Database Info

Problem Flashing Samsung Infuse

Hello:
First and foremost I must say that I do not know much english and non-ce write it. What I am doing is translating from Spanish to English and when I read in the forum so i translate to Spanish to be able to understand.
Well i've been reading to see if i see something of the problem i have with my Infuse and i'm trying to Flash my Infuse, but when it came to Rom Manager and then Flash ClockWorkMOD Recovery i get a phone list, but the my does not appear i chose Galaxys Samsung i9000 and i get Successfully downloaded ClockWorkMOD recovery,but alleged mind has to leave a yellow bar and do not see at any time the yellow bar.Then I went to Quick Boot and i got no reboot system now then i would like to reinstall Packages and i get error (E:Failed to verify whole-File) (E: Singnature verification failed(Installation aborted) created by what I have read here the problem is that the Android System is Recvery< 3e> and you have to be in < 2e> to enter the Clockworkmod.
Any help that I can provide is grateful in the soul.

javomarlin said:
Hello:
First and foremost I must say that I do not know much english and non-ce write it. What I am doing is translating from Spanish to English and when I read in the forum so i translate to Spanish to be able to understand.
Well i've been reading to see if i see something of the problem i have with my Infuse and i'm trying to Flash my Infuse, but when it came to Rom Manager and then Flash ClockWorkMOD Recovery i get a phone list, but the my does not appear i chose Galaxys Samsung i9000 and i get Successfully downloaded ClockWorkMOD recovery,but alleged mind has to leave a yellow bar and do not see at any time the yellow bar.Then I went to Quick Boot and i got no reboot system now then i would like to reinstall Packages and i get error (E:Failed to verify whole-File) (E: Singnature verification failed(Installation aborted) created by what I have read here the problem is that the Android System is Recvery< 3e> and you have to be in < 2e> to enter the Clockworkmod.
Any help that I can provide is grateful in the soul.
Click to expand...
Click to collapse
have you tried the one click so you can flash a rom..?
http://forum.xda-developers.com/showthread.php?t=1524081
post one gives you stock...
then post two CWM to allow you to put custom rom

bigjoe2675 said:
have you tried the one click so you can flash a rom..?
http://forum.xda-developers.com/showthread.php?t=1524081
post one gives you stock...
then post two CWM to allow you to put custom rom
Click to expand...
Click to collapse
Hello,bigjoe2675:
i haven't tried one click, i'm going to try and i'll let you know how I was ...
Thanks for the help so fast.

Hello:
Lower these programs:Heimdall One-Click Return to Stock UCLB3, Depositfiles Link#2 and here's another to try, but I would like to know if there is a written guide or a video to my phone instalarsela...
thanks.

javomarlin said:
Hello:
First and foremost I must say that I do not know much english and non-ce write it. What I am doing is translating from Spanish to English and when I read in the forum so i translate to Spanish to be able to understand.
Well i've been reading to see if i see something of the problem i have with my Infuse and i'm trying to Flash my Infuse, but when it came to Rom Manager and then Flash ClockWorkMOD Recovery i get a phone list, but the my does not appear i chose Galaxys Samsung i9000 and i get Successfully downloaded ClockWorkMOD recovery,but alleged mind has to leave a yellow bar and do not see at any time the yellow bar.Then I went to Quick Boot and i got no reboot system now then i would like to reinstall Packages and i get error (E:Failed to verify whole-File) (E: Singnature verification failed(Installation aborted) created by what I have read here the problem is that the Android System is Recvery< 3e> and you have to be in < 2e> to enter the Clockworkmod.
Any help that I can provide is grateful in the soul.
Click to expand...
Click to collapse
Saludos amigo, cuentame cual es el problema que tienes para ayudarte, esta comunidad es como una familia, aqui me han ayudado muchisimo y si puedo ser util en cualquier cosa pues lo hago con mucho gusto, espero que postees en ESPANOL....

kalebdevil said:
Saludos amigo, cuentame cual es el problema que tienes para ayudarte, esta comunidad es como una familia, aqui me han ayudado muchisimo y si puedo ser util en cualquier cosa pues lo hago con mucho gusto, espero que postees en ESPANOL....
Click to expand...
Click to collapse
Hola kalebdevil:
Ok!!! lo primero que le hice fue el Infuse Root Unlock y lo verique con el Root Check Basic para saber si estaba bien echo el Root, todo bien. Luego consegui el Rom Manager y el Quick Boot, pero cuando entro a Rom Manager
y luego a Flash ClockWorkMOD Recovery me sale una lista de telefono, y el mio no aparesio y escogí Samsung GalaxyS i9000 y me sale Successfully downloaded ClockworkMod recovery,pero supuesta mente tiene que salir una barra amarilla y no veo en ningún momento la barra amarilla. Luego fui a Quick Boot y no me salio reboot system now luego le doy a Reinstall Packages y me sale error (E:Failed to verify whole-File) (E: Singnature verification Failed)(Intallation aborted) Despue de todo esto segui buscando en internet y me encontre con un video de How to Install Clockworkmod Recovery on the Samsung Infuse 4G que lo iso nuetro conpañero qbking77,pero me confundi cuando estaba poniendole al Recovery el .orig y lo enimine despues entre a Quict Boot y luego ledi a
Reinstall Packages y me salio el erro que dije antes y como no tenia otra opcion
oprimi en Reboot System Now y se quedo en el logo de Samsung. Ya tu sabes me asuste y dije se chavo el cel, pero encontre unprograma de Odin y lo subi de nuevo y de hay en adelante no he podido flashear una Rom.
Gracias por la a Yuda

thx Kaleb, lets see if the one click will work...think i got what he was saying in his post...
ok first lets download a fresh one click, here is the one click to stock click me
ok once we have this file it is a exe file, just double click it and get it a second or two to open:
while that is going put the phone into download mode: DOWNLOAD mode: turn off phone.... open back cover, Remove battery. Press and hold both volume buttons. Plug in USB cable and then insert battery.
1. Put your phone into Download Mode. that is what we did up above.
2. If you have not used Heimdall, you will need to set up the driver for device recognition.
3. Once your device is connected, the DEVICE STATUS should show: CONNECTED. The long FLASH bar will also turn on for flashing.
4. Click on the FLASH button. (In my opinion: I recommend that you do this in a safe environment. Do not disturb your phone will flashing this firmware. Turn off Antivirus. Do not run any other programs, upload/download/youtube/burning DVD etc)
5. Once it has completed, your phone will reboot. You will hopefully see the ATT logo and reboot into STOCK UCLB3.
6. If it did not work, you will have to put it back into DOWNLOAD mode and reflash a second time, with the FLASH BOOTLOADER box checked. This is more likely if you never had proper Gingerbread bootloaders on your phone, if you are coming from FROYO or if you never had Odin a Gingerbread leak to get your bootloaders.
then once it boots...let it sit for few min....And if your gonna flash a rom I would put it on the sd card at this point...
Then now if you want put CWM on to flash a ROM,
Download this file to put CWM on it is a one click also: click me
>Put your phone back into DOWNLOAD mode after your phone has booted up.
Flash this package. It is Entropy512's DD kernel. same way you did the one click to stock....It will boot your phone completely.
------------------------------------
and below is when you want to flash a rom...but lets get the above going...
Once the phone has booted into stock ROM, use the three fingers technique to get into recovery.
Recovery Mode: Power off, hold both volume buttons and the power button at the same time. Samsung logo should come on. Let go only the power button, Keep holding the volumes buttons for 12-15 seconds and let go.
When in CWM:
I recommend the following to get the cleanest flash that has not failed me.
1. Wipe data/factory reset.
2. Wipe Cache.
3. Go to Advance: wipe dalvik cache.
4 Go back and into Mount and Storage: format system, format data, format cache.
5. Go back to main and flash your ROM.
---------------------------------------------------------
all this take from qkster thread, so give him the thanks...
http://forum.xda-developers.com/showthread.php?t=1524081

Hello, bigjoe2675:
i'm going to download and then I tell you as I was.
Once again thanks

javomarlin said:
Hello, bigjoe2675:
i'm going to download and then I tell you as I was.
Once again thanks
Click to expand...
Click to collapse
Cuentame javimarlin pudiste hacer lo que te indico bigjoe? Como te fue? Espero todo te haya salido bien, no dudes en escribirme sino entiendes algo o si necesitas ayuda, cuentame hermano de que pais eres?
Sent from my SAMSUNG-SGH-I997 using xda premium

Hello,bigjoe2675 y kalebdevil:
I would like to give you the thanks to you and all those who are in one or another way helped me to flash my phone. Good now i would like to see mediera your opinion if i can install this ROM: INFUSE 4G WITH MIUI GALNET ICS 4.0 [2.11.26 ] very fast to my phone.
Once again I am very grateful.

I would stay away from that...till you do a lil more learning...more stable rom available... kk

javomarlin said:
Hello,bigjoe2675 y kalebdevil:
I would like to give you the thanks to you and all those who are in one or another way helped me to flash my phone. Good now i would like to see mediera your opinion if i can install this ROM: INFUSE 4G WITH MIUI GALNET ICS 4.0 [2.11.26 ] very fast to my phone.
Once again I am very grateful.
Click to expand...
Click to collapse
Like at bigjoe says stay away from those roms, in my opinion star with vagabond, then you can try emancipation, and another else.... remember first to all you need to READ READ READ and then READ over and over, that's the only way to learn, and please from time to time splash some thanks....
Bigjoe sir, mission accomplished....
Sent from my SAMSUNG-SGH-I997 using xda premium

kalebdevil said:
Cuentame javimarlin pudiste hacer lo que te indico bigjoe? Como te fue? Espero todo te haya salido bien, no dudes en escribirme sino entiendes algo o si necesitas ayuda, cuentame hermano de que pais eres?
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Hola kalebdevil:
Todo me salio bien aun que cuando el el teléfono reinicio la pantalla se puso de muchos colore (Toda Distorsionada),pero hasta ahora esta bien por que no he podido jugar un poco con el, pero me gustaría instalar la Rom que dije arriva.
ps. Yo soy de Vega Baja, Puerto Rico

javomarlin said:
Hola kalebdevil:
Todo me salio bien aun que cuando el el teléfono reinicio la pantalla se puso de muchos colore (Toda Distorsionada),pero hasta ahora esta bien por que no he podido jugar un poco con el, pero me gustaría instalar la Rom que dije arriva.
ps. Yo soy de Vega Baja, Puerto Rico
Click to expand...
Click to collapse
Ok javomarlin, fijate esos colores que salen al principio se debe a que tu tlf no tiene lo bootloaders de Gingerbread, eso se soluciona muy facil, vuelve a colocar el tlf en download mode y repite todo lo que hiciste con la salvedad de que ahora una vez se reinicie el tlf lo desconectas de la pc y sin cerrar el programa marcas la casilla que dice bootloaders, espera que el tlf se reinicie, le sacas la bateria y lo vuelves a colocar en download mode, le das a flashear y voila.... ya tienes los GB bootloaders, ya con eso puedes flashear la rom que quieres inclusive esa que quieres miui.....
Yo la verdad no te la recomiendo, vas a perder ciertas funciones de tu tlf como el Bluetooh etc etc etc, esas roms no estan hechas para estos modelos y tienen muchos bugs, pero en fin tu decides cual colocar, suerte y cuentanos como te fue....
Sent from my SAMSUNG-SGH-I997 using xda premium

kalebdevil said:
Ok javomarlin, fijate esos colores que salen al principio se debe a que tu tlf no tiene lo bootloaders de Gingerbread, eso se soluciona muy facil, vuelve a colocar el tlf en download mode y repite todo lo que hiciste con la salvedad de que ahora una vez se reinicie el tlf lo desconectas de la pc y sin cerrar el programa marcas la casilla que dice bootloaders, espera que el tlf se reinicie, le sacas la bateria y lo vuelves a colocar en download mode, le das a flashear y voila.... ya tienes los GB bootloaders, ya con eso puedes flashear la rom que quieres inclusive esa que quieres miui.....
Yo la verdad no te la recomiendo, vas a perder ciertas funciones de tu tlf como el Bluetooh etc etc etc, esas roms no estan hechas para estos modelos y tienen muchos bugs, pero en fin tu decides cual colocar, suerte y cuentanos como te fue....
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Hola mi herma nito:
Gracias por la aclaración. Es que tenia un poco de dudas cuando lo estaba flasheando por que la guia que me dio bigjoe2675 yo las tengo que traducir y aveces no son muy es pacificas, pero se entiende bastante, lo voy a volver hacer y luego te dejo saber como me fue.
Me gustaría si puedes y no es molestia cual Rom tu me recomienda que este 100% funcionado y que no pierda nada como de dijiste. haaa para terminar de molestarte si me puedes ayudar con una guia para flashear la ROM o es lo mismo que hice.
Estoy muy agradecido con ustedes.

Hola
Volví a flashear el Tlf y cuando reinicio lo desconecte de la PC, pero me volvió a salir la pantalla distorsionada con muchos colores y cuando marque la casita Flash Bootloaders me salio este mensaje:
Flashing Bootloaders is Risky
If yuo are unsure this package requires bootloaders
If is best not to flash them as it can cause
perminant, irrepairable damage to your unit.
By selecting Yes, you understand that you are flashing at you own risk
Y no me atrevi a Flashear el telefono. espero ha que me digas que hacer.

I want to thank kalebdevil, bigjoe2675 and qbking77 you for helping me and remove a little of your valuable time, and explain to flash my phone. With your help achieve,but I am leaving an authentication error of Google Talk, and another that says that I have lost the data and is not that beached is,but now I am not bothering you or wasting our time with the phone, after that you can make calls and test with the other thing is the additional.
javomarlin

javomarlin said:
I want to thank kalebdevil, bigjoe2675 and qbking77 you for helping me and remove a little of your valuable time, and explain to flash my phone. With your help achieve,but I am leaving an authentication error of Google Talk, and another that says that I have lost the data and is not that beached is,but now I am not bothering you or wasting our time with the phone, after that you can make calls and test with the other thing is the additional.
javomarlin
Click to expand...
Click to collapse
google talk error:
go to Settings/application
clear out the google frameworks data and cache
clear out the google talk data and cache
reboot
re-sync

qkster said:
google talk error:
go to Settings/application
clear out the google frameworks data and cache
clear out the google talk data and cache
reboot
re-sync
Click to expand...
Click to collapse
Ok!!! thank you for the information.

bigjoe2675 said:
have you tried the one click so you can flash a rom..?
http://forum.xda-developers.com/showthread.php?t=1524081
post one gives you stock...
then post two CWM to allow you to put custom rom
Click to expand...
Click to collapse
Hello:
after i do the Stock One Click lost the Root that had, I can return to the root.
Thank you very much.

[Q] How hard reset ematic funtab 7" FTABCP

I bought this tablet on ebay for my daughter. But It came password locked and the guy that sold it on ebay does not remember the password.
I have tried multiple ways to boot it into recovery to do a hard reset:
- Volume Down + Power bottom
- Volume Up + Power Bottom
- Reset whole on the back.
BUT no recovery menu. It simply shows the funtab screen logo and then keeps booting up to the "enter password" screen.
There is got to be a way to recover from a forgotten password lock.
Any help is greatly appreciated.

Found it!
I was able to reset my funtab, after hours of searching and messing around with it. Never did find a real solution on the web, I stumbled upon this method just by messing around:
When the device boots up and is on the screen where you swipe your finger across the screen to unlock it, press in the bottom right corner to reveal the time and wifi status. Click on it again, it will reveal a larger menu with settings on the bottom. Click settings, the menu will disappear and it will look like nothing happened. Swipe your finger across the screen to unlock it and VOILA! the setting screen appears before you, scroll down to backup and reset ect. etc. you know the drill. Factory reset!
This may work for other challenging locked devices, let me know if it works for you.
T-

como resetear tablet fun tab 7.0
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.

aparicio70 said:
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.
Click to expand...
Click to collapse
No hablo Español.
May be in ENGLISH ?

LS.xD said:
No hablo Español.
May be in ENGLISH ?
Click to expand...
Click to collapse
a you not spoken inglish taks broher

aparicio70 said:
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.
Click to expand...
Click to collapse
Just translated it:
hello friends and greetings ,
I want to say to them that I am new in this forum and my question is: I have a tablet fun tab 7.0 which my daughter set a password for and forgot it. Thats why we cannot use it. Does anybody knows about how to unblock it?
I would be very grateful for it.
PLS can anyone translate the solution to Espanol?
"When the device boots up and is on the screen where you swipe your finger across the screen to unlock it, press in the bottom right corner to reveal the time and wifi status. Click on it again, it will reveal a larger menu with settings on the bottom. Click settings, the menu will disappear and it will look like nothing happened. Swipe your finger across the screen to unlock it and VOILA! the setting screen appears before you, scroll down to backup and reset ect. etc. you know the drill. Factory reset!"
---------- Post added at 02:15 AM ---------- Previous post was at 01:27 AM ----------
aparicio70 said:
hola amigos como están saludos, quiero decirles que soy nuevo en este foro mi pregunta es que tengo una tablet fun tab 7.0 lo cual mi hija le puso una contraseña de patrón y se le olvido lo cual no podemos usarla si alguien sabe de como desbloquearla se lo agradecería mucho.
Click to expand...
Click to collapse
-->
"Cuando el dispositivo arranca y está en la pantalla en la que pasar el dedo por la pantalla para desbloquearlo, presione en la esquina inferior derecha para mostrar la hora y el estado wifi. Haga clic en él de nuevo, se mostrará un menú grande con configuración de la parte inferior. Haga clic en configuración, el menú desaparecerá y se verá. Pase el dedo por la pantalla para desbloquearla y ¡voilá! Aparece la pantalla de ajuste. Desplácese hacia abajo para copias de seguridad y restablecer etcétera."

LS.xD said:
Just translated it:
hello friends and greetings ,
I want to say to them that I am new in this forum and my question is: I have a tablet fun tab 7.0 which my daughter set a password for and forgot it. Thats why we cannot use it. Does anybody knows about how to unblock it?
I would be very grateful for it.
PLS can anyone translate the solution to Espanol?
"When the device boots up and is on the screen where you swipe your finger across the screen to unlock it, press in the bottom right corner to reveal the time and wifi status. Click on it again, it will reveal a larger menu with settings on the bottom. Click settings, the menu will disappear and it will look like nothing happened. Swipe your finger across the screen to unlock it and VOILA! the setting screen appears before you, scroll down to backup and reset ect. etc. you know the drill. Factory reset!"
---------- Post added at 02:15 AM ---------- Previous post was at 01:27 AM ----------
-->
"Cuando el dispositivo arranca y está en la pantalla en la que pasar el dedo por la pantalla para desbloquearlo, presione en la esquina inferior derecha para mostrar la hora y el estado wifi. Haga clic en él de nuevo, se mostrará un menú grande con configuración de la parte inferior. Haga clic en configuración, el menú desaparecerá y se verá. Pase el dedo por la pantalla para desbloquearla y ¡voilá! Aparece la pantalla de ajuste. Desplácese hacia abajo para copias de seguridad y restablecer etcétera."
Click to expand...
Click to collapse
thanks friends
ya lo hice pero no he podido desbloquearla alguien sabe otra manera de como quitar el password de patron?

I am also not loaded tablet!
ler123 said:
I bought this tablet on ebay for my daughter. But It came password locked and the guy that sold it on ebay does not remember the password.
I have tried multiple ways to boot it into recovery to do a hard reset:
- Volume Down + Power bottom
- Volume Up + Power Bottom
- Reset whole on the back.
BUT no recovery menu. It simply shows the funtab screen logo and then keeps booting up to the "enter password" screen.
There is got to be a way to recover from a forgotten password lock.
Any help is greatly appreciated.
Click to expand...
Click to collapse
I have exactly the tablet FTABCP - freeze on the splash screen with Android and all. Can't do a hard reset is no combination of keys does not help. How do You cope with this? Please help!

Ematic funtab FTABC Hard Reset Solución
solucion para la tablet funtab
dejar que encienda
conectar usb a la pc
ROOT_v5
ejecutar root.bat
seguir pasos hasta que la pantalla que negra
de hay ejecutar
Uni-Android Tool V-4.0
opcion 5 (hard reset )
y listo
recordad que todo este proceso es por ADB
asi que instalar los controladores de ADB.
disculpen por ser tan breve ya que es mi primer post
realmente me costo encontrar solución a este problema
así que espero y les sirva.

I just wanted to say thank you for this thread. I tried your procedure, but I couldn't get the full settings to show up. "Zoodles" kept taking up the whole screen, and I didn't know the PIN to exit it (I bought the funtab used).
But, I did find another way to get to the settings. I plugged the Funtab into my computer via USB. When the Funtab booted up, it brought up a screen asking if I wanted to enable USB file transfer. From this screen, I could click on the time and bring up the full settings menu, which had the factory reset option.
I realize this thread's a couple of years old, but if I found it by googling, maybe the next person will too. Good luck!

Thanks a lot!
TBEtbeTBE said:
I just wanted to say thank you for this thread. I tried your procedure, but I couldn't get the full settings to show up. "Zoodles" kept taking up the whole screen, and I didn't know the PIN to exit it (I bought the funtab used).
But, I did find another way to get to the settings. I plugged the Funtab into my computer via USB. When the Funtab booted up, it brought up a screen asking if I wanted to enable USB file transfer. From this screen, I could click on the time and bring up the full settings menu, which had the factory reset option.
I realize this thread's a couple of years old, but if I found it by googling, maybe the next person will too. Good luck!
Click to expand...
Click to collapse
@TBEtbeTBE: thank you very much for your post! It's never too late to share knowledge, and your message saved me from hours of pain! Thanks!!!

I,m trying to do a factory reset but it only show sigh with your google account. Its for a frien and he dont remember the email or pass for the account. Thanks.

How can I reset my fun tab my son change the pass code and now he has forgot it

Did anyone try PPIS29.65-24-2 from lolinet?

mirrors.lolinet.com offers firmware for the Moto G8 Plus.
I have a XT2019-1 on reteu. Did anyone try this with XT2019-1_DOHA_RETEU_9.0_PPI29.65-51_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip ?
My phone says it is on PPIS29.65-24-2. What does the missing S in PPI29.65-51 mean?

Me

Mounib BOULAABI said:
Me
Click to expand...
Click to collapse
Me ... and?

bornheim2 said:
Me ... and?
Click to expand...
Click to collapse
It's just a security update. Nothing new ... I am very disappointed with the lack of follow-up from Motorola. Still no Android 10 while Google phones already benefit from the first developer version of Android 11

I Tried it. No problems..
Hi.
I have tried the 29.65.51 from lolinet. It works fine.. Phone Moto G8. XT2019-1.
Flashed with fastboot.
I also have bricked my phone 3-4 times, and found how to recover by using blankflash found on lolinet.
There was a little fiddling to get it work..

Check HTML Code
What Name said:
Hi.
I have tried the 29.65.51 from lolinet. It works fine.. Phone Moto G8. XT2019-1.
Flashed with fastboot.
I also have bricked my phone 3-4 times, and found how to recover by using blankflash found on lolinet.
There was a little fiddling to get it work..
Click to expand...
Click to collapse
Shure works fine and you brick your phone because not write the correct code in fastboot terminal.
You need read the code in the firmware packet and translate the correct code in the terminal.
I use blocnote in windows to write the correct code an copy/paste in fastboot terminal and no brick for the moment.

hola tengo el moto g8 plus xt2019-2 y luego de la ultima actualizacion de seguridad automatico, el teléfono comenzó a funcionar mal, la linterna funcionaba intermitente, no se activaba turbo power con el cargador, cuando lo reinicio deja de funcionar el touch y ahora se quedo en "fastboot flash mode" y no arranca el sistema y tampoco funcionan las opciones de este menu, solo se reinicia en "fastboot flash mode". El PC no lo detecta y adb tampoco. Ya instale todos los drivers adb y motorola. Que mas puedo hacer?

Trata esto.
Axelruben said:
hola tengo el moto g8 plus xt2019-2 y luego de la ultima actualizacion de seguridad automatico, el teléfono comenzó a funcionar mal, la linterna funcionaba intermitente, no se activaba turbo power con el cargador, cuando lo reinicio deja de funcionar el touch y ahora se quedo en "fastboot flash mode" y no arranca el sistema y tampoco funcionan las opciones de este menu, solo se reinicia en "fastboot flash mode". El PC no lo detecta y adb tampoco. Ya instale todos los drivers adb y motorola. Que mas puedo hacer?
Click to expand...
Click to collapse
Si no lo detecta adb o fastboot es porque en el celular no está activada la depuración USB y para eso necesitas que inicie, ya intentaste hacer hardreset eso debería funcionar si no vas a tener que llevarlo a garantía porque por el momento no hay box para ese teléfono.

samsung a10s / sm-a107m

Hello good night I'm having a problem with my samsung a10s cell phone, the same was done to download a custom room, but the same brick in a way that does not even enter in download mode, is practically dead, I thought about doing an up on flash it but I would need the file to do this, someone there could help me. already tried everything or return to stock rom not da. it doesn't light up the screen or anything. the only signal that is and a connection on the computer that lasts + or - 3 seconds, and then disconnects showing only on the device mk65xx mediatek i don't know what it ... help me please, if possible the stock room files to use in flashtool , it would be excellent because it already has what I need too if someone has and can share or assemble my version and android 10 q binary 5.
I look forward to returning.

TrebleGSI - Browse Files at SourceForge.net
sourceforge.net
Click to expand...
Click to collapse
try that link there are gsi roms for your device
I had the same problem on that same device and the flashtool I don't recognize it but a program called chimera tool is for pc obviously if it is paid to flash but if you give it to update filware it will repair it

Buenas, la verdad es que tengo un problema hace tiempo con mi A107M que intente hacerle un downgrade pero no pude mi celular no completo el proceso y quedo completamente inútil, tuve que mandarlo a servicio para que hicieran una flasheo a la fuerza desarmando el celular, le comente lo que estaba haciendo y me dijo que había probada varias formas y que no sabe pero justo en ese celular si le pones otro frimware su display no respondia y no mandaba respuesta de ningún tipo... que puedo hacer?

Surface pro 5 1796 touchscreen and battery problem.

Has anyone managed to fix the problem of no touchscreen and battery after updating firmware?
I have tried everything from trying to use Linux - fwupdmgr to replacing the Winbond bios chip on the motherboard
The touch firmware will not install. It shows on screen during boot up:
Please wait We are installing a system update
(Twice but no progress bar)
Then in device manager it says device couldn’t start code 10 - attempt to change attributes to memory that has not been committed.
Status attempted 0xc000002D
(Which I believe is access denied)
I really need someone expert help in this matter.

Hi.
I have the Surface Pro 6 too. Touch does not work even in bios uefi. It's not a hardware issue. I think it's from the bios. Is it possible to go back to the first version in Bios Uefi? Did you solve your problem?

Hi
No didn’t solve it yet. But I believe it’s not possible to go back as the firmware isn’t available on Microsoft website anymore.
Does your battery still work as mine turns off as soon as you disconnect adapter.
I have even changed the bios chip with a brand new one and it still didn’t work!
Where are you based?

Sdpuk2020 said:
Hola
No, aún no lo resolvió. Pero creo que no es posible volver atrás, ya que el firmware ya no está disponible en el sitio web de Microsoft.
¿La batería sigue funcionando cuando la mía se apaga tan pronto como desconecta el adaptador?
¡Incluso he cambiado el chip bios por uno nuevo y todavía no funcionó!
¿Dónde se encuentra?
Click to expand...
Click to collapse
investigando mucho en otros foros, descubrí que alguien logró resolverlo reprogramando el chip biosonda.
Hay ocasiones, que ni siquiera cambiando el chip, puedes solucionarlo, porque en las instrucciones internas, la pantalla táctil está desactivada.
Todos los problemas provienen de que el "ME" (Intel® Management Engine) está dañado o algunas opciones están deshabilitadas.
Se necesita un reprogramador de bios.
¿tienes que intentarlo?
Sry. Google translator