Help i Think i Bricked my tf101 B60 - Eee Pad Transformer Q&A, Help & Troubleshooting

im stuck in a cwm 5.8.3.4 bootloop, cwm will not let me mount an sdcard, i cant boot into apx to nvflash, i tried to install jb aosp rom and its stuck at android logo so it wont boot... and i have no backups on the internal sd.....

papadunit said:
im stuck in a cwm 5.8.3.4 bootloop, cwm will not let me mount an sdcard, i cant boot into apx to nvflash, i tried to install jb aosp rom and its stuck at android logo so it wont boot... and i have no backups on the internal sd.....
Click to expand...
Click to collapse
That particular recovery won't ever let you into external memory card, you need to get back into stock that can done by using easy flash.. Use easy flasher to unroot and get back into stock ICS... then root and install some other recovery... you can find easy flasher thread under Eeepad android development thread.. I also suggest TWRP recovery... read all the instructions and use easy flasher... its pretty easy... follow the link below
http://forum.xda-developers.com/showthread.php?p=26893961
Sent from my Transformer TF101 using xda app-developers app

i have easy flasher ive tried many times to enter apx mode but cant....i have tried to plug my usb into three computers ......but it acts as if i never plugged in the usb at all..... i get no response from the compunters asking for driver information i have held vol + and power at the same time screen goes black but thats all it does....i dont know what else to do

papadunit said:
i have easy flasher ive tried many times to enter apx mode but cant....i have tried to plug my usb into three computers ......but it acts as if i never plugged in the usb at all..... i get no response from the compunters asking for driver information i have held vol + and power at the same time screen goes black but thats all it does....i dont know what else to do
Click to expand...
Click to collapse
Screen is and will be BLANK when in APX mode... APX mode is nvflash mode you won't see anything.. start the easy flash and start flashing stock ROM... YOU WILL SEE JUST 2 LINES ON YOUR TABLET if easy flasher is working and if its pushing required files.. if it doesn't then try removing and installing the required driver (naked driver)....
Sent from my Transformer TF101 using xda app-developers app

i seriously appreciate your help as your the only one who has responded as of yet....but what im saying is i understand that the screen will go blank when in apx mode....but when entering what i believe is apx mode my computer does not reconize that the transformer is plugged in at all......in control panel under usb there is no exclamation point warning me there is no drivers installed its as if i have not plugged in anything....

Same issue
I am in the exact same situation, flashed [ROM][JB][4.1.1] AOSP build #3 from here, same version of CWM Recovery. I have the AOSP Rom and a version of SMW touch still on my internal SD card but reflashing with various combinations of wiping data wasn't able to solve my issue. It will freeze on the "android" spash screen or on the "Optimizing android: starting apps". The CWM touch zip says it installs but the tablet still reboots into the 5.8.3.4 version.
I tried leaving it on both screens for several hours, but it never gets anywhere.
As far as APX mode, I have tried turning it off and holding the buttons, leaving it on and holding the buttons, various timings of holding the buttons as well as 2 different USB cables and 2 separate computers and a live CD of linux, but as far as I can tell, nothing recognizes the pad as being in APX mode. However, the screen does stay black, and it requires holding the power button down for ~20 seconds to see the ASUS splash screen again, after which it boots right to the useless recovery image. (Can't read external SD, tried formatting it FAT, FAT32, NTFS as well as different block sizes.)
I have another USB cable on the way, but the two I have were charging the pad as of 2 days ago, so I don't know how much issue that is. I have also reinstalled drivers several times and I must say I am about out of ideas.

Thats exactly my problem......but i dont think another cable will help.......was APX removed within an update?....
because it doesnt make any sense for APX mode to not work...

Without getting the transformer to be reconized in CWM or APX with a usb cable i think we may be sol...there is no other way to get another recovery or rom on the internal sd..

Yeah, the crappy thing is that it boots to recovery, so it's not like it's a completely dead. Feels like there's just something missing.

did you install the kernal with the aosp jb rom? im wondering if apx is written into the oem kernel and was taken out of the jb kernel..

The ROM has the new JB kernel incorporated into it, so it seems. You might be onto something about that, but from scanning the forums there were quite a few people who couldn't boot APX mode, and many of them just had faulty cables. I'm really hoping this 3rd cable works. I'll know in a week or so.

papadunit said:
i seriously appreciate your help as your the only one who has responded as of yet....but what im saying is i understand that the screen will go blank when in apx mode....but when entering what i believe is apx mode my computer does not reconize that the transformer is plugged in at all......in control panel under usb there is no exclamation point warning me there is no drivers installed its as if i have not plugged in anything....
Click to expand...
Click to collapse
Since laptop is not recognising the tablet in APX mode try this, plug it in APX mode and o to device manager of your laptop.... there it should show up under other peripheral devices or unknown devices Sopwith a exclamation symbol... right click and choose update/upgrade driver.. I suggest you download and unzip "naked driver" from the easy flasher forum..
Once its updated and driver is in place it should do the trick of recognizing in APX mode... try it.... I hope you understood
Sent from my Transformer TF101 using xda app-developers app

udupa82 said:
Since laptop is not recognising the tablet in APX mode try this, plug it in APX mode and o to device manager of your laptop.... there it should show up under other peripheral devices or unknown devices Sopwith a exclamation symbol... right click and choose update/upgrade driver.. I suggest you download and unzip "naked driver" from the easy flasher forum..
Once its updated and driver is in place it should do the trick of recognizing in APX mode... try it.... I hope you understood
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
It's not a driver problem, it seems to be a physical connection problem. There is NOTHING that appears on the computer. No connection sound, no unknown devices. Either our USB cables are bad or the device isn't entering APX mode.

It's strange that my USB cable is still charging the transformer....and before this it worked great for mass storage. I have a feeling you may have wasted money buying a new USB cable. As I don't believe that's the problem. I also think that APX isn't in the jb kernel wich means we cannot get any files to the internal sd or use easy flasher...
Sent from my EVO using xda app-developers app

I had ordered it as an extra before I even updated the device. I just don't see why the kernel wouldn't have APX mode. Maybe we could get someone else running this ROM to try APX mode? I can't post in the dev forum to see if maybe we did something incorrectly.

papadunit said:
It's strange that my USB cable is still charging the transformer....and before this it worked great for mass storage. I have a feeling you may have wasted money buying a new USB cable. As I don't believe that's the problem. I also think that APX isn't in the jb kernel wich means we cannot get any files to the internal sd or use easy flasher...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Nvflash is like fast boot you can't be removed by kernel... so its there and I know I can access it even though I'm using harmony kernel.... so don't give wrong info
Sent from my Transformer TF101 using xda app-developers app

IShotJFK said:
I had ordered it as an extra before I even updated the device. I just don't see why the kernel wouldn't have APX mode. Maybe we could get someone else running this ROM to try APX mode? I can't post in the dev forum to see if maybe we did something incorrectly.
Click to expand...
Click to collapse
Which ROM are you using ? I'm using AOSP JB running on harmony kernel and it works just fine... have you installed Asus sync and tried whether it recognized your tablet? Also try different USB port... you can always wait for new cable but mean there is no harm in trying different stuffs out... BTW if tablet is charging then cable is fine....
Sent from my Transformer TF101 using xda app-developers app

In my op I stated I've used 3 different computers to get the USB recognized nothing happens when I plug in USB...Apx mode is broke.
Sent from my EVO using xda app-developers app

The same happened to me and the only way out was to install the latest stock firmware from the Asus support site.
To do this all you need to do is the following...
Go to the Asus support site http://support.asus.com/Download/Options.aspx?SLanguage=en&type=1
Download the correct firmware for your device
Rename it to EP101_SDUPDATE.zip
Put it on your MicroSD card
Boot into Asus Recovery (by holding down the power and - buttons together and then +) and install the Firmware
Once it reboots, you'll have the latest,un-rooted stock Asus ICS 4.0.1 firmware.
I hope this works for you, It did for me.

holding down power -vol together brings up wipe data or android symbol.......nothing will read the sdcard with the update file in it....

Related

really bricked...... no dl mode .

ok so cant even get into dl mode its stuck at the screen with the phone exclamation point and computer ...... its is still read in odin on com port but it hangs at factoryrfs ...any help will be greatly appreciated i just bought this phone today thanks
Happens, that screen is another version of download mode. Just keep trying to odin it back to stock. It will work.
Sent from my SGH-I997 using XDA App
Alright here you go. Pull battery insert USB cable and battery while holding both volume buttons will bring up download mode then do your thing.
Sent from my SAMSUNG-SGH-I997 using XDA App
I had this same problem yesterday. If your computer detects your phone but not ODIN go to your device manager, click on samsung composite USB device and go to driver details and click update driver(via internet) it should update them and ODIN SHOULD detect it. Good luck
I had this problem yesterday trying to flash to stock. The first time I tried it said FAILED in odin. When I rebooted phone got the cartoon phone and computer icon. I just tried the same thing again and it worked. I don't know what happened either.
In my experience using a different USB cable than what Samsung supplies or having a flaky USB port can cause hit or miss Odin flashes.
I don't think it is possible to brick this phone from flashing. I've done pretty much everything you can possibly do wrong and both of mine still work fine and dandy.
It is possible to be in Download mode and never have anything even come up on the screen. If you are uncertain, listen for the sound your computer makes when you plug in a USB device or watch your device manager. Even if you don't have the driver installed something will most likely show up.

Transformer going insane

So, Recently a family member of mine told me something was wrong with their transformer. I take a look at it and it's not turning on so i assume it's not charged. I plug in the charger and it does not boot up. The transformer only goes to the eeepad screen with the asus logo and shuts off again. Basically it's in a bootloop but problem is, the tf101 is not rooted or tampered with and on stock fw (Tf101 is a b90 model) Anything i can do to fix??? Couldn't have been any sort of virus either as this transformer was only used for video streaming/ listening to music...
http://www.youtube.com/watch?v=DgCRfgGpwBw&feature=youtu.be
It might need to be reflashed. You could try using the wheelie tool, but the internal storage will be wiped. Sounds like a softbrick.
Sent from my Transformer TF101 using xda premium
I had exactly the same problem this week . . . this solved it:
http://forum.xda-developers.com/showthread.php?t=1620758
Reflash with NvFlash. Best idea as of now
Hey there,
I have nearly the same problem but my transformer just gets the first screen and then it tries to reboot.
I tried to reflash it with EasyFlasher but it didnt work. Is there a chance that your way will work?
If you can get ADB peri Might work, but just manually do it with NvFlash.
thanks, i'll try that when I hit back home in three days...
It is possible to get it in APX mode, so just put it on and flash?
Do you know why such a big problem occurs? It was on stock firmware and rooted for the last 5 months...
I'm starting to think my issue is related to condensation.
I started leaving the transformer in my bedroom, since my wife gave her tablet to her mother and is now using my transformer to read.
I was happy on HC, stock, non-rooted. My tablet was working with no issues for 3 months, give or take.
But then I started having random reboots and boot loops. Tried almost all roms for the transformer, same issue. Worked fine on the day I installed, got me bootloops the next day.
Today I thought about condensation after getting another round of boot loops and noticing my tablet screen with a bit of humidity. The temperature difference from my bedroom with A/C to my living room with no A/C can get to 15 or 20 celsius.
So I got the bootloop again today and instead of nvflashing the hell out of it as I have been doing, I put it in APX mode (since I have no recovery ATM, so I couldn't power it off) and leave it resting for 3 hours in room temperature. After that I rebooted it and it is now stable again. I will try to confirm those suspicious, but right now it sounds a lot like it for me. It never slept in the bedroom during the 3 months I was in HC.
theares2014 said:
thanks, i'll try that when I hit back home in three days...
It is possible to get it in APX mode, so just put it on and flash?
Do you know why such a big problem occurs? It was on stock firmware and rooted for the last 5 months...
Click to expand...
Click to collapse
I'm really not sure, but yes just download a stock nvflashable fw (xdafileserver.nl has some good ones) and put in nvflash mode and run reflash_sbkv#.bat (be sure to import wheelie into the stock fw folder and overwrite)
--
Regarding condensation, that's odd, but mabye. ..
Thanks, i'll try this when I am at home.
It is in APX mode but the computer doesnt recognise it... it says unknown device...
What shall i do?
That means the drivers are wrong/bad. Did you install any? You need the Universal Naked Drivers. (Search the tf themes and apps forum)
I installed the Asus PC Suite which means that drivers are inclueded, but I am going to search here if you say they are here.
Anyways, I can not find them there...
No, asus drivers is not what you need, you want the universal naked drivers: http://forum.xda-developers.com/showthread.php?t=1514942&highlight=universal+naked
well, that sounds quite nooby but how to install this drivers... i see several different files but absolutley no exe...
it is so embarrassing...
pnputil -a android_apxdriver.inf (or whatever the inf is called)
then plug in the tf
I opened it but nothing changes... the transformer in apx mode is still an unknown device
Have you tried 'update driver' in device manager, then point to the folder with the apx driver?
sure...
same problem with rebooting
I have exactly same problem...! My TF101 is B70 model and NVFlash not work with this model and higher... How I can fix it? is Megatron 1.1.6 installed on tablet and I have rom on sdcard, but reinstall rom not helped me, also wipe + reinsatll...
any ideas?
---------- Post added at 11:53 PM ---------- Previous post was at 11:06 PM ----------
http://forum.xda-developers.com/showthread.php?t=1688012
this is helped me...!!!

cant boot out of recovery

cant get passed recovery. tried TWRP, CWR, STOCK all the same result. tried installing backups same thing.
any help appreciated.
tried lgupdater too. starts, checks sw version, says there is an update avail, then starts the updater, when it gets to checking connection with phone it says cannot communicate with phone."diconnect cable, take out battery retry" heh, irritating
What do you mean when you say all recoveries fail? What steps have you taken exactly?
Just asking duo we can maybe figure out the problem
Sent from my LG-P999 using xda premium
To update via LG I found putting the phone in s/w update mode, then plugging it in to the computer, the most error-free way.
If everything fails look up the thread on restoring/flashing stock via nvflash. That'll work 100% unless you have a bad USB or bad drivers.
buru898 said:
To update via LG I found putting the phone in s/w update mode, then plugging it in to the computer, the most error-free way.
If everything fails look up the thread on restoring/flashing stock via nvflash. That'll work 100% unless you have a bad USB or bad drivers.
Click to expand...
Click to collapse
latest drivers from lg. good cable, tested
how would i put the phone in s/w upgrade mode before i plug it into computer. if i remove battery and hold vol up and down then connect usb it will go in s/w update mode when i start nvflash.
seems i cant start the phone with pwr + up /dwn vol buttons
rtotheichie said:
What do you mean when you say all recoveries fail? What steps have you taken exactly?
Just asking duo we can maybe figure out the problem
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
recoveries dont actually fail. each one i try lets me restore backups, flash roms. but they all wont boot the rom. they all just boot back into recovery.
this worked http://forum.xda-developers.com/showthread.php?t=1248644

Accidentally deleted boot partition

Hi guys, I really hope someone can help me.
I accidentally deleted the boot partition on my vodafone smart 2.
I was trying to install the original recovery that came with the phone before the OTA update2 using a tool from roeddie BUT, I forgot to put all the images in the same folder as the tool and the tool ended up deleting the boot partition without having a boot image to flash, and now I have a phone that is stuck in the white screen with the green android in the middle =(
btw, if I "reboot" if and quickly plug the usb cable in I get and unkown device in the device manager with this ID VID_0A5C&PID_2132&REV_0204
:crying::crying::crying:
With the program that you flashed it with can't you just download all the required sectors (boot, recovery, Rom) and just reflash?
Sent from my SGH-T999
No, the computer does not recognize the phone anymore =(
To my knowledge every Android phone has like a "apx or apb mode" or something of that nature(don't quote me on that lol) didn't you have to go on some sort of mode to use the application?
Sent from my SGH-T999
Yes, I had to power the phone holding volume down + power, but that won't work anymore =/
Ok now i had this happen to me with the Asus transformer tf 101 i flashed only the Rom and the tablet wouldn't even return on but it did go to apx mode, where the screen would show nothing, basically off, but with the right drivers my computer was able to recognize it and I flashed the boot.img, recovery.img, and Rom hopefully you should be able to do the same thing.
Sent from my SGH-T999
But the computer does not recognize the phone when I plug it, usually it shows something in the device manager, but now it shows nothing at all, except for when I quickly plug the usb cable right after it powers up, but apparently that hardware id is from some broadcom wireless something.
I don't know i never has experience with that phone , did you try to boot into recovery?
Sent from my SGH-T999
It was the first thing I tried, but I guess before it goes into recovery it needs the boot partition, which is gone.
I found this thread
http://forum.xda-developers.com/showthread.php?t=1144773
ALCATEL OT-980 /OT-981 recovery
On how to recover a bricked phone with "fast boot" hope that helps you good luck mate
Sent from my SGH-T999
Already tried this, does not work with this phone =(
But thanks for the effort.
I guess I'll have to go to the vodafone store in which I bought the phone and try to send it to repair.
Sorry man good luck
Sent from my SGH-T999
Just got home with my phone =)
Took the phone to a vodafone store at lunch, around 4pm got a text saying I could go and get my phone, I guess they have some mojo, voodoo or black magic to bring the dead back to life.
I think you probably messed up a step with the tutorial but at least you got the phone fixed how much did it cost you?
Sent from my SGH-T999
Nothing, it's still under warranty
Nice man congrats and if you try again make sure you have a recovery img available lol
Sent from my SGH-T999
having The same problem!
i'm also having the same problem with my xperia c3
it is bricked due to custom recoery and my boot partition has somehow deleted now i'm unable to boot up my phone any possible waysssssssss?:good:

[Q] stuck on lg screen on my lg g2x

i recently got into rooting and setting up my phone for new roms but im still new at it. i ended up bricking my phone to the lg screen with the blue swipe across the screen. my computer will not register the driver to use recovery flasher. i need help. anyone wanna help out a noob?
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
jj_z1 said:
Try using nvflash to revert back to 2.3.4 I can't give you a link but it's easy to find in the development section
Click to expand...
Click to collapse
i tried to use nv flash but no matter what i do i cant seem to make my phone register in the usb driver. if i could make it register i would be able to flash it then.
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
jj_z1 said:
Did you try using the kdz updater? it's a tricky method, but if you follow the guide properly you should be able to get it going
Click to expand...
Click to collapse
i dont know how to go about it.
laroacha said:
i dont know how to go about it.
Click to expand...
Click to collapse
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
jj_z1 said:
Never mind my last post, you need to be able to boot into a rom to use kdz updater, it's been a while since I had to do this kind of thing.
I'm pretty sure you only soft bricked your phone (i.e. it still turns on) and the only way, that I know of, is to use nvflash. I've had the same problem before, there could be many things that are causing the phone to not be recognized by your computer. Follow this guide http://forum.xda-developers.com/showthread.php?p=17258229
when you plug the usb into your phone make sure the audio on you computer is loud enough for you to hear that "usb recognized" sound. If you don't hear it, or it does not get recognized, try using a different usb port on your computer, believe me that actually worked for me a couple of times. Also, make sure you follow the steps very carefully because if you use the wrong button combination, or release the buttons too early, it won't work.
I wish I could help you more, but that's all i've got.
Good luck, and if by any chance you get it fixed, don't try to root your phone using any root tools, simply nvflash cwm recovery and flash your choice of a custom rom, that will automatically give you root privileges.
Click to expand...
Click to collapse
every time i look at my apx driver it always tells me to troubleshoot but it always says driver not installed. ive downloaded the same driver in different posts just to make sure but nothing helps. Wireless shops are useless. I live in vegas and there isnt a single store with a person smart enough to figure it out.lol. ive given my phone up for days at a time to shops who brag about "WE CAN FIX ANYTHING" they lied. well i guess im going to search for a few more hours on here to get some kind of lead. thanks for the help. if you kknow anything else or figure something out i would appreciate the help.
Have you tried this stuff?
http://forum.xda-developers.com/showthread.php?t=1619932
It sounds to me like your pc's jacked up the driver somehow. Try plugging in the phone with the battery out and holding all 3 buttons, go into your device manager and uninstall all the USB drivers. Then reboot and try following the apx driver installation procedure again.
Sorry if you tried all this stuff a million times already.
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
superhero7 said:
I would say the two things that I would focus on would be to first fix the drivers on your computer. I downloaded mine from the LG website. Next is to flash CWM Recovery so you can flash a rooted ROM to your phone. I would go back to the thread where you got the instructions to start flashing and ask the same questions but only after reading the whole thread. There the orig. developer might chime in and you'll have more specific answers focused on your specific issue.
It's true your phone isn't bricked and have patience and you'll get it fixed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Have you tried taking out your SIM card and micro SD card?
Usually right after I take them out and plug in my phone while holding volume up and volume down... it usually works after that.
Yup, that's my problem. No matter how many USB ports I tried it still wouldn't read it until I took out the SIM card and micro SD ;p.
Try this on for size...
laroacha said:
well i have all the drivers needed. and the computer is fine but the phone is not. i mean the pc doesnt quite read the phone right. with that being said i dont know how to flash cwm recovery to a phone my computer cant read. im running windows 7 64bit and all my usb drivers work fine.
Click to expand...
Click to collapse
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
RVD1 said:
Sounds like you are having the same the issues i was having with my phone why dont you try this..... First you have to flash a custom recovery image for your phone, follow all the procedures exactly then once you have flashed your CWM Recovery ( i. e. Clockworkmod recovery) Once you have installed that properly, you can now flash your new custom ROM and that should help to fully reboot your phone back to recovery for you to start using again....... hope that works for you.......just as it did for me have a good one!!... :fingers-crossed:
Click to expand...
Click to collapse
He can't flash anything to his phone -__- that's the problem we are all trying to solve.
May sound stupid, but have you tried different cords? Maybe your USB cord is bad. Just a thought.
Sent from my LG-P999 using xda premium
@op can you give us screenshots of:
A: what your device manager looks like when you plug your phone in not in apx mode.
And
B: When it is in apx mode.
To do this: right click on my computer>properties>on left hand side, click on device manager. Hit print screen, open paint and tell it to paste. Save and upload here.
Sent from my LG-P999 using xda premium
EEngineer said:
CWM = Clockworkmod Recovery (everyone remember this is a newbie).
Important question: Did you do a backup before making any changes to your phone?
Also, try this: remove your phone's battery for 30 seconds. Put the battery back in. Press and hold the volume down button, then press and hold the power button. Hold both buttons. First you'll see the white LG screen, then wait, when you next see the blue LG screen wait ONE second (no longer) then release the buttons. Tell us what the phone does then and what the screen says.
Click to expand...
Click to collapse
well i brought it to two shops and were both unsuccessful. wireless toyz and smart fix. i have it back and it goes to the lg screen. and instead of the second it flashes from black to a very dim gray back and forth. when i hold the power button along with the volume down it does a master reset and i can press the home button then it takes me to a screen to delete cache partition and what not and you move up and down with the volume keys but i cannot select anything. i think i really messed my phone up.
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Волк said:
Somehow you got stock recovery. Google for howbto do a master reset, on devices like the nexus tablet at my work there's a series of steps needed to do a full reset/restore. Just booting into stock recovery may not give you the option. As well, please post those screen shots as I said earlier, this way the issue with the USB can be troubleshot and maybe we can get you a fully working phone with CWM.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
idk how to post screenshots of my phone without a camera.lol. im about ready to give up. its been way too long with not having a phone.
You hit the print screen button, open paint, and tell it to paste/paste from clipboard.
Sent from my LG-P999 using xda premium

Categories

Resources