Ingles
hola. I have a motorola Atrix 2 that totally died when he was flashing. not turn in any way with any key combination. comprises only the white LED when I plug the USB cable. the battery is fully charged. I searched through several forums and nothing. they all say that, if the power Prees and the volume key, if the rsd. anything that serves as the cel does not turn in any way and therefore does not recognize the pc and I can not flash it. My question is this. There are some hardware with which to fix the corrupt boot? and I speak as saying boot the pc bios. the phone does not have a week of purchase. but bought by amazon, so no ganrantia. . for those who wonder, since the phone was being updated and the electricity went off and did not finish.
Español
hola. tengo un motorola atrix 2 que se murió totalmente cuando se estaba flasheando. no prende de ninguna forma, con ninguna combinación de teclas. solo prende el led blanco cuando lo conecto al cable usb. la batería esta totalmente cargada . he buscado en varios foros y nada. todos dicen lo mismo, que si apreta el power y la tecla de volumen, que si el rsd. nada de eso sirve puesto que el cel no prende de ninguna forma y por ende no lo reconoce la pc y no puedo flashearlo. mi pregunta es la siguiente. hay algun hardware con el cual se pueda arreglar el arranque corrupto? y hablo del arranque como decir el bios de la pc. el telefono no tiene ni una semana de comprado. pero se compro por amazon, asi que no tiene ganrantia. . para los que se pregunten, pues el teléfono se estaba actualizando y se fue la electricidad y no termino.
Which rom were you flashing, which Android version were you on prior to flashing, and which firmware is your phone on?
Sent from my SAMSUNG-SGH-I747 Anti-MOTO Ballistic Missile
Motorola ATRIX™ 2 MB865
ICS 4.0.4
5.5.1-EDEM-27-MEARET_cfc.xml
Blur_Version.55.28.37.MB865.MERetail.en.06
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285
All signs of a complete brick my friend. I'm sorry to tell ya but you're going to need to get a replacement if under warrenty. Or a new one which would suck cuz of the $$$!
Edit: I know from 1st hand expeirence. I'm actually replacing my replacement again due to speakerphone speaker being all messed up with goo in it. lol.
Sent From My Rooted Motorola Atrix 2 on ICS 4.0.4 Running SCV7!!!
Hi, I'll write in spanish because it's easiest for me:
Hola amigo, me paso algo similar a lo que te paso a ti. En mi caso fue que cuando estaba en ICS borre un archivo del sistema y el equipo no pasaba de la animacion de inicio. Despues de un rato se me descargo el equipo, por eso sale la luz blanca porque la bateria esta baja, y en ese estado debes conseguir un cargador universal para que la puedas cargar pues el telefono no la carga. Una vez este cargada tu bateria sigue este tutorial: http://forum.xda-developers.com/showthread.php?t=1805975
yo lo segui y me funciono a la perfeccion.
Espero que te sirva, desde Panama.
sebajs97 said:
Hi, I'll write in spanish because it's easiest for me:
Hola amigo, me paso algo similar a lo que te paso a ti. En mi caso fue que cuando estaba en ICS borre un archivo del sistema y el equipo no pasaba de la animacion de inicio. Despues de un rato se me descargo el equipo, por eso sale la luz blanca porque la bateria esta baja, y en ese estado debes conseguir un cargador universal para que la puedas cargar pues el telefono no la carga. Una vez este cargada tu bateria sigue este tutorial: http://forum.xda-developers.com/showthread.php?t=1805975
yo lo segui y me funciono a la perfeccion.
Espero que te sirva, desde Panama.
Click to expand...
Click to collapse
What may be easiest for you may not be for others. Not everyone here can read/understand Spanish. Not trying to be a ****, just make things easy on US so it's easier for us to help you...
Sent from my SAMSUNG-SGH-I747 Anti-MOTO Ballistic Missile
Apex_Strider said:
What may be easiest for you may not he for others. Not everyone here can read/understand Spanish. Not trying to be a ****, just make things easy on US so it's easier for us to help you...
Sent from my SAMSUNG-SGH-I747 Anti-MOTO Ballistic Missile
Click to expand...
Click to collapse
Hahahahahahahaha roflfao!
Sent From My Rooted Motorola Atrix 2 on ICS 4.0.4 Running SCV7!!!
Have u tried charging it with a wall charger? I know it's silly but the first time I saw that white light on my a2 I tried charging with usb and the screen was totally blank and I freaked out, usb doesnt provide enough power for charging from death. Btw sorry for my English, just trying to help
Sent from my MB865 using xda app-developers app
negroxor said:
Have u tried charging it with a wall charger? I know it's silly but the first time I saw that white light on my a2 I tried charging with usb and the screen was totally blank and I freaked out, usb doesnt provide enough power for charging from death. Btw sorry for my English, just trying to help
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
white led is a different thing, you get red flashing led if the battery is too low if i remember correctly, but def. not white
Dudes phone is a BRICK. If he can't translate the word BRICK in my post...he's going to keep searching for no reason.
Sent From My Rooted Motorola Atrix 2 on ICS 4.0.4 Running SCV7!!!
Apex_Strider said:
What may be easiest for you may not be for others. Not everyone here can read/understand Spanish. Not trying to be a ****, just make things easy on US so it's easier for us to help you...
Sent from my SAMSUNG-SGH-I747 Anti-MOTO Ballistic Missile
Click to expand...
Click to collapse
In this case the OP posted in both, and his English paragraph certainly looks like a babblefish translation(even labels it English, "ingles" in Spanish.)
That said, I'm 80% sure the OP hardbricked.
Sent from my MB865 using xda app-developers app
FluffyCow said:
In this case the OP posted in both, and his English paragraph certainly looks like a babblefish translation(even labels it English, "ingles" in Spanish.)
That said, I'm 80% sure the OP hardbricked.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Agreed. Id say I'm 99% sure its hard bricked...I got one here in my apartment as I type this. Havent sent it back yet since I'm getting yet anothet replacement A2. The OP matched my hard brick 100% to the letter. Bottom line is, theres nothing the OP can do except replace it or buy a brand new one.
Sent From My Rooted Motorola Atrix 2 on ICS 4.0.4 Running SCV7!!!
Español
amigos gracias a todos, lo e intentado casi todo y el telefono no reacciona
adjunto las imagenes del cargador universal y del telefono
Por favor su ayuda para hacerlo funcionar
Ingles
friends with everyone, and tried almost everything and the phone does not react
pictures attached universal charger and telephone
Please help to make it work
juan_benitesm, at what point during the flashing did your phone "die?" Did it suddenly turn off in the middle of flashing, or did it complete and then not reboot?
Are you 100% sure that:
-The battery is charged to a decent amount
-Holding the power button for a long time does nothing
-Holding the power button and volume buttons for a long time does nothing
If so, then I think that you are "hard bricked." This means that there is no way to get your phone to work again. I'm very sorry but if this is the case there is nothing that we can do... you will have to find a replacement device. I am not sure of how Amazon's warranty works, but you might be able to get a working A2 from Amazon or Motorola.
juan_benitesm said:
Español
amigos gracias a todos, lo e intentado casi todo y el telefono no reacciona
adjunto las imagenes del cargador universal y del telefono
Por favor su ayuda para hacerlo funcionar
Ingles
friends with everyone, and tried almost everything and the phone does not react
pictures attached universal charger and telephone
Please help to make it work
Click to expand...
Click to collapse
Ijole no quiero ser el que te informe de las malas noticias pero tu cellular esta muerto. Esto le paso a muchos que intentaron regreasar a GB desde la primera version de ICS que salio al internet. Desafortunadamente no s puede hacer nada para reparar tu cell. Muchos han tratado pero la mayoria que amolaron su telefono igual que tu, tuvieron que ir a AT&T oh mandarlo a Motorola para que te lo reemplacen si es que tiene guarantia.
Muchos que respondieron tambien creen que tu cel esta muerto, por eso dicen que esta "bricked" por que ya nomas sirve como un tabique. El DX2Trip dice que le paso exactamente lo mismo que te paso a ti, entonces el esta 100% seguro que tu cell ya no funciona.
Pues nimodo, vas a tener que comprar otro cellular y tener mas cuidado con lo que flasheas.Para la proxima pregunta antes de flashear para asegurarte que todo va funcionar sin ningun problema. Mejor prevenir que lamentar.
Roughly translated to English.
Damn I hate to be the bearer of bad news but i'm sorry to say your cell is dead. This happened to alot of people that tried going back to GB from the ICS leak that came out on the net. Unfortunately there's nothing you can really do to fix your phone. A lot of people have tried to fix it but the end result is that they had to contact AT&T or motorola and have it replaced through warranty.
Alot of the people that replied also believe that it's dead, that's why they keep saying "bricked" because that's all it's useful for, as a brick. DX2Trip said that the exact same thing happened to him, so he's 100% sure that your cell doesn't work anymore.
Oh well, looks like you;re going to have to buy a new cell phone and be more careful with what you flash. Next time ask before you flash anything that way you are sure that everything will work without a problem. Better to be safe than sorry.
cogeary said:
juan_benitesm, at what point during the flashing did your phone "die?" Did it suddenly turn off in the middle of flashing, or did it complete and then not reboot?
Are you 100% sure that:
-The battery is charged to a decent amount
-Holding the power button for a long time does nothing
-Holding the power button and volume buttons for a long time does nothing
If so, then I think that you are "hard bricked." This means that there is no way to get your phone to work again. I'm very sorry but if this is the case there is nothing that we can do... you will have to find a replacement device. I am not sure of how Amazon's warranty works, but you might be able to get a working A2 from Amazon or Motorola.
Click to expand...
Click to collapse
He said he was flashing it but that the power went out i the middle of flashing it. He said he looked in multiple forums tried all kinds of button combinations but all the phone does is have a white LED with no RSD or anything. If he tried plugging it into a computer it won't detect it.
He also says he uses a universal charger and that the battery is fully charged.
For old Motorola phones like V3, we can tear down its mainboard, find the test point (just only one point) which can be connected to mass (ground) and flashing software will recognize it (maybe it bypass bootloader) and we flash phone again.
But, so sorry for A2, none of any solving solution now for hard-brick phone.
Just forget it forever and buy a new phone, never look back to Motorola's phones again !
vinamilk said:
Just forget it forever and buy a new phone, never look back to Motorola's phones again ![/B]
Click to expand...
Click to collapse
+1000
Motorola lied and I'm still locked mb865
Español
Hola Amigos
Buscando en la web me encontre con esto.......... sera que funcionara..........
Ingles
Hello Friends
Searching the web I found this .......... will it work ..........
http://www.kineteka.com/microusb-b.aspx
Esto encontre
http://forum.xda-developers.com/showthread.php?t=1438214
Working Motorola Dev Cable
I'll make sure to get some photos up soon of the whole operation.
Anyway I managed to get a Dev Cable built to successfully re-flash firmware to the Atrix. I actually bricked my phone three times and instantly was able to re-flash to 1.8.3 and higher.
So first off I found a previous post on another form about making a dev cable and noticed all you need to do is run a wire from the 1 pin (which is 5V) to the 4 pin (which has nothing attached to it).
Micro USB pin diagram here:
http://www.kineteka.com/microusb-b.aspx
It seemed simple enough, but in reality it is a slight pain to get inside the injected plastic to get to the pins. Basically what I ended up doing (and I'll get pictures up here soon) is cut into the USB cable about 2 inches behind the micro USB plug to make the red wire (5V) accessible. Next I cut off the plastic shielding around the micro USB and slowly pried away the metal clips. The important part here is to not break off the tip of the USB cable that is used to secure the cable to the phone.
Now the hard part… if the plastic is clear then your work is cut out for you and you can just melt the plastic to the 4 pin connector and solder. If it’s not, then you have to do some careful exploring, the best option I have found is to melt the plastic to find the 4 pin. Cutting away the plastic also helps but caution you might cut into the wrong area and sever a wire (I did this twice already). Next step is to clean and solder a wire to the 4 pin connector; I used the wire from a butchered USB cable from this project, make sure the wire is long enough to allow for errors.
Finally run the wire back to the first cut in the USB cable and solder or use heat shrink tubing to bind the Red Wire (5V) to the jumper wire that runs from the 4 pin connector on the micro usb.
With a little luck it should work!
My soldering is not that great and one out of the two cables I made worked.
If you have any questions, ask!
AND
So I found out the best way to un-brick a phone... it's simple as building a Dev Cable. I have tested this three times already on my Moto Atrix and every time I have been able to reload the firmware with RSD.
http://forum.xda-developers.com/show....php?t=1050624
So in a nutshell the best way to do it is to tear apart a micro USB cable. I had to go through four to make one working one, since my soldering skills suck, and run a wire from the 1 pin (which is the 5V) to the 4 pin (which has nothing connected to it), by doing this you're adding 5V to the 4 pin and VIOLA! the phone is able to be powered during a soft brick.... (my bad, I said hard before, didn't realize my mistake till now).
Micro USB pin layout here:
http://www.kineteka.com/microusb-b.aspx
Here's a little more in depth post on it:
http://www.droidforums.net/forum/dro...ory-cable.html
I'll see about having a post on how to make a factory cable here up this weekend, I have to take snapshots on my next cable build.
AND
Q]What are JTAG or Riff Box procedure to unbrick our Atrix 2 ?
Last few days were full of frustration for me I've searched every single website on Internet that could possibly describe me on what can be done to get our phones running after a Hard Brick that was caused by ICS leak. The pain even increases when I see that I've hardbricked without even doing anything that was not possible.
Though there are not exact explanation for our phone but I've seen people getting success for their devices.
I've no warranty so if this problem is not solved I'll probably have to throw my phone in dustbin. As now I don't have warranty I want to fix this phone on my own and I am ready to try every single things that is possible, so for that I need suggestions from all our devs in here.
I've seen people using JTEG and riff box methods to unbrick their phones. I am not familiar with these methods, I want people to explain me these things and what are the chances of unbricking our devices.
I saw this method used for old atrix will this work for us??
http://forum.xda-developers.com/show...9&postcount=16
Alguna respuesta de alguien!!!
juan_benitesm said:
Español
Hola Amigos
Buscando en la web me encontre con esto.......... sera que funcionara..........
Ingles
Hello Friends
Searching the web I found this .......... will it work ..........
http://www.kineteka.com/microusb-b.aspx
Esto encontre
http://forum.xda-developers.com/showthread.php?t=1438214
Working Motorola Dev Cable
I'll make sure to get some photos up soon of the whole operation.
Anyway I managed to get a Dev Cable built to successfully re-flash firmware to the Atrix. I actually bricked my phone three times and instantly was able to re-flash to 1.8.3 and higher.
So first off I found a previous post on another form about making a dev cable and noticed all you need to do is run a wire from the 1 pin (which is 5V) to the 4 pin (which has nothing attached to it).
Micro USB pin diagram here:
http://www.kineteka.com/microusb-b.aspx
It seemed simple enough, but in reality it is a slight pain to get inside the injected plastic to get to the pins. Basically what I ended up doing (and I'll get pictures up here soon) is cut into the USB cable about 2 inches behind the micro USB plug to make the red wire (5V) accessible. Next I cut off the plastic shielding around the micro USB and slowly pried away the metal clips. The important part here is to not break off the tip of the USB cable that is used to secure the cable to the phone.
Now the hard part… if the plastic is clear then your work is cut out for you and you can just melt the plastic to the 4 pin connector and solder. If it’s not, then you have to do some careful exploring, the best option I have found is to melt the plastic to find the 4 pin. Cutting away the plastic also helps but caution you might cut into the wrong area and sever a wire (I did this twice already). Next step is to clean and solder a wire to the 4 pin connector; I used the wire from a butchered USB cable from this project, make sure the wire is long enough to allow for errors.
Finally run the wire back to the first cut in the USB cable and solder or use heat shrink tubing to bind the Red Wire (5V) to the jumper wire that runs from the 4 pin connector on the micro usb.
With a little luck it should work!
My soldering is not that great and one out of the two cables I made worked.
If you have any questions, ask!
AND
So I found out the best way to un-brick a phone... it's simple as building a Dev Cable. I have tested this three times already on my Moto Atrix and every time I have been able to reload the firmware with RSD.
http://forum.xda-developers.com/show....php?t=1050624
So in a nutshell the best way to do it is to tear apart a micro USB cable. I had to go through four to make one working one, since my soldering skills suck, and run a wire from the 1 pin (which is the 5V) to the 4 pin (which has nothing connected to it), by doing this you're adding 5V to the 4 pin and VIOLA! the phone is able to be powered during a soft brick.... (my bad, I said hard before, didn't realize my mistake till now).
Micro USB pin layout here:
http://www.kineteka.com/microusb-b.aspx
Here's a little more in depth post on it:
http://www.droidforums.net/forum/dro...ory-cable.html
I'll see about having a post on how to make a factory cable here up this weekend, I have to take snapshots on my next cable build.
AND
Q]What are JTAG or Riff Box procedure to unbrick our Atrix 2 ?
Last few days were full of frustration for me I've searched every single website on Internet that could possibly describe me on what can be done to get our phones running after a Hard Brick that was caused by ICS leak. The pain even increases when I see that I've hardbricked without even doing anything that was not possible.
Though there are not exact explanation for our phone but I've seen people getting success for their devices.
I've no warranty so if this problem is not solved I'll probably have to throw my phone in dustbin. As now I don't have warranty I want to fix this phone on my own and I am ready to try every single things that is possible, so for that I need suggestions from all our devs in here.
I've seen people using JTEG and riff box methods to unbrick their phones. I am not familiar with these methods, I want people to explain me these things and what are the chances of unbricking our devices.
I saw this method used for old atrix will this work for us??
http://forum.xda-developers.com/show...9&postcount=16
Click to expand...
Click to collapse
Related
Sup guys, probably you've read a lot of these kind of threads, but please take a minute to check my situation
Some data first:
Samsung Focus, software version 7.0 (7004), zune is installed on Windows 7 Ultimate 32 bit edition.
Sooo, I was able to do all that unlock wizardry, and sideload a few apps.
Then, suddenly the unlock tool stopped working, showing me the typical "connect to usb and open Zune, you retard" stuff.
Then I notice all the apps stopped working (Microsoft has revoked this app, please uninstall blah blah we're evil blah).
So I read that I needed to unlock my phone again to make the apps work once again.
and there I went, reinstalled zune, run the unlocker in compatiblity mode, reset the phone, and still the unlocker shows me the stupid alert.
Any advice? Can't even add my custom ringtones!
ALSO: Is there another way to unlock the phone?
Search for prevent wp7 from relocking, its easy and only takes a few steps
Sent from my HD7 using XDA Windows Phone 7 App
Yep, I'm totally doing that, but I have to unlock again first
I have the same problem ):, any solution?
HEY! fjosep,
go to settings, about, more info, and touch reset your phone
and install again the .cer and run the chevron.exe
this its works for me!
sorry for my english i´m from mexico
internet6 said:
HEY! fjosep,
go to settings, about, more info, and touch reset your phone
and install again the .cer and run the chevron.exe
this its works for me!
sorry for my english i´m from mexico
Click to expand...
Click to collapse
I did that yesterday and no luck :/
Gracias de todas formas
mmm yo lo que hice fue resetear el telefono y luego volverme a enviar el .cer y el chevron funciono como nuevo,
intenta enviarte el certificado denuevo, sin importar que ya lo tengas
No hay caso , solo me abre el programa, pero al hacer click en "unlock" me tira lo del usb y zune
pero ya hiciste eso? hacer el hard reset de el celular y volverte a enviar el certificado?
eso fue lo que me funciono a mi S:
Have you tried this method? Worked for me when I ran into the same issue. Did this and then made it to where it won't relock.
Laquox said:
Have you tried this method? Worked for me when I ran into the same issue. Did this and then made it to where it won't relock.
Click to expand...
Click to collapse
I'll try it when I get back,
Ok, so I found 2 step-by-step methods, but both ask for the phone to be unlocked. And that's my problem
I had a similar problem where i could unlock easily, but one day, i just couldnt unlock my phone again (pre-nodo at the time)
So i just hard reset my phone back to the day i bought it, and it worked straight off again.... never had any problems with it after that...
The hard-reset is the one you do with the power button, the camera and the volume -?
I tried that and no luck
Have you tried unlocking from another computer? I don't know exactly how or why (probably related to me screwing with the Windows registry,) but the Chevron unlock stopped working on my laptop but would run fine on my desktop computer.
If the unlock works from another computer, apply the fix to prevent it from re-locking ASAP
As I said in another thread, was trying for a long time to unlock, couldn't.
I'm not very sure how it happened (via updating the phone to NoDo or else) but my Zune got updated and I couldn't unlock.
What I did is uninstall Zune, reset and reinstalled 4.7 with no internet connection. It can unlock now. Try this, maybe it works for you.
Thanks both, I'll try what you say, very good advices here
FJosep said:
The hard-reset is the one you do with the power button, the camera and the volume -?
I tried that and no luck
Click to expand...
Click to collapse
noo! ese no es el hard reset es como yo te había dicho te vas a settings luego a about despues en more info y abajo dice reset your phone, ai es
se te borraran todas las aplicaciones y musica y todo lo que tengas pero ya podras hacer el unlock
asi me funciono a mi y tenia exactamente el mismo problema que tu
me cuentas como te fue
Ok, hice eso y tampoco tendré que esperar a una nueva herramienta para desbloquear... o que Microsoft habilite el mercado en latinoamérica.
try:
go to c:\windows\system32\drivers\etc\ and edit the host file and erase all windowsphonedeveloper links
thanks, but still no luck
hello friends, I need your help. when trying to update my 710 Lumia update failed to disconnect the mobile and the pc, this has gone and I can not in any way you turn, it seems that is dead. I can do. thanks
Please describe what happens when you try to turn the phone on. Including a picture may help.
Also, feel free to include an untranslated version of your posts in your native language, so long as you also have an English translation. Some people may be able to help you better if they speak the same language.
cuando intento encender o conectar al pc el movil no hace nada, es como si estuviera muerto. de todas formas gracias por intentar ayudarme, ayer fui al sat express y me lo tienen que enviar al sat de nokia.
when I try to turn on or connect to pc the phone does not do anything, it's as if dead. anyway thanks for trying to help me, yesterday I went to express and I sat have to send to nokia sat
finalmente me han contestado del sat de nokia y no lo entiendo. me dicen que quemo la placa por entrar agua y no lo cubre la garantia, asi que me piden 87e por la reparacion. les he contestado diciendo que a mi nunca me cayo agua en el telefono. que puedo hacer. he puesto una queja en nokia support.
I finally have answered the nokia sat and do not understand. I say burn the plate into water and not covered under warranty, so I asked the repair 87e. I have replied saying that I never water fell on the phone. I can do. I put a complaint in nokia support.
A big HI From Peru!
So my problem is that suddenly imy cellphonet stop working, it doesnt turn on, it is not recognized on the laptop as usb, Ive already tried to star as boot mode but nothing. What Ive found curious is that whenever I put on the battery, the cellphone gets warm like if it is working but its not.
Ive tried to use ubuntu from a CD , not installed, and the cellphone is not recognized by the unbrickable resurrector NO IDEA WHY NOT!
Please if anyone knows how to repair this I wil be thankful!.
Gracias!!
Have you try to boot in download mode ?
You have to plug the phone in while holding vol up and down if I remember correctly
Envoyé depuis mon Nexus S avec Tapatalk
BenHeng said:
Have you try to boot in download mode ?
You have to plug the phone in while holding vol up and down if I remember correctly
Envoyé depuis mon Nexus S avec Tapatalk
Click to expand...
Click to collapse
not working either
How about charging?it is charging normally?
Sent from my Galaxy Nexus using Tapatalk 2
al_madd said:
How about charging?it is charging normally?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Its not charging because the screen is off, how could i possible know if it needs charging? the power button doesnt work, and when i try to connect it to my Laptop it doesnt recognize it!
When i put the battery on the cellphone it suddenly gets warm... whys that?
Your phone died in time to order a Nexus 4?
Have you tried booting into bootloader by pressing power and vol. up?
consige un amigo que lo flashee con una BOX .. esas cajas que son de servicio
a mi me paso lo mismo y fue la unica manera de corregirlo
es posible que tengas el bootloader corrupto
Box de servicio?
amd1982 said:
consige un amigo que lo flashee con una BOX .. esas cajas que son de servicio
a mi me paso lo mismo y fue la unica manera de corregirlo
es posible que tengas el bootloader corrupto
Click to expand...
Click to collapse
Saludos amigo.
Mi Nexus está más o menos igual, enciende pero no es detectado por ningún ordenador al conectarlo vía USB,
A qué te refieres con esa BOX (caja de servicio?)
Gracias.
iris_ebert88 said:
A big HI From Peru!
So my problem is that suddenly imy cellphonet stop working, it doesnt turn on, it is not recognized on the laptop as usb, Ive already tried to star as boot mode but nothing. What Ive found curious is that whenever I put on the battery, the cellphone gets warm like if it is working but its not.
Ive tried to use ubuntu from a CD , not installed, and the cellphone is not recognized by the unbrickable resurrector NO IDEA WHY NOT!
Please if anyone knows how to repair this I wil be thankful!.
Gracias!!
Click to expand...
Click to collapse
Hi
Ru rooted or stock?
If rooted, what recovery & ROM?
What kernel, what setting(Did u have it over clocked?)
What was it doing before this happened...... in a call, playing a game, an app.... etc
The more info the better
Thx
Vs Nexus S4G using tapatalk2
......
iris_ebert88 said:
A big HI From Peru!
So my problem is that suddenly imy cellphonet stop working, it doesnt turn on, it is not recognized on the laptop as usb, Ive already tried to star as boot mode but nothing. What Ive found curious is that whenever I put on the battery, the cellphone gets warm like if it is working but its not.
Ive tried to use ubuntu from a CD , not installed, and the cellphone is not recognized by the unbrickable resurrector NO IDEA WHY NOT!
Please if anyone knows how to repair this I wil be thankful!.
Gracias!!
Click to expand...
Click to collapse
I got the same problem, mine get warm when i put it on the charger, it shows me a black screen foor 13 secs and then turns off for 4.5 seconds and then turns on black screen for 13 seconds etc. Power buton does nothing, computers wont recognize, tried resecutor too. Nothing working.
Just send it to Samsung, because it probably is a burnt through motherboard... had the same recently, was repaired under warranty!
Sent from my Galaxy Nexus using Tapatalk 2
Yeap, same here, fried motherboard, they took care of in the terms of warranty
Sent from my Nexus S using xda premium
nexususer1 said:
Yeap, same here, fried motherboard, they took care of in the terms of warranty
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Mother of dragons!!! I dont have warranty cause I bought it on ebay, just 8 months ago!. 300 dollars to the trash. Never again samsung!.
Any hopes on using that famous "box" they are mention?
amd1982 said:
consige un amigo que lo flashee con una BOX .. esas cajas que son de servicio
a mi me paso lo mismo y fue la unica manera de corregirlo
es posible que tengas el bootloader corrupto
Click to expand...
Click to collapse
Cuando le pusieron cablecitos para medir voltaje a la placa madre, dijeron que no recibía nada, la batería si, pero la placa no, y que con eso ya no se puede hacer nada; crees que usando el box aùn tenga esperanzas?
amd1982 said:
consige un amigo que lo flashee con una BOX .. esas cajas que son de servicio
a mi me paso lo mismo y fue la unica manera de corregirlo
es posible que tengas el bootloader corrupto
Click to expand...
Click to collapse
Me dijeron que mi la placa no recibìa estimulo de corriente? le pusieron dos cositas pa medir la corriente creo, lo mismo le hicieron a la bateria, pero esta si funcionaba. Tu crees que con el box se pueda arreglar si es problema de placa?
oops
jojoost said:
Just send it to Samsung, because it probably is a burnt through motherboard... had the same recently, was repaired under warranty!
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
hello, mine also with exact same problem.. heating but not turning on... is there any way that i can copy the data from the memory ... plz reply fast
Has anyone tried a jig lately I just fixed my non booting no recovery or IMG nexus 9020t all I did was jig it up connect to PC it installed the drivers or get kies/PDA net install those drivers either or then finding the files is where it was hard as no1 uses Odin but once you get em you should be good
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Didnt understand
krazierokz said:
Has anyone tried a jig lately I just fixed my non booting no recovery or IMG nexus 9020t all I did was jig it up connect to PC it installed the drivers or get kies/PDA net install those drivers either or then finding the files is where it was hard as no1 uses Odin but once you get em you should be good
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Excuse me i didnt understand ur reply . could u elaborate it
Me too
I can not recognize
Hello, i am new here, i am looking for a image rom official or not that run in my overtech 05 lte, from china with android 6.0 processor arm 4 cores, i do not how but i have got malware and can not run if it is not connected to the wall charging, but when you connect appears the real charge (80%), (90%), etc, so i decided to clean and restart from scratch, but i can not find the ROM that run with my phone, no problem if it is a clone, if anybody can help, i will be glad. Thanks
That phone is a crap, came with malware from factory I'm in the same situation qith an Overtech O6. Did you find any solution about it?
Ese teléfono es una porquería, vienen de fábrica con malware, yo estoy en la misma situación con uno modelo O6. Encontraste alguna solución ?
Hello, i need help. I try to install twrp and the phone now is bricked. No fastboot mode just go to recovery, that what show in adb devices. I can´t do anything because is in black screen.
Can anyone help me?
And sorry if im in wrong tread.
Thanks
It's resolved. I use adb shell to remove some files.
Thanks anyway,
Hello there, may i bother you time to teach me how to recover from your 9a bricked and just go black screen???
I already have this problem for almost 2 month and still can`t find the solution. Our difference was, i already install twrp and also already flash rom and suddenly its goes black.
Some simple solution that i read is, i drained dead my battery so need to charge it for a few hours, or maybe a whole day or two i heard. I already tried to charge it almost 3 days, still can get it to boot to fastboot or recovery.
And 1 more problem, my 9A only can be read by PC if I bypass the EDL using TEST POINT from my hardware, and i have tried many kinds of flashing tools and also downloaded a bunch or ROMs based on guides i read from forum here and there.
Please if you have the solution for my problem, it will means a lot to me.
Thx before.
cingcopa said:
Hola, ¿puedo molestarte para que me enseñes cómo recuperarte de tu 9a bricked y pasar a la pantalla negra?
Ya tengo este problema durante casi 2 meses y todavía no puedo encontrar la solución. Nuestra diferencia fue que ya instalé twrp y también flash rom y de repente se vuelve negro.
Una solución simple que leí es que se me acabó la batería, así que necesito cargarla durante unas horas, o tal vez uno o dos días completos, según escuché. Ya intenté cargarlo casi 3 días, todavía puedo hacer que arranque para fastboot o recovery.
Y 1 problema más, mi 9A solo se puede leer en una PC si paso por alto la EDL usando el PUNTO DE PRUEBA de mi hardware, y probé muchos tipos de herramientas de actualización y también descargué un montón de ROM según las guías que leí del foro aquí y allí.
Por favor, si tiene la solución para mi problema, significará mucho para mí.
Gracias antes.
Click to expand...
Click to collapse
Hola, ya encontraste una solución, estoy en el mismo caso
cingcopa said:
my 9A only can be read by PC if I bypass the EDL using TEST POINT from my hardware
Click to expand...
Click to collapse
Hello, from my understanding, if you can enter EDL, you could make a full reflash with SP Flasher, to revert to factory !
I have a slightly different problem, my 9A is in a bootloop, not possible to enter fastboot, no recovery.
I would like to use SP Flash tool, but i don't know the EDL hardware test-pins.
Please share a picture of the EDL hardware pins, if you know how to force enter EDL without adb/fastboot/twrp.
Thanks.
MaykoDiaz7 said:
Hola, ya encontraste una solución, estoy en el mismo caso
Click to expand...
Click to collapse
This PARKING..... problem(if u know what i mean), hunts me from 2021, and now is 2022 still there is no solution, and hopes the next post in this threads will be theards with with all the answers, because guess what what??
IT'S WHAT WE ALL HOPE FOR, A BETTER YEAR...
(Happy new year all btw )
And for sure i will post a solution right away to this tread, if i already have the solution.
btw some personel advice for you is
https://forum.xda-developers.com/t/xda-developers-forum-rules.4200559/
(esp rules 4)
(for those who don't like bull**** and think don't like bull**** just skip this next, or maybe owner thread can just remove this post also, no hard feelings or juding here ok, coz i really just tried to make a very very very little good deeds here just for a better year especially since C-19 for me and of course for us all. english was also not my mother tounge langguage, i'm not bother to spent a little more time using g-translate to respect other)
kukudro said:
Hello, from my understanding, if you can enter EDL, you could make a full reflash with SP Flasher, to revert to factory !
I have a slightly different problem, my 9A is in a bootloop, not possible to enter fastboot, no recovery.
I would like to use SP Flash tool, but i don't know the EDL hardware test-pins.
Please share a picture of the EDL hardware pins, if you know how to force enter EDL without adb/fastboot/twrp.
Thanks.
Click to expand...
Click to collapse
hello to there, thx for your reply..
attached there...
(unique approaced this one)
cingcopa said:
attached there...(unique approaced this one)
Click to expand...
Click to collapse
Hello,
I don't understand the meaning, you sent 3 pics containing a tweezer.
Was that a joke, sarcasm, or misunderstanding?
I had the impression that you already know the EDL test points for Redmi 9A.
I was just asking for a PCB picture with the EDL points marked for Redmi 9A (example I found for 9T, but PCB looks different : https://www.edlpoint.com/wp-content/uploads/2021/08/mi-9t-test-point.jpg)
kukudro said:
Hello,
I don't understand the meaning, you sent 3 pics containing a tweezer.
Was that a joke, sarcasm, or misunderstanding?
I had the impression that you already know the EDL test points for Redmi 9A.
I was just asking for a PCB picture with the EDL points marked for Redmi 9A (example I found for 9T, but PCB looks different : https://www.edlpoint.com/wp-content/uploads/2021/08/mi-9t-test-point.jpg)
Click to expand...
Click to collapse
"Please share a picture of the EDL hardware pins" from my understanding is that u are asking for hardware i used to by pass the edl mode. So sorry if im mistaken, im still newbie here. So forgive me if i misunderstood what u mean.
And btw, if you had the impresssion that i already know the EDL test points for Redmi 9A, why you still ask for the picture???
Was that a joke, sarcasm, or misunderstanding???
Nevertheless, here is the picture u asked for sir.