Unhappy Problem with SCHIST_21189
I
have flashed my schist rom 23034 with schist_21189 but the my phone is not working properly.the problems are as follows
1.phone starts very late.
2.if i keep it on the stand by mode and want to close the screen it wont do it.
3.with in 3 to 4 minutes of stand by mode the screen starts to wash out and turns white with nothing happening on it.no key will work in this stage.
4.the usb while starting gives the charging lite but when it starts the usb is not recognizable not by active sync.it wont work at any cost
please help me guys i am in BIG TROUBLE!!!!!!!!!!!!!!
Related
Hi mates, yesterday I've made a change for 7 inch galaxy tab 2, 8GB, more specially the p3110, as well as I rooted it and updatet it and about 6am insomnia makes me take the tablet, So far so ordinary ...
well then turn it on and tells me that my sd is empty Nothing, I lost the data and I am about to make clear the sd, pretends to format and passed 15-20 secs it power off.
I get out of bed and went to connect it to the wall charger, knowing as sometimes if you leave the battery holding power and swiping your finger across the screen some time reappears stack and reloads it, I do it today that should have full charge and nothing, doesn't returns, when I connect it usb pc and when I do turn on the tablet it sounds windows connected usb sound and at the second connecting it disconnects device again, and there will end up pressing the button again
I removed the back cover and I have even removed the battery about 2 hours, reassembled and still doing the same ....
Summary: Does not display anything on the screen and battery charging even having tried the method "samsung" when this happens, (which only have it, with its official android I had to do it once, and recalibrate the battery even reach 4000 and mark its 100%, hence looked last longer and it was when the update and was working fine about 3 hours with it, no problem opening emails looking face and such, nothing out of the ordinary, there is no heat either, doesn't gave any fatigue sign and the battery was at 80% when It turned off suddenly), when you turn the computer connected to the usb nothing still while connecting a second and off the next, only once, until you return to try give the power or any combination, whether recovery, download, nothing shows anything on the screen
however when I connect it to pc to it hears something in windows, that tells me that the board is not dead, and the lcd was working ok and absolutely have any shot.
can you think of anything? I'm already crazy with this ... odin doesn't sees it, that connects the second and still sounds the little sound of I connect I get disconnected every time you try to pull it out, hopefully a recoverable semibrick at home or less silly ...
still nothing??
HackerVR said:
Hi mates, yesterday I've made a change for 7 inch galaxy tab 2, 8GB, more specially the p3110, as well as I rooted it and updatet it and about 6am insomnia makes me take the tablet, So far so ordinary ...
well then turn it on and tells me that my sd is empty Nothing, I lost the data and I am about to make clear the sd, pretends to format and passed 15-20 secs it power off.
I get out of bed and went to connect it to the wall charger, knowing as sometimes if you leave the battery holding power and swiping your finger across the screen some time reappears stack and reloads it, I do it today that should have full charge and nothing, doesn't returns, when I connect it usb pc and when I do turn on the tablet it sounds windows connected usb sound and at the second connecting it disconnects device again, and there will end up pressing the button again
I removed the back cover and I have even removed the battery about 2 hours, reassembled and still doing the same ....
Summary: Does not display anything on the screen and battery charging even having tried the method "samsung" when this happens, (which only have it, with its official android I had to do it once, and recalibrate the battery even reach 4000 and mark its 100%, hence looked last longer and it was when the update and was working fine about 3 hours with it, no problem opening emails looking face and such, nothing out of the ordinary, there is no heat either, doesn't gave any fatigue sign and the battery was at 80% when It turned off suddenly), when you turn the computer connected to the usb nothing still while connecting a second and off the next, only once, until you return to try give the power or any combination, whether recovery, download, nothing shows anything on the screen
however when I connect it to pc to it hears something in windows, that tells me that the board is not dead, and the lcd was working ok and absolutely have any shot.
can you think of anything? I'm already crazy with this ... odin doesn't sees it, that connects the second and still sounds the little sound of I connect I get disconnected every time you try to pull it out, hopefully a recoverable semibrick at home or less silly ...
Click to expand...
Click to collapse
What exactly the problem?can you tell us in a lil bit short
post it in
GENERAL CHAT!! All XDA'ers Welcome (noobs included)
maybe this might help....discussing with others who faced the same....and how they solved it :fingers-crossed:
ask your problem in the above thread
and dont make a whole thread buddy....try keeping the general section clean
A co worker had her surface rt crash on updating and now its stuck at the booting surface screen.
I tried the steps I could find fiddling with the volume button and power button but it gets no where.
Honestly I have zero experience with these and normally use android.
Is there a way to connect this thing to a PC and push recovery files to it as it doesnt seem to want to see the recovery USB at all. It does know its there cause the power/reading light on the USB drive lights up.
Im trying another attempt at downloading and remaking the recovery USB just to see if I got a bad download but honestly wondering if this thing is toast. Just really trying to help them out cause it just ran out of warranty and MS wants to charge them 200$ to repair it.
Thanks
Hello there,
I would like to propose again this question, I summarize the problem of a Surface,
in my case a Surface 2 with Windows 8.1 RT stuck at the 'Surface Screen' and looping
in reboots alternating with the screen of 'preparing automatic repair', and then stuck.
If I reboot by holding down power button for 10 or 30 seconds, nothing changes and
the loop restarts by telling 'there is a problem screen', automatic reboot, 'Surface screen' and stuck.
I've tryed with 2 versions of the recovery image, an old one and one new, with two different
usb sticks. I've booted with "volume down" etc, the usb light flashes a couple of times but
the loop described above does not change.
Seems that many people out there suffer from the same problem, with almost all versions of the Surface, up to the Pro 4.
Many of them solved it with the usb recovery, but also a lot of them still have the same problem. Maybe we do something wrong
with the recovery files?
Any help is welcome, thanks for reading.
Try to keep the device on charge and leave it running for some hours, does it still stay stuck?
Hello Kephax,
I tried several times many strategies, even the one you suggested, nothing to do, always the same loop.
Hence I contacted Microsoft on 15th december, the support was very polite and efficient, in a week I was able to pack my device and give the pack to UPS. After 3 days, they returned me a new Surface2 for free.
I must say mine was only 6 months old, so warranty was still valid. On 24th december I was playing with the new device, so the whole procedure took 9 days. I am very happy.
However, I cannot say what was the fault of my Surface, a hardware problem or some updated went wrong? that's the question, I'm frightened that it was an update problem and that it can happen again to the new device. I can only guess it was a hardware problem because of the experience with the new device, less laggy, more fluid for graphics animations. Also the battery lasts longer.
I hope that this experience can help other user with same problem.
Best wishes for a happy new year,
dott_mat
Create a surface rt 8.1 bootable usb and boot from usb device.
If USB Device bootable, then first connect usb device, then press and hold vol down button, then press and release power button, when surface logo appears then release vol down button.
If all successful then surface will boot into recovery or directly boot from usb drive.
Hello, recently I started reading comics and found my old tab lying around so ill give it a go
First thing first it wont boot becaue it had no charge obviously (been there for like some years), then I tried to plug the charger but to no avail
I cleaned the contacts of the charger with a dry brush and start charging which then my tab starts charging!
when I booted, I think it was CM 12 (or 13? the one with andy I believe) and everything is force stopping.
I then tried to go to recovery mode and wipe data, but when i rebooted it it just stuck with the splash screen (the one before bootanimation)
I turned the tab off and tried to boot to download/recovery mode but it would just boot me right to the splash screen again, which mean i cant go to TWRP or ODIN.
And it doesn't always want to turn on, sometimes it just stuck there with black screen (not turned on) even if i press power/combo button, sometimes it pop up to the splash screen. what i notice is that i should wait for the charging indicator to show up before i can try to boot again (i got enough juice now, 56% the last time it turned on)
also one thing i remember is something about F2FS but im not sure what that is, but that might be a clue to my situation so ill just write this down here
Hi
Same here with P5110 and Slim7. I can't start it anymore....
I didn't use it for some time and then i charged it to 100% and it started but everything seemed to lag. Then i turned it off and wanted to look for another rom or a newer build. But i can't start it anymore. when i plug in the charger i can see the charging screen but beside of that i can do nothing. It has no effect when i push the on/off button or anything else...and it has to be at nearly 100%...
Idk how this happened..but for sure after the final update of android 11, While I was playing COD Mobile .. suddenly It sounded Like it's gonna blow for 10-15 seconds Continuously and then turned off automatically..and from then It's not Booting correctly..Sometimes After Pressing rapidly.its booting and also I could until next switching off..then again I have to do the same..I can understand the Bootloader got some problems unfortunately..and most of the time it shows "Waiting For Flashing Fulll Ramdump" with some Coding type of texts all over the phone...idk what happened.. some times it can be switched on and sometimes I have to Power on Rapidly but still It shows This problems or after turning on the display tears up & automatically turn off after that .....I need help to fix it..
Facing the same issue, I need help too, somebody fix this problem.
hi all, ive had my s7 for 3 years now, amazing phone, but a few weeks ago this freezing reboot problem appeared and idk whats going on, my phone isnt rooted, and ive never messed with custom OS or any of that, its on android 7 stock, the battery is still good, but im wondering if this freezing problem is software or hardware related, when it freezes and reboots it gets stuck on the first logo, if i dont force it to shut off it will stay that way or keep rebooting till it runs out of battery, so after i force it to shut off sometimes it reboots immediatly and sometimes it stays black for a while and boots randomly, i try to go into recovery menu and most times it freezes on no command screen and if i leave it there the phone gets incredibly hot, so i force shut it again and this time with the charger connected so it shows charging icon as if its shut down... i leave it for a while then turn it on and its working untill it freezes again... i am considering installing lineage os incase the firmware is corrupt but im not very familiar with all of this and after reading other posts where the user did way more complicated stuff and the problem maintained... im not sure if its really gonna work, so im looking for advice on here