux ext3/4 or FAT32 will work) or the pc to connect to TWRP/APX, install the newest TWRP and reboot the recovery (important), and try again to install KatKiss 6.0mm AFTER the reboot.
Your original USB cable for the asus is in good shape? Not frayed or busted? This is important if you want to recover back to stock:
(I cant post links yet) Download the Original factory firmware and the ASUS drivers from here
Code:
http://www.asus.com/us/support/Download/28/1/0/1/32/
Those should be able to get you back to factory.
Are you using a one-click method to root and do that stuff? Most of them are outdated nowadays, packing in old cwm or old twrps.
If need arises, you should check in Windows Device Manager and see what the TF101 is showing up as when you connect.
To get the right driver for it working:
connect the USB
boot the TF101 into APX/bootloader and leave it there
delete the device in the DeviceManager (and checkbox the Delete drivers as well)
now boot the recovery of the TF101
On DeviceManger delete the new device (and driver checkbox as well) again
disconnect the USB
install the ASUS driverpackage letting it finish installing
then afterwards reconnect the USB
reboot into APX, and driver should install in device manager, when it appears, then reboot into recovery and wait for it to install a driver.
You should see if any of the tools you had used has in its directory adb.exe and the related dll files, open a command prompt in that folder with the files (hold shift when rightclicking the whitespace inthe folder> Open a Command Prompt from here). Then with TWRP open and USB connected, go to Advanced -> Sideload ABD, see if its connecting something in Windows Device Manager. If it is working, then that means you can use in the command prompt
Code:
abd sideload xxxxxxxx.zip
-----------> xxxxxxxx being the filename you want to flash
repeat the command after each one finished with the rest of the zips you want to flash
Hi ich0,
Thank you so much! I'm going to give it a go, I will let you know what happend