My Google Pixel seems bricked - Could someone confirm there is nothing I can do ? - Google Pixel Questions & Answers

Hi, here's a description of what happened, what I did to solve my problem, and where I am now...
I left my Google Pixel and 2 hours later found it stuck into a booting loop (Google logo displayed > black screen > Google logo displayed > blackscreen...).
I first entered fastboot and tried to power off, restart, etc a few times, but it stayed stuck into the booting loop.
So I downloaded latest OTA from Google for my phone (my phone was already updated to the latest version via the phone update manager, which goes back to december 2019 I think).
I first verified that my linux pc could correctly see the devices, and then from fastboot I entered recovery mode and chose "Apply update from ADB".
I used the adb command to load the OTA I had downloaded.
The update progressed until it finished with the following error message :
Code:
install from ADB completed with status 1
Installation aborted
E:Failed to clear BCB messages: failed to write /dev/block/platform/soc/62400.ufshc/by-name/misc: I/O error
I was back on the recovery menu screen, and this is where I think I did something stupid : I selected "Reboot system now".
The phone did not reboot, the screen just went black and stays black. The phone is cold so I guess not running anything. And it does not respond to any button, so not starting up, no fastboot, etc. No more when I connect it to a PC or plug it in a power plug.
I don't really care about the phone, I was just trying to get back my picture/videos from the last 6 months.
I don't have much hope but I will appreciate any help, even if its just to confirm that there is nothing to do

rraphrr said:
Hi, here's a description of what happened, what I did to solve my problem, and where I am now...
I left my Google Pixel and 2 hours later found it stuck into a booting loop (Google logo displayed > black screen > Google logo displayed > blackscreen...).
I first entered fastboot and tried to power off, restart, etc a few times, but it stayed stuck into the booting loop.
So I downloaded latest OTA from Google for my phone (my phone was already updated to the latest version via the phone update manager, which goes back to december 2019 I think).
I first verified that my linux pc could correctly see the devices, and then from fastboot I entered recovery mode and chose "Apply update from ADB".
I used the adb command to load the OTA I had downloaded.
The update progressed until it finished with the following error message :
Code:
install from ADB completed with status 1
Installation aborted
E:Failed to clear BCB messages: failed to write /dev/block/platform/soc/62400.ufshc/by-name/misc: I/O error
I was back on the recovery menu screen, and this is where I think I did something stupid : I selected "Reboot system now".
The phone did not reboot, the screen just went black and stays black. The phone is cold so I guess not running anything. And it does not respond to any button, so not starting up, no fastboot, etc. No more when I connect it to a PC or plug it in a power plug.
I don't really care about the phone, I was just trying to get back my picture/videos from the last 6 months.
I don't have much hope but I will appreciate any help, even if its just to confirm that there is nothing to do
Click to expand...
Click to collapse
Well you could try and see if the phone is in deep flash mode, if it is flash system, boot and other sensitive partitions but make sure that the versions are the same. If you don't have the firmware you can pull user data partition from phone and get your data back that way

muhammad42620 said:
Well you could try and see if the phone is in deep flash mode, if it is flash system, boot and other sensitive partitions but make sure that the versions are the same. If you don't have the firmware you can pull user data partition from phone and get your data back that way
Click to expand...
Click to collapse
Thanks for your help. This is probably beyond my capabilities. I don't know how to check if it's in deep flash mode. Pulling the data out is what I'm interested in most.
Maybe this is something that a phone repair shop is able to do...

rraphrr said:
Thanks for your help. This is probably beyond my capabilities. I don't know how to check if it's in deep flash mode. Pulling the data out is what I'm interested in most.
Maybe this is something that a phone repair shop is able to do...
Click to expand...
Click to collapse
These phones get emmc errors. Common issue with this device

Related

[Q] Bricked TF700 when trying to install TWRP

Current Status of my TF700:
-Boot looping with Asus "Inspiring Innovation - Persisten Perfection" logo. Approximately 5 seconds between reboots, with a vibrate every time it reboots.
-It says "Device is Unlocked" in the top left.
-Holding power for a long time (over 20s) will shut it off, and vibrate, but then it immediately vibrates again and resumes the bootloop.
-I cannot get it into the bootloader with Power + Vol Down. That combination does nothing.
-If I use the pinhole button, as long as I hold it, the screen remains blank. As soon as I release it again, the bootloop resumes immediately.
-It does not get to the second "shiny" Asus logo.
-It doesn't get far enough to recognize a new firmware file on the microSD card.
How I got to this point:
Stock ever since I bought it up until a few days ago. I decided it was time to root, unlock, install TWRP, and install CWM. I never got that far.
1. I unlocked first. I believe it was successful because it has said "Device is Unlocked" ever since.
2. I tried to root with the debugfs method. It reported it was successful, but despite several attempts, it was unsuccessful.
3. I tried using GooManager to install TWRP. It never worked.
4. I discovered that I wasn't running the latest Asus firmware. I then upgraded it. It ran successfully. (V10.6.1.14.10)
5. I tried rooting with Motochopper. It reported success. But it didn't work. I then discovered it wouldn't work with V10.6.1.14.10.
6. I then tried installing TWRP via fastboot. It reported success, but Power+VolDown didn't get me into TWRP. Nothing seemed to load TWRP. In case it's relevant, I was having trouble where Windows was saying there was a problem with the Bootloader Interface Driver, and after several reboots, I was able to get fastboot to reportedly load TWRP. It reported success, but I never saw TWRP.
7. I booted into Recovery, the latest version that said something to the effect of, "USB recovery loaded" or something, with 3 icons: RCK, Android, and Wipe Data. This is the only recovery I was ever able to see, by the way. I then selected "Wipe Data" hoping it would give me a new starting point.
Once it rebooted, it has been stuck in this bootloop. Have I royally screwed myself, or is there a way to recover?
Please ask any questions, I will answer them to the best of my ability. In the meantime, I will hope to run the power down on the tablet in the hopes it will make a difference.
blauciel said:
6. I then tried installing TWRP via fastboot. It reported success, but Power+VolDown didn't get me into TWRP.
....
7. I booted into Recovery, the latest version that said something to the effect of, "USB recovery loaded" or something, with 3 icons: RCK, Android, and Wipe Data. This is the only recovery I was ever able to see, by the way.
Click to expand...
Click to collapse
Power+VolDown activates the bootloader menu - this is the screen with the 3 icons, where you can use fastboot. Since you needed to go there to install TWRP via fastboot, you should have known that Power+VolDown doesn't get you into TWRP - you'd have to press VolUp in the bootloader menu, to activate RCK.
blauciel said:
I then selected "Wipe Data" hoping it would give me a new starting point.
Once it rebooted, it has been stuck in this bootloop. Have I royally screwed myself, or is there a way to recover?
Click to expand...
Click to collapse
Selecting "Wipe data" from the bootloader menu with a broken recovery is the best known way to brick a TF700. This can only be recovered via nvflash, which you can't use since you never got far enough to extract the required files from your tablet while it still worked. Your only option now is a new mainboard.
Well, crap. RCK never did anything except show a loading bar then reboot.
Thanks for the reply.
...from my phone...
Anyone know of a place that sells 64gb mainboards? Not finding anything thus far...
...from my phone...
in case anyone cares, I swapped the motherboard out with one from ebay, and it booted right up.

Stuck at "erasing" when doing a factory reset?

Anyone else had issues performing factory resets? My Nexus 5 seems incapable of completing it. So far I have tried doing a factory reset from the settings menu 4 times. Every single time it locks up on the erasing step. I don't mean it takes a little longer. I have let it sit for almost half an hour and the little android robot sits there taunting me.
Every time I have had to manually go into the bootloader and sideload a factory image, which works fine.
Any ideas why this problem is occurring? Faulty memory maybe?
Same issue here, phone is getting nice and warm but the little robot just sits there twiddling his antennae. Forced restart either normally or into recovery mode lands me right back on the erasing screen, looks like nothings going to happen unless I intervene another way. Any ideas?
Try pushing the system.img using fastboot. Might be best to start over and do a clean install.
Have you tried doing a factory reset in recovery instead?
Sent from my Nexus 5 using Tapatalk
Same problem
I have the same problem with the loop at the erasing screen. It will not go into recovery so that I can fix it. I tried flashing the Stock Rom again but no use. Please help me or at least give me some pointers what to try next.
jizkidjnr said:
Same issue here, phone is getting nice and warm but the little robot just sits there twiddling his antennae. Forced restart either normally or into recovery mode lands me right back on the erasing screen, looks like nothings going to happen unless I intervene another way. Any ideas?
Click to expand...
Click to collapse
martinancevski said:
I have the same problem with the loop at the erasing screen. It will not go into recovery so that I can fix it. I tried flashing the Stock Rom again but no use. Please help me or at least give me some pointers what to try next.
Click to expand...
Click to collapse
I have the same problem
I'm sure you wait a long time...but if not, mine probably took 10-15 minutes to finish...
Sent from my Nexus 5 using xda app-developers app
i have the same problem
What is your recovery? Version # also? How did you root? <--- this goes to the rest of you guys too because it seems like its happening to more than one person.
Follow this: Maybe flash the stock recovery found in here http://forum.xda-developers.com/showthread.php?t=2513701
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
^^ the command
edit: on second thought start over.
lpforte said:
Anyone else had issues performing factory resets? My Nexus 5 seems incapable of completing it. So far I have tried doing a factory reset from the settings menu 4 times. Every single time it locks up on the erasing step. I don't mean it takes a little longer. I have let it sit for almost half an hour and the little android robot sits there taunting me.
Every time I have had to manually go into the bootloader and sideload a factory image, which works fine.
Any ideas why this problem is occurring? Faulty memory maybe?
Click to expand...
Click to collapse
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
iori said:
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
Click to expand...
Click to collapse
ADB sideload: place the rom you want to flash in the fastboot folder and in the phones recovery select adb sideload, then on the pc in cmd type: adb sideload namerom.zip and it will start flashing.
gee2012 said:
ADB sideload: place the rom you want to flash in the fastboot folder and in the phones recovery select adb sideload, then on the pc in cmd type: adb sideload namerom.zip and it will start flashing.
Click to expand...
Click to collapse
thanks
but i finally found out that the stock recovery was somehow corrupted after factory reset
then I unlocked the bootloader and flashed TWRP recovery, and voila! my device booted normally
Nexus 5 hung at reset
iori said:
hello
I have the same exact problem
I'm completely stock and I want to reset all so I do factory reset from menu setting, backup & reset
And since, my nexus stucked in "erasing...."
I have tried flashing factory image according to this guide, succeeded, but then still stucked in android logo with endless progress bar (but this time without "erasing....")
Need help how to restore it
All I want is to factory reset
How did you actually sideload factory image?
thanks
Click to expand...
Click to collapse
Exactly the same problem here. Nexus 5 running 4.4.2 kept powering off randomly roughly once a day. Attempted a factory reset and it got stuck at erasing. Having unlocked the bootloader and following the steps to unlock and reboot, I have a progress bar with the animated android icon, apparently stuck at the same stage, but without the "erasing" caption.
As far as I'm concerned, I can nothing with the phone at present short of taking it back, though they'll likely take issue with my attempts to rectify myself
mannschaftpag said:
Exactly the same problem here. Nexus 5 running 4.4.2 kept powering off randomly roughly once a day. Attempted a factory reset and it got stuck at erasing. Having unlocked the bootloader and following the steps to unlock and reboot, I have a progress bar with the animated android icon, apparently stuck at the same stage, but without the "erasing" caption.
As far as I'm concerned, I can nothing with the phone at present short of taking it back, though they'll likely take issue with my attempts to rectify myself
Click to expand...
Click to collapse
I'll add that I've also tried the Nexus Root Toolkit v1.8.0 to flash stock. Appears to go fine, recreating the file system and loading software, then as soon as it gets to the "erasing cache" step it just sits there for hours and makes no progress.
I know I probably shouldn't promote toolkits but you can always try this. Seems to have worked for a lot of people.
http://forum.xda-developers.com/showthread.php?t=2513937
Sent from The Deathstar
Same thing happened to me yesterday. My N5 is rooted, running stock rom and recovery. I had some corrupted app date showing in Titanium that I could not remove that were causing a Play store issue for me. I backed up my phone with TB and ran a factory reset in settings. The phone was stuck on the 'erasing' screen for maybe 20 minutes, so I put the phone in fastboot and from there back into recovery. This took me back to the 'erasing' screen to my dismay. I put the phone down and started searching for a solution online, but then I noticed after about 7 minutes the erase process had finally finished on its own and the phone rebooted normally again.
Based on what others are saying in this thread it appears the factory reset process via settings or stock recovery can hang sometimes. If you power off, start the phone in fastboot and select recovery again, I'm guessing the factory reset process restarts and hopefully it will then work properly the next time, like it did for me.
Well when I did a factory reset from settings, it took nearly 20-25 minutes to finish. The next time I did a reset, it completed within 10 minutes
I guess this problem occurs randomly.
Be patient
My guess is that you just need to be patient -- my device took nearly 45 minutes to reset. It seems to me that the time required is proportional to either the amount of data or the number of files you have on the device. My device had a mix of large files (such as musics and photos) and many many small files (sensor data log files), so it's hard for me to say which of those contributed more to the long reset time.
Based on what others are saying in this thread it appears the factory reset process via settings or stock recovery can hang sometimes. If you power off, start the phone in fastboot and select recovery again, I'm guessing the factory reset process restarts and hopefully it will then work properly the next time, like it did for me.
Click to expand...
Click to collapse
This worked for me too. On the initial 'Return to factory defaults' it got stuck for about 45 minutes. I then follow the advice above:
- Put the N5 in Fastboot by pressing: Vol. Up + Vol. Down + Power
- Select: Recovery and press on Power to proceed
- Phone reboots, still into the 'Androidman' but it seems that the 'Return to factory defaults' also restarts.
- Wait about 10 minutes and the Phone powers down automatically. Upon startup you enter the 'Initial configuration menu' so the factory reset has been completed.
Still stuck on Erasing screen, running out of options
Hello,
I am a newbie with zero developer knowledge and received my Nexus 5 in the mail yesterday. I liked the phone specs and that is the only reason I got it. I left it alone while it charged up and the first thing I did once it was finished was perform a Factory Reset (it was a "like new" phone so I just wanted to be safe) and have been stuck on the Erasing screen ever since. Pressing Vol- and Power button does take me to the bootloader screen, however, any option I choose by pushing the power button, such as Recovery Mode, sends me back to the Erasing screen. Pushing Vol+, Vol-, and Power shuts the phone off completely. Holding the Power button down does nothing more than restart the phone into the Erasing screen. I have also let the phone die twice and as soon as it has enough juice to come back on, it goes straight to the Erasing screen. Everything on the phone is stock and it is completely unrooted. The bootloader screen also indicates it is unlocked. I have attempted to flash it as per instructions I have found on here but I am unable to download the stock factory images. It gets to about 90% before the install fails and I have tried to install three times already. I do have the 15 Second ADB installed, however. I assumed the install of the factory images failed because I don't have WiFi and I'm running completely off of limited 3G data (I live in the middle of no where with no high speed internet to speak of). So in lieu of all that I have attempted, is there ANYTHING at all that can be done to get the phone off of this Erasing screen? Or do I just need to try and return it because it's useless at this point? I did at first let the process run but it's now been 24 hours stuck on this Erasing screen with no improvement. I'm fairly certain it runs KitKat 4.4.0.

Oppo R7S - ROM installation crashed, cannot get back to recovery mode, keeps crashing

Hi there,
I am a newbie and hoping that someone could help to give me some clear pointers about options that i could take to rescue my phone - I hope its not bricked.
I was attempting to install LineageOS 16 on my Oppo R7s. This is my second attempt at installing a ROM - I did it a couple of weeks ago with Project Spectrum, and it worked, but Project Spectrum didn't impress me, so i wanted to try lineage OS instead).
I entered developer mode and enabled USB debugging
I downloaded the LineageOS zip to my SD card, as well as a Google Apps zip.
I downloaded the TWRP app on my phone just in case it was needed, however I've never used that app and not 100% sure how to use it.
I rebooted in recovery mode, and tried to install from the LineageOS zip file. It didn't start installing, I got some error message which I cannot recall... so I tried wiping the application data first, to see if that would help (maybe that was my mistake??)
I then went back to the install menu, and tried to install the Google Apps package first.... it started downloading, but then crashed and black screened.
Now, when I try to power on the phone, I get the oppo logo, and then it briefly goes back to the install screen for a second, with a message on the screen saying: "updating please wait, do not remove battery, do not co other operations" - but this only lasts for a second, then it crashes.
When I try to reboot into recovery mode (Power key +volume down), it does the same thing. I cannot get back to the white recovery menu.
Is there any way that I can rescue the situation and get back into recovery mode to try again? Or get back to a functioning USB connection so I can load a new ROM zip to try that instead?
When I plug it into the power, I get no indication that the phone is charging.
I'm worried the battery will go flat.
I have ADB installed on my computer, but I dont really know how to use it - the only command I know is "adb push" to load the roms onto the SD Card
Any advice on how to get access again would be greatly appreciated!

[PDP] setup fail making it difficult to hard reset my Samsung phone

So recently I tried completely wiping my cache from the recovery mode, but when I restarted the phone and held the power and volume up buttons, instead of entering recovery mode the phone just vibrated and booted normally. It then showed this message.
[PDP] Back-up : fail setup-wizard [ FINISH ]
Does anyone know what I can do to fix this ? I've already tried several times.
Erskinelink1 said:
So recently I tried completely wiping my cache from the recovery mode, but when I restarted the phone and held the power and volume up buttons, instead of entering recovery mode the phone just vibrated and booted normally. It then showed this message.
[PDP] Back-up : fail setup-wizard [ FINISH ]
Does anyone know what I can do to fix this ? I've already tried several times.
Click to expand...
Click to collapse
did you fix this? i have exactly same proble, i create custom AP from stock with magisk latest i wipe all partitions but when i flash it over odin i get same error
No, i still cant reset it. This is the feedback i get each time i try to hard tweet it
[PDP] Back-up : fail setup-wizard [ FINISH ]
No, i still cant hard reset it. This is the feedback [PDP] Back-up : fail setup-wizard [ FINISH ]
i think if you need a rooted phone just install lineageos is much faster and debloated than stock, i change my stock today to lineage and is amazing
when you change to lineageos install auroraoss store amazing app like google store
you can root lineageos so easy in recovery twrp install magisk zip thats all no problems at all
IF you want more options to play jest follow these post
[Guide] Running Linux on Android with 3D Acceleration / OpenGL (Root Required)
All credits go to: Hentacler for making Sparkle Meefik for making Linux Deploy Now on to the tutorial! Requirements: Sparkle Linux Deploy Termux Now you have all those apps installed lets continue Open Termux then enter: su Once in root...
forum.xda-developers.com
That message what you have i magisk recovery script.
Magisk is installed on recovery partition and when you hold that button when phone power on magisk installing to the phone thats why vibrate
If you wanna go to recovery mode just hold same button combo before phone start logo shows and keep long as possible and you must have connected usb cable to the pc if you press button combo when logo is already on the phone then magisk start installing and thats why its vibrate
When you will hard reset i think you gonna lose magisk and root.
That message what you have should say "backup success" i think magisk is broken and for me is not working too
When you will hard reset i think you gonna lose magisk and root.
That message what you have should say "backup success" i think magisk is broken
Erskinelink1 said:
No, i still cant hard reset it. This is the feedback [PDP] Back-up : fail setup-wizard [ FINISH ]
Click to expand...
Click to collapse
Do you fix this?
I have had that same issue. Unfortunately my partner's phone had a keylock on ii so these are the problems I had to face.
Draw the pattern several times but it never gave me the option to 'use a google account' so it carried on until I had to wait 65 minutes before drawing another pattern. Still no google account option.
I'd swipe down, select the wifi to get it to connect and it wouldn't let me look for my wifi to put a code in.
After a search, it gave me some software that I can download off Tenorshare so I downloaded it and tried which put me to the next problem, I couldn't get into the root menu to factory reset the phone and the phone wouldn't allow me to get into the diagnostic screen when I type on the *#09#*, I think the code is but you can get in via clicking the emergency call option. I'd volume up and power, it buzzed twice and still continued to the main samsung screen. The software from Tenorshare couldn't do much with it ie remove the google account but here's what else I did. I remembered that I used to upgrade firmware on samsung mobile phones via this website so I downloaded the Odin software, found the correct firmware from sammobile.com and that came up with something surprising. As much as I couldn't get into the root menu, I just believe that it's missing or corrupted,
so I connected the phone to the PC using the USB,
fired up Odin, Odin didn't show anything in the log but it after restarting the phone and pressing volume up and power, it buzzed twice and it went into a blue download screen and sat there. I thought, heyyyy this screen is usable.
The download for the firmware was complete and I unzipped it to it's 5 components, USERDATA, BL, AL and two others,
I had put the seperate files into the Odin software and clicked the start button. It uploaded the firmware successfully and restarted the phone so I did the volume up and power (I think I did it or the phone went into the root menu itself).
From there, I factory reset the phone, rebooted and it still asked for the draw pattern but I could set up the wifi, so since I was doing this late, I couldn't be bothered to phone the partner up to get all the email, questions etc.
So I rebooted the phone, went into the root and cleared the cache; this didn't really help at all because the draw pattern came up and when I used my gmail account; the phone wouldn't change the owner.
So I went back to the Tenorshare software and used the google account removal option and that worked;
The is completely clean and I can give it back to her, I did some google updates, galaxy store updates and it works fine. So just need to give it back.

Update 11.1.1.1 installed successfully on OP 6T but is stuck in loading

Hello,
Anyone else having problems after this update? I did it now and my phone does not start anymore. Or at least it hangs in the loading screen with the red and 2 white dots.
I shut it down with power and vol + twice but with no effect. It does not react on the power cable being inserted. When it's powered off and I insert the cable it starts to the loading screen, currently showing 14 %.
How to solve this?
Thank you!
I can boot into recovery or fastboot. Not sure how helpful that is though.
try to format data if you're able to go to recovery. as long you have recovery and fastboot intact, it's basically not ****ed up yet
dewa5227 said:
try to format data if you're able to go to recovery. as long you have recovery and fastboot intact, it's basically not ****ed up yet
Click to expand...
Click to collapse
But how can I save my data? I mean when I'm in recovery I have to enter the password before, so the data gets decrypted. But with USB attached I can only see 5 files on my desktop computer.
I emptied the battery and loaded it fully, then restarted. After a long time it say "This device has entered an unstable state. Please try rebooting your device using the exit button below..." and so on.
I hope a data recovery company isn't the only solution.
Also, is there no way to repair it? Like running the update again or something?
Why is there no „apply update from adb“ option in the recovery menu of OnePlus? Apparently I could have used that to backup all my data from the phone.
I tried wiping the cache partition without success so far.
So did Android squeeze security so much that not even the owner can save his data in this status now anymore? A bit sad when they themself break the phone with an update then.
What about these recovery services that also recover data from harddrives? Do they break the phone when they do their thing?

Categories

Resources