[Help] Bricked mid7022 Coby Kyros 4GB - General Questions and Answers

Hey,
I have problems here. My sister bought a Kyros mid7022 from Coby. I installed the official Android 4 Update and it failed. The tablet is stuck in fastboot mode. I can switch to fwdn mode by holding the home button. I tried everything i could and its still not working. I think the only options is a fwdn firmware but the one from androtab.info isnt working. I get a CRC error at the last seconds of the crc check. I hope theres another way, also tried to flash cwm to get into recovery. But I tried every key after reset the device it wont show up. It wont turn off also. What the hell can I do now. The bggest problem is that the androtab.info logo is showing up and i cant send it back that way :]
Big thx to all ppl are going to help me ;]
-------
update1
-------
I finally got sth flashed, this one here:
Emdoor EM73 capacitive GC2M 4K from androtab.info
But the bootscreen only shows up for a second then the device restarts.
Flashed clockworkmod through fastboot but cant enter it any ideas ?

Related

[Q] Please help!!

I own an Asus P320 WM6.1 device. In the morning, when I reset my phone, it got stuck at "welcome" screen. It just wouldn't start. I tried it several times and waited for a long time for it to load, but in vain.
I then though I might as well flash it as I had had the ROM I was using in my memory card(P320 WWE V4.15.0), but always got the "init sd download fail'. As the last resort, I thought of flashing it to WM6.5 ROM that I had used before. It flashed successfully, but now it gets stuck at the bootscreen, showing the version number. I tried flashing a couple of times with different WM6.5 P320 compatible ROMS(including hdubli's), but the result is the same.
Have I bricked my phone? My phone responds to soft reset on poke and all I can see is the asus bootscreen. Please help!!
sry my english its not so good , but have you reflash the original ?
You mean do a factory reset(cold boot)?
Well I cannot do that as I cannot start my phone. It gets stuck at the screen where it shows Asus logo with the version of the ROM currently in use. As stated before, I however tried to flash it using the latest WM6.1 ROM available on the Asus website(I had it in the root of my memory card), but got the problem of "init SD download fail".
What do I do??
Edit: I also tried hard reset. It asks me two options:
Press [Send] key to restore
Press [End] key to exit
When I press the send key(call button), I get the message "cold boot start". After a couple of seconds, the ROM version number overlaps this message, and it gets stuck.
Does no one have a solution for this? Please help. I am without a phone right now.

[Q] Galaxy mini S5570-Can't boot to recovery after flashing ClockWorkMod recovery

Hi,
I've recently flashed ClockWorkMod Recovery using Odin to my Samsung Galaxy mini S5570 device,
the opertion was succesfull (Odin said PASS), but now when I try to boot into Recovery (pressing Middle button and power button) the device just get stuck in the Samsung screen (the first screen you see when you regulary power on your device).
Will be glad for some help!
*Any Ideas how to fix this problem? or why does it occur?
1) Will HardReset/FactoryReset the phone will uninstall ClockWorkMod Recovery?
2) Do I need to ROOT my device prior to the flashing of ClockWorkMod Recovery with ODIN?
3) Can I remove/uninstall the ClockWorkMod Recovery?
Thanks advanced for your help!
Same issue
Hello,
I've got exactly the same issue and do not find any answer
Thank you for your help!
Etienne
Same here..
Same problem here, It just shows the samsung logo and that's all, I can't finish installing firmware
Stuck with first screen
I am also stuck with the opening screen. Prior being bricked the phone went through the washing machine. Board was cleaned. It still has carrier SIM lock on it. I am digging the forum for imput, but no luck so far.
With USB clable plugged in it shows only a small phone and computer icon with yellow triangle+exclamation mark on the dotted line between them. Cannot load the hard reset menu. The Download menu with big triangle comes up, that showed at least the display is working.
Odin 4.38 was able to flash the Clockworkmod, but no Gingerbread or some other update. The time runs happily but MIBIB will not load, and i must turn everything off.
I have the same issue. Wondering if there is a fix for this. Can boot into download mode but not Clockworkmod Recovery. Stuck at Samsung screen.
Okay well I found a fix!
I was trying to update CWM Recovery via Odin when I still had Froyo installed on the device. Classic rookie error. You need gingerbread to use the latest CWM. All I had to do was install an official samsung gingerbread ROM via Odin and then I was able to re-install CWM sucessfully. Now running CM9 on my Galaxy Mini and everything is great, very snappy (few bugs though)

Samsung Galaxy S II Total OS Fail

Hello, I will try to explain how I got myself into my current situation which is kinda helpless and it ends up with the SGS II Logo on screen.
I rooted my phone - no problem
Flashed an Insecure Kernel - no problem
Flashed - CWM - no problem
Then I tryed to put the Ressurecion ICS mode.
Started CWM mode, wiped all data but for some reason soon afterwards my phone
turned off. When I started it again it always ended up at samsung logo screen :/
I can put it in download mode. I tryed to flash roms, with or without pit files.
When I do so I get this screen like terminal with many signs like "failed to load booth catche" etc, unable to mount,etc. Then I get the option to either reboot,to wipe data catche or factory reset. No matter what I choose I always end up at logo screen. Please,I beg of you help me !!
SinisterHatred said:
Hello, I will try to explain how I got myself into my current situation which is kinda helpless and it ends up with the SGS II Logo on screen.
I rooted my phone - no problem
Flashed an Insecure Kernel - no problem
Flashed - CWM - no problem
Then I tryed to put the Ressurecion ICS mode.
Started CWM mode, wiped all data but for some reason soon afterwards my phone
turned off. When I started it again it always ended up at samsung logo screen :/
I can put it in download mode. I tryed to flash roms, with or without pit files.
When I do so I get this screen like terminal with many signs like "failed to load booth catche" etc, unable to mount,etc. Then I get the option to either reboot,to wipe data catche or factory reset. No matter what I choose I always end up at logo screen. Please,I beg of you help me !!
Click to expand...
Click to collapse
Have you tried returning it to stock with a one-click return to stock ? you will lose your root permissions but they are easy to get back lol
I havent tryed it. Isnt it just for nexus too ? And I cant enter my phone so I could just USB debugging :X
SinisterHatred said:
I havent tryed it. Isnt it just for nexus too ? And I cant enter my phone so I could just USB debugging :X
Click to expand...
Click to collapse
yea alot of samsung phones have one click return to stock
you just need to get it into download mode (probably by holding volume down and power at the same time then connecting ur usb i can provide links just PM me

Bricked Asus memo pad 8 ME180A

Hi guys
Please someone help me out with this problem
I have this tab for my daughter and it always freezes so i reset it every week or so, but in the last reset i made the mistake and rooted it in order to install a clockwork recovery with fastboot everything gone wrong and i don't know why the recovery stays black, I tried to reset the tab in the setting it reboot to recovery and the screen stays black again, i downloaded the ofw from asus site and tried to install it with fastboot but when it says intalling system it says locked tablet and stops and now the tab don't boot and stays in splash screen.
Is there anyway to unbrick it I have a transfofmer before and it has an utility named easyflasher to install the ofw fir bricked tabs, i tred to search one fir the memopad can't find it.
Plase help me out thanks

Unbrick ZenPad Z170CG

It's stuck at the ASUS logo. A friend gave it to me to fix since it wouldn't download apps from google play which led me to believe that it had software problems so I decided to update it. It's worth noting that it kinda bricked itself after factory resetting before the current brick. It wouldn't boot and it was stuck at the ASUS logo, but somehow it fixed itself after several reboots. After it fixed had itself, the problem with not being able to download apps was still present. One time I turned it off and it wouldn't turn back on. I tried to go into recovery, but then I realized that the recovery was gone too. It was stuck at "no command" screen, so the only way to modify the files was through the bootloader. I found a firmware zip with the .bin files in it, so I flashed them one by one and I got the recovery back. Installed the update via a good sd card and it was stuck at the ASUS logo. I sideloaded it through recovery and got the same result. I also tried sideloading it through the bootloader which also gave me the same result. I'm all out of options I can think of. If anyone has any idea, please share it.
Thanks in advance!
Hi !
I see that you have posted here as well https://forum.xda-developers.com/an...oot-method-t3311752/post71149052#post71149052 and that`s the best section from where you can receive more help , keep an eye on it
Good luck !

Categories

Resources