Database Info

Problem Flashing Samsung Infuse

Hello:
First and foremost I must say that I do not know much english and non-ce write it. What I am doing is translating from Spanish to English and when I read in the forum so i translate to Spanish to be able to understand.
Well i've been reading to see if i see something of the problem i have with my Infuse and i'm trying to Flash my Infuse, but when it came to Rom Manager and then Flash ClockWorkMOD Recovery i get a phone list, but the my does not appear i chose Galaxys Samsung i9000 and i get Successfully downloaded ClockWorkMOD recovery,but alleged mind has to leave a yellow bar and do not see at any time the yellow bar.Then I went to Quick Boot and i got no reboot system now then i would like to reinstall Packages and i get error (E:Failed to verify whole-File) (E: Singnature verification failed(Installation aborted) created by what I have read here the problem is that the Android System is Recvery< 3e> and you have to be in < 2e> to enter the Clockworkmod.
Any help that I can provide is grateful in the soul.

javomarlin said:
Hello:
First and foremost I must say that I do not know much english and non-ce write it. What I am doing is translating from Spanish to English and when I read in the forum so i translate to Spanish to be able to understand.
Well i've been reading to see if i see something of the problem i have with my Infuse and i'm trying to Flash my Infuse, but when it came to Rom Manager and then Flash ClockWorkMOD Recovery i get a phone list, but the my does not appear i chose Galaxys Samsung i9000 and i get Successfully downloaded ClockWorkMOD recovery,but alleged mind has to leave a yellow bar and do not see at any time the yellow bar.Then I went to Quick Boot and i got no reboot system now then i would like to reinstall Packages and i get error (E:Failed to verify whole-File) (E: Singnature verification failed(Installation aborted) created by what I have read here the problem is that the Android System is Recvery< 3e> and you have to be in < 2e> to enter the Clockworkmod.
Any help that I can provide is grateful in the soul.
Click to expand...
Click to collapse
have you tried the one click so you can flash a rom..?
http://forum.xda-developers.com/showthread.php?t=1524081
post one gives you stock...
then post two CWM to allow you to put custom rom

bigjoe2675 said:
have you tried the one click so you can flash a rom..?
http://forum.xda-developers.com/showthread.php?t=1524081
post one gives you stock...
then post two CWM to allow you to put custom rom
Click to expand...
Click to collapse
Hello,bigjoe2675:
i haven't tried one click, i'm going to try and i'll let you know how I was ...
Thanks for the help so fast.

Hello:
Lower these programs:Heimdall One-Click Return to Stock UCLB3, Depositfiles Link#2 and here's another to try, but I would like to know if there is a written guide or a video to my phone instalarsela...
thanks.

javomarlin said:
Hello:
First and foremost I must say that I do not know much english and non-ce write it. What I am doing is translating from Spanish to English and when I read in the forum so i translate to Spanish to be able to understand.
Well i've been reading to see if i see something of the problem i have with my Infuse and i'm trying to Flash my Infuse, but when it came to Rom Manager and then Flash ClockWorkMOD Recovery i get a phone list, but the my does not appear i chose Galaxys Samsung i9000 and i get Successfully downloaded ClockWorkMOD recovery,but alleged mind has to leave a yellow bar and do not see at any time the yellow bar.Then I went to Quick Boot and i got no reboot system now then i would like to reinstall Packages and i get error (E:Failed to verify whole-File) (E: Singnature verification failed(Installation aborted) created by what I have read here the problem is that the Android System is Recvery< 3e> and you have to be in < 2e> to enter the Clockworkmod.
Any help that I can provide is grateful in the soul.
Click to expand...
Click to collapse
Saludos amigo, cuentame cual es el problema que tienes para ayudarte, esta comunidad es como una familia, aqui me han ayudado muchisimo y si puedo ser util en cualquier cosa pues lo hago con mucho gusto, espero que postees en ESPANOL....

kalebdevil said:
Saludos amigo, cuentame cual es el problema que tienes para ayudarte, esta comunidad es como una familia, aqui me han ayudado muchisimo y si puedo ser util en cualquier cosa pues lo hago con mucho gusto, espero que postees en ESPANOL....
Click to expand...
Click to collapse
Hola kalebdevil:
Ok!!! lo primero que le hice fue el Infuse Root Unlock y lo verique con el Root Check Basic para saber si estaba bien echo el Root, todo bien. Luego consegui el Rom Manager y el Quick Boot, pero cuando entro a Rom Manager
y luego a Flash ClockWorkMOD Recovery me sale una lista de telefono, y el mio no aparesio y escogí Samsung GalaxyS i9000 y me sale Successfully downloaded ClockworkMod recovery,pero supuesta mente tiene que salir una barra amarilla y no veo en ningún momento la barra amarilla. Luego fui a Quick Boot y no me salio reboot system now luego le doy a Reinstall Packages y me sale error (E:Failed to verify whole-File) (E: Singnature verification Failed)(Intallation aborted) Despue de todo esto segui buscando en internet y me encontre con un video de How to Install Clockworkmod Recovery on the Samsung Infuse 4G que lo iso nuetro conpañero qbking77,pero me confundi cuando estaba poniendole al Recovery el .orig y lo enimine despues entre a Quict Boot y luego ledi a
Reinstall Packages y me salio el erro que dije antes y como no tenia otra opcion
oprimi en Reboot System Now y se quedo en el logo de Samsung. Ya tu sabes me asuste y dije se chavo el cel, pero encontre unprograma de Odin y lo subi de nuevo y de hay en adelante no he podido flashear una Rom.
Gracias por la a Yuda

thx Kaleb, lets see if the one click will work...think i got what he was saying in his post...
ok first lets download a fresh one click, here is the one click to stock click me
ok once we have this file it is a exe file, just double click it and get it a second or two to open:
while that is going put the phone into download mode: DOWNLOAD mode: turn off phone.... open back cover, Remove battery. Press and hold both volume buttons. Plug in USB cable and then insert battery.
1. Put your phone into Download Mode. that is what we did up above.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
then once it boots...let it sit for few min....And if your gonna flash a rom I would put it on the sd card at this point...
Then now if you want put CWM on to flash a ROM,
Download this file to put CWM on it is a one click also: click me
>Put your phone back into DOWNLOAD mode after your phone has booted up.
Flash this package. It is Entropy512's DD kernel. same way you did the one click to stock....It will boot your phone completely.
------------------------------------
and below is when you want to flash a rom...but lets get the above going...
Once the phone has booted into stock ROM, use the three fingers technique to get into recovery.
Recovery Mode: Power off, hold both volume buttons and the power button at the same time. Samsung logo should come on. Let go only the power button, Keep holding the volumes buttons for 12-15 seconds and let go.
When in CWM:
I recommend the following to get the cleanest flash that has not failed me.
1. Wipe data/factory reset.
2. Wipe Cache.
3. Go to Advance: wipe dalvik cache.
4 Go back and into Mount and Storage: format system, format data, format cache.
5. Go back to main and flash your ROM.
---------------------------------------------------------
all this take from qkster thread, so give him the thanks...
http://forum.xda-developers.com/showthread.php?t=1524081

Hello, bigjoe2675:
i'm going to download and then I tell you as I was.
Once again thanks

javomarlin said:
Hello, bigjoe2675:
i'm going to download and then I tell you as I was.
Once again thanks
Click to expand...
Click to collapse
Cuentame javimarlin pudiste hacer lo que te indico bigjoe? Como te fue? Espero todo te haya salido bien, no dudes en escribirme sino entiendes algo o si necesitas ayuda, cuentame hermano de que pais eres?
Sent from my SAMSUNG-SGH-I997 using xda premium

Hello,bigjoe2675 y kalebdevil:
I would like to give you the thanks to you and all those who are in one or another way helped me to flash my phone. Good now i would like to see mediera your opinion if i can install this ROM: INFUSE 4G WITH MIUI GALNET ICS 4.0 [2.11.26 ] very fast to my phone.
Once again I am very grateful.

I would stay away from that...till you do a lil more learning...more stable rom available... kk

javomarlin said:
Hello,bigjoe2675 y kalebdevil:
I would like to give you the thanks to you and all those who are in one or another way helped me to flash my phone. Good now i would like to see mediera your opinion if i can install this ROM: INFUSE 4G WITH MIUI GALNET ICS 4.0 [2.11.26 ] very fast to my phone.
Once again I am very grateful.
Click to expand...
Click to collapse
Like at bigjoe says stay away from those roms, in my opinion star with vagabond, then you can try emancipation, and another else.... remember first to all you need to READ READ READ and then READ over and over, that's the only way to learn, and please from time to time splash some thanks....
Bigjoe sir, mission accomplished....
Sent from my SAMSUNG-SGH-I997 using xda premium

kalebdevil said:
Cuentame javimarlin pudiste hacer lo que te indico bigjoe? Como te fue? Espero todo te haya salido bien, no dudes en escribirme sino entiendes algo o si necesitas ayuda, cuentame hermano de que pais eres?
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Hola kalebdevil:
Todo me salio bien aun que cuando el el teléfono reinicio la pantalla se puso de muchos colore (Toda Distorsionada),pero hasta ahora esta bien por que no he podido jugar un poco con el, pero me gustaría instalar la Rom que dije arriva.
ps. Yo soy de Vega Baja, Puerto Rico

javomarlin said:
Hola kalebdevil:
Todo me salio bien aun que cuando el el teléfono reinicio la pantalla se puso de muchos colore (Toda Distorsionada),pero hasta ahora esta bien por que no he podido jugar un poco con el, pero me gustaría instalar la Rom que dije arriva.
ps. Yo soy de Vega Baja, Puerto Rico
Click to expand...
Click to collapse
Ok javomarlin, fijate esos colores que salen al principio se debe a que tu tlf no tiene lo bootloaders de Gingerbread, eso se soluciona muy facil, vuelve a colocar el tlf en download mode y repite todo lo que hiciste con la salvedad de que ahora una vez se reinicie el tlf lo desconectas de la pc y sin cerrar el programa marcas la casilla que dice bootloaders, espera que el tlf se reinicie, le sacas la bateria y lo vuelves a colocar en download mode, le das a flashear y voila.... ya tienes los GB bootloaders, ya con eso puedes flashear la rom que quieres inclusive esa que quieres miui.....
Yo la verdad no te la recomiendo, vas a perder ciertas funciones de tu tlf como el Bluetooh etc etc etc, esas roms no estan hechas para estos modelos y tienen muchos bugs, pero en fin tu decides cual colocar, suerte y cuentanos como te fue....
Sent from my SAMSUNG-SGH-I997 using xda premium

kalebdevil said:
Ok javomarlin, fijate esos colores que salen al principio se debe a que tu tlf no tiene lo bootloaders de Gingerbread, eso se soluciona muy facil, vuelve a colocar el tlf en download mode y repite todo lo que hiciste con la salvedad de que ahora una vez se reinicie el tlf lo desconectas de la pc y sin cerrar el programa marcas la casilla que dice bootloaders, espera que el tlf se reinicie, le sacas la bateria y lo vuelves a colocar en download mode, le das a flashear y voila.... ya tienes los GB bootloaders, ya con eso puedes flashear la rom que quieres inclusive esa que quieres miui.....
Yo la verdad no te la recomiendo, vas a perder ciertas funciones de tu tlf como el Bluetooh etc etc etc, esas roms no estan hechas para estos modelos y tienen muchos bugs, pero en fin tu decides cual colocar, suerte y cuentanos como te fue....
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Hola mi herma nito:
Gracias por la aclaración. Es que tenia un poco de dudas cuando lo estaba flasheando por que la guia que me dio bigjoe2675 yo las tengo que traducir y aveces no son muy es pacificas, pero se entiende bastante, lo voy a volver hacer y luego te dejo saber como me fue.
Me gustaría si puedes y no es molestia cual Rom tu me recomienda que este 100% funcionado y que no pierda nada como de dijiste. haaa para terminar de molestarte si me puedes ayudar con una guia para flashear la ROM o es lo mismo que hice.
Estoy muy agradecido con ustedes.

Hola
Volví a flashear el Tlf y cuando reinicio lo desconecte de la PC, pero me volvió a salir la pantalla distorsionada con muchos colores y cuando marque la casita Flash Bootloaders me salio este mensaje:
Flashing Bootloaders is Risky
If yuo are unsure this package requires bootloaders
If is best not to flash them as it can cause
perminant, irrepairable damage to your unit.
By selecting Yes, you understand that you are flashing at you own risk
Y no me atrevi a Flashear el telefono. espero ha que me digas que hacer.

I want to thank kalebdevil, bigjoe2675 and qbking77 you for helping me and remove a little of your valuable time, and explain to flash my phone. With your help achieve,but I am leaving an authentication error of Google Talk, and another that says that I have lost the data and is not that beached is,but now I am not bothering you or wasting our time with the phone, after that you can make calls and test with the other thing is the additional.
javomarlin

javomarlin said:
I want to thank kalebdevil, bigjoe2675 and qbking77 you for helping me and remove a little of your valuable time, and explain to flash my phone. With your help achieve,but I am leaving an authentication error of Google Talk, and another that says that I have lost the data and is not that beached is,but now I am not bothering you or wasting our time with the phone, after that you can make calls and test with the other thing is the additional.
javomarlin
Click to expand...
Click to collapse
google talk error:
go to Settings/application
clear out the google frameworks data and cache
clear out the google talk data and cache
reboot
re-sync

qkster said:
google talk error:
go to Settings/application
clear out the google frameworks data and cache
clear out the google talk data and cache
reboot
re-sync
Click to expand...
Click to collapse
Ok!!! thank you for the information.

bigjoe2675 said:
have you tried the one click so you can flash a rom..?
http://forum.xda-developers.com/showthread.php?t=1524081
post one gives you stock...
then post two CWM to allow you to put custom rom
Click to expand...
Click to collapse
Hello:
after i do the Stock One Click lost the Root that had, I can return to the root.
Thank you very much.

[Q] How hard reset ematic funtab 7" FTABCP

I bought this tablet on ebay for my daughter. But It came password locked and the guy that sold it on ebay does not remember the password.
I have tried multiple ways to boot it into recovery to do a hard reset:
- Volume Down + Power bottom
- Volume Up + Power Bottom
- Reset whole on the back.
BUT no recovery menu. It simply shows the funtab screen logo and then keeps booting up to the "enter password" screen.
There is got to be a way to recover from a forgotten password lock.
Any help is greatly appreciated.

Found it!
I was able to reset my funtab, after hours of searching and messing around with it. Never did find a real solution on the web, I stumbled upon this method just by messing around:
When the device boots up and is on the screen where you swipe your finger across the screen to unlock it, press in the bottom right corner to reveal the time and wifi status. Click on it again, it will reveal a larger menu with settings on the bottom. Click settings, the menu will disappear and it will look like nothing happened. Swipe your finger across the screen to unlock it and VOILA! the setting screen appears before you, scroll down to backup and reset ect. etc. you know the drill. Factory reset!
This may work for other challenging locked devices, let me know if it works for you.
T-

como resetear tablet fun tab 7.0
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.

aparicio70 said:
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.
Click to expand...
Click to collapse
No hablo Español.
May be in ENGLISH ?

LS.xD said:
No hablo Español.
May be in ENGLISH ?
Click to expand...
Click to collapse
a you not spoken inglish taks broher

aparicio70 said:
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.
Click to expand...
Click to collapse
Just translated it:
hello friends and greetings ,
I want to say to them that I am new in this forum and my question is: I have a tablet fun tab 7.0 which my daughter set a password for and forgot it. Thats why we cannot use it. Does anybody knows about how to unblock it?
I would be very grateful for it.
PLS can anyone translate the solution to Espanol?
"When the device boots up and is on the screen where you swipe your finger across the screen to unlock it, press in the bottom right corner to reveal the time and wifi status. Click on it again, it will reveal a larger menu with settings on the bottom. Click settings, the menu will disappear and it will look like nothing happened. Swipe your finger across the screen to unlock it and VOILA! the setting screen appears before you, scroll down to backup and reset ect. etc. you know the drill. Factory reset!"
---------- Post added at 02:15 AM ---------- Previous post was at 01:27 AM ----------
aparicio70 said:
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.
Click to expand...
Click to collapse
-->
"Cuando el dispositivo arranca y está en la pantalla en la que pasar el dedo por la pantalla para desbloquearlo, presione en la esquina inferior derecha para mostrar la hora y el estado wifi. Haga clic en él de nuevo, se mostrará un menú grande con configuración de la parte inferior. Haga clic en configuración, el menú desaparecerá y se verá. Pase el dedo por la pantalla para desbloquearla y ¡voilá! Aparece la pantalla de ajuste. Desplácese hacia abajo para copias de seguridad y restablecer etcétera."

LS.xD said:
Just translated it:
hello friends and greetings ,
I want to say to them that I am new in this forum and my question is: I have a tablet fun tab 7.0 which my daughter set a password for and forgot it. Thats why we cannot use it. Does anybody knows about how to unblock it?
I would be very grateful for it.
PLS can anyone translate the solution to Espanol?
"When the device boots up and is on the screen where you swipe your finger across the screen to unlock it, press in the bottom right corner to reveal the time and wifi status. Click on it again, it will reveal a larger menu with settings on the bottom. Click settings, the menu will disappear and it will look like nothing happened. Swipe your finger across the screen to unlock it and VOILA! the setting screen appears before you, scroll down to backup and reset ect. etc. you know the drill. Factory reset!"
---------- Post added at 02:15 AM ---------- Previous post was at 01:27 AM ----------
-->
"Cuando el dispositivo arranca y está en la pantalla en la que pasar el dedo por la pantalla para desbloquearlo, presione en la esquina inferior derecha para mostrar la hora y el estado wifi. Haga clic en él de nuevo, se mostrará un menú grande con configuración de la parte inferior. Haga clic en configuración, el menú desaparecerá y se verá. Pase el dedo por la pantalla para desbloquearla y ¡voilá! Aparece la pantalla de ajuste. Desplácese hacia abajo para copias de seguridad y restablecer etcétera."
Click to expand...
Click to collapse
thanks friends
ya lo hice pero no he podido desbloquearla alguien sabe otra manera de como quitar el password de patron?

I am also not loaded tablet!
ler123 said:
I bought this tablet on ebay for my daughter. But It came password locked and the guy that sold it on ebay does not remember the password.
I have tried multiple ways to boot it into recovery to do a hard reset:
- Volume Down + Power bottom
- Volume Up + Power Bottom
- Reset whole on the back.
BUT no recovery menu. It simply shows the funtab screen logo and then keeps booting up to the "enter password" screen.
There is got to be a way to recover from a forgotten password lock.
Any help is greatly appreciated.
Click to expand...
Click to collapse
I have exactly the tablet FTABCP - freeze on the splash screen with Android and all. Can't do a hard reset is no combination of keys does not help. How do You cope with this? Please help!

Ematic funtab FTABC Hard Reset Solución
solucion para la tablet funtab
dejar que encienda
conectar usb a la pc
ROOT_v5
ejecutar root.bat
seguir pasos hasta que la pantalla que negra
de hay ejecutar
Uni-Android Tool V-4.0
opcion 5 (hard reset )
y listo
recordad que todo este proceso es por ADB
asi que instalar los controladores de ADB.
disculpen por ser tan breve ya que es mi primer post
realmente me costo encontrar solución a este problema
así que espero y les sirva.

I just wanted to say thank you for this thread. I tried your procedure, but I couldn't get the full settings to show up. "Zoodles" kept taking up the whole screen, and I didn't know the PIN to exit it (I bought the funtab used).
But, I did find another way to get to the settings. I plugged the Funtab into my computer via USB. When the Funtab booted up, it brought up a screen asking if I wanted to enable USB file transfer. From this screen, I could click on the time and bring up the full settings menu, which had the factory reset option.
I realize this thread's a couple of years old, but if I found it by googling, maybe the next person will too. Good luck!

Thanks a lot!
TBEtbeTBE said:
I just wanted to say thank you for this thread. I tried your procedure, but I couldn't get the full settings to show up. "Zoodles" kept taking up the whole screen, and I didn't know the PIN to exit it (I bought the funtab used).
But, I did find another way to get to the settings. I plugged the Funtab into my computer via USB. When the Funtab booted up, it brought up a screen asking if I wanted to enable USB file transfer. From this screen, I could click on the time and bring up the full settings menu, which had the factory reset option.
I realize this thread's a couple of years old, but if I found it by googling, maybe the next person will too. Good luck!
Click to expand...
Click to collapse
@TBEtbeTBE: thank you very much for your post! It's never too late to share knowledge, and your message saved me from hours of pain! Thanks!!!

I,m trying to do a factory reset but it only show sigh with your google account. Its for a frien and he dont remember the email or pass for the account. Thanks.

How can I reset my fun tab my son change the pass code and now he has forgot it

[Update] OEM

Hi!
Well, i've a samsung J400M with android 8.0 and i want to root it. The problem is that the oem option doesn't appears.
I waited +190 hrs and nothing, also tried to change the date and reboot
Any other ideas?

Merxury29 said:
Hi!
Well, i've a samsung J400M and i want to root it. The problem is that the oem option doesn't appears.
I waited +190 hrs and nothing, also tried to change the date and reboot
Any other ideas?
Click to expand...
Click to collapse
Hi, so i made a research (a very deep one) and compare my cellphone with another J4.
The result is that my mobile dosen't show the option, but the other does, hence, it's looks like the problem is with my mobile.

Merxury29 said:
Hi!
Well, i've a samsung J400M and i want to root it. The problem is that the oem option doesn't appears.
I waited +190 hrs and nothing, also tried to change the date and reboot
Any other ideas?
Click to expand...
Click to collapse
So, the reality is that samsung won't put the option anymore. I don't know if this is the future of all samsung's models.
Plus, i haven't found a method to root my phone like this :crying:

Que pasa con el J400M
Alguien me puede dar luces,sobre el j400m o F aparte que ponen j4 y no especifican bien ,luego al final del post,salen con el signo mas,llevo meses tratando de encontrar ,algo para este movil,alguna rom gsi o aosp,las hay pero nadie explica bien como instalar,es muy malo el aparato,es muy seguro la verdad que no entiendo j2j3j5j6j7j8 y el 4 ????????? el j400M tiene soporte treble con una sola Ranura,he bajado todas las rom y ninguna funciona ,que ondaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa....

Surface pro 5 1796 touchscreen and battery problem.

Has anyone managed to fix the problem of no touchscreen and battery after updating firmware?
I have tried everything from trying to use Linux - fwupdmgr to replacing the Winbond bios chip on the motherboard
The touch firmware will not install. It shows on screen during boot up:
Please wait We are installing a system update
(Twice but no progress bar)
Then in device manager it says device couldn’t start code 10 - attempt to change attributes to memory that has not been committed.
Status attempted 0xc000002D
(Which I believe is access denied)
I really need someone expert help in this matter.

Hi.
I have the Surface Pro 6 too. Touch does not work even in bios uefi. It's not a hardware issue. I think it's from the bios. Is it possible to go back to the first version in Bios Uefi? Did you solve your problem?

Hi
No didn’t solve it yet. But I believe it’s not possible to go back as the firmware isn’t available on Microsoft website anymore.
Does your battery still work as mine turns off as soon as you disconnect adapter.
I have even changed the bios chip with a brand new one and it still didn’t work!
Where are you based?

Sdpuk2020 said:
Hola
No, aún no lo resolvió. Pero creo que no es posible volver atrás, ya que el firmware ya no está disponible en el sitio web de Microsoft.
¿La batería sigue funcionando cuando la mía se apaga tan pronto como desconecta el adaptador?
¡Incluso he cambiado el chip bios por uno nuevo y todavía no funcionó!
¿Dónde se encuentra?
Click to expand...
Click to collapse
investigando mucho en otros foros, descubrí que alguien logró resolverlo reprogramando el chip biosonda.
Hay ocasiones, que ni siquiera cambiando el chip, puedes solucionarlo, porque en las instrucciones internas, la pantalla táctil está desactivada.
Todos los problemas provienen de que el "ME" (Intel® Management Engine) está dañado o algunas opciones están deshabilitadas.
Se necesita un reprogramador de bios.
¿tienes que intentarlo?
Sry. Google translator

Question Problems with VolTe and Fingerprint Reader, not working even when changing regions

Good afternoon! Greetings from Mexico! A few days ago I bought a Realme GT Neo 2, I currently live in Mexico and use a company called "Bait" from Altan Redes (which uses band 28), this information will help me to explain and comment on a question that I have AND I CANNOT SOLVE.
According to the Realme website, my phone is the "realme GT NeoFR(12+256)" version; what I suppose is from France and therefore a version of Europe, so far everything is fine, right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, not because according to the manufacturer's specifications, this super cell phone supports VolTE and supports band 28; when inserting the sim that I have in a OnePlus 5 from the Mexican company Bait with the hope that the VolTE will be activated and I can receive calls or dial, something that for 10 days I tried in a thousand ways and I could never activate said service, call operated and they told me the following "Your equipment is not approved to work with our network" pfffffff!!, and it is curious that said activation option does not appear in the settings.
How do I "half" solve this problem, since it is a dual sim, buy and enter another "BAIT" sim with activated data and use my previous "BAIT" sim, degrading the signal to 2g so that calls can come in and out.
So far I would like to know if anyone has a solution to this problem or has had the same problem that I face.
After reading here on XDA I did the following:
Firstly, the equipment came with the firmware RMX3370_11_A.03; and when reading in detail in the forum I realized that if we use a VPN it is likely that it will release an update to be able to unlock the bootloader and be able to flash the phone and change the region (with this flashing I thought that it could activate the volte or some functions different to be able to use my phone with the "BAIT" operator).
For this first Update I used the psiphon Pro application and the country of France.
https://psiphon.ca/es/download.html
After trying a vpn and a lot of patience the phone first received the RMX3370_11_A.05 update.
After a few days I kept trying to upload the version of the phone and simply with the vpn for hours and connected to WIFI I did not receive anything, that is why I thought what if I change the country when using the VPN? and bingo I was able to update to the RMX3370_11_A.06 version for this case I used the same application but using the vpn of the country of Bulgaria.
With this update it was first possible for me to unlock the booloader following in detail the tutorial of the brother @RMX3370 (thanks for the tutorials)
https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489
Once the bootloader is unlocked install TWRP and Magisk to root the phone; again following in detail the tutorial of the brother @RMX3370
https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/
After this process and with the unlocked bootloader flashie and change regions through Europe, India Latam etc.... NOTHING OR ANY version of firmware activated the VolTE.
For flashing, follow in detail the following tutorial from brother @SrCDA:
https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/
All this process BooLoader unlocking, flashing, firmware installation (region changes) was done under MacOS BigSur without problems; That's why I tell you to follow all the guides in detail since I see that sometimes they ask many things recursively when the same authors of the guides solve them in the publications.
After trying and trying to get the VolTE to work I have resigned myself to staying in the INDIA region and I am already using the phone for daily use; only now there is another problem THE FINGERPRINT READER DOES NOT WORK, I have tried to put my fingerprints and it is really annoying to unlock it with a code; I have disabled magisk's biometric authentication BUT IT HAS NOT SOLVED ANYTHING.
I've changed the android calling app to avoid the "This call is being recorded" announcement, and uninstalled apps that slow down the phone to leave the stock rom as clean as possible.
It is a fast phone, well configured and I really like it; but I list my problems again:
- There is no VolTE for band 28 of Mexico
- Issue with fingerprint reader shaking when trying to add them to unlock the phone.
Note: if any user requires that I support him in something with all pleasure!; If anyone can ask for my listed problems or faced the same thing and managed to fix them, I would really appreciate some tips to finish configuring my phone!
Thank you very much for reading and for your kind attention, greetings from Mexico!

makuaz said:
Good afternoon! Greetings from Mexico! A few days ago I bought a Realme GT Neo 2, I currently live in Mexico and use a company called "Bait" from Altan Redes (which uses band 28), this information will help me to explain and comment on a question that I have AND I CANNOT SOLVE.
According to the Realme website, my phone is the "realme GT NeoFR(12+256)" version; what I suppose is from France and therefore a version of Europe, so far everything is fine, right?
View attachment 5537279
Well, not because according to the manufacturer's specifications, this super cell phone supports VolTE and supports band 28; when inserting the sim that I have in a OnePlus 5 from the Mexican company Bait with the hope that the VolTE will be activated and I can receive calls or dial, something that for 10 days I tried in a thousand ways and I could never activate said service, call operated and they told me the following "Your equipment is not approved to work with our network" pfffffff!!, and it is curious that said activation option does not appear in the settings.
View attachment 5537291
View attachment 5537281
View attachment 5537283
View attachment 5537285
How do I "half" solve this problem, since it is a dual sim, buy and enter another "BAIT" sim with activated data and use my previous "BAIT" sim, degrading the signal to 2g so that calls can come in and out.
View attachment 5537289
So far I would like to know if anyone has a solution to this problem or has had the same problem that I face.
After reading here on XDA I did the following:
Firstly, the equipment came with the firmware RMX3370_11_A.03; and when reading in detail in the forum I realized that if we use a VPN it is likely that it will release an update to be able to unlock the bootloader and be able to flash the phone and change the region (with this flashing I thought that it could activate the volte or some functions different to be able to use my phone with the "BAIT" operator).
For this first Update I used the psiphon Pro application and the country of France.
View attachment 5537293
https://psiphon.ca/es/download.html
After trying a vpn and a lot of patience the phone first received the RMX3370_11_A.05 update.
After a few days I kept trying to upload the version of the phone and simply with the vpn for hours and connected to WIFI I did not receive anything, that is why I thought what if I change the country when using the VPN? and bingo I was able to update to the RMX3370_11_A.06 version for this case I used the same application but using the vpn of the country of Bulgaria.
With this update it was first possible for me to unlock the booloader following in detail the tutorial of the brother @RMX3370 (thanks for the tutorials)
https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489
Once the bootloader is unlocked install TWRP and Magisk to root the phone; again following in detail the tutorial of the brother @RMX3370
https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/
After this process and with the unlocked bootloader flashie and change regions through Europe, India Latam etc.... NOTHING OR ANY version of firmware activated the VolTE.
For flashing, follow in detail the following tutorial from brother @SrCDA:
https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/
All this process BooLoader unlocking, flashing, firmware installation (region changes) was done under MacOS BigSur without problems; That's why I tell you to follow all the guides in detail since I see that sometimes they ask many things recursively when the same authors of the guides solve them in the publications.
After trying and trying to get the VolTE to work I have resigned myself to staying in the INDIA region and I am already using the phone for daily use; only now there is another problem THE FINGERPRINT READER DOES NOT WORK, I have tried to put my fingerprints and it is really annoying to unlock it with a code; I have disabled magisk's biometric authentication BUT IT HAS NOT SOLVED ANYTHING.
I've changed the android calling app to avoid the "This call is being recorded" announcement, and uninstalled apps that slow down the phone to leave the stock rom as clean as possible.
It is a fast phone, well configured and I really like it; but I list my problems again:
- There is no VolTE for band 28 of Mexico
- Issue with fingerprint reader shaking when trying to add them to unlock the phone.
Note: if any user requires that I support him in something with all pleasure!; If anyone can ask for my listed problems or faced the same thing and managed to fix them, I would really appreciate some tips to finish configuring my phone!
View attachment 5537299
Thank you very much for reading and for your kind attention, greetings from Mexico!
Click to expand...
Click to collapse
Hello, facing same issue, no VOLTE in settings, tried flash europe and china roms, VOLTE still not there, so you are not only one

joksax said:
Hello, facing same issue, no VOLTE in settings, tried flash europe and china roms, VOLTE still not there, so you are not only one
Click to expand...
Click to collapse
hello! Good morning, greetings from Mexico, it's good to know that at least I'm not the only one with the problem of activating VolTE, thanks for responding, comrade! Hey can I ask you if you have problems with fingerprint unlocking?

makuaz said:
hello! Good morning, greetings from Mexico, it's good to know that at least I'm not the only one with the problem of activating VolTE, thanks for responding, comrade! Hey can I ask you if you have problems with fingerprint unlocking?
Click to expand...
Click to collapse
nope, fingerprint unlocking works perfectly for me

mine also came with the version rmx3370_11_a.03 I'm trying to update but I can't, even with vpn and changing regions I can't, is there anything else I can do? I couldn't find it in the Ota file to install

Arkynne said:
mine also came with the version rmx3370_11_a.03 I'm trying to update but I can't, even with vpn and changing regions I can't, is there anything else I can do? I couldn't find it in the Ota file to install
Click to expand...
Click to collapse
rmx3370_11_a.03 ? Where did you buy your GT Neo2 from ?

axialcecal said:
rmx3370_11_a.03 ? Where did you buy your GT Neo2 from ?
Click to expand...
Click to collapse
I live in Brazil, so I imported through Aliexpress

Arkynne said:
I live in Brazil, so I imported through Aliexpress
Click to expand...
Click to collapse
Ah yes, Aliexpress, that explains the strange version it came with -- Is there no way to flash a.06 using EDL?

axialcecal said:
Ah yes, Aliexpress, that explains the strange version it came with -- Is there no way to flash a.06 using EDL?
Click to expand...
Click to collapse
I already did a search, I found the version rmx3370_11_a.06, but the instructions themselves I didn't understand very well. I tried to do it in OTA, but I couldn't find the file. I can even try to do it in EDL, but this is not considered root? Apart from that I came to look for update patches after the wi-fi gives problems of not finding the network, being that other cell phones are connected to the wifi network

Arkynne said:
I already did a search, I found the version rmx3370_11_a.06, but the instructions themselves I didn't understand very well. I tried to do it in OTA, but I couldn't find the file. I can even try to do it in EDL, but this is not considered root? Apart from that I came to look for update patches after the wi-fi gives problems of not finding the network, being that other cell phones are connected to the wifi network
Click to expand...
Click to collapse
I just got the phone myself so I haven't started with modifications or unlocking bootloader but considering its a SD 870 I would assume it might be similar to a Oneplus 7 Pro EDL procedure which requires a different button combo and different USB drivers from Qualcomm. The page I found here seems to show similar steps https://realmefirmware.com/how-to-flash/ and the download for global a.06 and india 1.07 [https://realmefirmware.com/realme-gt-neo2-5g-firmware/]
But I won't be doing that yet but from my own experiences on other phones it looks like the right path. Lots of people in other threads are mentioning inconsistent functionality so there might be more to it too. I guess it might be beneficial to keep watching and waiting.
My phone is from Banggood I'm on a.06 from purchase. I am in Australia.

I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced

Arkynne said:
I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced
Click to expand...
Click to collapse
Even a Poco F3 has a similar method, however instead of Qualcomm EDL Mode, it uses a similar but branded Xiaomi tool and within Fastboot Mode to flash the device.
I'll be reading up on Stock flash methods for myself before I get to a stage where I unlock bootloader and root.

axialcecal said:
Even a Poco F3 has a similar method, however instead of Qualcomm EDL Mode, it uses a similar but branded Xiaomi tool and within Fastboot Mode to flash the device.
I'll be reading up on Stock flash methods for myself before I get to a stage where I unlock bootloader and root.
Click to expand...
Click to collapse
I researched, I really saw that it is a tool for xiaomi, the same and for realme/oppo, can you give me a contact so we can talk better? like telegram?

Arkynne said:
I researched, I really saw that it is a tool for xiaomi, the same and for realme/oppo, can you give me a contact so we can talk better? like telegram?
Click to expand...
Click to collapse
Wouldn't be the same no, as Xiaomi's tool only supports a fastboot type package.
PM Sent

Hi, I bought this phone 3 days ago (with no volte option) and Im also with BAIT. The thing I did is to download Vozapp, so far I can receive phone calls without any issue. When the phone stay along time without usage (like going bed) you may need to wake it up again (just double tap to wake the screen) so the app resume receiving calls.

makuaz said:
¡Buena tarde! ¡Saludos desde México! Hace unos dias compre un Realme GT Neo 2, actualmente vivo en Mexico y uso una empresa que se llama "Bait" de Altan Redes (que usa la banda 28), esta informacion me ayudara a explicar y comentar una duda que tengo Y NO PUEDO RESOLVER.
Según el sitio web de Realme, mi teléfono es la versión "realme GT NeoFR (12+256)"; lo que supongo es de francia y por lo tanto una version de europa, hasta aqui todo bien no?
View attachment 5537279
Pues no porque según las especificaciones del fabricante, este súper celular soporta VolTE y soporta banda 28; al insertar la sim que tengo en un OnePlus 5 de la empresa mexicana Bait con la esperanza de que se active el VolTE y pueda recibir llamadas o marcar, algo que durante 10 días probé de mil maneras y nunca pude activar dijo servicio, llame operado y me dijeron lo siguiente "Tu equipo no esta homologado para trabajar con nuestra red" pfffffff!!, y es curioso que en los ajustes no aparece dicha opcion de activacion.
View attachment 5537291
View attachment 5537281
View attachment 5537283
View attachment 5537285
Como soluciono "a medias" este problema, ya que es dual sim, compro e ingreso otra sim "BAIT" con datos activados y uso mi anterior sim "BAIT", degradando la señal a 2g para que puedan entrar y salir llamadas .
View attachment 5537289
Hasta el momento me gustaria saber si alguien tiene solucion a este problema o ha tenido el mismo problema que yo enfrento.
Después de leer aquí en XDA hice lo siguiente:
En primer lugar, el equipo venía con el firmware RMX3370_11_A.03; y al leer en detalle en el foro me di cuenta que si usamos VPN es probable que lance una actualización para poder desbloquear el bootloader y poder flashear el teléfono y cambiar de región (con este flasheo pensé que podría activar el volte o algunas funciones diferentes para poder usar mi teléfono con el operador "BAIT").
Para esta primera actualización utilicé la aplicación psiphon Pro y el país de Francia.
View attachment 5537293
https://psiphon.ca/es/download.html
Después de probar una vpn y mucha paciencia, el teléfono recibió por primera vez la actualización RMX3370_11_A.05.
Después de unos días seguí intentando subir la versión del teléfono y simplemente con el vpn durante horas y conectado a WIFI no recibí nada, por eso pensé ¿y si cambio de país al usar el VPN? y bingo pude actualizar a la versión RMX3370_11_A.06 para este caso usé la misma aplicación pero usando el vpn del país de Bulgaria.
Con esta actualización primero me fue posible desbloquear el booloader siguiendo en detalle el tutorial del hermano @RMX3370 (gracias por los tutoriales)
https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489
Una vez que el cargador de arranque esté desbloqueado, instale TWRP y Magisk para rootear el teléfono; nuevamente siguiendo en detalle el tutorial del hermano @RMX3370
https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/
Despues de este proceso y con el bootloader desbloqueado flashie y cambio de regiones por Europa, India Latam etc.... NADA NI NINGUNA version de firmware activaba el VolTE.
Para flashear, siga en detalle el siguiente tutorial del hermano @SrCDA :
https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/
Todo este proceso de desbloqueo, flasheo, instalación de firmware (cambios de región) de BooLoader se realizó bajo MacOS BigSur sin problemas; Por eso les digo que sigan todas las guías al detalle ya que veo que a veces preguntan muchas cosas recursivamente cuando los mismos autores de las guías las resuelven en las publicaciones.
Después de intentar e intentar que funcione el VolTE me he resignado a quedarme en la región INDIA y ya estoy usando el teléfono para uso diario; solo que ahora hay otro problema EL LECTOR DE HUELLAS DACTILARES NO FUNCIONA, he intentado poner mis huellas dactilares y es realmente molesto desbloquearlo con un código; He desactivado la autenticación biométrica de magisk PERO NO HA SOLUCIONADO NADA.
Cambié la aplicación de llamadas de Android para evitar el anuncio "Esta llamada se está grabando" y desinstalé las aplicaciones que ralentizan el teléfono para dejar la ROM original lo más limpia posible.
Es un teléfono rápido, bien configurado y me gusta mucho; pero enumero mis problemas de nuevo:
- No hay VolTE para la banda 28 de México
- Problema con el temblor del lector de huellas dactilares al intentar agregarlas para desbloquear el teléfono.
Nota: si algún usuario requiere que lo apoye en algo con todo gusto!; Si alguien puede preguntar por los problemas enumerados o se enfrentó a lo mismo y logró solucionarlos, ¡realmente agradecería algunos consejos para terminar de configurar mi teléfono!
View attachment 5537299
Muchas gracias por leerme y por su amable atención, saludos desde México!
Click to expand...
Click to collapse
H, también soy de México y sigo con la RMX3370_11_A.03 cuál es el proceso que seguiste, cuánto tiempo usaste la vpn..? Las he usado y no descarga nada... También quiero saber dónde checaste tu versión donde dice que es de Francia...
H, I am also from Mexico and I continue with the RMX3370_11_A.03, what is the process you followed, how long did you use the vpn? I've used them and it doesn't download anything... I also want to know where you checked your version where it says it's from France...

Arkynne said:
I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced
Click to expand...
Click to collapse
As far as I know MSM is paid brother, better use the tutorial described above since I currently managed to update (first Flashing to RMX3370_11_A.07 (Indian region) and I got the RMX3370_11_A.08 update

imR1ch said:
Hi, I bought this phone 3 days ago (with no volte option) and Im also with BAIT. The thing I did is to download Vozapp, so far I can receive phone calls without any issue. When the phone stay along time without usage (like going bed) you may need to wake it up again (just double tap to wake the screen) so the app resume receiving calls.
Click to expand...
Click to collapse
ok brother I understand, I don't use voice app better buy another bait sim and with that I have activated 4G and my main sim (also bait), what I was able to investigate with a friend who works at Altan Redes IS THAT THE VOLTE FOR CALLS WILL NEVER WORK ON THIS PHONE UNTIL REALME OR ANY MEXICAN TELEPHONE COMPANY SELL IT IN THEIR OFFICIAL STORES SO THAT THE TAXES ARE PAID AND IT CAN BE APPROVED

Gamas1. said:
H, también soy de México y sigo con la RMX3370_11_A.03 cuál es el proceso que seguiste, cuánto tiempo usaste la vpn..? Las he usado y no descarga nada... También quiero saber dónde checaste tu versión donde dice que es de Francia...
Click to expand...
Click to collapse
Hello brother, a pleasure! I recommend you try to flash it yourself to upload the firmware, when my phone arrived it had the same RMX3370_11_A.03 and it uploaded by itself without vpn or anything to RMX3370_11_A.05, from there I unlocked the bootloader and I was able to flash it by trying different regions, India, CN, Global etc...

makuaz said:
ok brother I understand, I don't use voice app better buy another bait sim and with that I have activated 4G and my main sim (also bait), what I was able to investigate with a friend who works at Altan Redes IS THAT THE VOLTE FOR CALLS WILL NEVER WORK ON THIS PHONE UNTIL REALME OR ANY MEXICAN TELEPHONE COMPANY SELL IT IN THEIR OFFICIAL STORES SO THAT THE TAXES ARE PAID AND IT CAN BE APPROVED
Click to expand...
Click to collapse
Well my I can do and receive calls at any moment, you should install it and give it try. VozApp