Hello to everyone.I have an intenso tab714(or mediacom smartpad) and a huawei e3131 modem.When i connect it to my device i get the message ''Damaged usb storage'' and with ppp widget it does not recognise it....I go to setting->wirelless->more->3g support and this device is not supported by my tablet....Can anyone tell me how to connect it to the internet????Please help.Thank you!!!!!!!!!!
Hello all, I've been trying to root my Droid Maxx 4.4.4 SU6-7 and was working fine until after bricking it, I was unable to run the RUN_Root.bat. I'm running Windows 7 64 bit. This is the error I would get in the command prompt after trying to run RUN_Root.bat .
C:\Python27>python qdloadRoot.py MPRG8960.bin -ptf _root/partitions.txt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com9
Requesting Params...
Params:
Version: 8
Min version: 1
Max write size: 1536 (0x00000600)
Model: 144
Device size: Invalid or unrecognized Flash device, or Flash device programming not supported by this implementation
Device type: Intel 28F400BX-TL or Intel 28F400BV-TL
Requesting SoftwareVersion...
Version: PBL_DloadVER2.0
Requesting SerialNumber...
Serial number: 00,00,48,03
Requesting HW Id...
HW Id: 00,00,48,03,e1,10,7e,00
Requesting PublicKey...
PublicKey: 39,c4,ee,3e,b5,be,eb,87,8e,2f,e3,b8,53,4d,14,6f,91 ,ca,fd,bb,94,2a,0d,aa,d0,1e,b0,87,62,d4,b9,b8
Uploading file 'MPRG8960.bin' to addr 0x2a000000...
Executing...
Could not find Qualcomm device in Emergency download mode
Done, with errors!!!
C:\Python27>pause
Press any key to continue . . .
I can still use the USB I think. I see Qualcomm HS-USB Loader 9008 (COM9) in the device manager whenever I would plug in the USB and it was manually updated after I selected x64 folder from the windows_drivers_QHSUSB_DLOAD folder(windows would say it was up to date when selecting x64 folder). I tried different ports but the Port otion never shows up for them in the device manager. I'm also not using USB 3.0.
I believe I followed every other instruction as far as I know from this thread http://forum.xda-developers.com/droid-ultra/general/droid-mini-maxx-ultra-root-pogress-100-t3071609 I'd really appreciate if someone could help me out.
Phoop said:
Hello all, I've been trying to root my Droid Maxx 4.4.4 SU6-7 and was working fine until after bricking it, I was unable to run the RUN_Root.bat. I'm running Windows 7 64 bit. This is the error I would get in the command prompt after trying to run RUN_Root.bat .
C:\Python27>python qdloadRoot.py MPRG8960.bin -ptf _root/partitions.txt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com9
Requesting Params...
Params:
Version: 8
Min version: 1
Max write size: 1536 (0x00000600)
Model: 144
Device size: Invalid or unrecognized Flash device, or Flash device programming not supported by this implementation
Device type: Intel 28F400BX-TL or Intel 28F400BV-TL
Requesting SoftwareVersion...
Version: PBL_DloadVER2.0
Requesting SerialNumber...
Serial number: 00,00,48,03
Requesting HW Id...
HW Id: 00,00,48,03,e1,10,7e,00
Requesting PublicKey...
PublicKey: 39,c4,ee,3e,b5,be,eb,87,8e,2f,e3,b8,53,4d,14,6f,91 ,ca,fd,bb,94,2a,0d,aa,d0,1e,b0,87,62,d4,b9,b8
Uploading file 'MPRG8960.bin' to addr 0x2a000000...
Executing...
Could not find Qualcomm device in Emergency download mode
Done, with errors!!!
C:\Python27>pause
Press any key to continue . . .
I can still use the USB I think. I see Qualcomm HS-USB Loader 9008 (COM9) in the device manager whenever I would plug in the USB and it was manually updated after I selected x64 folder from the windows_drivers_QHSUSB_DLOAD folder(windows would say it was up to date when selecting x64 folder). I tried different ports but the Port otion never shows up for them in the device manager. I'm also not using USB 3.0.
I believe I followed every other instruction as far as I know from this thread http://forum.xda-developers.com/droid-ultra/general/droid-mini-maxx-ultra-root-pogress-100-t3071609 I'd really appreciate if someone could help me out.
Click to expand...
Click to collapse
Besides manually update the driver.
First, you have to disable the mandatory use of signed drivers in Windows.
Why? The driver you are trying to install (or update) is not signed and windows by default only allows the use of signed drivers.
Search a tutorial on "how to install an unsigned driver Windows 7"
I send you some, but I am the translator of google lol ..
I had a similar problem for the driver and the solution I gave you, solved my problem.
The best of luck, a big hug!
I managed to fix my problem yeasterday following br0adband advice in this thread http://forum.xda-developers.com/showpost.php?p=62651329&postcount=1159 sorry I forgot to close my thread(if I can figure out how). Thanks for that helpfull tip though, I'll keep that in mind for later driver issues.
Hi
Im trying to connect easycap to my photon q 4G LTE xt897, and i have some problems. Nothing works and im feel totally stupid
Some details:
Sim mod
CM 12.1-20160319-NIGHTLY-xt897
Android version: 5.1.1
Kernel: 3.0.101-g1a2acd3
EasyCap with utv007 chipset.
EasyCap Viewer
And that does not work. EasyCap Viewer showing: No device attached.
Next i installed Usb Host Controller, and it shows:
Version number: 0.44
S3C USB Host driver NOT found!
Root hub is not present, USB Host mode not active or not available!
USB Host Diagnostics shows:
ANDROID API
Claims support: Yes
Classes found: Yes
Device detected: No
ROOTED API
Claims support: N/A
Device detected: N/A
KERNEL
Claims support: Yes
Device detected: No
I found this topic http://forum.xda-developers.com/photon-q-4g-lte/development/cyanogenmod-12-1-photon-q-t3073781 and theres link to kernel. There is easycap in drivers/staging.
Now im stuck. Totally stuck, and dont know what to do next, to make this working...
Anyone, any advice?
Hello Every body
I have a Huawei USB dongle and I need to change IMEI via one of these methods: [AT Command / Diagnostic mode / QCDM Command]
I find a tool.exe to change it but I need to do it manually, also I run Serial Port Monitor to see what's the tool is doing ? I capture codes in HEX in Diag mode
Thanks all
----------------------------------------------------
Found Applications port COM4
Found Diagnostics port COM5
Found modem : E303
Model : Huawei E303
IMEI : ****************
Serial NR. : E9PBY*******
Firmware : 22.157.79.02.37
Compile date / time : Sep 5 2012 13:57:36
Hardware ver. : CH2E303SM
Dashboard version : HiLink12.012.02.03.37
Web UI version : HiLink12.012.02.03.37
Chipset : HiSilicon
Voice feature : not supported in current firmware
SIM Lock status : Locked (CardLock)
Wrong codes entered : 0 (unlock attempts left : 10)
===================================================================
XDA Visitor said:
Hello Every body
I have a Huawei USB dongle and I need to change IMEI via one of these methods: [AT Command / Diagnostic mode / QCDM Command]
I find a tool.exe to change it but I need to do it manually, also I run Serial Port Monitor to see what's the tool is doing ? I capture codes in HEX in Diag mode
Thanks all
----------------------------------------------------
Found Applications port COM4
Found Diagnostics port COM5
Found modem : E303
Model : Huawei E303
IMEI : ****************
Serial NR. : E9PBY*******
Firmware : 22.157.79.02.37
Compile date / time : Sep 5 2012 13:57:36
Hardware ver. : CH2E303SM
Dashboard version : HiLink12.012.02.03.37
Web UI version : HiLink12.012.02.03.37
Chipset : HiSilicon
Voice feature : not supported in current firmware
SIM Lock status : Locked (CardLock)
Wrong codes entered : 0 (unlock attempts left : 10)
===================================================================
Click to expand...
Click to collapse
Hi
Sorry to inform you but changing IMEI is illegal in most countries and you wont get help here on XDA
Thread closed
Hello!
As per the rules in this section i have tried searching for other USB tethering issues and I found this thread: https://forum.xda-developers.com/idol-3/help/usb-tethering-t3352376
His solution was to use easy tether, this can't work for me as I am tethering to a Router. I have tried clockwork-mod, PDA Net and easy tether, and they are not compatable with my ASUS RT-AC56R.
Here is some information about my Idol 3:
TWRP: LUX 3.0.2-r5 for Alcatel idol 3
Device Model: 6045O
CyanogenMod version: 12.1-20160715-UNOFFICIAL-idol3
Android Version: 5.1.1
Kernel Version:
3.10.49-gac18c2b-dirty
[email protected] #1
Sun Jul 3 17:00:27 CEST 2016
Build Number: cm_idol3-userdebug 5.1.1 LMY49j73aa3e58e3 test-keys
Partitions and Sizes ( from TWRP ):
Aboot(1MB), Boot(32MB), Recovery(32MB), System(771MB), Data(4386MB), Cache(0MB)
Modem(50MB), Modemst1(3MB), Fsg(1MB), Persist (0MB), Misc(1MB), Splash(16MB)
Hyp(0MB), Tz(0MB), Rpm(0MB), Sbl1(0MB)
Here is what works:
Bluetooth Tethering
WiFi HotSpot
Easy Tether to my PC
PDANet to my PC ( actually bought the app it works well in all other cases )
ClockWork-Mod tether to PC
What does not work is:
Native USB Tethering
SD card totally broke not even showing in TWRP
Specifically when i plug the phone into the router with MTP or PTP not charge only and attempt to toggle USB tethering it says "USB connected, Check to Tether" I tap the switch and it disappears for a second and then shows up again, not enabling USB tethering.
I don't know if i need to upgrade to a different ROM or if i need to re-flash the modem but any information, suggestions or thoughts on what I can do at this point will be greatly appreciated
ROM Problem. You'll have to upgrade.