Related
Hi guys,
I had an idea for an app yesterday... I haven't had time to do a search, so maybe it already exists. If it does, please let me know.
The concept of this app is to have location-aware wifi. The app would connect to GPS at preconfigured intervals to check the location. If the location matches a preconfigured place (like home, work, starbucks, whatever), the app would turn on wifi and turn off the data connection.
During WiFi operation the GPS checks should cease. When you get out of wifi range and your cellphone shuts off wifi automatically (is already possible in WinMo), the scheduled GPS checks should resume.
The GPS checks need to happen on schedule similar to the schedule found in ActiveSync, also with peak times. So if you're at home at night the app knows it's not necessary to check location during that time.
The app could also have a function to store a new location as wifi-enabled place. So if you are visting an office or a new restaurant that has wifi, you could add it with just a few clicks.
What do you guys think? Any devs? Is that doable? Already done?
Regards,
Lukas
+1 This sound s very interesting and would make WiFi use much easier
Thanks for this idea, hopefully someone can develop it
Regards,
Central
Thnx, I hope a dev will share your opinion...
Lukasss said:
Hi guys,
I had an idea for an app yesterday... I haven't had time to do a search, so maybe it already exists. If it does, please let me know.
The concept of this app is to have location-aware wifi. The app would connect to GPS at preconfigured intervals to check the location. If the location matches a preconfigured place (like home, work, starbucks, whatever), the app would turn on wifi and turn off the data connection.
During WiFi operation the GPS checks should cease. When you get out of wifi range and your cellphone shuts off wifi automatically (is already possible in WinMo), the scheduled GPS checks should resume.
The GPS checks need to happen on schedule similar to the schedule found in ActiveSync, also with peak times. So if you're at home at night the app knows it's not necessary to check location during that time.
The app could also have a function to store a new location as wifi-enabled place. So if you are visting an office or a new restaurant that has wifi, you could add it with just a few clicks.
What do you guys think? Any devs? Is that doable? Already done?
Regards,
Lukas
Click to expand...
Click to collapse
There are apps that are 'cell' aware, so it know where you are, based on the information of the your providers cell tower. So when you are at home, you can use that cell id to identify you are in your home region. So you don't even have to have GPS enabled (and assuming your phone is allways on).
One of the toos I have some experience in is Ageye.de 's G-Profile. With this tool you can also disable Wifi during time intervals (like over night).
Its commercial wiht trail version. Check it out.
Edit: Just found another tool using Cell ID, it's called Wifilocations and it's free.
Btw. I'm very interested in how WinMo disables Wifi automatically when you are out of your Wifi's range, as you describe above.
I'm very interested in how WinMo disables Wifi automatically when you are out of your Wifi's range, as you describe above.
Click to expand...
Click to collapse
That's simple:
Start -> Settings -> Menu (right softkey) -> All Settings -> Connections -> WiFi -> Wireless Networks -> Menu (right softkey) -> Advanced
"Turn Off Wifi if not connected in x minutes"
I can't take screenshots at this time. You just need to open Wifi in Connections in windows mobile settings menu.
Let me know if you can't find it.
Grtz
Lukas
webpatrick said:
One of the toos I have some experience in is Ageye.de 's G-Profile. With this tool you can also disable Wifi during time intervals (like over night).
Its commercial wiht trail version. Check it out.
Edit: Just found another tool using Cell ID, it's called Wifilocations and it's free.
Click to expand...
Click to collapse
Thnx for that btw. I'll check it out tonight at home.
Grtz
Lukas
Lukasss said:
The concept of this app is to have location-aware wifi.
Click to expand...
Click to collapse
PhoneAlarm does what you want.
Lukasss said:
That's simple:
Start -> Settings -> Menu (right softkey) -> All Settings -> Connections -> WiFi -> Wireless Networks -> Menu (right softkey) -> Advanced
"Turn Off Wifi if not connected in x minutes"
I can't take screenshots at this time. You just need to open Wifi in Connections in windows mobile settings menu.
Let me know if you can't find it.
Grtz
Lukas
Click to expand...
Click to collapse
Tnx, I was never aware of this feature
Wi-Fi Alliance - Wi-Fi Aware program.
This may help. Wi-Fi Alliance announced a new p2p certification program that enables power-efficient discovery of nearby information and services before making a connection and therefore the discovery is made w/o infrastructure. Search for "Wi-Fi Aware". aware#sthash.lG3aT03e.dpuf[/url]
Lukasss said:
Hi guys,
I had an idea for an app yesterday... I haven't had time to do a search, so maybe it already exists. If it does, please let me know.
The concept of this app is to have location-aware wifi. The app would connect to GPS at preconfigured intervals to check the location. If the location matches a preconfigured place (like home, work, starbucks, whatever), the app would turn on wifi and turn off the data connection.
During WiFi operation the GPS checks should cease. When you get out of wifi range and your cellphone shuts off wifi automatically (is already possible in WinMo), the scheduled GPS checks should resume.
The GPS checks need to happen on schedule similar to the schedule found in ActiveSync, also with peak times. So if you're at home at night the app knows it's not necessary to check location during that time.
The app could also have a function to store a new location as wifi-enabled place. So if you are visting an office or a new restaurant that has wifi, you could add it with just a few clicks.
What do you guys think? Any devs? Is that doable? Already done?
Regards,
Lukas
Click to expand...
Click to collapse
Not being of mathematical mind im having trouble understanding the settings in a tasker profile i want to create.
What i need is a rule that would
a) switch on wifi when the screen is switched on
b) switch off wifi 2 minutes after screen turns off
Help would be appreciated!
android does that automatically. when the screen is of wifi goes to sleep after a certain timeout (you can change that timeout using OCLF)
Tasker meh!
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
stinkypete said:
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
When I first bought Tasker, I felt the same way. The UI felt difficult to understand and I couldn't really get it to do what I wanted. Every few weeks, I would redownload it and give it another try, then quickly give up. At some point, it started to make sense and I figured out how it all works.
Yes, Tasker has a large learning curve and the UI needs work, but the time it took to figure it out has been so well worth it.
stinkypete said:
<snip>
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
Part of the attraction of Tasker for me is that it's not centred around loading and personalising profiles from a public 'bank'. Yes there are profiles that people have shared, both on the Tasker website and in numerous threads on various forums. I treated these as learning examples, 'tutorials', and used them to gain an understanding of how to start writing my own profiles.
I've had Tasker about 3 / 4 months and have written approximately 15 profiles that have significantly changed how I interact with my N1, and how it interacts with my environment. These range from the very simple (reduce media volume when a wired headset is plugged in), to the horrendously complicated (workaround an issue with my bluetooth connection to my car kit).
I doubt whether I would have bothered to experiment to this extent if the focus had been on loading up and personalising publicised profiles.
I agree that the UI is perhaps less polished than other apps, however at most I would suggest that the dev has concentrated first on function over form. As a software developer who cut his teeth on mainframe COBOL I approve of that, particularly given the number of pretty but buggy apps on the market. Personally I care more about Tasker working correctly - I don't want my phone to ring during meetings if it's set not to - than looking pretty, as (in between tweaking profiles) I don't really see the app itself.
Sorry it took a while to read these replies!
Anywho, i now have had a different idea - tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
ftgg99 said:
tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
Click to expand...
Click to collapse
Which is exactly what the WiFi Near Profile does,
with the time interval for each check being possible to set to your own liking.
However, you adding additional restrictions based on the cell-near could save some useless scanning. Usually Wifi Access points have a fairly static location don't they, so why do a WiFi Near scan if you are not at your home/work/collage anyway.
daoth said:
- Start skype when wifi is connected, logout skype on wifi disconnect
Click to expand...
Click to collapse
How did you achieve the logout on wifi disconnect? I can't get Tasker to kill apps, which is said to be a common problem under the latest FroYo stock ROMs (at least for my Desire HD)
I don't have root access btw, since that requires me to downgrade my ROM first, which would cause me to loose my warranty...
daoth said:
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
Click to expand...
Click to collapse
How did you get wifi to switch off when its not connected to any network, occasional i leave the house and i forget to switch wifi off. I tried location based wifi off but it wont be as fast or accurate as switching off wifi when theirs no connection after lets say 1-2 minutes. I considered getting another app to do this after i tried to get it to work with tasker, but i have enough apps running in the background.
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
arielc said:
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
Click to expand...
Click to collapse
That may be linked to timings of background context checks when the screen is off.
Personally I always leave GPS on, but only use Net location / Cell IDs for my Tasker location contexts.
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
drgopoos said:
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
Click to expand...
Click to collapse
I am posting one everyday this week and I think I have a couple more. I will post even more whenever I either come up with new ideas or someone gives me a new idea.
Ok, I have a very basic understanding of tasker. I actually was able to make my gps app turn on the gps when being executed. I only added gps off exit task after reading the wiki. However, I'm trying to find a way to do the following:
when selecting pandora icon (I say icon, as I may need a pointer to the actual app)
verify wifi connection status - if connected, then load pandora app; if not connected, kill pandora app (might be redundant but just in case)
I also need to create a general wifi connection status, such that if connection is lost, kill specific running apps (such as pandora; could add more later)
I tend to fall asleep using headphones and pandora. I'd REALLY hate to find out that my cable/wifi went down while asleep and I've just been listening to pandora using cell data for several hours.
Now, making a profile to turn on wifi is easy enough, but not sure how to do the above. I'd imagine it'd be something like:
If [pandora app] initiated
wifi_connected = 1 (or yes or whatever)
then load [pandora app]
any help would be appreciated
EDIT: Nevermind. Though knowing more about how variables are used in TASKER would be interesting (I'll play around with them some more), I found out that with wifi ON, cell data usage is cut off. I disconnected my cable connection and with wifi still on, I couldn't connect to anything. So worry was unfounded, it turns out.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
thanks once again.. am testing out a few of them
drgopoos said:
thanks once again.. am testing out a few of them
Click to expand...
Click to collapse
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Some actual description of what the tasker profiles do would be very helpful... also less tit shots so that I don't catch crap for looking at the site from work would be nice.
dbilliter said:
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Click to expand...
Click to collapse
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
drgopoos said:
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
Click to expand...
Click to collapse
Sorry for the delay. I don't know of a way personally. I can only work with what I got and I don't have a headset with a mic so I have no way of testing. One option you could do though is have a menu pop up and ask you which you want.
Hey everyone,
While I love tasker I am having an extremely difficult time getting a particular profile to work. I have a profile that is set to turn on my 3g by launching the phone info app and using the virtual keyboard to select the CDMA only option. The profile launches when the battery is below 85%. It works, but the issue is that the profile keeps randomly launching even when the phone is already on 3g or when it has already executed the task. I have attached a screenshot if anyone can help me identify what variable I am missing please that would help.
edit had to use Dropbox:
http://db.tt/g2UalOGf
http://db.tt/6k7gLQcG
Suggestions or questions are welcome!
Description:
Here is a simple-ish script I wrote to manage data flow on my phone. Mobile data on/off is easy enough but what most users have a hard time pulling off is when to toggle wifi on and off with minimal consumption. Using local tower states is pretty common but it's inaccurate and slow; additionally my method uses less battery life.
Room for improvement:
The only thing I would like to do in order to improve this is to have the script not disable data when downloading or streaming. This is possible but is unique per device per ROM so I can't really go into detail about how to do it. As a summary though there's a file that is written to that keeps information about bytes traffic. You just read this file to determine how much data is flowing in a specific interval and if it exceeds a certain amount then don't turn off data just yet. It's also a known issue where with some devices the 3G state change won't register when toggling manually while connected to wifi.
Features:
Wifi and 3G will disable two minutes after the screen is off so it's not constantly toggled through intermittent use.
On some phones or providers the 3G status becomes unknown when in a call or when connected to wifi; this script works around that.
Unlike most data management apps this one will remember your 3G status should you manually change it, in case you don't want 3G on at all.
Data is still checked on an hourly basis(this can be adjusted of course).
Fast and accurate wifi connecting with very minimal power drain.
Just a few things explained for those curious:
I check the phone state to ensure that 3G isn't detected as manually disabled when your provider uses 3G to place calls.
I check the screen on time because on some phones/ROMs the 3G doesn't actually register as toggled until the screen flickers back on. Because of this 3G appears to only become disabled once the screen turns back on and it can be registered as manually turning it off.
The wifi timer exist so the script won't check for a wifi too frequently.
You can adjust the hourly checks under Cycle 3G.
What version of Tasker is this developed under? Just curious, I'm running the 4.0 beta, and I just had to back out of b19 to b18 because of issues with my data management profile. I'll try yours out, it sounds a lot better than mine...
Can't seem to get this to work...tasker wont recognize the file
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
It's working great for me on 4.0b18. I still need to look at the logic being used as to what causes it to 'wake up' and connect to wireless, is it simply a delay after screen on, or are you also looking at other factors?
Tasker 1.3.3u2
My friend had problems getting his to recognize the profile as well. I'm not sure why.. It might have to be in the proper directory. You might also have to make a new profile tab for it. Hopefully rpr69 can give us some insight.
But to answer your question as to how I check Wifi...
When screen turns on I immediately try to connect to Wifi before trying 3g. 3g will still enable briefly after for phones that require it for MMS. If Wifi isn't connected after X seconds then it disables Wifi and won't try again for 10 minutes. If it does connect successfully there will be no 10 minute wait next screen on.
Added manual toggle memory to Wifi as well. I'll post the changes later and update the zip file.
Are you importing the profile, or just dropping it in a directory? The proper way is to import into a new project. In 1.3 of Tasker (from memory, it's been awhile), you need to pull down from the top of the Tasker top bar which should then give you the Projects tabs. Long press on the Home tab, and you should get an 'import' option, navigate to where you downloaded the project file on your phone and select it, and it should create a new tab for it, with the profile and tasks under it. If you had previously just manually copied the xml file into the projects directory, move it out of there or the import may fail.
Looking forward to the update!
Ok got it to work I forgot is was a project and kept trying to import only a profile. It seems great so far!!!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
To make it so it won't check wifi when you don't want it to add the following...
ProfileName - Record Wifi State
Trigger - State > Wifi Connected *
Enter Task - Set Variable %wifistate to 1 if screen ~ on
Exit Task - STOP If %ScreenOnTime + 2 > %UPS
......Set Variable %wifistate to 0 if screen ~ on
then under task "Data Types On - Type 2 P2"
very first line add - If Then > %wifistate = 1
Place a closing End If at the very bottom, and move the "Mobile Data > Set On (if %3GState = 1)" second from the bottom, just above closing.
I also just uploaded the xml file again to the main post.
I recently released Wireless Minder on the Play Store and would like your feedback. The short description is that it automatically powers down unused radios and occasionally powers them up to check for a connection. A radio "up periscope" is an analogy I like to use.
There are refinements that I'm planning and surely more that I haven't thought of. It's stable and functional enough that I wanted to get it out there. Knowing me, the longer it sits around the more likely it'll get forgotten
Thanks in advance for your feedback, good or bad. I'll try to incorporate your suggestions and fix any device compatibility issues.
Play Store link : https://play.google.com/store/apps/details?id=onenosepeace.wirelessminder
Mod edit: Link that included paid apps removed.
Sounds interesting, but I'll pose this question / scenario:
Say I turn my mobile data [3/4g] off, and use minder to mind to mind mobile data, while wifi is off. If wifi is off and it does its check based on a poll count, when it sees wifi is off, is there anything that will cause it to stay connected? or rather, what's making it stay disabled in that scenario.
teh roxxorz said:
Sounds interesting, but I'll pose this question / scenario:
Say I turn my mobile data [3/4g] off, and use minder to mind to mind mobile data, while wifi is off. If wifi is off and it does its check based on a poll count, when it sees wifi is off, is there anything that will cause it to stay connected? or rather, what's making it stay disabled in that scenario.
Click to expand...
Click to collapse
The behavior now is that it will try to keep one of the data connections active. If WiFi is connected, and Mobile 3G/4G is selected, it will periodically shut off the Mobile radio. It powers it back up occasionally to check for texts, missed calls, etc.
If there is no WiFi connectivity, it will not shut off the Mobile radio even if the option is selected. Is your preference to periodically shut off the Mobile radio even if there's no WiFi? I could add that option in the Settings. I plan to add a user option to choose how long to keep the Mobile radio active.
Edit: Fixed backwards logic typo
Not to be rude but it looks like a nice app to have but it seems like you need to redesign the UI.
If you know how to code it then ill design it for you and ill send you the PSD or JPEG files so you
can intergrate it into your app. Just let me know. :good:
Neat application.
SystemErrorOne said:
Not to be rude but it looks like a nice app to have but it seems like you need to redesign the UI.
If you know how to code it then ill design it for you and ill send you the PSD or JPEG files so you
can intergrate it into your app. Just let me know. :good:
Neat application.
Click to expand...
Click to collapse
No offense taken. I have no shame over my lack of graphics arts skills I welcome artwork contributions or any other contributions.
chefp said:
The behavior now is that it will try to keep one of the data connections active. If WiFi is connected, and Mobile 3G/4G is selected, it will periodically shut off the Mobile radio. It powers it back up occasionally to check for texts, missed calls, etc.
If there is WiFi connectivity, it will not shut off the Mobile radio even if the option is selected. Is your preference to periodically shut off the Mobile radio even if there's no WiFi? I could add that option in the Settings. I plan to add a user option to choose how long to keep the Mobile radio active.
Click to expand...
Click to collapse
That would be preferable, because there are times when I have neither wifi or 3g connected. You can still get calls / text without mobile data, unless you're using a voip app, like google voice, etc.
Good app. Thanks for sharing. If you plan to release a donation version, take my advice and keep these basic features free to cater to your initial user base.
You should add features like: SSID exception lists (guest, public etc.), configurable minding intervals per module and time of day schedules when minder should scan (no need to scan for car bluetooth while sleeping).
EDIT: And automatic start at boot option.
Maybe also make some of these features part of the donate / pro version.
Cheers,
C.
teh roxxorz said:
That would be preferable, because there are times when I have neither wifi or 3g connected. You can still get calls / text without mobile data, unless you're using a voip app, like google voice, etc.
Click to expand...
Click to collapse
What you're referring to is disabling Mobile Data which still allows calls/texts to go through. That doesn't save much power since the cellular radio remains on. Wireless Minder completely turns off the cellular radio by using a modified version of Airplane Mode. It's the only switch Android provides to disable the Mobile radio. The side effect of this is of course that calls/texts will not operate when the Mobile radio is turned off.
Would you like an option to periodically check Mobile Data and disable it if there's no cellular service? Searching for service can chew through battery but I'm not sure if disabling Mobile Data will improve that. I'd need to figure out a way to offer both features without confusing people.
cheatman said:
Good app. Thanks for sharing. If you plan to release a donation version, take my advice and keep these basic features free to cater to your initial user base.
You should add features like: SSID exception lists (guest, public etc.), configurable minding intervals per module and time of day schedules when minder should scan (no need to scan for car bluetooth while sleeping).
EDIT: And automatic start at boot option.
Maybe also make some of these features part of the donate / pro version.
Click to expand...
Click to collapse
I intend to keep the base version free. I've considered releasing a paid Pro version, it depends on how much work I end up having to put into advanced features. I like your idea of having independent timers for each radio as well as a scheduler. I'll put those on the list and add them as soon as I can.
Wireless Minder does auto-start at bootup. Are you asking for a switch to disable that?
As requested, I've added separate check interval settings for WiFi, Bluetooth and Mobile. Just uploaded version 1.04 to the Play Store and it may take a few hours for the listing to be updated. Sorry this took so long. The custom picker control was a PITB.
Next on the list is a user-selectable schedule for Wireless Minder to be active.
LINK
Version 1.05 adds scheduling: choose when Wireless Minder should manage the radios. I've accounted for the corner cases that I could think of such as the start time being later than the stop time (e.g. night owls). I only have so much time to test all the different scenarios so please let me know if you see a problem.
Keep the requests coming!
Edit: I've seen odd behavior that may be related to scheduling with Mobile 3G/4G enabled on Android 4.2+ devices. On those devices, superuser is required to modify airplane mode. What seems to happen is that superuser blocks for a long time then when it releases, a bunch of queued up checking events fire rapidly in succession. It's been a tough one to nail down so if anyone sees this please report your settings and when it happens (for example, right after the schedule start time passes).
Posted 1.06 today.
version 1.06 adds option to mind mobile data: automatically disable mobile data when WiFi is connected (and automatically enable mobile data when WiFi disconnects).
Add setting option to open hidden Radio Info menu. This allows changes to the mobile radio speed 2G/3G/4G (aka EVDO/GSM, WCDMA, LTE).
Temporarily disable mobile radio control on Android 4.2+ devices due to SU blocking.
i like your idea, but i'm not willing to cut the cord and turn off the cellular radio. I usually leave wifi off anyway, i guess i could just use it for bluetooth...
beddess said:
i like your idea, but i'm not willing to cut the cord and turn off the cellular radio. I usually leave wifi off anyway, i guess i could just use it for bluetooth...
Click to expand...
Click to collapse
Yes control of the cellular radio is optional and off by default. Everyone's situation is different, just note that WiFi uses alot less power than the cellular radio. Some phones get twice as much battery runtime when on WiFi compared to only the cellular radio.
Personally I've found the Bluetooth functionality to be handy. When I hop in the car, I don't have to worry about manually turning on Bluetooth (or turning it off when I get out of the car). When a call is made or received, Bluetooth automatically turns on and it connects quickly enough to take the call.
Released version 1.07
Fix WiFi detection for mobile data control
I've seen instances where the WiFi drops but mobile data isn't automatically re-enabled. Let me know if this happens and with what type of WiFi connection (home, public, etc).
On cm10.2 nightly your app is unable to detect that my phone is rooted. But otherwise neat idea, i like this app.
Verstuurd vanaf mijn Nexus 4 met Tapatalk 4
jelle2503 said:
On cm10.2 nightly your app is unable to detect that my phone is rooted. But otherwise neat idea, i like this app.
Click to expand...
Click to collapse
Thanks
I disabled mobile radio control in version 1.06 because su was blocking with scheduling enabled. When this happens, the alarms get queued up and when su decides to unblock, they fire rapidly in succession. It's a very poor user experience. I've tried to pin down the problem but haven't found a solution yet. It's either RootTools or su itself not behaving as expected.
Hi,
i didn't know the app come from here ^_^;
Btw i left a message on playstore..
I would like to turn off gsm radio totally and keep wifi...
the app instead turn off all putting in aero mode.
Is there a way to reactivate Wifi after aero mode on? or just to power off gsm mobile radio and keeping wifi?
Chooo
Ninja_Gundam said:
Hi,
i didn't know the app come from here ^_^;
Btw i left a message on playstore..
I would like to turn off gsm radio totally and keep wifi...
the app instead turn off all putting in aero mode.
Is there a way to reactivate Wifi after aero mode on? or just to power off gsm mobile radio and keeping wifi?
Chooo
Click to expand...
Click to collapse
I just saw your message, sorry for the late response. Oddly your comment didn't show on the Play Store. Regarding the mobile radio (e.g. GSM), Google doesn't provide a standard way to control it just by itself. The only common method is through Airplane Mode. To address your concern, I've configured Airplane Mode to allow WiFi and Bluetooth to continue working. The recently released version has revamped mobile/cellular behavior. It defaults to controlling Mobile Data (leaving the radio on). If you'd like it to control the Mobile Radio, there's an option under Settings.
Hope that's explanation makes sense. If you have any more questions please feel free to post here or PM me.
Are there any more updates planned for it or not?