Related
Hello everyone!
I had some stability issues on my Samsung GT-I9003, so I flashed it . And, as the title says it, I'm stuck in a bootloop. I've tried 3 or 4 flashings with different packages. Some where "One packages", with one unique PDA, or I tried the XXKPE with everything. And I'm lost. I never get past the first boot screen.
[EDIT]
I found a way to boot it, but the touchscreen isn't working, so I'm now stuck on the language selection page...
Is it my ROM who doesn't fit?
[/EDIT]
Thanks!
Before going to download mode try wiping everything, then flash xxkpe TWICE then wipe again. Make sure you flash it correctly. And odin shows PASS. Try flashing the latona.pit included in xxkpe.
Press thanks if it helped..
Sent from my GT-I9003 using XDA
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
so weird. Where did you download your xxkpe. Try here
http://forum.xda-developers.com/showthread.php?t=1004647
then follow the guide here
http://forum.xda-developers.com/showthread.php?p=14933114
I think you just fail a step on flashing a rom.
---------- Post added at 09:16 PM ---------- Previous post was at 09:14 PM ----------
Flashing bagaria root is done after flashing a stock rom for it to be rooted. You failed to put CSC file in odin maybe. Follow the guide above perfectly then everything will be fine.
You start the procedure on Step 3 if your done downloading XXKPE here
http://forum.xda-developers.com/showthread.php?t=1004647
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
/stl11 is the /cache partition.
look like you fail to flash pit file, or u flash "one package .tar file" with partition ticked in odin.
see below for the samsung recommend setup
flash pit file with all the firmware one short.
if you flash from Froyo to GB, i recommend to flash the bootloader update.
however, flash on you own risk.
100% Work!
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
For those who are struck in boot loop or Softbrick their mobile do the following things exactly as they had mentioned. I followed them and boom my phone is back to normal.
For bringing your phone back to download mode (Recovering from Softbrick)
http://forum.xda-developers.com/showthread.php?t=1411768
After entering into download mode (reinstall Ginger bread )
http://forum.xda-developers.com/showthread.php?t=1133787
Note: This step deletes your user data, so be sure what you are doing
Definitely your phone should be back to normal if you follow these steps exactly.....
Million Thanks to all those who helped me in bringing back my mobile to normal function....
Hi, I am facing the same issue with a GT-I9003 as jonasdu91. I tried all the solutions mentioned above, tried all sort of firmwares. The only time the phone responded was when I flashed the bagaria file. That too ended up with a non-responsive touchscreen at the language selection screen.
Could anyone suggest what more could I do to get the phone to upgrade?
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Worked for me too!!! You saved my life! Thanks!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Good!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
How do I flash other stock rom after that? I've tried to flash XXLE4 rom, and received boot error and unmounted FS
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
YLNdroid said:
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
Click to expand...
Click to collapse
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
Put the files like this:
PIT - latona_20110114.pit
PDA - I9003XXKC1-REV08-PDA-low-CL964212.tar.md5
PHONE - MODEM_I9003XXKC1_REV_00_CL964949.tar.md5
CSC - GT-I9003-CSC-SERKC1.tar.md5
Click to expand...
Click to collapse
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
xumix said:
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
Click to expand...
Click to collapse
xumix, thank you very much for your response.
I believe, the 5 files contained within the I9003XXKPE_Odin3_1.8.5.zip package, would correspond to the options available in PC ODIN3 v1.85, as follows -
PIT > latona_20110114.pit
BOOTLOADER > APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PDA > CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PHONE > MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5
CSC > GT-I9003-CSC-MULTI-OXAKPE.tar.md5
Click to expand...
Click to collapse
Am I right?
:silly:
YLNdroid said:
Am I right?
:silly:
Click to expand...
Click to collapse
You are right
xumix said:
You are right
Click to expand...
Click to collapse
xumix, I flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, but to no avail. The boot loop on the Samsung boot animation continues to persist.
EDIT
I have noticed there is a u1_02_20110310_emmc_EXT4.pit, contained within the Odin3-v1.85 folder. What is this, PIT file for?
I re-flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, and the process completed successfully. But, since the boot loop at the Samsung boot animation persisted, I pulled the battery out, and booted into Recovery Mode, not once, but on two separate instances. I was able to perform a wipe data/factory reset, on the second instance. I also performed a wipe cache partition and rebooted the device. But, the boot loop issue still continues.
I have attached images of both instances, I clicked using another device, to this post.
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Sent from my GT-I9003 using Tapatalk
chongns said:
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Click to expand...
Click to collapse
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
YLNdroid said:
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
Click to expand...
Click to collapse
Friends, I still await your expertise.
:fingers-crossed:
- I am running Android 2.3.6. I flashed the UCLB3 via Heimdall. I have GB bootloaders from Heimdall
- I have the bootloaders from Samsung Kies Mini
- I have USB Debugging on, but when I connect to the computer it says “USB Connected” rather than “USB debugging connected.”
- I try rooting through Odin using jscott's tar.md5 files in the PDA window, but the window does not turn yellow (indicating the phone is not recognized) and after the process the Gingerbread setup greets me, but I do not have Superuser.
- SuperOneClick just freezes up when I try to root.
- I've tried to use the modified 3e recovery via replacing the “recovery” file in /system/bin but there is no recovery file there and the paste “fails” due to lack of superuser access, I presume.
- Basically, I'm stuck and unable to root or flash anything that has SuperUser unless I can either get Odin to recognize my device or find another way that does.
When I first got the phone it was on froyo. I stupidly tried to flash an ICS ROM (Dark Knight) because I assumed it was on GB. I successfully rooted using SuperOneClick and flashed CWM recovery, but got the rainbow distortion from lack of GB bootloaders. I then proceeded to flash the UCLB3 via Heimdall and got my phone working again, but with ranbow distortion on boot and in recovery mode (rendering the CWM recovery useless as it would not respond with the rainbow distortion. I then re-flashed UCLB3 using Heimdall and checked the “GB bootloaders” box this time, which got rid of the distortion. But now I'm stuck and unable to root or flash anything because Odin won't recognize my device (it says it's there but the window does not turn yellow) and no other methods give me SuperUser. Kies Mini recognizes my device and says there are no updates, so it's not the cord. However, Kies regular does not. I think it's something to do with USB debugging not working properly and allowing Odin to recognize the phone so it can root it.
JoeyofBladez said:
- I am running Android 2.3.6. I flashed the UCLB3 via Heimdall. I have GB bootloaders from Heimdall
- I have the bootloaders from Samsung Kies Mini
- I have USB Debugging on, but when I connect to the computer it says “USB Connected” rather than “USB debugging connected.”
- I try rooting through Odin using jscott's tar.md5 files in the PDA window, but the window does not turn yellow (indicating the phone is not recognized) and after the process the Gingerbread setup greets me, but I do not have Superuser.
- SuperOneClick just freezes up when I try to root.
- I've tried to use the modified 3e recovery via replacing the “recovery” file in /system/bin but there is no recovery file there and the paste “fails” due to lack of superuser access, I presume.
- Basically, I'm stuck and unable to root or flash anything that has SuperUser unless I can either get Odin to recognize my device or find another way that does.
When I first got the phone it was on froyo. I stupidly tried to flash an ICS ROM (Dark Knight) because I assumed it was on GB. I successfully rooted using SuperOneClick and flashed CWM recovery, but got the rainbow distortion from lack of GB bootloaders. I then proceeded to flash the UCLB3 via Heimdall and got my phone working again, but with ranbow distortion on boot and in recovery mode (rendering the CWM recovery useless as it would not respond with the rainbow distortion. I then re-flashed UCLB3 using Heimdall and checked the “GB bootloaders” box this time, which got rid of the distortion. But now I'm stuck and unable to root or flash anything because Odin won't recognize my device (it says it's there but the window does not turn yellow) and no other methods give me SuperUser. Kies Mini recognizes my device and says there are no updates, so it's not the cord. However, Kies regular does not. I think it's something to do with USB debugging not working properly and allowing Odin to recognize the phone so it can root it.
Click to expand...
Click to collapse
download mode:
http://forum.xda-developers.com/showpost.php?p=25526654&postcount=3
profit
Thanks for quick reply and it worked!
I flashed a rom (Dark Knight) but every time I reboot, it goes straight to recovery. Do I need to change some settings or what? No matter how many times I flash it, the phone boots straight to CWM Recovery. What did I do wrong? What should I do now? I think I'm just stuck in a boot loop but I don't want to restore to stock and try again because I'll probably just keep making the same mistake. Instead I'd rather wait for someone to tell me why that flash didn't work and what I should do to make it work. Ive done work on a few other (newer) phones and I've never had this happen.
JoeyofBladez said:
I flashed a rom (Dark Knight) but every time I reboot, it goes straight to recovery. Do I need to change some settings or what? No matter how many times I flash it, the phone boots straight to CWM Recovery. What did I do wrong? What should I do now? I think I'm just stuck in a boot loop but I don't want to restore to stock and try again because I'll probably just keep making the same mistake. Instead I'd rather wait for someone to tell me why that flash didn't work and what I should do to make it work. Ive done work on a few other (newer) phones and I've never had this happen.
Click to expand...
Click to collapse
Read the OPs.
You need to flash CM9 twice, with a wipe in between.
If you accidentally did a reboot to recovery and suck in a loop, use the GB kernel flash in heimdall, wipe. Download mode, flash the Jt kernel and try again
qkster said:
Read the OPs.
You need to flash CM9 twice, with a wipe in between.
If you accidentally did a reboot to recovery and suck in a loop, use the GB kernel flash in heimdall, wipe. Download mode, flash the Jt kernel and try again
Click to expand...
Click to collapse
I read the instructions and i didn't see it say to wipe in between flashes, just to reboot recovery. I do follow directions you know but can't follow directions that aren't written in the spot I'm reading them and assuming them to be right. But thank you for telling me what I should havedone. So once I have jt kernel, I just flash, wipe, reboot recovery,and flash again?
I did the UCLB3 Repartition One Click and then wiped everything. Then I flashed JT's kernel and flashed the ROM. Before I could do anything else, it started on its own and everything is fine now. THanks for your help, I'm still a little confused but you pointed me in the right direction. Thanks will be given.
JoeyofBladez said:
I did the UCLB3 Repartition One Click and then wiped everything. Then I flashed JT's kernel and flashed the ROM. Before I could do anything else, it started on its own and everything is fine now. THanks for your help, I'm still a little confused but you pointed me in the right direction. Thanks will be given.
Click to expand...
Click to collapse
Glad it worked for you.
While in cwm recovery, re-boot into recovery means powering off and then turn back on with 3 finger salute.
Selecting "Reboot Recovery" may not work and may send a user into a loop recovery image.
I've found from experience that flashing a different kernel with different cwm version may erase that loop and let you start over.
As you have discovered what I've been saying along and if you read the ops on the heimdall thread, you will understand that rooting the official firmware is pointless if you are planning on flashing a custom firmware.
Root it only to run it with root permissions.
Flashing in download mode does not require root. Just flash the kernel with cwm recovery.
have fun
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
jackrabbit72380 said:
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
Click to expand...
Click to collapse
Follow the instructions from this post. Since you are soft bricked at the moment, you'll need to start at step 4. If you have an extSD in your phone, you might want to pull it until after you're up and running because the "Android" folder from Kitkat needs to be deleted and rebuilt for Lollipop.
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
jackrabbit72380 said:
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
Click to expand...
Click to collapse
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Ramer said:
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Click to expand...
Click to collapse
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
jackrabbit72380 said:
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
Click to expand...
Click to collapse
Try this: Do a battery pull, then put the phone in Download mode, hook up to PC and then open Odin and then Odin custom recovery, either twrp or Philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update Odin, there's a link to Odin 3.10.0 in my post. Let's see if we can get that far and go from there.
ramer said:
try this: Do a battery pull, then put the phone in download mode, hook up to pc and then open odin and odin custom recovery, either twrp or philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update odin, there's a link to odin 3.10.0 in my post. Let's see if we can get that far and go from there.
Click to expand...
Click to collapse
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
jackrabbit72380 said:
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
Click to expand...
Click to collapse
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Ramer said:
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Click to expand...
Click to collapse
Yes I tryed
I pulled the battery after Odin said PASS
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
when ever i try and boot the rom the phone vibrates 2 times and resets.
when ever i try to boot to recovery
i get
recovery booting....
recovery is not seandroid enforcing
set warranty bit : recovery
then phone reboots.
then it trys to boot the rom.
and vibrates 2 times and resets.
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
jackrabbit72380 said:
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
Click to expand...
Click to collapse
I saw your post count, I knew you knew what you're doing, just wanted to double check everything. Sorry, I'm out of ideas. I did ask @tdunham to take a look at this thread, if he has some other ideas, but he's offline right now. Hopefully he'll check in later.
What about flashing back to an older version of android? Full tar flash.
---------- Post added at 12:38 AM ---------- Previous post was at 12:36 AM ----------
Like ne5, and nothing else, just see if you can get stock to boot, no messing around trying to flash recovery.
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Ramer said:
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Click to expand...
Click to collapse
I tryied ni3 already
but as far as i know you cant downgrade the bootloader.
if i could flash just the bootloader for ota6 maybe that would help.
i will try downloading ne5 now but my last rom was running a nkd modem.
im going to try and flash G900P_NKD_FullRestore.tar in odin if that dont work ill try ne5
and will report back shortly.
well nkd full restore boots up to
unknowen error!
wait..
done!
udc start.
power reset or
unknown
upload mode.
this is the way i got it back from retech after they replaced my bezel and digitlizer and screen
i never had an issue with anything software wize before that.
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
tdunham said:
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
Click to expand...
Click to collapse
Yes I was using the pit file and yes I know to go to download mode from power off state. and no sim card is in the phone.
flashing ne5 stock with fingers crossed.
brb
nope
is there any bootloaders only i can flash?
well tryed everything all it does is vibrate 2 times. same as be4 im dead in the water. i don't know what's wrong or what to do.
I have tryed everything i can think of.
I can boot to download mode and flash anything i want but nothing works.
no recovery. no rom.
Pretty sure it's hosed but I will ask anyway.
What I have is a verizon S6 that is on AOE2, stock other than root.
What I did to cause brick: I tried flashing wifi tether mod, but flashed the AOC3 version by mistake. I flashed via flash fire but it is stuck in a boot loop.
The problem: Boot looping at verizon screen. Odin and smart switcher wont see the device in recovery/odin mode.
What I have tried: Clear cache and factory reset, No change. I tried odin but the pc does not see the phone in recovery. Same with smart switch and ADB. They do see the device during boot up prior to the reboot, about 38seconds during the verizon logo. Also they see it with the phone completely off but won't allow any changes.
Not sure what the problem ended up being, but finally got odin to pick it up. I think it was a bad copy of odin. I had odin zip on memory stick I used on each system to rule out pc as cause. Re-downloaded odin and tried again, seen it no problem. I just wanted to personally thank each of you for taking the time to help!
liquidtoon said:
Pretty sure it's hosed but I will ask anyway.
What I have is a verizon S6 that is on AOE2, stock other than root.
What I did to cause brick: I tried flashing wifi tether mod, but flashed the AOC3 version by mistake. I flashed via flash fire but it is stuck in a boot loop.
The problem: Boot looping at verizon screen. Odin and smart switcher wont see the device in recovery/odin mode.
What I have tried: Clear cache and factory reset, No change. I tried odin but the pc does not see the phone in recovery. Same with smart switch and ADB. They do see the device during boot up prior to the reboot, about 38seconds during the verizon logo. Also they see it with the phone completely off but won't allow any changes.
Click to expand...
Click to collapse
It's not all lost keep experimenting with Odin you should be able to recover from that. Be sure you just go straight to download mode once it boots up. I don't see why you should have problem getting it back.
Sent from my SM-G920V using Tapatalk
MrWicked1 said:
It's not all lost keep experimenting with Odin you should be able to recover from that. Be sure you just go straight to download mode once it boots up. I don't see why you should have problem getting it back.
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
So I guess I am not sure what to try. I do see the device in odin when it is booting but it loses it again when it reboots. It doesnt seem to be long enough to do anything. All I have tried is flashing AOC3 to the AP. Is there something else I can try?
Also I am not sure why, or if it is normal, but with the device completely off odin sees it. Again all I have tried is flashing the AP, and I tried smart switch in this set up as well but didnt get anywhere.
I wasn't sure what all the mod changes and if it might be kernel or something other than the OS but I am not sure how to tell or what to try if it is.
use a diff usb port/cable and flash oe2 firmware tar in AP slot. should be able to boot after that.
DeathAngel66669 said:
use a diff usb port/cable and flash oe2 firmware tar in AP slot. should be able to boot after that.
Click to expand...
Click to collapse
Tried 3 computers , few cables and every port. Seems it is something to do with it being in recovery that PCs wont see it.
Are you trying in Download Mode? Holding Power+home+down vol, then UP vol to get into Download Mode?? Tried re-installing Verizon s6 drivers and rebooting the PC? Recovery Mode won't let you re-flash with ODIN....
No reason it would be bricked from flashing a wifi tether mod.
Download Odin 3.10.6 and the Stock OE2 Tar:
http://forum.xda-developers.com/verizon-galaxy-s6/general/verizon-s6-stock-restore-files-t3096000
Reboot your phone into download mode as per DeathAngel's instructions. Odin should see the phone, flash the Tar in the AP slot. When it reboots, hold VolUp, VolDown, Home, and Power for a few seconds until it reboots again. Boot into recovery, do a factory reset.
If Odin isn't picking it up in download mode than you have a driver/cable issue.
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
bednim said:
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
Click to expand...
Click to collapse
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
MAX 404 said:
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
Click to expand...
Click to collapse
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
bednim said:
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
Click to expand...
Click to collapse
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
MAX 404 said:
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
Click to expand...
Click to collapse
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
bednim said:
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
Click to expand...
Click to collapse
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
MAX 404 said:
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
Click to expand...
Click to collapse
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
bednim said:
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
Click to expand...
Click to collapse
When you get home, just try installing "Samsung Smart Switch" (it's no longer Kies) (http://www.samsung.com/sg/support/smartswitch/Smart_Switch_pc_setup.zip)
I understand that you already have drivers on your PC, but the Samsung Smart Switch might come with some updated drivers for your Samsung S7, which might change the scenario. Installing that, plus using another version of Odin (run it as Admin). I used this one just today. (http://dl.sammobile.com/Odin3-v3.11.1.zip)
If the flashing the recovery still fails, try flashing Stock rom under AP like suggested earlier. If that still fails.
Use Samsung Smart Switch's "Emergency recovery" but do the Initialization (2nd tab) by inputting your Phone model and let Smart Switch download the official firmware from Samsung's servers.
This must be done while your phone is in Download mode, so make sure you have enough juice to wait out the download process.
Good luck!