Database Info

HTC TOUCH P3452 Touch screen not working

Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...

negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
If it is defect, you can replace your touchscreen for low costs. I paid 20 euro's for my new touchscreen. You also need an T6 torx to open your mobile.

negaboys said:
Hi guys,
I have HTC Touch GSM P3452, its touch screen not working for a last one week.I had did soft reset and Hard reset but no use.
I had read the Alignment problem fix thread but i can edit the registry in my phone using mobile registry editor(write access denied message, i had got).
how to make my touch screen work.Help me out soon...
Click to expand...
Click to collapse
Get a new digitizer on eBay, fairly cheap and easy to replace. Can get one to match your housing color. Less than 20 Euro for sure.

thanks for reply back soon..
there is no way to recover my touch screen??

any technical way to recover my touch screen, techies help me out...

I don't seem how you could 'repair' it. I think it is broken or not. Or the connecter is not in the right position. If so you must open up your mobile either way. I think it's best to just replace the touchscreen it also removes the scratches if you have those. And it's very cheap.

thanks cywood.. its not broken, just it stops working..

negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.

digitizer
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.

jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
in your case, it will probably be fixed with a hard-reset.

jagooch said:
negaboys , the same thing just happened to me too. I run the tweaking applications here - doing the HD Tweak and Kaz TD2 instructions only. Then rebooted my AT&T Tilt. After the Titl started, the touch screen no longer worked. And when I went into the utilities to undo the changes I had made, but the applications require a touch for you to use them.
I am really stuck.
Click to expand...
Click to collapse
use mymobiler using that u can control ur mobile thru ur computer google for it

praveen_y76 said:
i thinks it is less effort and much easier to replace the touch screen. its called digitizer. if u r in india ull get it for rs300/-. changing it is extremely easy, just google and search for videos on htc screen replacement. it took me just 45 minutes to open my htc and change the screen.
Click to expand...
Click to collapse
Hi Praveen,
from where u got the digitizer...? was it original?
mine also stopped working two days back. I am in chennai and just heard that HTC has opened a new service centre here so maybe i can try out my luck there.

negaboys said:
i recovered my touch screen..
i have wrote here http://www.negablog.co.cc about how i recovered my touch screen without replacing digitizer.
Click to expand...
Click to collapse
could you please give the exact link where you have mentioned about it?
Thanks

crapula512 said:
in your case, it will probably be fixed with a hard-reset.
Click to expand...
Click to collapse
The hard reset fixed my problem. I also had corrupt files on my microSD card, so I formatted it as well.
Its amazing how many problems that look like hardware issues are actually software/file system issues.
For those who jumped right to "replace the screen" as a solution, I believe you need to rethink your troubleshooting strategy, as you'll convince people to spend time and money performing a fix action that doesn't work.

mohitsapru said:
use mymobiler using that u can control ur mobile thru ur computer google for it
Click to expand...
Click to collapse
That is a great program! I've heard of it before, but never thought I would need it. It looks useful for getting screen shots from your mobile device as well.
Thanks!

repeated screen alignment problm
hi guys,
a month back my elfin screen stopped responding,after searching threads,i foundout that the digitizer was dead so i replaced it .touch response came back,but now every few mins i have to align the screen to have proper response.i m using onyx6.5 /mikys/ahen roms of latest build.and lower part of screen was not responding for touch some times,so to align screen was not possible as start button was in lower part in newer builds,so im starting roms of older builds in them start button is at top,where i came somehow reach screen alignment page.i m not able to find what is wrong wth my device??whether the digitizer was not working properly???
is there anyone who faced similar problm??any one there to help me out????

cant able to bypass alignment screen?
go here http://www.negablog.co.cc i had wrote about how to bypass the screen alignment screen,

change a new screen

Solution
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!

i9023 - Replacement screen touch input not working

Hi,
I recently dropped my i9023 and smashed the glass.
Bought a new screen with digitizer from global direct parts (www globaldirectparts com/Samsung-GT-I9023-LCD-and-Digitizer-Assembly-p/smsng6102150.htm)
Having put the new screen in it boots up fine and displays perfectly but the touch screen is not working at all and I can't do anything. If I put my smashed screen back in touch input works fine.
I've flashed back to stock I9023XXKB3 and I9023XXKB1 firmware, but nothing seems to help.
The ribbon to the screen doesn't appear to be damaged and because global direct parts had a minimum purchase of 2 I have 2 new ones and they are both unresponsive.
Anyone have any ideas?

My first idea would be to have the manufacturer fix it.

Sorry you are having trouble getting the touch screen to respond. I too have cracked my screen and would be very interested in your strip down and replacement steps as I am going to be doing the same. If you get time, could you write down your steps. There is a pretty good teardown at
http://www.ifixit.com/Teardown/Nexus-S-Teardown/4365/1
but I am not confident of the last bit of using a heat gun to separate the screen from the frame. Did yours come off easy ?

Yes I could have sent it to an authorized repairer but I would of been without the phone for a a while and it would cost twice as much. Plus I like pulling things apart.
markread544 - I pretty much followed the ifixit guide. however when pulling out the motherboard make sure the front and rear cameras and speaker are loose as well otherwise it wont come out.
I didn't use a heat gun, I just applied pressure until it started to lift, it would of definitely been easier if it had been warmed up but I didn't want to use a heat gun either. You would want to use an adjustable heat one on low if you did, I think a hair dryer would work as well.
I pulled mine a bit further apart then they did, the grey part in the attached pic comes off as well which makes it easier to get the screen out of the front bezel which it is also glued to.
Phone is back together at the moment with the cracked screen but I'll take some photos if I pull it apart again.

same problem here.
i bought an lcd on ebay for i9023 (slcd)
display OK , but no tactil response.
i had MP the OP but still no answer.
if you have any suggestion
thanks

how much for the screen? seems that 9023 is cheaper than 9020

80 euros for the less expensive , about 120-150 for the others

I ended up returning the screens from global direct parts and after about a month they gave me a refund.
After being quoted AU $250to get the screen replaced by an authorized repairer I decided to try again and bought a replacement screen on eBay from a seller called stream_beautiful for $86.
Got it today, installed and it works perfectly. No idea why the original screens from global direct didn't work.

I'm sorry to bump such an old thread, but I was wondering if there was any more information on this issue... I ordered an i9023 screen to repair a friend's phone about 2 months ago and had the same issue as the OP with it; touch input didn't work. I then contacted the seller (forceviewer on aliexpress) and he told me he'd replace it. After sending it back I then had to contact him again and send him pictures of the back of the old screen (with which touch input still works) because according to him there are 2 versions. Now I received the second screen a week ago and lo and behold, it exhibited the same problems. I noticed a number on the back of the screen is different, and the atmel IC (which I assume handles the digitizer input) has a different number on it too, however the seller has now adopted the position that it is definitely the correct display (quote: "If the pictures is right
The item will be right
I just send you the one same with your picturs
There are only two version.
Thanks")
Can anyone shed some light on what causes this? I know the guy's company tests their displays before sending them out, so that's probably not the problem, and receiving 2 faulty units in a row would be a bit weird, so I guess there's actually multiple versions (with a different digitizer controller IC?) which aren't compatible with each other... How do I make sure I'm getting the right one for my friend's phone? And, optionally, how would I go about convincing the seller to take this one back too and send me one that really works?

I'm having exactly the same issue...two replacement screens and touch input non responsive, re-install original and hey presto no problem...what I have noticed is that the part number on what I assume is the digitizer is different...
original -> KJ00423-101228-P00-7F-1
replacement -> KJ00423-101228-P00-5F-1

Yeah, my replacement says 6F-1 at the end, I can't check the original right now because my friend has his phone, but I'm willing to bet it doesn't say the same. Maybe I can make my case with this with the vendor, I'd really hate to have to buy another one of these displays for nothing

Guys,
It's the third SLCD screen that one of my fried is replacing to my I9023 Nexus S, and none of them is working. Yesterday he told me that when he bough the third one, the seller told him to "reprogram" the phone, because the drivers for new SLCD will be installed only then.
To be honest I didn't quite understood him, so, I though that the seller means to flash with a ROM. I did that, I installed CyanogenMod 9, everything went fine, but the touch still not working .
Does anyone knows how the phone could be completely wiped. Meaning everything what is in it to be reinstalled from the beginning....
I don't know what else to do, besides to buy a new phone

Hi All,
Just want to ask if anyone came to the solution yet ...?
Cheers,

no touch
Hello
i have the same problem:
1. The display works
2. But no touch reaction
i had bought a new screen for my I 9023 .
thanks for solutions

Yep, I have the same problem.
Original: KJ00423-101216-P00-1F-1
Replacement: (Not responding to touch): KJ00423-110207-P00-1F1
eBay Seller: mike410512

Bump - anyone sort this issue out?

I know this is an old thread, but since I have a shattered SLCD screen and i'm willing to replace it, i'd like to know what to do in case there's no touch response...

To get touch input again
Hi all,
I have smashed my phone screen twice on my S3 i9300. The first time I had the issue with the touch screen not detecting input but displaying correctly, I had taken it to an authorised repair centre and initially they did not know what was wrong.
There is only one way to "fix" this situation. You must remove the custom recovery and then reflash your phone with the stock samsung rom. Flashing the stock rom with stock recovery should pose no problem as it will be "official" and thus not blocked by stock recovery.
After reflashing, you must do a factory wipe + data reset. This is where you change your screen, making sure not to boot the phone for "the first time". If it does not work, repeat the reflash + factory wipe and try again.
The samsung rom will register the new hardware profile, and touch input will work. Why it works this way is beyond me, but taking these steps when changing the screen on a custom rom will ensure that the touch input works. Perhaps custom roms "borrow" drivers left over from stock rom? I don't know.
You can back up your current rom and restore after messing around with the samsung stock rom and you have gotten your touch screen working properly.
I have tried a whole heap of different "solutions" with this problem and this is the only one that works, and if you are taking it to a repair centre, make them aware that you have a custom rom installed.

Change screen
sinphild said:
Hi all,
I have smashed my phone screen twice on my S3 i9300. The first time I had the issue with the touch screen not detecting input but displaying correctly, I had taken it to an authorised repair centre and initially they did not know what was wrong.
There is only one way to "fix" this situation. You must remove the custom recovery and then reflash your phone with the stock samsung rom. Flashing the stock rom with stock recovery should pose no problem as it will be "official" and thus not blocked by stock recovery.
After reflashing, you must do a factory wipe + data reset. This is where you change your screen, making sure not to boot the phone for "the first time". If it does not work, repeat the reflash + factory wipe and try again.
The samsung rom will register the new hardware profile, and touch input will work. Why it works this way is beyond me, but taking these steps when changing the screen on a custom rom will ensure that the touch input works. Perhaps custom roms "borrow" drivers left over from stock rom? I don't know.
You can back up your current rom and restore after messing around with the samsung stock rom and you have gotten your touch screen working properly.
I have tried a whole heap of different "solutions" with this problem and this is the only one that works, and if you are taking it to a repair centre, make them aware that you have a custom rom installed.
Click to expand...
Click to collapse
Did anybody else use this way?

spanusorin2005 said:
Did anybody else use this way?
Click to expand...
Click to collapse
UP ..
i'm going to buy a screen + digitizer and i would have some advice about this, what code should i look ??? there are only two kind of screen or more ? what should i ask to the seller ???

replaced cracked lcd screen now the touch isnt working

i just replaced my cracked screen, put my phone all together and it was working perfect for about 10 minutes. now the touch screen will not respond. i can turn the screen on and off but i can not use the touch to unlock it. what could it be?

Reboot or wipe cache could help
Send with a homebuttonbug

Could be the digitizer has stopped working?
--------------
If you are new to xda please watch this video it'll help you out )
https://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player

k2worldwweapon said:
i just replaced my cracked screen, put my phone all together and it was working perfect for about 10 minutes. now the touch screen will not respond. i can turn the screen on and off but i can not use the touch to unlock it. what could it be?
Click to expand...
Click to collapse
I've had al similar problem with my htc sensation. Turned out not all components work together nicely. I replaced it with a LCD / digitizer bundle and then it worked fine. A repair guy I talked to confirmed the issue and told me he only replaced them in pairs because of this issue. It still doesn't make a while lot of sense to me but searching round the internet seems to confirm this, at least for sensation.
Sent from my HTC One S using xda premium

For Sensation maybe, but here it's a sandwich type screen (glass+digitizer+display), no option for separate replace.
Best thing we can suggest is to re-connect all wires.
P.S. Where did you get the new screen? Could be a non-genuine screen...

[Q] Wrong Digitizer

I have an HTC Sensation that has a digitizer that is not working at all, and I think someone has probably attempted a digitizer replacement on it. I say probably because I haven't taken the phone apart to check yet, but the tamper sticker has been punctured and the screen's condition is pristine (no visible cause for it not working) so it is likely. What I am thinking is that the previous owner of this phone tried to replace the digitizer, but purchased the wrong model/brand digitizer and decided to call it quits when it didn't work.
The phone is stock, s-on. Debugging is not enabled. It does not register any touch anywhere on the digitizer.
I am trying to get the phone to the point where I can use the flash PG58DIAG.nbh method on it, which would probably resolve the problem.
My question is if anyone knows a way to get the phone from stock to s-off & super CID but without the use of the phone's touchscreen? Keep in mind that the problem is that USB debugging on this thing is off, so I really just need a way to turn that f***er on without using the touchscreen. Once I get that, everything else is relatively simple.
Worst case is that I have to buy another digitizer and replace it, but I was hoping to repair this phone without having to do that. Additionally, I'd have to guess at which digitizer model/brand to buy, since I don't have the original digitizer to verify which brand/model I need.
Thanks for any help you can offer.

digitizer recalibration

hi - I have a htc desire s thats on original firmware. I recently replaced the lcd/digitizer as a complete unit with a genuine replacement part. The phone was working perfectly in every way up until a few days agoo when i noticed that the side volume buttons wernt working, so i replaced the volume buttons as well with a genuine htc part. Now the phone starts up pefectly but the digitizer is not responding to my touches anywhere. Ive checked that ribbons are seated properly several time but still no response from the digitizer. Ive been told that the digitizer needs recalibration, been told to make a "goldcard"...which i did...also use the file "PG76DIAG.nbh" onto the sd card,,,reboot phone...get into the bootloader menu and it should give me the option to recalibrate the digitizer...but i get no such option in there...any help and ideas please..thanks