Hi all.
Are some WP7 programmer for marketplace here?
It would be so nice, if it is possible to code a oneclickbutton for the homescreen to activate/deavtivate bluetooth.
THX for your help.
Battery+3G API
I have a HTC Trophy and i'm trying to figure out another thing but similar concept. Turn on/off 3G when battery is low.
I found no API for 3G handling, neither for battery
Also i confirmed this in google (can't paste link now because i'm a new user)
And Wifi....
Hi
I'd alos like a 'one click' app (i.e. a live tile I could pin to the homescreen) to toggle WiFi on/off.
I've done a little programming, so I'd consider downloading the SDK and trying it myself, but I've seen some comments abot the SDK / API not having much WiFi control in there.
Can anyone give any indication if this is even possible?
Is there an online resource I can view/search to see what functions are exposed in the API?
Maybe searching here: h t t p : //create.msdn.com/en-US/education/catalog/article/wp7_jump_start
Btw..i suspect that you will not found any API related with Wifi to enable us to create the tile.
I also like to have an App which enables Bluetooth/connect with my device just with one click
Is not "one click", but try this:
http://forum.touchxperience.com/viewtopic.php?f=3&t=591
paulf707 said:
Hi
I'd alos like a 'one click' app (i.e. a live tile I could pin to the homescreen) to toggle WiFi on/off.
I've done a little programming, so I'd consider downloading the SDK and trying it myself, but I've seen some comments abot the SDK / API not having much WiFi control in there.
Can anyone give any indication if this is even possible?
Is there an online resource I can view/search to see what functions are exposed in the API?
Click to expand...
Click to collapse
I know a solution for that...
Open the Diagnostics and press: *#2263#
It will open the network options.
To set only 2G/EDGE, press 3 (GSM Band Preference) and press 7 (ALL) on the next screen.
You can do the same steps to set only 3G or Automatic (default) again.
Not being of mathematical mind im having trouble understanding the settings in a tasker profile i want to create.
What i need is a rule that would
a) switch on wifi when the screen is switched on
b) switch off wifi 2 minutes after screen turns off
Help would be appreciated!
android does that automatically. when the screen is of wifi goes to sleep after a certain timeout (you can change that timeout using OCLF)
Tasker meh!
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
stinkypete said:
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
When I first bought Tasker, I felt the same way. The UI felt difficult to understand and I couldn't really get it to do what I wanted. Every few weeks, I would redownload it and give it another try, then quickly give up. At some point, it started to make sense and I figured out how it all works.
Yes, Tasker has a large learning curve and the UI needs work, but the time it took to figure it out has been so well worth it.
stinkypete said:
<snip>
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
Part of the attraction of Tasker for me is that it's not centred around loading and personalising profiles from a public 'bank'. Yes there are profiles that people have shared, both on the Tasker website and in numerous threads on various forums. I treated these as learning examples, 'tutorials', and used them to gain an understanding of how to start writing my own profiles.
I've had Tasker about 3 / 4 months and have written approximately 15 profiles that have significantly changed how I interact with my N1, and how it interacts with my environment. These range from the very simple (reduce media volume when a wired headset is plugged in), to the horrendously complicated (workaround an issue with my bluetooth connection to my car kit).
I doubt whether I would have bothered to experiment to this extent if the focus had been on loading up and personalising publicised profiles.
I agree that the UI is perhaps less polished than other apps, however at most I would suggest that the dev has concentrated first on function over form. As a software developer who cut his teeth on mainframe COBOL I approve of that, particularly given the number of pretty but buggy apps on the market. Personally I care more about Tasker working correctly - I don't want my phone to ring during meetings if it's set not to - than looking pretty, as (in between tweaking profiles) I don't really see the app itself.
Sorry it took a while to read these replies!
Anywho, i now have had a different idea - tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
ftgg99 said:
tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
Click to expand...
Click to collapse
Which is exactly what the WiFi Near Profile does,
with the time interval for each check being possible to set to your own liking.
However, you adding additional restrictions based on the cell-near could save some useless scanning. Usually Wifi Access points have a fairly static location don't they, so why do a WiFi Near scan if you are not at your home/work/collage anyway.
daoth said:
- Start skype when wifi is connected, logout skype on wifi disconnect
Click to expand...
Click to collapse
How did you achieve the logout on wifi disconnect? I can't get Tasker to kill apps, which is said to be a common problem under the latest FroYo stock ROMs (at least for my Desire HD)
I don't have root access btw, since that requires me to downgrade my ROM first, which would cause me to loose my warranty...
daoth said:
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
Click to expand...
Click to collapse
How did you get wifi to switch off when its not connected to any network, occasional i leave the house and i forget to switch wifi off. I tried location based wifi off but it wont be as fast or accurate as switching off wifi when theirs no connection after lets say 1-2 minutes. I considered getting another app to do this after i tried to get it to work with tasker, but i have enough apps running in the background.
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
arielc said:
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
Click to expand...
Click to collapse
That may be linked to timings of background context checks when the screen is off.
Personally I always leave GPS on, but only use Net location / Cell IDs for my Tasker location contexts.
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
drgopoos said:
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
Click to expand...
Click to collapse
I am posting one everyday this week and I think I have a couple more. I will post even more whenever I either come up with new ideas or someone gives me a new idea.
Ok, I have a very basic understanding of tasker. I actually was able to make my gps app turn on the gps when being executed. I only added gps off exit task after reading the wiki. However, I'm trying to find a way to do the following:
when selecting pandora icon (I say icon, as I may need a pointer to the actual app)
verify wifi connection status - if connected, then load pandora app; if not connected, kill pandora app (might be redundant but just in case)
I also need to create a general wifi connection status, such that if connection is lost, kill specific running apps (such as pandora; could add more later)
I tend to fall asleep using headphones and pandora. I'd REALLY hate to find out that my cable/wifi went down while asleep and I've just been listening to pandora using cell data for several hours.
Now, making a profile to turn on wifi is easy enough, but not sure how to do the above. I'd imagine it'd be something like:
If [pandora app] initiated
wifi_connected = 1 (or yes or whatever)
then load [pandora app]
any help would be appreciated
EDIT: Nevermind. Though knowing more about how variables are used in TASKER would be interesting (I'll play around with them some more), I found out that with wifi ON, cell data usage is cut off. I disconnected my cable connection and with wifi still on, I couldn't connect to anything. So worry was unfounded, it turns out.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
thanks once again.. am testing out a few of them
drgopoos said:
thanks once again.. am testing out a few of them
Click to expand...
Click to collapse
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Some actual description of what the tasker profiles do would be very helpful... also less tit shots so that I don't catch crap for looking at the site from work would be nice.
dbilliter said:
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Click to expand...
Click to collapse
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
drgopoos said:
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
Click to expand...
Click to collapse
Sorry for the delay. I don't know of a way personally. I can only work with what I got and I don't have a headset with a mic so I have no way of testing. One option you could do though is have a menu pop up and ask you which you want.
I am starting this thread for anyone to post direct links only to their created profiles so that we can import our setups to tasker straight from within the XDA android app.
Switch on WiFi and GPS and Bluetooth when connected to any power source
CoPilot - Switch on GPS when starting and switch off when exiting
Will read incoming sms only when bluetooth is connected to Drive Transmit Pro profile 1 of 2 (this can be modified for any connected bluetooth device)
Will read incoming sms only when bluetooth is connected to Drive Transmit Pro profile 2 of 2 (this would need the greeting modified unless your name is also Anthony!)
anthortic said:
I am starting this thread for anyone to post direct links only to their created profiles so that we can import our setups to tasker straight from within the XDA android app.
Switch on WiFi and GPS and Bluetooth when connected to any power source
CoPilot - Switch on GPS when starting and switch off when exiting
Car Home - Switch on GPS when starting and switch off when exiting
Navigation - Switch on GPS when starting and switch off when exiting
Maps - Switch on GPS when starting and switch off when exiting
Places - Switch on GPS when starting and switch off when exiting
Shopper - Switch on GPS when starting and switch off when exiting
Goggles - Switch on GPS when starting and switch off when exiting
Facebook - Switch on GPS when starting and switch off when exiting
Twitter - Switch on GPS when starting and switch off when exiting
Will read incoming sms when bluetooth is connected to Drive Transmit Pro profile 1 of 2 (this can be modified for any connected bluetooth device)
Will read incoming sms when bluetooth is connected to Drive Transmit Pro profile 2 of 2 (this would need the greeting modified unless your name is also Anthony!)
Click to expand...
Click to collapse
Just so you know you only have to have one Profile for all of those GPS Context. You just have to check every app you want the GPS to start with when creating your context. All of my profiles are on my blog in my signature if you want to check them out.
dbilliter said:
Just so you know you only have to have one Profile for all of those GPS Context. You just have to check every app you want the GPS to start with when creating your context. All of my profiles are on my blog in my signature if you want to check them out.
Click to expand...
Click to collapse
Thanks I made the changes, had no idea you could select a range of apps i just didnt think to try!
I'll leave the copilot one however because the app asks if you want to turn it on before the gps has chance to start, so it needed a little more configuration.
cheers though, makes tasker look a lot tidier, ill check your blog too
Cool blog just looked through it, useful tasker profiles too. Would you consider adding them to this thread so that users can import them straight from the XDA app?
dbilliter said:
Just so you know you only have to have one Profile for all of those GPS Context. You just have to check every app you want the GPS to start with when creating your context. All of my profiles are on my blog in my signature if you want to check them out.
Click to expand...
Click to collapse
I've been checking your blog out for the past couple days and the Personal Assistant is really interesting. I tried to implement it several times to no avail. Long story short, I was wondering if you could post the profile so i can upload with the actual Tasker app. Any help is greatly appreciated.
Does anyone still use tasker? If so, may I have a link to the thread that's not dead.
Sent from my PG06100 using XDA Premium App
Suggestions or questions are welcome!
Description:
Here is a simple-ish script I wrote to manage data flow on my phone. Mobile data on/off is easy enough but what most users have a hard time pulling off is when to toggle wifi on and off with minimal consumption. Using local tower states is pretty common but it's inaccurate and slow; additionally my method uses less battery life.
Room for improvement:
The only thing I would like to do in order to improve this is to have the script not disable data when downloading or streaming. This is possible but is unique per device per ROM so I can't really go into detail about how to do it. As a summary though there's a file that is written to that keeps information about bytes traffic. You just read this file to determine how much data is flowing in a specific interval and if it exceeds a certain amount then don't turn off data just yet. It's also a known issue where with some devices the 3G state change won't register when toggling manually while connected to wifi.
Features:
Wifi and 3G will disable two minutes after the screen is off so it's not constantly toggled through intermittent use.
On some phones or providers the 3G status becomes unknown when in a call or when connected to wifi; this script works around that.
Unlike most data management apps this one will remember your 3G status should you manually change it, in case you don't want 3G on at all.
Data is still checked on an hourly basis(this can be adjusted of course).
Fast and accurate wifi connecting with very minimal power drain.
Just a few things explained for those curious:
I check the phone state to ensure that 3G isn't detected as manually disabled when your provider uses 3G to place calls.
I check the screen on time because on some phones/ROMs the 3G doesn't actually register as toggled until the screen flickers back on. Because of this 3G appears to only become disabled once the screen turns back on and it can be registered as manually turning it off.
The wifi timer exist so the script won't check for a wifi too frequently.
You can adjust the hourly checks under Cycle 3G.
What version of Tasker is this developed under? Just curious, I'm running the 4.0 beta, and I just had to back out of b19 to b18 because of issues with my data management profile. I'll try yours out, it sounds a lot better than mine...
Can't seem to get this to work...tasker wont recognize the file
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
It's working great for me on 4.0b18. I still need to look at the logic being used as to what causes it to 'wake up' and connect to wireless, is it simply a delay after screen on, or are you also looking at other factors?
Tasker 1.3.3u2
My friend had problems getting his to recognize the profile as well. I'm not sure why.. It might have to be in the proper directory. You might also have to make a new profile tab for it. Hopefully rpr69 can give us some insight.
But to answer your question as to how I check Wifi...
When screen turns on I immediately try to connect to Wifi before trying 3g. 3g will still enable briefly after for phones that require it for MMS. If Wifi isn't connected after X seconds then it disables Wifi and won't try again for 10 minutes. If it does connect successfully there will be no 10 minute wait next screen on.
Added manual toggle memory to Wifi as well. I'll post the changes later and update the zip file.
Are you importing the profile, or just dropping it in a directory? The proper way is to import into a new project. In 1.3 of Tasker (from memory, it's been awhile), you need to pull down from the top of the Tasker top bar which should then give you the Projects tabs. Long press on the Home tab, and you should get an 'import' option, navigate to where you downloaded the project file on your phone and select it, and it should create a new tab for it, with the profile and tasks under it. If you had previously just manually copied the xml file into the projects directory, move it out of there or the import may fail.
Looking forward to the update!
Ok got it to work I forgot is was a project and kept trying to import only a profile. It seems great so far!!!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
To make it so it won't check wifi when you don't want it to add the following...
ProfileName - Record Wifi State
Trigger - State > Wifi Connected *
Enter Task - Set Variable %wifistate to 1 if screen ~ on
Exit Task - STOP If %ScreenOnTime + 2 > %UPS
......Set Variable %wifistate to 0 if screen ~ on
then under task "Data Types On - Type 2 P2"
very first line add - If Then > %wifistate = 1
Place a closing End If at the very bottom, and move the "Mobile Data > Set On (if %3GState = 1)" second from the bottom, just above closing.
I also just uploaded the xml file again to the main post.
Hey Guys,
Need help with Tasker and using Google Calender. I work different shifts everyday. Using a CSV file i imported my schedule into Google Calender. I use tasker to read the Calender entry and based on the shift i am working Tasker will set my phone into work mode. For example if im working for 8am, tasker will switch to work profile at 8am. Works fine. Only thing is im usually 5-10mins early for my shift, so between period of lets say 7:50 to 7:59 my phone will be on normal mode and my notifications will be heard. My question is can Tasker switch into work profile mode 10mins before the calender entry is set.
I know you may be thinking why not use tasker to switch to work mode based on location, the issue with that is, my gf lives close to my work, so it seems when i am by her my phone logs unto the same cell tower or range cause when i did that my phone goes into work mode by her.
Or would u suggest setting my shifts to Ten minutes before they start in my calender??