ASus Slider SL101 Boot issue - Eee Pad Transformer Q&A, Help & Troubleshooting

Hello,
I have had a Slider for a few months but just the other day it seems to have stopped working. I was in the process of wiping and factory resetting the device but now it seems to hang on boot at a screen that says:
Last time data wipe failed, continue to wiping data.
Please wait a few minutes....
Wipe-Data done.
And here it just sits forever showing the EEE Pad screen.
I'm not sure what happened to it. I have tried to do the Power + Volume Down and any other recovery steps and I even ran the ADB util to see if I could do something but ADB reports that the device file system is stuck in a "read-only" mode.
I've tried pushing new files to it via ADB in the hopes that it will get unstuck but it just says the file system is read-only and I can't seem to do anything with it.
Does anyone have some ideas on how I can get the device back to a working state?
Thanks very much for any help.
PK

Related

Stuck at "erasing" when doing a factory reset?

Anyone else had issues performing factory resets? My Nexus 5 seems incapable of completing it. So far I have tried doing a factory reset from the settings menu 4 times. Every single time it locks up on the erasing step. I don't mean it takes a little longer. I have let it sit for almost half an hour and the little android robot sits there taunting me.
Every time I have had to manually go into the bootloader and sideload a factory image, which works fine.
Any ideas why this problem is occurring? Faulty memory maybe?
Same issue here, phone is getting nice and warm but the little robot just sits there twiddling his antennae. Forced restart either normally or into recovery mode lands me right back on the erasing screen, looks like nothings going to happen unless I intervene another way. Any ideas?
Try pushing the system.img using fastboot. Might be best to start over and do a clean install.
Have you tried doing a factory reset in recovery instead?
Sent from my Nexus 5 using Tapatalk
Same problem
I have the same problem with the loop at the erasing screen. It will not go into recovery so that I can fix it. I tried flashing the Stock Rom again but no use. Please help me or at least give me some pointers what to try next.
jizkidjnr said:
Same issue here, phone is getting nice and warm but the little robot just sits there twiddling his antennae. Forced restart either normally or into recovery mode lands me right back on the erasing screen, looks like nothings going to happen unless I intervene another way. Any ideas?
Click to expand...
Click to collapse
martinancevski said:
I have the same problem with the loop at the erasing screen. It will not go into recovery so that I can fix it. I tried flashing the Stock Rom again but no use. Please help me or at least give me some pointers what to try next.
Click to expand...
Click to collapse
I have the same problem
I'm sure you wait a long time...but if not, mine probably took 10-15 minutes to finish...
Sent from my Nexus 5 using xda app-developers app
i have the same problem
What is your recovery? Version # also? How did you root? <--- this goes to the rest of you guys too because it seems like its happening to more than one person.
Follow this: Maybe flash the stock recovery found in here http://forum.xda-developers.com/showthread.php?t=2513701
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
^^ the command
edit: on second thought start over.
lpforte said:
Anyone else had issues performing factory resets? My Nexus 5 seems incapable of completing it. So far I have tried doing a factory reset from the settings menu 4 times. Every single time it locks up on the erasing step. I don't mean it takes a little longer. I have let it sit for almost half an hour and the little android robot sits there taunting me.
Every time I have had to manually go into the bootloader and sideload a factory image, which works fine.
Any ideas why this problem is occurring? Faulty memory maybe?
Click to expand...
Click to collapse
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
iori said:
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
Click to expand...
Click to collapse
ADB sideload: place the rom you want to flash in the fastboot folder and in the phones recovery select adb sideload, then on the pc in cmd type: adb sideload namerom.zip and it will start flashing.
gee2012 said:
ADB sideload: place the rom you want to flash in the fastboot folder and in the phones recovery select adb sideload, then on the pc in cmd type: adb sideload namerom.zip and it will start flashing.
Click to expand...
Click to collapse
thanks
but i finally found out that the stock recovery was somehow corrupted after factory reset
then I unlocked the bootloader and flashed TWRP recovery, and voila! my device booted normally
Nexus 5 hung at reset
iori said:
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
Click to expand...
Click to collapse
Exactly the same problem here. Nexus 5 running 4.4.2 kept powering off randomly roughly once a day. Attempted a factory reset and it got stuck at erasing. Having unlocked the bootloader and following the steps to unlock and reboot, I have a progress bar with the animated android icon, apparently stuck at the same stage, but without the "erasing" caption.
As far as I'm concerned, I can nothing with the phone at present short of taking it back, though they'll likely take issue with my attempts to rectify myself
mannschaftpag said:
Exactly the same problem here. Nexus 5 running 4.4.2 kept powering off randomly roughly once a day. Attempted a factory reset and it got stuck at erasing. Having unlocked the bootloader and following the steps to unlock and reboot, I have a progress bar with the animated android icon, apparently stuck at the same stage, but without the "erasing" caption.
As far as I'm concerned, I can nothing with the phone at present short of taking it back, though they'll likely take issue with my attempts to rectify myself
Click to expand...
Click to collapse
I'll add that I've also tried the Nexus Root Toolkit v1.8.0 to flash stock. Appears to go fine, recreating the file system and loading software, then as soon as it gets to the "erasing cache" step it just sits there for hours and makes no progress.
I know I probably shouldn't promote toolkits but you can always try this. Seems to have worked for a lot of people.
http://forum.xda-developers.com/showthread.php?t=2513937
Sent from The Deathstar
Same thing happened to me yesterday. My N5 is rooted, running stock rom and recovery. I had some corrupted app date showing in Titanium that I could not remove that were causing a Play store issue for me. I backed up my phone with TB and ran a factory reset in settings. The phone was stuck on the 'erasing' screen for maybe 20 minutes, so I put the phone in fastboot and from there back into recovery. This took me back to the 'erasing' screen to my dismay. I put the phone down and started searching for a solution online, but then I noticed after about 7 minutes the erase process had finally finished on its own and the phone rebooted normally again.
Based on what others are saying in this thread it appears the factory reset process via settings or stock recovery can hang sometimes. If you power off, start the phone in fastboot and select recovery again, I'm guessing the factory reset process restarts and hopefully it will then work properly the next time, like it did for me.
Well when I did a factory reset from settings, it took nearly 20-25 minutes to finish. The next time I did a reset, it completed within 10 minutes
I guess this problem occurs randomly.
Be patient
My guess is that you just need to be patient -- my device took nearly 45 minutes to reset. It seems to me that the time required is proportional to either the amount of data or the number of files you have on the device. My device had a mix of large files (such as musics and photos) and many many small files (sensor data log files), so it's hard for me to say which of those contributed more to the long reset time.
Based on what others are saying in this thread it appears the factory reset process via settings or stock recovery can hang sometimes. If you power off, start the phone in fastboot and select recovery again, I'm guessing the factory reset process restarts and hopefully it will then work properly the next time, like it did for me.
Click to expand...
Click to collapse
This worked for me too. On the initial 'Return to factory defaults' it got stuck for about 45 minutes. I then follow the advice above:
- Put the N5 in Fastboot by pressing: Vol. Up + Vol. Down + Power
- Select: Recovery and press on Power to proceed
- Phone reboots, still into the 'Androidman' but it seems that the 'Return to factory defaults' also restarts.
- Wait about 10 minutes and the Phone powers down automatically. Upon startup you enter the 'Initial configuration menu' so the factory reset has been completed.
Still stuck on Erasing screen, running out of options
Hello,
I am a newbie with zero developer knowledge and received my Nexus 5 in the mail yesterday. I liked the phone specs and that is the only reason I got it. I left it alone while it charged up and the first thing I did once it was finished was perform a Factory Reset (it was a "like new" phone so I just wanted to be safe) and have been stuck on the Erasing screen ever since. Pressing Vol- and Power button does take me to the bootloader screen, however, any option I choose by pushing the power button, such as Recovery Mode, sends me back to the Erasing screen. Pushing Vol+, Vol-, and Power shuts the phone off completely. Holding the Power button down does nothing more than restart the phone into the Erasing screen. I have also let the phone die twice and as soon as it has enough juice to come back on, it goes straight to the Erasing screen. Everything on the phone is stock and it is completely unrooted. The bootloader screen also indicates it is unlocked. I have attempted to flash it as per instructions I have found on here but I am unable to download the stock factory images. It gets to about 90% before the install fails and I have tried to install three times already. I do have the 15 Second ADB installed, however. I assumed the install of the factory images failed because I don't have WiFi and I'm running completely off of limited 3G data (I live in the middle of no where with no high speed internet to speak of). So in lieu of all that I have attempted, is there ANYTHING at all that can be done to get the phone off of this Erasing screen? Or do I just need to try and return it because it's useless at this point? I did at first let the process run but it's now been 24 hours stuck on this Erasing screen with no improvement. I'm fairly certain it runs KitKat 4.4.0.

[Q] Hard Bricked, Security Error Boot Loop D800 after Lollipop OTA attempt.

Hey XDA,
I have a D800 that is totally stock. I have no custom recovery, and have never rooted the device.
A couple days ago I got the notification for an OTA update. I hit the notification, and rebooted the phone. It started the update process. It got through the first step. When it started the second part of the update, a black box popped up, and a code like "ERR 0x04ff" or something like that popped up. The phone rebooted, and got stuck in a boot loop with a "Security Error." The phone will boot up, show the LG logo, then show a slightly different LG logo with "Security Error" underneath it, then reboot and start the process over. I started messing around with the power button and volume keys to see what different modes I could boot it into. Initially I could boot it to the Factory data reset screen, the Hardware Mode Keys screen, and I got it into Download mode once. I didn't have any of the software or files available at the time to do anything with Download mode, so I opted to try a Factory reset. The phone attempted a Factory Reset. The little android with wiggly ears, and the spinny cube thingy popped up for about 4 seconds, and the phone rebooted.
Since trying that initial Factory Reset, I have been unable to get the phone into Download mode. I've tried doing the Factory Reset multiple times to no avail. I have not seen fastboot at all.
At this point, the only thing I can do with the phone is boot it to the Factory Data Reset screen, and to the Hardware Keys Mode screen. It will not do a factory reset. The android pops up for about 1-2 seconds, and the phone reboots, and goes right back to the boot loop with the security error.
I'm at a loss at this point. I've called AT&T, and unfortunately my phone is out of warranty by about 3 weeks. So they can't just mail me a replacement. Does anyone have any ideas? I can't seem to get it to be recognized by my PC, on Windows or Ubuntu. I get the feeling that it's just hard bricked, and there really isn't anything else I can try.
Any suggestions would be greatly appreciated
TL-DR: Totally stock D800, no custom recovery or root. Security Error Boot Loop after OTA attempt. No download mode or fastboot, factory reset is ineffective. Not recognized by PC. What do I do now?
bob51dole said:
Hey XDA,
I have a D800 that is totally stock. I have no custom recovery, and have never rooted the device.
A couple days ago I got the notification for an OTA update. I hit the notification, and rebooted the phone. It started the update process. It got through the first step. When it started the second part of the update, a black box popped up, and a code like "ERR 0x04ff" or something like that popped up. The phone rebooted, and got stuck in a boot loop with a "Security Error." The phone will boot up, show the LG logo, then show a slightly different LG logo with "Security Error" underneath it, then reboot and start the process over. I started messing around with the power button and volume keys to see what different modes I could boot it into. Initially I could boot it to the Factory data reset screen, the Hardware Mode Keys screen, and I got it into Download mode once. I didn't have any of the software or files available at the time to do anything with Download mode, so I opted to try a Factory reset. The phone attempted a Factory Reset. The little android with wiggly ears, and the spinny cube thingy popped up for about 4 seconds, and the phone rebooted.
Since trying that initial Factory Reset, I have been unable to get the phone into Download mode. I've tried doing the Factory Reset multiple times to no avail. I have not seen fastboot at all.
At this point, the only thing I can do with the phone is boot it to the Factory Data Reset screen, and to the Hardware Keys Mode screen. It will not do a factory reset. The android pops up for about 1-2 seconds, and the phone reboots, and goes right back to the boot loop with the security error.
I'm at a loss at this point. I've called AT&T, and unfortunately my phone is out of warranty by about 3 weeks. So they can't just mail me a replacement. Does anyone have any ideas? I can't seem to get it to be recognized by my PC, on Windows or Ubuntu. I get the feeling that it's just hard bricked, and there really isn't anything else I can try.
Any suggestions would be greatly appreciated
TL-DR: Totally stock D800, no custom recovery or root. Security Error Boot Loop after OTA attempt. No download mode or fastboot, factory reset is ineffective. Not recognized by PC. What do I do now?
Click to expand...
Click to collapse
Try this guide, it should help. Good luck.
http://forum.xda-developers.com/showthread.php?t=2662445
Sent from my LG-D800
Swetnes said:
Try this guide, it should help. Good luck.
http://forum.xda-developers.com/showthread.php?t=2662445
Sent from my LG-D800
Click to expand...
Click to collapse
Thanks for the reply. I was about to reply saying my phone wouldn't go into download mode, but then I randomly decided to use a different usb port, and now it went into download mode.
I'll give it a shot now and see what i can do
Ok, It seems I'm back up and running. I followed this guide http://forum.xda-developers.com/showthread.php?t=2432476 which re-flashed me to 4.2.2. I'm going to try and upgrade using LG PC Suite from my laptop, and see if I have better luck this time.
Lesson learned, try every USB port when trying to boot into download mode.
Thanks for the help

Stuck at cyanogenmod animation

Hello,
I am brand new to this forum and to android problems.... so forgive "silly questions".
I got a used tf300t which was reset back to factory settings.
I installed the dolphin browser and the last thing I did was installing the opera mobile browser.
Since that the cyanogenmod animation pops up right at the boot process and now and then it finishes booting, but when I wipe the screen in order to unlock it the cy-animation appears again.
Yesterday I got an error message that a system process was shutdown with a java null pointer exception for ..... any language process. (did not note the error message unfortuanately).
This brought to my mind that I changed some keyboard setting for the german keyboard layout and this is very likely the cause of the problem.
Now I wanted to reset the device back to it's factory settings, but I cannot boot into the recovery mode. Pressing power- and volume down button just flashes the screen with the asus logo but when I release the buttons, the cyanogenmode animation again appears.
So how can I "hard-reset" the device and btw. is this cyanogenmod thing really necessary?
thanks a bunch in advance and cheers
sabine
update: can now boot into TWRP
update#2: I killed it
I used the wipe option (think it was called this way) for a factory reset - and now it is stuck at the asus logo while booting.
Connect to a PC with cable, see if ADB recognizes it.
If it does, issue (in terminal/command line):
Code:
adb reboot bootloader
Wait for it reboot.
Verify fastboot connection
Code:
fastboot devices
If it is recognized, you need to re-flash latest stock firmware (blob), that can be found on Asus website. Make sure you get the right (geo)version for your device (ie: US/JP/WR...)
To flash the stock firmware, find the directions on this forum.
Sent from my TF300T using Tapatalk
sorry for the delayed answer, but thank you soooo much, I will try it out immediately. However befor I got that troubles I connected it to a PC but it did't get recognized.
Well we'll see...
to be continued
I got it, I got it, I got it
the problem was a different one called cyanogenmod.
When resetting the device the cyanogenmod got uninstalled and therefore restarting was not possible.
I found a backup file of the cyanogenmod and reinstalled it ... and it works
thanks a bunch for your help

My Google Pixel seems bricked - Could someone confirm there is nothing I can do ?

Hi, here's a description of what happened, what I did to solve my problem, and where I am now...
I left my Google Pixel and 2 hours later found it stuck into a booting loop (Google logo displayed > black screen > Google logo displayed > blackscreen...).
I first entered fastboot and tried to power off, restart, etc a few times, but it stayed stuck into the booting loop.
So I downloaded latest OTA from Google for my phone (my phone was already updated to the latest version via the phone update manager, which goes back to december 2019 I think).
I first verified that my linux pc could correctly see the devices, and then from fastboot I entered recovery mode and chose "Apply update from ADB".
I used the adb command to load the OTA I had downloaded.
The update progressed until it finished with the following error message :
Code:
install from ADB completed with status 1
Installation aborted
E:Failed to clear BCB messages: failed to write /dev/block/platform/soc/62400.ufshc/by-name/misc: I/O error
I was back on the recovery menu screen, and this is where I think I did something stupid : I selected "Reboot system now".
The phone did not reboot, the screen just went black and stays black. The phone is cold so I guess not running anything. And it does not respond to any button, so not starting up, no fastboot, etc. No more when I connect it to a PC or plug it in a power plug.
I don't really care about the phone, I was just trying to get back my picture/videos from the last 6 months.
I don't have much hope but I will appreciate any help, even if its just to confirm that there is nothing to do
rraphrr said:
Hi, here's a description of what happened, what I did to solve my problem, and where I am now...
I left my Google Pixel and 2 hours later found it stuck into a booting loop (Google logo displayed > black screen > Google logo displayed > blackscreen...).
I first entered fastboot and tried to power off, restart, etc a few times, but it stayed stuck into the booting loop.
So I downloaded latest OTA from Google for my phone (my phone was already updated to the latest version via the phone update manager, which goes back to december 2019 I think).
I first verified that my linux pc could correctly see the devices, and then from fastboot I entered recovery mode and chose "Apply update from ADB".
I used the adb command to load the OTA I had downloaded.
The update progressed until it finished with the following error message :
Code:
install from ADB completed with status 1
Installation aborted
E:Failed to clear BCB messages: failed to write /dev/block/platform/soc/62400.ufshc/by-name/misc: I/O error
I was back on the recovery menu screen, and this is where I think I did something stupid : I selected "Reboot system now".
The phone did not reboot, the screen just went black and stays black. The phone is cold so I guess not running anything. And it does not respond to any button, so not starting up, no fastboot, etc. No more when I connect it to a PC or plug it in a power plug.
I don't really care about the phone, I was just trying to get back my picture/videos from the last 6 months.
I don't have much hope but I will appreciate any help, even if its just to confirm that there is nothing to do
Click to expand...
Click to collapse
Well you could try and see if the phone is in deep flash mode, if it is flash system, boot and other sensitive partitions but make sure that the versions are the same. If you don't have the firmware you can pull user data partition from phone and get your data back that way
muhammad42620 said:
Well you could try and see if the phone is in deep flash mode, if it is flash system, boot and other sensitive partitions but make sure that the versions are the same. If you don't have the firmware you can pull user data partition from phone and get your data back that way
Click to expand...
Click to collapse
Thanks for your help. This is probably beyond my capabilities. I don't know how to check if it's in deep flash mode. Pulling the data out is what I'm interested in most.
Maybe this is something that a phone repair shop is able to do...
rraphrr said:
Thanks for your help. This is probably beyond my capabilities. I don't know how to check if it's in deep flash mode. Pulling the data out is what I'm interested in most.
Maybe this is something that a phone repair shop is able to do...
Click to expand...
Click to collapse
These phones get emmc errors. Common issue with this device

Update 11.1.1.1 installed successfully on OP 6T but is stuck in loading

Hello,
Anyone else having problems after this update? I did it now and my phone does not start anymore. Or at least it hangs in the loading screen with the red and 2 white dots.
I shut it down with power and vol + twice but with no effect. It does not react on the power cable being inserted. When it's powered off and I insert the cable it starts to the loading screen, currently showing 14 %.
How to solve this?
Thank you!
I can boot into recovery or fastboot. Not sure how helpful that is though.
try to format data if you're able to go to recovery. as long you have recovery and fastboot intact, it's basically not ****ed up yet
dewa5227 said:
try to format data if you're able to go to recovery. as long you have recovery and fastboot intact, it's basically not ****ed up yet
Click to expand...
Click to collapse
But how can I save my data? I mean when I'm in recovery I have to enter the password before, so the data gets decrypted. But with USB attached I can only see 5 files on my desktop computer.
I emptied the battery and loaded it fully, then restarted. After a long time it say "This device has entered an unstable state. Please try rebooting your device using the exit button below..." and so on.
I hope a data recovery company isn't the only solution.
Also, is there no way to repair it? Like running the update again or something?
Why is there no „apply update from adb“ option in the recovery menu of OnePlus? Apparently I could have used that to backup all my data from the phone.
I tried wiping the cache partition without success so far.
So did Android squeeze security so much that not even the owner can save his data in this status now anymore? A bit sad when they themself break the phone with an update then.
What about these recovery services that also recover data from harddrives? Do they break the phone when they do their thing?

Categories

Resources