can someone pls help me i have recently tried to upgrade my samsung galaxy ace from gingerbread to ics, after installation of clockworkmod i cleared cache partition and cleared to factory settings , but forgot to install cynogen file in my phone, now i think i have erased everything and my phone is continuesly rebooting can someone pls help in simple language what exactly happened to my phone and how to normalise it.thanks.
Hi Everyone,
I need help, I was on Stock ROM, and just rooted to change the stock fonts. Used font changer(root) application to do that and now TAB is not booting and its stuck in Samsung glowing screen.
Details are as below:
Model: Samsung TAB2 P3100
ROM: Just out of box with stock 4.1.1
\i already tried hard reset, by going into stock recovery>factory reset.. but no luck.
I dont have SD CARD, i have just put tab to charge so that it will not effect anything further.
Please help me, what best i can do to boot up?
Thanks,
try format system data cache,, all you found and then try flash the stock with odin
nagabushan.c said:
Hi Everyone,
I need help, I was on Stock ROM, and just rooted to change the stock fonts. Used font changer(root) application to do that and now TAB is not booting and its stuck in Samsung glowing screen.
Details are as below:
Model: Samsung TAB2 P3100
ROM: Just out of box with stock 4.1.1
\i already tried hard reset, by going into stock recovery>factory reset.. but no luck.
I dont have SD CARD, i have just put tab to charge so that it will not effect anything further.
Please help me, what best i can do to boot up?
Thanks,
Click to expand...
Click to collapse
I downloaded the stock firmware (about 750MB) from sammobile site, device is up and connects to internet everything is working fine apart from USB storage/MTP/ even though kies... would it be issue with the firmware which i downloaded or anything related to PC.. ?? i have already tried reinstalling KIES, factory reset... no luck.. can anyone help me.. where would be the issue is??
nagabushan.c said:
I downloaded the stock firmware (about 750MB) from sammobile site, device is up and connects to internet everything is working fine apart from USB storage/MTP/ even though kies... would it be issue with the firmware which i downloaded or anything related to PC.. ?? i have already tried reinstalling KIES, factory reset... no luck.. can anyone help me.. where would be the issue is??
Click to expand...
Click to collapse
Maybe its related to pc , try uninstall kies and Google usbdeview and remove all drivers related to your tablet, then try connect again or install kies
Sent from my GT-P3110 using XDA Premium HD app
nagabushan.c said:
I downloaded the stock firmware (about 750MB) from sammobile site, device is up and connects to internet everything is working fine apart from USB storage/MTP/ even though kies... would it be issue with the firmware which i downloaded or anything related to PC.. ?? i have already tried reinstalling KIES, factory reset... no luck.. can anyone help me.. where would be the issue is??
Click to expand...
Click to collapse
Exactly what happens when you flash stock ROM from KIES?
nagabushan.c said:
Hi Everyone,
I need help, I was on Stock ROM, and just rooted to change the stock fonts. Used font changer(root) application to do that and now TAB is not booting and its stuck in Samsung glowing screen.
Details are as below:
Model: Samsung TAB2 P3100
ROM: Just out of box with stock 4.1.1
\i already tried hard reset, by going into stock recovery>factory reset.. but no luck.
I dont have SD CARD, i have just put tab to charge so that it will not effect anything further.
Please help me, what best i can do to boot up?
Thanks,
Click to expand...
Click to collapse
Mine got stuck in a boot loop after the OTA update. I had to do a reset by holding down the power and up volume, when the samsung galaxy screen shows release the power button. You can then choose "wipe data/factory reset" and then reboot. Of course this wipes all user information, but at least it did fix the boot loop issue I had.
Thanks Everyone, sorry for my late reply.
I did a soft reset, by going into setting>security>Factory reset.
PC detected this time, everything working flawlessly.
I need some suggestion on rooting and unrooting to replace /system/fonts/lohit-kannada.ttf into a better font like(samsung-kannada.ttf), which is already in the same folder to render and read articles.
Please help me in that. I will post a thread in Q&A, if anyone knows, solution please reply there.
I bricked TAB2 and lead to this thread all because i rooted using Auto-CF and used Font changer (Root) application from playstore.
Thanks in advance.
Alternative fonts for your device http://forum.xda-developers.com/showthread.php?t=2097460
I have a samsung galaxy sl-9003 and i gave it to a friend to update it for me but he [email protected]@ed it up.it was dead i tried to root it with odin(odin said pass) but its now in eternity bootloop. i tried many roms even the stock one but nothing.and when i am in recovery mode i have only wipe option and install zip from sd card.but it doesnt read sdcard.sorry guys but i am not so experienced and i really need a hand here.
Thank you in advance
Hello Guys,
I'm facing some issues with my P6200 where it is hanging at samsung logo during its initialization.
Checking some other threads here some guys advised people with similar problem than mine to wipe data and cache partition and run factory reset from recovery mode but this option isn't available for me because even using the key combination to boot in recovery mode the device still hang on samsung logo.
After some search I found the thread below in another model forum where this guy have created a utility that do a factory reset from odin to its samsung device model:
http://forum.xda-developers.com/showthread.php?t=1670110
Does someone know how did he made this? Could this work to P6200 too?
Unfortunately I couldn't check the file by myself because the link is broken so if someone has an idea of how can this be done would be great.
Any help would be really appreciated!
(Sorry for my broken English.)
Regards
zerahzurc said:
Hello Guys,
I'm facing some issues with my P6200 where it is hanging at samsung logo during its initialization.
Checking some other threads here some guys advised people with similar problem than mine to wipe data and cache partition and run factory reset from recovery mode but this option isn't available for me because even using the key combination to boot in recovery mode the device still hang on samsung logo.
After some search I found the thread below in another model forum where this guy have created a utility that do a factory reset from odin to its samsung device model:
http://forum.xda-developers.com/showthread.php?t=1670110
Does someone know how did he made this? Could this work to P6200 too?
Unfortunately I couldn't check the file by myself because the link is broken so if someone has an idea of how can this be done would be great.
Any help would be really appreciated!
(Sorry for my broken English.)
Regards
Click to expand...
Click to collapse
Did you ever get this sorted out mate ??
Am looking for the same sort of thing
Hi Dear Senior Member I Have A Problem When I Flash Stock Rom Firmware
After Complete Installation Phone Work Properly But If Notify By Some Thing Written " Factory Mod Is On" Is There Is Any Solution Please Help me i change many firmware by using Odin but same problem in all..
Flashed rom and got Factory Mode activated.. something like this