Database Info

Case mate cases

I am debating which case to buy the tough case or the barely there case!!!
Anyone 's comment is appreciated!!
Sent from my Desire HD using XDA App

Barely there case, protection from minor scratches occuring from sliding your phone accross a table, doesnt not add any fall protection to it and it is not raised enough to keep your screen from being scratched if layed on its face.
Tough Case adds minor fall protection and is raised in the front to protect the screen if you lay it on its face or it falls on the face. Doesn't add alot of bulk to the phone.
I would honestly not recomend getting the Barely There case unless you are 1: Not Clumsy 2: Have a sit on your but at a desk job all day 3: Don't have any young kids or roudy pets.
I would recomend getting either a Casemate Tough Case - Casemate Pop Case - Otterbox Commuter/Defender Case.
Oh and a Zagg Shield for the screen.. those things are freakin insanely hard to screw up.

I'm using the Black Barely there, its awesome

I am using the Tough Case and I love it. Not much bulk for a fair amount of protection.
sassij said:
I am debating which case to buy the tough case or the barely there case!!!
Anyone 's comment is appreciated!!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse

sassij said:
I am debating which case to buy the tough case or the barely there case!!!
Anyone 's comment is appreciated!!
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I have EVERY colour of the Barely There, I absolutely love them (the white is my go to colour!). I have a few other cases, epik and one TPU plastic purple case from best buy, but none compare to slimness of the BT's.
Also depends on how you are with your device. Do you tend to throw it around, or are you careful with it? Barely There's are nice, but you'll need to be careful, as it's not a "full-coverage" kind of case.

Thank u all for the info. I have the tough case and it is great but it collects a lot lint and dust.
The barely there case should be here today, hopefully this one is the winner.
Sent from my Desire HD using XDA App

ive been using the casemate pop case..love it so far..
wouldnt mind trying out the otterbox defender or speck candyshell..
the barely there case doesnt seem like it has much protection..

I love my tough case, looks great and protection is great. Now if you are gonna be taking your SD card and battery out a lot, then it might be a pain..

emarsha said:
I have EVERY colour of the Barely There, I absolutely love them (the white is my go to colour!). I have a few other cases, epik and one TPU plastic purple case from best buy, but none compare to slimness of the BT's.
Also depends on how you are with your device. Do you tend to throw it around, or are you careful with it? Barely There's are nice, but you'll need to be careful, as it's not a "full-coverage" kind of case.
Click to expand...
Click to collapse
I like white cases on my phones too, but I haven't tested this one...do you know if they get all grimy and yellow after a while??
Thanks!

i have the pop case as well. It seems to me like it protects the corners of the unit better. The tough case does not have a hard shell that extends around the corners of the phone.

I have the tough case and I love it. Feels great in the hand and protects the phone very well.

Nothing beats the case mate pop! Cases. **** design. Good durability.
Sent from my Desire HD using XDA App

The tough case works great for me. It seems to offer plenty of protection while adding minimal weight.

Can't say enough good things about the tough case, I love it!

I use the platinum case from best buy. Does what I need it to, though it is a little heavy.
Sent from my Inspire 4G using XDA App

Tired of Commuter, Any suggestions?

Ok so ive had the blue/black Otterbox commuter now for a few weeks and I did like it at first but now im just sick of it, makes the phone a little to thick for how often i use it and just has gotten on my nerves, anyone able to recommend something with about the same protection maybe a little bit more thin?
also, ill probably ship this one off to someone when i get a replacment

Felt the same way with my commuter. From what I've red its the thinnest one of that type of case. The tridents look cooler, but myself I just got an incipio feather shine and I love it. Provides more drop protection than you would think, but looks way cool

Same protection? Get the Incipio Silicrylic case, looks tons better than the Otter box.
If you want a sleeker case overall, get the Seidio Surface case, with kickstand.
Sent from my sexy white HTC One X on T-Mobile

yeah i been eyeballing the seido....hows the grip on it?, if the commuter had grip i could deal with the thickness

Pretty good, not a glossy finish and the kickstand doesn't add a weird bump like with the Seidio Active. Lmk if you want pics comparing the normal Surface with the Surface kickstand.
Sent from my sexy white HTC One X on T-Mobile

sure

Had a Best Buy gift card so I grabbed that platinum series case/holster combo and I like it. Pretty protective and slimmer than the Commuter for sure.

I used to use the Commuter on all my iPhones, but the one for the One X is just too hard to get on and off for me. I wanted a slimmer case that didn't leave the camera lens hanging out the back (and I didn't want to break the bank either). I found this one on eBay and it's fantastic. And only $7.95, too. The seller ships super fast, too (from California to Kentucky in 2 days).
http://www.ebay.com/itm/180894387775?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Incipio NGP here. I like the softer feel and the decent protection around the edges. The included screen protector is rather lousy, but you can use the coupon to get XtremeGuard for next to nothing. You will have to cut it down a bit to work well with the ngp and not lift at the edges.

i havent gotten mine yet for the One X but i ordered the Barely There case by Case Logic, i had it for my Inspire 4g and another for my Galaxy S2 Skyrocket, cant wait to get mine for this phone, they are thing light and stay on, they arent going to protect from drops like the commuter but they will keep it from getting scratched to hell on the back.

theking_13 said:
Same protection? Get the Incipio Silicrylic case, looks tons better than the Otter box.
If you want a sleeker case overall, get the Seidio Surface case, with kickstand.
Sent from my sexy white HTC One X on T-Mobile
Click to expand...
Click to collapse
Have you noticed the the silicone on the silicryilc to be loose at all? The top and and bottom worry me because they lack the plastic coverage.
Sent from my HTC One X using Tapatalk 2

as the guy above definatly wanna see something thats not loose
think ima go with the seido but not 100% yet

blessedswine said:
i havent gotten mine yet for the One X but i ordered the Barely There case by Case Logic, i had it for my Inspire 4g and another for my Galaxy S2 Skyrocket, cant wait to get mine for this phone, they are thing light and stay on, they arent going to protect from drops like the commuter but they will keep it from getting scratched to hell on the back.
Click to expand...
Click to collapse
Will not protect the lens cover at all. If you are worried about "scratching like hell" you might want something more substantial.

really cause the other two i have had were fine even the Inspire which had the lens that flared out like the HOX kinda sucks now ill look into another case maybe the incipio feather? http://www.amazon.com/gp/product/B007ZT4UWI/ref=oh_details_o00_s00_i00 or this as from the pictures it looks like it helps with the lens.

blessedswine said:
really cause the other two i have had were fine even the Inspire which had the lens that flared out like the HOX kinda sucks now ill look into another case maybe the incipio feather? http://www.amazon.com/gp/product/B007ZT4UWI/ref=oh_details_o00_s00_i00 or this as from the pictures it looks like it helps with the lens.
Click to expand...
Click to collapse
I ordered both the feather and the ngp from Incipio. Sent the feather back to because the protection was too minimal. Love the ngp so far. Not too bulky not too flimsy. The provided screen protector sucks big time tho. Incipio has versions for both hox models make sure you get the right one. Order from Incipio direct, indirect same price

msfguard said:
Ok so ive had the blue/black Otterbox commuter now for a few weeks and I did like it at first but now im just sick of it, makes the phone a little to thick for how often i use it and just has gotten on my nerves, anyone able to recommend something with about the same protection maybe a little bit more thin?
also, ill probably ship this one off to someone when i get a replacment
Click to expand...
Click to collapse
http://www.incipio.com/HTC-One-X-Wo...ualPro-Hard-Shell-Case-with-Silicone-Core.asp
Sent from my HTC One X using xda premium

ealvinito said:
http://www.incipio.com/HTC-One-X-Wo...ualPro-Hard-Shell-Case-with-Silicone-Core.asp
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Graced with a sleek painted aluminum finish on a durable hard shell exterior and fitting both World and AT&T versions of the phone.....
I wonder how that works or fits?????
Sent from my HTC One X using xda premium

1meanrex said:
Have you noticed the the silicone on the silicryilc to be loose at all? The top and and bottom worry me because they lack the plastic coverage.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I am more worried about the side of the case being so flexible. Compared to my old HTC Sensation's otterbox case which was more rigid.
Apart from that, i like the case.

I dropped mine and cracked the screen, it was seriously the smallest drop ever for a phone and still broke. Most fragile phone I've ever had given how many other of my HTC's have been used like a football.
So once its fixed/replaced, I wont be taking a 2nd chance despite hating cases.
Thought about the Incipio feather Ultralight but based on the comments, sounds like it won't offer any decent protection. Might order the NGP Semi-Rigid Soft Shell Case instead. But from the photos, does the case sit over the buttons or are there cut outs?
What are the other options as far as minimal size but decent protection? I'll take my chances breaking it again before using some bulky ugly case!

HTC - NGP
Pretty sure there is only a single NGP that fits the international and AT&T version. The case covers the buttons but all are functional. I purchased the Nillkin Scub first which is very sleek but didn't offer a substantial lip around the screen. The NGP offers good protection without being bulky. Because it's designed for the international version the cutouts don't line up perfectly (microphone and speaker) but all the buttons and ports work fine. Had to make a small cut to get one of my power cords to fit.

Best case for HTC One X

Hello fellow one X owners,
I am new to the community, thanks to Toaster Strudels. Anyways, I am looking for a case, costs are not an issue. What are some of the best cases to get for this device?
Thanks in advance!

d0wnti.me said:
Hello fellow one X owners,
I am new to the community, thanks to Toaster Strudels. Anyways, I am looking for a case, costs are not an issue. What are some of the best cases to get for this device?
Thanks in advance!
Click to expand...
Click to collapse
Depends,
Strength-Otterbox Defender
Lightweight-Amzer Shellster/Incipio Feather
TPU-Rocketfish
Hybrid-Otterbox Commuter/Speck Candyshell
*THESE ARE ALL IMO

danny39 said:
Depends,
Strength-Otterbox Defender
Lightweight-Amzer Shellster/Incipio Feather
TPU-Rocketfish
Hybrid-Otterbox Commuter/Speck Candyshell
*THESE ARE ALL IMO
Click to expand...
Click to collapse
Thank you, I will be looking into those cases

I like the Seidio Active line, myself. I've used them on all of my Android phones and they offer great protection without adding much weight or bulk.

I bought the ballistic slim case, it should be arriving tomorrow. Seems decent, I bought other ballistic cases and was overall satisfied with them

That one protects very well. Just doesn't look too pretty haha
Sent from my Speak and Spell

Incipio Silicrylic.
Had the Ballistics, Diztronic, Speck Candy shell Grip, Rocketfish TPU, and CIMO TPU....none lasted more than a few days with me. The Incipio is real nice. I almost want to pick up a second color.
Sent from my HTC One X using Tapatalk 2

Still digging my Casemate Smooth. A lot. Purchased from expansys.
Sent from my HTC One X using XDA Premium HD. In between Force Clo...

danny39 said:
That one protects very well. Just doesn't look too pretty haha
Sent from my Speak and Spell
Click to expand...
Click to collapse
Well I only spent $15
so if I dislike it no big deal lol
cfn87 said:
Incipio Silicrylic.
Had the Ballistics, Diztronic, Speck Candy shell Grip, Rocketfish TPU, and CIMO TPU....none lasted more than a few days with me. The Incipio is real nice. I almost want to pick up a second color.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I have been hearing a lot about the Incipio, really going to check into them
Vendetta-NY said:
Still digging my Casemate Smooth. A lot. Purchased from expansys.
Sent from my HTC One X using XDA Premium HD. In between Force Clo...
Click to expand...
Click to collapse
Thanks, I will be sure to check it out!

Just purchased a incipio silicrylic, looking into the candyshell and feather cases now

Cool man! I don't doubt you will like it. I'm staying tuned to this thread as I have a bit of a case addiction.
Sent from my HTC One X using Tapatalk 2

My wife uses the incipio sillicrylic it is a nice case, however I just cant stand the case being loose on the sides of my phone. I am using the speck candyshell and it is built well with no flapping of the inner layers.
The only knock against the candyshell is don't plan on taking it off and on a lot it is a beast to get the case off the phone.

Right now I'm using the Speck Candyshell with a Steinheil ultra crystal (I think) screen protector. I cn honestly say that out off all the cases I've used on all the phones I've owned, it seriously is amazing. Best one I've ever used. I always had an issue with dust, dirt, lint, or whatever else getting into my cases. So I started cleaning them every day. Well with this case, it's not an issue one bit!! It's a hybrid case. So it has a rock hard outer shell, with a nice hard silicone inside. The corners are almost "split" So if you drop it, the silicone will absorb all of the impact. Also, the edges on the front around the screen are all that same hard silicone. Couple it with a good seen protector and your good to go!!
Since its a hybrid case it doesn't add much thickness to the phone at all. It's amazing. Buttons all work perfect too.
It might be on the the expensive side, and a b*tch to get on and off at first... But it is WELL worth it!
Sent from my HTC One X on CM10!

I love my ROCK Quicksand case, looks great and adds no bulk, but grip. Won't protect your phone much, but.....be careful with it..

damagecase13 said:
Right now I'm using the Speck Candyshell with a Steinheil ultra crystal (I think) screen protector. I cn honestly say that out off all the cases I've used on all the phones I've owned, it seriously is amazing. Best one I've ever used. I always had an issue with dust, dirt, lint, or whatever else getting into my cases. So I started cleaning them every day. Well with this case, it's not an issue one bit!! It's a hybrid case. So it has a rock hard outer shell, with a nice hard silicone inside. The corners are almost "split" So if you drop it, the silicone will absorb all of the impact. Also, the edges on the front around the screen are all that same hard silicone. Couple it with a good seen protector and your good to go!!
Since its a hybrid case it doesn't add much thickness to the phone at all. It's amazing. Buttons all work perfect too.
It might be on the the expensive side, and a b*tch to get on and off at first... But it is WELL worth it!
Sent from my HTC One X on CM10!
Click to expand...
Click to collapse
I'm leaning towards this combination as another option. Thank you for the valuable insight

damagecase13 said:
Right now I'm using the Speck Candyshell with a Steinheil ultra crystal (I think) screen protector. I cn honestly say that out off all the cases I've used on all the phones I've owned, it seriously is amazing. Best one I've ever used. I always had an issue with dust, dirt, lint, or whatever else getting into my cases. So I started cleaning them every day. Well with this case, it's not an issue one bit!! It's a hybrid case. So it has a rock hard outer shell, with a nice hard silicone inside. The corners are almost "split" So if you drop it, the silicone will absorb all of the impact. Also, the edges on the front around the screen are all that same hard silicone. Couple it with a good seen protector and your good to go!!
Since its a hybrid case it doesn't add much thickness to the phone at all. It's amazing. Buttons all work perfect too.
It might be on the the expensive side, and a b*tch to get on and off at first... But it is WELL worth it!
Sent from my HTC One X on CM10!
Click to expand...
Click to collapse
+1
I have bought two Specks(red and black), both paired with Ghost Armor screen protectors...best part is how cases fitted for the 1X, w/o adding much bulk at all! Also my main concern was to protect lens - and it's just perfect...few mm over the camera
Sent from my HTC One XL using Tapatalk 2

Diztronic, Very good price and excellent look
Sent from my One X using xda premium

d0wnti.me said:
Just purchased a incipio silicrylic, looking into the candyshell and feather cases now
Click to expand...
Click to collapse
So the silicrylic case arrived today I do like it however the loose silicone does bother me a little bit.
Also the ballistic slim case is not what I anticipated it to be. I'll probably be selling that and picking up the candyshell or feather case.
Thank you all for the feedback up to this point I do appreciate it greatly.

d0wnti.me said:
So the silicrylic case arrived today I do like it however the loose silicone does bother me a little bit.
Also the ballistic slim case is not what I anticipated it to be. I'll probably be selling that and picking up the candyshell or feather case.
Thank you all for the feedback up to this point I do appreciate it greatly.
Click to expand...
Click to collapse
When playing with the silicone, yeah it is (compared to the Ballistics case for instance) but in real use it's treated me well. Did you get the incipio in a color other than black? If so, I may be interested in purchasing from you if you don't want it.

cfn87 said:
When playing with the silicone, yeah it is (compared to the Ballistics case for instance) but in real use it's treated me well. Did you get the incipio in a color other than black? If so, I may be interested in purchasing from you if you don't want it.
Click to expand...
Click to collapse
I got it in the grey/volt or neon whatever you want to call it. I will keep you in mind if I decide to part with it. I found it on ebay for 14.99 I believe
As for now I am going to price the other cases and go from there.

Cases

What are some of the best looking cases out there ? Plain cases like the otter box and that not with designs and stuff. And also some battery backup cases.

Jimmyriel said:
What are some of the best looking cases out there ? Plain cases like the otter box and that not with designs and stuff. And also some battery backup cases.
Click to expand...
Click to collapse
I use and love the nillkin TPU case. Had a few others, but went back to this. I love it because it is sleek and has a lip to protect the camera:
http://www.ebay.com/itm/Nillkin-Sof...046?pt=LH_DefaultDomain_0&hash=item460847d50e
For power, there is the Mugen cases:
http://www.mugen-power-batteries.com/htc/htc-one-xl.html
I just ordered a bag-o-cases from cruzerlite when they were giving away 30% off coupons. I love their designs, but don't like that there is no protection for the camera, but we will see:
http://www.cruzerlite.com/

I'm preferential to this case:
http://www.amazon.com/gp/aw/d/B007WGFN8E/ref=aw_cr_item_title
It's thin; offers protection for the screen, camera, and body; has the cool dual-textured back; and grips my car's console so my phone doesn't go flying around the car while I drive.
Sent from my HTC One X using xda app-developers app

mikelebz said:
I use and love the nillkin TPU case. Had a few others, but went back to this. I love it because it is sleek and has a lip to protect the camera:
http://www.ebay.com/itm/Nillkin-Sof...046?pt=LH_DefaultDomain_0&hash=item460847d50e
For power, there is the Mugen cases:
http://www.mugen-power-batteries.com/htc/htc-one-xl.html
I just ordered a bag-o-cases from cruzerlite when they were giving away 30% off coupons. I love their designs, but don't like that there is no protection for the camera, but we will see:
http://www.cruzerlite.com/
Click to expand...
Click to collapse
Do you know if anyone else is selling the clear black nillkin case?

I bought THIS a while back and have been happy with it. It was cheap. It feels good in the hand. It doesn't add that much bulk to the phone, (i.e. otterbox type stuff), and gives a bit more security for drops than just a TPU or silicone case. Only problem I've had with it is it peels up the screen protector on the bottom right corner. So yeah, good purchase for under $4.

Thanks for the link. The phone my cousin gave came with an otterbox case. Didn't like it. I really like the nillkin one. Found a grey one. Hopefully same as clear black.
Sent from my HTC One X using xda app-developers app

I prefer the otter box defender series, ya its bulky but its tougher than nails. I have dropped this thing from 20 ft up and no scratches or broken parts.
Sent from my AT&T HTC One X Evita S-Off running CyanogenMod 10

Gotta agree with the otter box. I couldn't find the commuter series in my local store so I bought the defender and falcon pawnched the screen out and BAM instant commuter series.
Sent from my HTC One X using xda premium

In really liking the Seidio Active case. It's stylish and had protected my phone through a few rough drops.

Is the seidio active a one piece design? For some reason it looks like a 2 piece to me?
Sent from my One X using Tapatalk 2
---------- Post added at 11:26 PM ---------- Previous post was at 10:45 PM ----------
Nvm answered my own question
Sent from my One X using Tapatalk 2

I have a speck case (which I bought from at&t, the day after the phone was released). It looks horrendous, but it does it's job. It's been over a year since it's release, and I've seen some good ones over the web (usually just browse random mobile websites). You'll come across something you like.
I've gone to not using a case though, as I really like the slim candybar feel.

I used to use an Otterbox...but the port covers fell off so I tried the Trident Kraken. The case looks really nice but it is SUPER BULKY. I was surprised at first how big the case was. I like the case and the how it looks...but I probably wouldn't buy it again
Sent from my One X using xda app-developers app

pacman314 said:
I used to use an Otterbox...but the port covers fell off so I tried the Trident Kraken. The case looks really nice but it is SUPER BULKY. I was surprised at first how big the case was. I like the case and the how it looks...but I probably wouldn't buy it again
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
That's what I got after I ditched the otterbox. The kraken ams case is average at best. Bulky as **** and the top left part of the plastic piece that fits on the screen side decided to to snap and break. Didn't drop it or anything just pulled it out of my pocket weird and the skinny piece of plastic snapped clean in two. I have since taken the outer plastic shell off and have been using the silicone innards as a case. Doesn't even fit right and its entirely too loose to really be useful. I don't have a choice until I get another case.
Thinking about getting either he incipio hard shell or whatever its called or a seidio active
Sent from my One X using Tapatalk 2

I got the ottorbox commuter (way cheaper on amazon then retail)
Got it after my screen shattered after dropping it 4 feet in a tpu case.
Absolutely love it. Not too bulky and great protection (check YouTube videos)
(The only time I wouldn't recommend it is if y need to take it out of the case frequently cuz its a pita)
Sent from my HTC One X using xda premium

I had this a while ago:
http://www.incipio.com/cases/smartp...feather-shine-ultralight-hard-shell-case.html
Was really nice while it lasted, unfortunately the corners started cracking. Really damn sexy case though, everyone who saw it was like "Whats that??!?"
Overall though, I can't recommend it since it cracked. I've been running caseless for a while now. Its nice.

Otterbox Commuter or Cygnett Workmate Evolution?

Hi
I'm just looking for some advice.
I'm using a Spigen Slim Armour currently and whilst I love the case I find it's a little bit slippery and the lip on the front is a little too shallow for my liking.
I cant decide whether to get an Otterbox Commuter or Cygnett Workmate. I've never owned cases from either but Otterbox is a brand name I recognise.
I like the workmates protection --- the drop test is convincing but there are reports about the charging port being too small.
The otterbox looks like it might be a bit slippery and may not offer the same protection.
Any advice welcome!

Im using an Otterbox Commuter right now, it's not that slippery though but kinda bulky compared to Spigen..
Sent from my GT-I9505 using xda app-developers app

m.garz said:
Im using an Otterbox Commuter right now, it's not that slippery though but kinda bulky compared to Spigen..
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks I happy with a bit of extra bulk for the extra protection. The spigen is very stylish but I'm not sure how well it will strand up to being dropped.. and it's pretty slippery!!

If I were you I'd go with the workmate. But I personally use the UAG navigator case.
Sent from my SCH-I545 using xda app-developers app

Go for Otterbox Defender (if you don't mind the size). :good:

I realised I wrote defender..I meant the commuter case. The defender is just too heavy duty for me.
Sent from my GT-I9505 using xda premium

JayceOoi said:
Go for Otterbox Defender (if you don't mind the size). :good:
Click to expand...
Click to collapse
otterbox defender; agreed.

Thanks..I've looked at the defender but it's just too bulky for my liking.
Sent from my GT-I9505 using xda premium

I currently use an otterbox commuter. I think for the protection it offers it's not that bulky.
It still easily fits in the breast pocket of my military uniform without being all that noticeable.
Plus otterbox has awesome customer service and warranty. I've gotten several brand new cases from them over the years when port covers broke off or if I had other issues with the case.
Sent from my SPH-L720 using xda app-developers app

Just got the Cygnett Workmate Evolution today. It's a bit bulky but I dont mind because it's going to protect the phone. One thing that I just noticed and you also pointed it out was the phone charger wouldn't go in and it's true. I'm using the stock charger that came with my phone. I'm probably going to get a new charger or return the case.

I have the commuter and I love it.
Sent from my SGH-M919 using xda app-developers app

Figsalan101 said:
Just got the Cygnett Workmate Evolution today. It's a bit bulky but I dont mind because it's going to protect the phone. One thing that I just noticed and you also pointed it out was the phone charger wouldn't go in and it's true. I'm using the stock charger that came with my phone. I'm probably going to get a new charger or return the case.
Click to expand...
Click to collapse
Thanks.. I'm sorry it doesn't fit. I think I read on xda that they were changing the design.
Sent from my GT-I9505 using xda premium

Bradden1 said:
Thanks.. I'm sorry it doesn't fit. I think I read on xda that they were changing the design.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
No need to worry. Yes, the charging port is too small (narrow) for the stock S4 charger, but one sharp knife and five minutes later... problem solved.
I received my Workmate Evolution earlier this week, and got my S4 this morning. Sure enough, the charging port was too narrow. I took a sharp knife and raked it across the upper and lower surfaces of the case's port, holding the blade at a 90° angle to the surface. Thus, abrading it rather than cutting it. Took about five minutes.
In Cygnett's defense, the OEM charger plug is much bigger than any other micro USB cable plug I own.
Hours into owning the phone, I can say I'm happy with both it and the Cygnett case.
Sent from my SAMSUNG-SGH-I337 using xda premium

+1 for otterbox.
I've been using it since iphone 4.
I recall dropping it from 6 feet on concrete.
The corner of hard shell broke but my iphone was flawless. They also sent me a replacement case and honoured on their lifetime warranty policy.
As for s4 commuter, I personally find it a 'little' slippery but not as much as a naked s4.

Bradden1 said:
Hi
I'm just looking for some advice.
I'm using a Spigen Slim Armour currently and whilst I love the case I find it's a little bit slippery and the lip on the front is a little too shallow for my liking.
I cant decide whether to get an Otterbox Commuter or Cygnett Workmate. I've never owned cases from either but Otterbox is a brand name I recognise.
I like the workmates protection --- the drop test is convincing but there are reports about the charging port being too small.
The otterbox looks like it might be a bit slippery and may not offer the same protection.
Any advice welcome!
Click to expand...
Click to collapse
I absolutely love both Otterbox and Cygnett. In the past, I've had issues with Otterbox's silicone warping out of shape. The new one on my wife's HTC One (which is identical to the one I tested on my S4 earlier) is way better than the older versions. Went with Cygnett this time purely based on aesthetics as I think the Cygnett looks wayyyyyy better.
The main differences in protection are that the commuter cases have the hard polycarbonate closer to the edges, while cygnett offers a wider tpu layer. The lip above the screen on the workmate is slightly higher than that of the Commuter. Cygnett's TPU is harder though I can't offer an opinion on if its better or worse (though it means the fit on the Cygnett is slightly better, espcially around the sections where the hard bits clamp around the soft bits). I think the hard shell is thinner but the TPU thicker on the workmate
Usage wise, the Cygnett is slightly grippier than the otterbox. The button presses slightly less mushy. The edge of the lip on the front is sharper and you'll notice it though it's not uncomfortable. I like the fact that the ports are uncovered, but the reports are right. The hole for the USB port is too narrow. I can't fit the original cable in, however it's not a deal breaker for me as I have 3 other cables and chargers. Nothing a sharp hobby knife can't fix though.
To be honest, unless the sharper edge on the front lip or usb port hole size are deal breakers, I would recommend the Cygnett. That being said, both are pretty good cases, and you can't go wrong with either when it comes to protection.

Bradden1 said:
Thanks.. I'm sorry it doesn't fit. I think I read on xda that they were changing the design.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
I ended up grinding down the sides of my charger just a bit. My charger still looks new and you cant really tell that i modified it. I can charge my phone now

h3lluvaninjuhneer said:
Cygnett WorkMate Evolution in grey....
View attachment 2015325
View attachment 2015326
View attachment 2015327
View attachment 2015328
View attachment 2015331
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
Pics...

Bradden1 said:
Hi
I'm just looking for some advice.
I'm using a Spigen Slim Armour currently and whilst I love the case I find it's a little bit slippery and the lip on the front is a little too shallow for my liking.
I cant decide whether to get an Otterbox Commuter or Cygnett Workmate. I've never owned cases from either but Otterbox is a brand name I recognise.
I like the workmates protection --- the drop test is convincing but there are reports about the charging port being too small.
The otterbox looks like it might be a bit slippery and may not offer the same protection.
Any advice welcome!
Click to expand...
Click to collapse
i bought the WorkMate over the weekend. love the case.
http://www.frys.com/product/7651437?site=sr:SEARCH:MAIN_RSLT_PG
super tough bounced across the floor a few times already and no scuffs or anything removes easy to change out the battery and/or SD card

Hey figsalan101,
Nick here form Cygnett, mate.
Sorry to hear about that the charger port isn't lining up correctly with the WorkMate Evolution, we have had a few reports of this happening.
The issue of the charging port has been fixed and all of the cases we are introducing into the market now are working correctly. You entitled to a refund or exchange at the point of purchase if you'd like to.
Regards,
Nick

I went for the black Cygnett Workmate Evolution in the end and love it - thanks for the advice.
The ports are all correct - I bought it directly from Cygnett's website and I guess they have fixed the issues with the earlier ones.
The buttons are still a little stiff even after a couple of weeks use.. but it's a small price to pay for the protection.
I have dropped it once already when getting out of my car. It bounced on my driveway a couple of time without any visible damage.
I still like my Spigen Neo Hybrid, Slim Armour and UAG Scout but none offer the protection I need at work... and excellent grip.