I just noticed that the official cm7.2 nightly comes with Rom Manager, Is it safe to use or will it brick my phone? (I knew that Rom Manager wasn't working on our Fit and it actually bricked the phone)
Ghost.X said:
I just noticed that the official cm7.2 nightly comes with Rom Manager, Is it safe to use or will it brick my phone? (I knew that Rom Manager wasn't working on our Fit and it actually bricked the phone)
Click to expand...
Click to collapse
Remove it.
ZmisiS said:
Remove it.
Click to expand...
Click to collapse
Thanks! Already removed it
When u use it right, its safe!!!!!!!!
Sent from my GT-S5670 Galaxy Fit using xda-developers app...
Related
Guys I have the samsung galaxy fit. I am new to rooting. And for installing roms I tried rom manager. When I clicked on flash clockworkmod on the top, it asked me to select my phone. My phone was not in that list. What do I do now?? Is there any custom way to do it??
Sent from my GT-S5670 using Tapatalk
nextgenguy said:
Guys I have the samsung galaxy fit. I am new to rooting. And for installing roms I tried rom manager. When I clicked on flash clockworkmod on the top, it asked me to select my phone. My phone was not in that list. What do I do now?? Is there any custom way to do it??
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
We cannot use Rom manager at the moment....but you can install Clockworkmod recovery....refer the thread below...
http://forum.xda-developers.com/showthread.php?t=1277759
nextgenguy said:
Guys I have the samsung galaxy fit. I am new to rooting. And for installing roms I tried rom manager. When I clicked on flash clockworkmod on the top, it asked me to select my phone. My phone was not in that list. What do I do now?? Is there any custom way to do it??
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Don't use ROM manager.. it'll brick your phone.
For flashing.. use "FITDroid" ROM vishwanath ptl.
Have any of you guys used it?? I just want to make sure that nothing goes wrong. If possible can anyone make a video on the full procedure so that it will be easier for others?? Thank you.
nextgenguy said:
Have any of you guys used it?? I just want to make sure that nothing goes wrong. If possible can anyone make a video on the full procedure so that it will be easier for others?? Thank you.
Click to expand...
Click to collapse
Yaa.. I am using it with many others !!
nextgenguy said:
Have any of you guys used it?? I just want to make sure that nothing goes wrong. If possible can anyone make a video on the full procedure so that it will be easier for others?? Thank you.
Click to expand...
Click to collapse
bro dont worry me too using FITDROIDv2.0 with clockworkmod!!
Sent from my GT-S5670 using xda premium
How to update CyanogenMod 7 on Samsung Galaxy 3 - GT-I5800,
i instal CyanogenMod 7 CM7.1.0-GT-I5800_Alpha7.zip (130.35 MB) ,
now how to instal update that other file
CM7.1.0_GT-I5800_Alpha7_update.zip (93.45 MB)
to fix the bugs?
I tried to find how but i couldnt.
i would be gratefold if someone help me.
Sorry for bad englesh.
you don't need flash update of alpha7 over alpha7 it is same thing...update
zip is for those who are flashing cm7 through cwmlol...
btw: you could ask in cm7 thread instead of opening new thread
btw2: Cm7.2 alpha8 was released already
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus' Rom v 1.0
powered by
Team G3mod-ICS26 kernel by Arakmar
~~~~~~~~~~~~~~~~~~~~~~~~~
when i opened thread i need to ask how to fix android market i can't download enything.
can someone halp me?
shadows87 said:
when i opened thread i need to ask how to fix android market i can't download enything.
can someone halp me?
Click to expand...
Click to collapse
Download this then install it through CWM Recovery.
Smonic said:
Download this then install it through CWM Recovery.
Click to expand...
Click to collapse
Refer to CM A8 Main page, you can find reference to newer Google Play installation.
Well there is CM9 in the forum then why to install CM 7?? U mean why to use bullock cart when the Ferrari is available???
Well anyway , its ICS. so I prefer it
Anyways you can use odin to flash it. Apply update.zip if you want to upgrade the version of CM. That can be done in CWM recovery mode.
Sent from my GT-I5801 through CM 9 using XDA
216.ashutosh said:
Well there is CM9 in the forum then why to install CM 7?? U mean why to use bullock cart when the Ferrari is available???
Well anyway , its ICS. so I prefer it
Anyways you can use odin to flash it. Apply update.zip if you want to upgrade the version of CM. That can be done in CWM recovery mode.
Sent from my GT-I5801 through CM 9 using XDA
Click to expand...
Click to collapse
That is because CM7 (which you refer to as a bullock cart) is actually very smooth, stable and more complete than CM9. The handling on the ferrari is bad now. so some tune ups are required till it becomes stable and most of the things work.
manish19 said:
That is because CM7 (which you refer to as a bullock cart) is actually very smooth, stable and more complete than CM9. The handling on the ferrari is bad now. so some tune ups are required till it becomes stable and most of the things work.
Click to expand...
Click to collapse
Ditto
Sent from my GT-I5800 using xda premium
Hi,
I may be posting this on the wrong thread but here goes :
I have CM7 A8 on my phone. I want to update to 8.1a using the CWM zip file provided by marcell. What I want to know is will it remove my current contacts, apps and data?
Thanks.
Sent from my GT-I5800 using XDA
My phone doesnt start
hello all..
i tried to update my rom to 10.5 using update.zip in recovery mode.. when i rebooted it stopped in GT-I5801 screen.. it dint not reboot my phone for more than 4-5 hrs.. im sure my phone isnt bricked.. kindly help me.. im so worried
Bharathg said:
hello all..
i tried to update my rom to 10.5 using update.zip in recovery mode.. when i rebooted it stopped in GT-I5801 screen.. it dint not reboot my phone for more than 4-5 hrs.. im sure my phone isnt bricked.. kindly help me.. im so worried
Click to expand...
Click to collapse
Pull battery out, put it back in. Hold volume down, home and power button together. This will take you to download mode. Then open odin and flash a rom
Sent from home...
may help
Bharathg said:
hello all..
i tried to update my rom to 10.5 using update.zip in recovery mode.. when i rebooted it stopped in GT-I5801 screen.. it dint not reboot my phone for more than 4-5 hrs.. im sure my phone isnt bricked.. kindly help me.. im so worried
Click to expand...
Click to collapse
or you can do wipe cache or wipe data factory reset that may help..or flash thats ultimate solutin r u sure u used proper .zip file
a friend recently gift me the lenovo a1 but the stock firmware sucks I installed cm7 and now I saw that lenovo recently release a beta ics for the a1 but I'm not sure if I can install ics from cm7 and not from the stock firmware, anybody has installed from cm7? if yes tell me how. ( sorry for my bad english I'm mexican) I,m the only that have a small softkeyboard, icons, options, etc.?
Jpe230 said:
a friend recently gift me the lenovo a1 but the stock firmware sucks I installed cm7 and now I saw that lenovo recently release a beta ics for the a1 but I'm not sure if I can install ics from cm7 and not from the stock firmware, anybody has installed from cm7? if yes tell me how. ( sorry for my bad english I'm mexican) I,m the only that have a small softkeyboard, icons, options, etc.?
Click to expand...
Click to collapse
You can install the slimdroid port using CWM if you want to install the full version from Lenovo you will need to make sure you have the stock recovery installed. It is tricky but it works. Do a quick search and make sure you understand how the bootable sdcards work. The A1 is almost unbrickable but it can get scary at times as long as you have a boot sdcard you will be fine.
I have been running it for a couple of days it works well the battery drains a bit faster but much better than stock. CM7 is very nice too you can't go wrong with either one.
jpisini said:
You can install the slimdroid port using CWM
Click to expand...
Click to collapse
SlimDroid v7.20 ONLY STOCK RECOVERY
CWM=brick
Good to know the other versions all worked on CWM looks like you will need to install the stock recovery before continuing.
Sent from my IdeaTab_A1107 using xda premium
A1 "brick"
Well, i installed the Cmw version of ICS, gmarkall version, but the rom is very unstable, i install the stock recovery but when i tried to boot in recovery it only shows the android and it turns off, any suggesttion? i dont want that horrible Rom
Gmarkell doesn't have a version of ICS he makes CM7 it works very well.
Sent from my PC36100 using xda premium
He does
jpisini said:
Gmarkell doesn't have a version of ICS he makes CM7 it works very well.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
yes he does, he make a flasheable version of ICS for CWM look here: t=1624979http://forum.xda-developers.com/showthread.php?t=1624979
We can try and fix your issues or we can argue your choice.
Sent from my PC36100 using xda premium
jpisini said:
We can try and fix your issues or we can argue your choice.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Well, I flash someone's rom with cwm and its very unstable it doesn't have wifi , gapps, and usb mass storage but it has usb debugging, I was thinking to change the files of the recovery to cwm using adb and do a fresh install of gb, is that ok?
The first thing you are going to want to do if you want to go back to stock and that is probably best and then go from there is download the following.
http://download.lenovo.com/slates/a1/OTA/A107W0_A234_001_015_2643_US.zip
http://www.doc.ic.ac.uk/~grm08/ideapad/cyanogenmod/stock-a1-ramdisk-2643.zip
http://www.doc.ic.ac.uk/~grm08/ideapad/cwm-5.0.2.7-rev3-ideapad-a1.zip
If you have a 16gb device grab
http://forum.xda-developers.com/showpost.php?p=23471133&postcount=409
First flash CWM 5.0.2.7 (you can use the newer one later if you want to but use this one for this)
Then if you have the 16GB model flash stock-mbr.zip and reboot into CWM. (if you have a 2GB device this will hose it the device don't do it)
Then flash the ram disk followed by the 2643 OTA.
If you have an issue installing CWM grab a bootable sdcard there are instructions in the ICS threads and use that to flash CWM.
The A1 is almost unbrickable unless you have a hardware problem you should be able to get it working again.
I inatall the alimdroid but the space for install apps is very reduce and the apps can't move tp th sd card is there any form to change that?
Sent from my GT-P6210 using xda premium
Holy crap.. i found this thread where you download Got Brickbug? App.. i downloaded it and installed it and the result shows that i have a brick bug.. what do i do to avoid getting bricked? Please help!
theejay0625 said:
Holy crap.. i found this thread where you download Got Brickbug? App.. i downloaded it and installed it and the result shows that i have a brick bug.. what do i do to avoid getting bricked? Please help!
Click to expand...
Click to collapse
You have bricked or you have a device that could be potentially bricked?
DigitalMD said:
You have bricked or you have a device that could be potentially bricked?
Click to expand...
Click to collapse
I haven't bricked my tab.. so my tab could be potentially bricked..
theejay0625 said:
I haven't bricked my tab.. so my tab could be potentially bricked..
Click to expand...
Click to collapse
The only way to brick it is to do a factory reset or clear data from the stock ICS 4.0.4 or stock recovery. SO be sure not to do either of those.
But i can do it with CWM? Am i right?
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
But i can do it with CWM? Am i right?
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Yes , make sure it version 6.0.1.2 or higher.
DigitalMD said:
Yes , make sure it version 6.0.1.2 or higher.
Click to expand...
Click to collapse
i still havent updated my CWM since i upgraded to ICS and rooted it last year..
well i guess i reallly have to install the latest CWM
theejay0625 said:
i still havent updated my CWM since i upgraded to ICS and rooted it last year..
well i guess i reallly have to install the latest CWM
Click to expand...
Click to collapse
Yes
Version 5 may not be safe
Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out
niko22225 said:
Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out
Click to expand...
Click to collapse
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
well said sir.
Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2
If i install the bootloader will it work better? The worst problem was that when phone freezed even when trying to play youtube video and I needed to take out battery 4 times a day because of freezes. And If I install all the things which are needed with ROM which would be better xbsall's rom or cm10 / or ThiaiZO3D? I will not act like I know these things I am total noob at this . And Can I brick my phone by changing bootloader or baseband?
Sent from my LG-P920 using xda app-developers app
p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app
Kodaro said:
Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2
Click to expand...
Click to collapse
And what is point of bootloader?
Sent from my LG-P920 using xda app-developers app
niko22225 said:
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Questions should be posted in general section or in a thread about a Rom.
Sent from my LG-P920 using xda app-developers app
Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app
niko22225 said:
Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I have installed Cyanogenmod on Multiple Devices not once has it ever bricked a device infact you're more likely to brick your device flashing official updates xbsall has a a guide to recover from a brick so its not even an issue. please do some more reading ics has root . it has recovery just not a Custom one (CWM/TWRP)thats why wkparks Bootloader exists.
IF you Ain't Devi'N Don't a Start A thread in Dev Section.
@Mod Close thread or move it to General.
actually the root doesn't work because you can't get into recovery.
'waiting for device.'
linuxlol said:
actually the root doesn't work because you can't get into recovery.
'waiting for device.'
Click to expand...
Click to collapse
actually, you should read more carefully
tang097 said:
actually, you should read more carefully
Click to expand...
Click to collapse
nope says 'waiting for device.'
it flashes ICS properly but not recovery.
Power + Vol Down + 3d button does nothing but boot phone normally.
berni987654321 said:
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Is there any guide to set up dualboot? and can I brick my phone with it and does It make phone slow ? I heard about xbsalls rom but it is saying that I first need to install different kernel but I dont know how to do that because my recovery doesnt have that option. And Which 4.1 or 4.2 would you recommend? I already used jb. but camera doesnt work and It would be really pain if I want to take a quick picture and I would need to reboot my phone for different rom with working camera. And If I install kernel will it be set on both of the roms? or I can set different for both of them?. btw Thanks for reply
linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I alreaady tried CM both 7.2 and 10 both didnt bricked my phone and I had CWM recovery working with them...and root too...
CyanogenMod works fine - 100%. The reason it get bricked is BECAUSE whoever installed it didn't even pay attention.
And regarding the CWMR in CM10 - it works. I used ADB-flashable version of OMAP4 BIOS (wkpark V1.25a bootloader), and flashed CWMR at the same time as an option.
P.S. I used SuperSU as original Superuser wasn't properly installed in the nightly distro of CM10. Nevertheless, root works fine.
P.S.S. The reason I bricked my LG Thrill 4G was because I was trying too hard.
Sent from my LG-P920 using XDA