Everyone with an non AT&T Atrix 2 forget about the AT&T ICS leak, don't go and try to flash it because you will be stuck and maybe get hard bricked and out of luck if you have no warranty. If you are on an non AT&T Atrix 2 and try to flash back to AT&T 2.3.5 or 2.3.6 with RSDLite there is a 65% that it will fail if you are not using an AT&T Atrix 2. To prevent hard brick, please be pacient till the official release of ICS for non AT&T Atrix 2, but remember this only applies to non AT&T phones.
You can try the SEARET or MEARET ICS leak, flash only MEARET and SEARET roms if you are trying to flash back to 2.3.6 eventho it is not recommended.
I don't want this to keep happening and specially if you have no warranty like me, you'll be stuck and you will either have to take it to a repair shop or get a new phone, it's not free like the AT&T ones that have warranty and can get a replacement for free.
Think Twice!
I'm a noob, but trying to help the noob from my experience!
We pay for insurance on our phones each month. It's not free. I've had a att account for over 5 years so they owe me a couple of phones as much extra money they have gotten out of me. This is probably my second warranty exchange.
Sent from my SAMSUNG-SGH-I997 using xda premium
I asked jim same thing and he told me NOT to do it.
Archmag3 said:
I asked jim same thing and he told me NOT to do it.
Click to expand...
Click to collapse
Yeah, it's better not too. Just be patience and wait for the final release. I hope it's a good one.
The Indian ics leak is fine to use.
So use that one, not the at&t.
Sent from my MB865 using Tapatalk 2
lukensteinz said:
The Indian ics leak is fine to use.
So use that one, not the at&t.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
There is indian leak too ?
Archmag3 said:
There is indian leak too ?
Click to expand...
Click to collapse
I guess http://forum.xda-developers.com/showthread.php?t=1758824 applies to Indian version of At 2. But of course, be cautious to apply the changes.
Related
Today, as I'm sure you are all well aware of, official ics 4.0.4 made it way to the Rodgers version of the Skyrocket via Samsung Kies. My question is, couldn't devs take the update and remove the CIQ thus allowing its use for ATT / Unlocked users?
Sent from my soon to be rooted I727
Yes, all we need is cwm zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
why would devs waste their time when att update is also out???
P.S. RoDgers???? its actually Rogers
trolololololol
polish_pat said:
why would devs waste their time when att update is also out???
P.S. RoDgers???? its actually Rogers
trolololololol
Click to expand...
Click to collapse
What do u mean att update is out. I am of the understanding a new leak is to be unveiled by design gears but that isn't the official "Final" build from Samsung
Sent from my soon to be rooted I727
Mike on XDA said:
What do u mean att update is out. I am of the understanding a new leak is to be unveiled by design gears but that isn't the official "Final" build from Samsung
Sent from my soon to be rooted I727
Click to expand...
Click to collapse
Right, there is no official att ics yet.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Give it time, things take time. The as the new update showed it is a newer baseband for rogers as well. The att and rogers are close to the same (radio is not) it just released today give the devs some time to cook things up
Mike on XDA said:
Today, as I'm sure you are all well aware of, official ics 4.0.4 made it way to the Rodgers version of the Skyrocket via Samsung Kies. My question is, couldn't devs take the update and remove the CIQ thus allowing its use for ATT / Unlocked users?
Sent from my soon to be rooted I727
Click to expand...
Click to collapse
CIQ?
pixelens said:
CIQ?
Click to expand...
Click to collapse
Nope
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
pixelens said:
CIQ?
Click to expand...
Click to collapse
Try some google, but here is a link to assist you
http://www.xda-developers.com/android/the-rootkit-of-all-evil-ciq/
The officiel att update it out...google it
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Edit: my bad its the 777
looking for an update to gingerbread 2.3.6 , i went back to stock and it gave me version 2.3.5 , i used the stock tar from sammobile, and now it wont update to 2.3.6 for som reason and i dont see it on sammobile?
Rogers doesn't have ciq.
Sent from my SGS 2 LTE running SkyICS
mr_clean5953 said:
Rogers doesn't have ciq.
Sent from my SGS 2 LTE running SkyICS
Click to expand...
Click to collapse
Second. Only US carriers have CIQ.
Well, that's true and it isn't at the same time, Rogers has it installed (can't speak for all phones), its just not activated.
Sent from my SGH-I727R using XDA
Suminderji said:
Second. Only US carriers have CIQ.
Click to expand...
Click to collapse
Run LogCat you can see CIQ instances all over rogers phones
Where did you see rogers does not have CIQ ?
love ics
i love ics im on SKYICS 4.2E-17(ULCE2) 6/18/12 want to try his new one
I have an Atrix 2 from the U.S. that I am using in Thailand. My current firmware version is 55.13.25.MB865.ATT.en.US. Can I flash the phone to the Asia Retail version without any problems? Is the hardware identical? If yes, how do I go about flashing it?
As I know, you can only flash AT&T fw
Flash others -> soft brick
PhoenixNghi said:
As I know, you can only flash AT&T fw
Flash others -> soft brick
Click to expand...
Click to collapse
Bummer. Thanks for the reply.
Sent from my Astrix 2 using mobile app.
Is there an actual hardware difference?
Quite hard finding the right info
Sent via Tapatalk, Atrix 2 ICS.
Processed by brainmeats.
lukensteinz said:
Is there an actual hardware difference?
Quite hard finding the right info
Sent via Tapatalk, Atrix 2 ICS.
Processed by brainmeats.
Click to expand...
Click to collapse
I think yes, the proof is, while other Atrix 2 such as Chinese version, Indian version have ICS leak, we (AT&T) can not flash these leak, zzz
PhoenixNghi said:
I think yes, the proof is, while other Atrix 2 such as Chinese version, Indian version have ICS leak, we (AT&T) can not flash these leak, zzz
Click to expand...
Click to collapse
Instead of just guessing it would be nice if someone can state some facts and say what the exact differences are. The one they sell in Thailand has the exact same HSDPA/UMTS bands as the AT&T one so I would think they are identical hardware. Someone who actually knows something please enlighten us.
jboxer said:
Instead of just guessing it would be nice if someone can state some facts and say what the exact differences are. The one they sell in Thailand has the exact same HSDPA/UMTS bands as the AT&T one so I would think they are identical hardware. Someone who actually knows something please enlighten us.
Click to expand...
Click to collapse
The two main differences between the international A2s and the AT&T A2 are:
1) Hardware differences. AT&T's A2 has different GPS, radio, and wifi chips than the international A2s.
2) The international A2s and the AT&T A2 have different bootloader signatures... so we would not be able to even begin flashing the fxz in order to flash the ICS update.
PS. Next time please search first ... http://forum.xda-developers.com/showpost.php?p=26978219&postcount=261 http://forum.xda-developers.com/showpost.php?p=28463789&postcount=24 etc etc
cogeary said:
The two main differences between the international A2s and the AT&T A2 are:
1) Hardware differences. AT&T's A2 has different GPS, radio, and wifi chips than the international A2s.
2) The international A2s and the AT&T A2 have different bootloader signatures... so we would not be able to even begin flashing the fxz in order to flash the ICS update.
PS. Next time please search first ... http://forum.xda-developers.com/showpost.php?p=26978219&postcount=261 http://forum.xda-developers.com/showpost.php?p=28463789&postcount=24 etc etc
Click to expand...
Click to collapse
Please be more specific. Give us the manufacturer part numbers for these supposedly different chips. Then we have somewhere to start working from.
Cogeary is dead on my friend, and we didn't engineer the phone so we can't give exactly specific chip numbers and so fourth but yes, he is right, and very reputable.
Even if you some how magically got it to install, you would have no phone calling capabilities due to the radio issue.
Moving to that firmware, is just an impossibility. It'd be a soft brick waiting to happen.
However, it's your call, feel free to flash it! Just make sure you're ready to flash the fxz.
Just be patient and wait for ICS with the rest of us.
Sent from my MB865 using xda premium
I checked some more and the one sold here in Thailand is an ME865, even thought it has the same exact freqs as the ATT one. Different hardware deliminators so definitely some major differences. Yes, I will wait for ICS as I don't want to brick my phone. I had more fun (even though I like the Atrix better) with my LG G2X because with the unlocked bootloader and ability to install CWM recovery to the phone it was virtually unbrickable.
jboxer said:
I checked some more and the one sold here in Thailand is an ME865, even thought it has the same exact freqs as the ATT one. Different hardware deliminators so definitely some major differences. Yes, I will wait for ICS as I don't want to brick my phone. I had more phone (even though I like the Atrix better) with my LG G2X because with the unlocked bootloader and ability to install CWM recovery to the phone it was virtually unbrickable.
Click to expand...
Click to collapse
It's an ME865? You might already have an ICS leak. What's your system version?
cogeary said:
It's an ME865? You might already have an ICS leak. What's your system version?
Click to expand...
Click to collapse
NO. Mine in an MB865 from AT&T USA unlocked and being used in Thailand. What I said is the version sold locally is an ME865. That is why i wanted to know if I could flash the Asian version rom to my phone.
jboxer said:
I checked some more and the one sold here in Thailand is an ME865, even thought it has the same exact freqs as the ATT one. Different hardware deliminators so definitely some major differences. Yes, I will wait for ICS as I don't want to brick my phone. I had more phone (even though I like the Atrix better) with my LG G2X because with the unlocked bootloader and ability to install CWM recovery to the phone it was virtually unbrickable.
Click to expand...
Click to collapse
Oh yeah absolutely bud, My OG droid was unlocked and i loved it.
We are definitely limited with our locked bootloader. But alas, we do what we can!
I have started getting feel that att will leave us deserted, normally after a leak it takes a month to roll out official update but there are no signs for our A2. Motorola is one devil and att is mother of that devil. When other A2 are getting one after other leaks, after a months of cheesecake none of us have any luck. Also motorubbish is not showing any signs of giving us a unlocked bootloader. I am really sick of Motorola policy of giving updates. Now att a2 users can't dream of cm9 or Ics.
I so agree. Everyday I'm checking the forums to my disappointment, no leak. And yes I check cheesecake
Sent from my MB865 using Tapatalk 2
We just have to be patient. Samsung did the same thing with my Infuse. It just got a gingerbread update in February. If they don't update the A2 by Sept then i will start to worry.
Sent from my MB865 using xda premium
Maybe they switched gears and we're getting jb instead. I say this completely sarcastically so don't flame me.
Motorola lied and I'm still locked mb865
mtnlion said:
Maybe they switched gears and we're getting jb instead. I say this completely sarcastically so don't flame me.
Motorola lied and I'm still locked mb865
Click to expand...
Click to collapse
That would be alright. Id wait longer if they did that.
Sent from my MB865 using xda premium
Now Motorola have announced that they will be rolling out ics updates for Indian versions next month it is happening after approximately a month of ics leak.
If att is planning to give us JB, why there are no leaks of that???
prasannapmv said:
Now Motorola have announced that they will be rolling out ics updates for Indian versions next month it is happening after approximately a month of ics leak.
If att is planning to give us JB, why there are no leaks of that???
Click to expand...
Click to collapse
They are being quite sarcastic. We will most likely not see JB in any official manner on this phone. We will need to figure out how to unlock the BL and start running CM 10, to get it.
Sent from my SAMSUNG-SGH-I747 using xda premium
jimbridgman said:
They are being quite sarcastic. We will most likely not see JB in any official manner on this phone. We will need to figure out how to unlock the BL and start running CM 10, to get it.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I am just praying that the work of our devs get successful and we find a way to unlock the bootloader.
prasannapmv said:
I am just praying that the work of our devs get successful and we find a way to unlock the bootloader.
Click to expand...
Click to collapse
That would be me, as right now I am the only one working on it behind the scenes. I have not found a proper way to unlock it yet.
I am working on something to brute force attack it, but that is not for this thread.
Hello All,
I AM REALLY SORRY IF THIS QUESTION HAS BEEN ASKED MANY A TIMES.
I am from India and running the OTA android 4.0.4 on my Motorola Atrix 2. The version is a headache and spoils the fun of using Atrix 2. I was very much happy with speed that 2.3.6 gave me. But one unlucky day I got the 4.0.4 update and never has it been the same then. I am frustrated to the point of selling off my device.
So i would like to ask anyone who can help me out. Is there anyway I can go to the Stock Motorola Atrix 2 android version 2.3.6 or is there any other 4.0.4 cooked ROM that works better than the OTA 4.0.4? and if there is, can it be installed on my device? I have not yet rooted my device.
P.S. if there is anyway to go back to Stock 2.3.6, nothing could be better than that.
Any help regarding this will be really appreciated.
suket123 said:
Hello All,
I AM REALLY SORRY IF THIS QUESTION HAS BEEN ASKED MANY A TIMES.
I am from India and running the OTA android 4.0.4 on my Motorola Atrix 2. The version is a headache and spoils the fun of using Atrix 2. I was very much happy with speed that 2.3.6 gave me. But one unlucky day I got the 4.0.4 update and never has it been the same then. I am frustrated to the point of selling off my device.
So i would like to ask anyone who can help me out. Is there anyway I can go to the Stock Motorola Atrix 2 android version 2.3.6 or is there any other 4.0.4 cooked ROM that works better than the OTA 4.0.4? and if there is, can it be installed on my device? I have not yet rooted my device.
P.S. if there is anyway to go back to Stock 2.3.6, nothing could be better than that.
Any help regarding this will be really appreciated.
Click to expand...
Click to collapse
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
deveshmanish said:
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
The problems I am facing is a lot of lag when flicking through screens, slow downs, non-responsive apps, basically ICS is creating too much stress on the hardware of the phone. I like my phone to run smooth and lag free, so pls suggest me if there are any ROM's that can solve my issues, and if i can upgrade to those ROM's on my OTA ICS 4.0.4... Thanks DeveshMainsh
suket123 said:
The problems I am facing is a lot of lag when flicking through screens, slow downs, non-responsive apps, basically ICS is creating too much stress on the hardware of the phone. I like my phone to run smooth and lag free, so pls suggest me if there are any ROM's that can solve my issues, and if i can upgrade to those ROM's on my OTA ICS 4.0.4... Thanks DeveshMainsh
Click to expand...
Click to collapse
Do a data/ factory reset... ics runs nice and smooth sounds like ur phone needs an old fashioned cleaning out..
Sent from my MB865 using xda app-developers app
I have the same problem with my AT&T Motorola Atrix2. I upgraded it OTA 4 days ago and it is VERY FRUSTRATING!! Its super laggy with lot of lag between flicks, apps open slower and the worst part - once my dialer simply would not place a call on pressing the call button!! What use is a phone that refuses to call??
@Opener did u try factory resetting your phone? Did it help?
@Others, please suggest what I should do. I am a newbie too to android modding so I am not familiar with the currently trending mods/tweaks/cooked roms. Any way to downgrade to 2.3.6? If not, is there any custom firmware that gives better performance?
MenTaLLyMenTaL said:
I have the same problem with my AT&T Motorola Atrix2. I upgraded it OTA 4 days ago and it is VERY FRUSTRATING!! Its super laggy with lot of lag between flicks, apps open slower and the worst part - once my dialer simply would not place a call on pressing the call button!! What use is a phone that refuses to call??
@Opener did u try factory resetting your phone? Did it help?
@Others, please suggest what I should do. I am a newbie too to android modding so I am not familiar with the currently trending mods/tweaks/cooked roms. Any way to downgrade to 2.3.6? If not, is there any custom firmware that gives better performance?
Click to expand...
Click to collapse
First thing to do after update is factory reset..if still your phone is slow apply the awesome v6 supercharger script..my phone is super fast..
Sent from my MB865 using xda app-developers app
There is definitely something wrong with the OTA ICS update. I did many factory resets after the update and performance was unbearable. It seemed to work fine for a little while after the reset, but as soon as I signed into my google account it started giving me fits. I even reset, then created a new google account and it was the same thing. So I reset again and never signed into my account, seemed to work okay for a couple of days, but eventually it was the same performance issues.
I took my phone into the AT&T service center and they knew of the "issue". AT&T ended up replacing the phone under warranty and now I'm back to Gingerbread, kind of wishing I had a stable version of ICS because I really like it.
dmroeder said:
There is definitely something wrong with the OTA ICS update. I did many factory resets after the update and performance was unbearable. It seemed to work fine for a little while after the reset, but as soon as I signed into my google account it started giving me fits. I even reset, then created a new google account and it was the same thing. So I reset again and never signed into my account, seemed to work okay for a couple of days, but eventually it was the same performance issues.
I took my phone into the AT&T service center and they knew of the "issue". AT&T ended up replacing the phone under warranty and now I'm back to Gingerbread, kind of wishing I had a stable version of ICS because I really like it.
Click to expand...
Click to collapse
Could always get on ICS leak #1. If you not satisfied, can always go back to GB. From ICS leak #1 ONLY. Leak #2 and OTA CANNOT get back to GB. You'll only end up with a brick.
Sent from my MB865 using xda premium
A2Trip said:
Could always get on ICS leak #1. If you not satisfied, can always go back to GB. From ICS leak #1 ONLY. Leak #2 and OTA CANNOT get back to GB. You'll only end up with a brick.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
can we go back to gb via custom roms.. actually i am new to atrix2.. i dont know much about recovery roms and stuffs on atrix 2, as far as i know atrix2 is of little problems and low dev support.. i am on ics ota..
farz2farz said:
can we go back to gb via custom roms.. actually i am new to atrix2.. i dont know much about recovery roms and stuffs on atrix 2, as far as i know atrix2 is of little problems and low dev support.. i am on ics ota..
Click to expand...
Click to collapse
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
That's awesome news !! So now we have two confirmed cases of successful fxz from OTA 4.0.4 to GB for AsiaRetail version of our phone.
Sent from my MB865 on rooted ICS leak
anikadam said:
That's awesome news !! So now we have two confirmed cases of successful fxz from OTA 4.0.4 to GB for AsiaRetail version of our phone.
Sent from my MB865 on rooted ICS leak
Click to expand...
Click to collapse
Oh and btw i had flashed the china retail ics fxz while i was on searet ics leak and then back to searet 2.3.6 while i tried out miui on my phone..also fxzd directly from china retail ics to searet ics
Sent from my MB865 using xda app-developers app
devilhunter47 said:
Oh and btw i had flashed the china retail ics fxz while i was on searet ics leak and then back to searet 2.3.6 while i tried out miui on my phone..also fxzd directly from china retail ics to searet ics
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
That is some good news, might get the OTA after all
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
man.. how u do that. As fars i know, everyone ended bricking. i am from india. please help me.
farz2farz said:
man.. how u do that. As fars i know, everyone ended bricking. i am from india. please help me.
Click to expand...
Click to collapse
No big deal..just grab the fxz and flash via rsdlite..that is if your phone isnt at n t
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
man how u do it. as far as i know every one ended bricking please help me..
---------- Post added at 01:43 PM ---------- Previous post was at 01:36 PM ----------
devilhunter47 said:
No big deal..just grab the fxz and flash via rsdlite..that is if your phone isnt at n t
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
i dont understand. are you from kerala. am also. please help me. my phone is ics ota
farz2farz said:
man how u do it. as far as i know every one ended bricking please help me..
---------- Post added at 01:43 PM ---------- Previous post was at 01:36 PM ----------
i dont understand. are you from kerala. am also. please help me. my phone is ics ota
Click to expand...
Click to collapse
Read the beginner's guide under general section..just drop a pm when you are done..oru malayaliye kandathil santhosham
Sent from my MB865 using xda app-developers app
devilhunter47 said:
No..a gb rom needs a gb kernel to run which is possible only through fxz..and for the record i was on Searet OTA and successfully fxzd back to Gb 2.3.6 yesterday..am running sonyav4 now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
devilhunter47 said:
Read the beginner's guide under general section..just drop a pm when you are done..oru malayaliye kandathil santhosham
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
wow thats great.. sounds great. I am from thrissur. mm.. i think its better u give me ur phone number. so i can call u and clear my doubts. if you dont mind ( i am stuck on motorola atrix 2. damn i used lot of android phones before including atrix 4g, htc sensation, sgs2, lg 2x etc.. rooting and flashing, never been a problem for me, even installed android on a n9. but this one, a2 is a real pain. haa i,m stucked please help me ]
farz2farz said:
wow thats great.. sounds great. I am from thrissur. mm.. i think its better u give me ur phone number. so i can call u and clear my doubts. if you dont mind ( i am stuck on motorola atrix 2. damn i used lot of android phones before including atrix 4g, htc sensation, sgs2, lg 2x etc.. rooting and flashing, never been a problem for me, even installed android on a n9. but this one, a2 is a real pain. haa i,m stucked please help me ]
Click to expand...
Click to collapse
why no reply pleaaaaase help me.. now i rooted my ics ota installed bootmenu
flashed cm10, now i am on cm10 bootloop, my bootmenu gone, what i do. please help. i installed cm10 to second system. please help.
which version to flash via rsd. some one please reply..
att atrix2 downgrade
deveshmanish said:
Assuming your atrix2 is the Indian version there have been reports of people having fxz back to GB without bricking.but again i don't have the Indian atrix2 (just the at&t version) so i haven't done this personally.
What problems are you having on ICS maybe they can be sorted out by some tweaks/a custom ROM
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Can you help me pls to downgrade my phone from 4.04 to gb?
My phone is no longer functioning the way it was ever since it was accidentally upgraded to ICS.
It's an AT&T motorola arix2 mb865.
Thanks in advance for your assistance.
hello
well to make it short i bought the atrix 2 from the US early when it came out and then i came to Dubai and all the annoying bloatware for AT&T have became more annoying by (NOT WORKING) when i was leaving i called them and they gave me the unlock code so im using the phone in Dubai, UAE and its working great, im on Victory Rom (Best rom ever) clean and elegant.
---------
now i found there is official ICS firmware for UAE Retails and it has the same number as my phone MB865 so my question is: can i flash that firmware to my AT&T phone ? and incase that is not possible, if i want a clean ICS ROM (made from the official OTA update not the leak) where i can find it ? and lastly if all is not possible what is the cleanest quickest and best ROM and will it work if i update to OTA ICS ?
sorry for taking too long and Thanks in advance
----------
that was what i wrote earlier but now i tried to do OTA and the phone stuck on the dual core technology screen so im thinking to Fxz but i dont know if i should do it for GB 2.3.6 or ICS ?
thanks a lot
Ne-oL said:
hello
well to make it short i bought the atrix 2 from the US early when it came out and then i came to Dubai and all the annoying bloatware for AT&T have became more annoying by (NOT WORKING) when i was leaving i called them and they gave me the unlock code so im using the phone in Dubai, UAE and its working great, im on Victory Rom (Best rom ever) clean and elegant.
---------
now i found there is official ICS firmware for UAE Retails and it has the same number as my phone MB865 so my question is: can i flash that firmware to my AT&T phone ? and incase that is not possible, if i want a clean ICS ROM (made from the official OTA update not the leak) where i can find it ? and lastly if all is not possible what is the cleanest quickest and best ROM and will it work if i update to OTA ICS ?
sorry for taking too long and Thanks in advance
----------
that was what i wrote earlier but now i tried to do OTA and the phone stuck on the dual core technology screen so im thinking to Fxz but i dont know if i should do it for GB 2.3.6 or ICS ?
thanks a lot
Click to expand...
Click to collapse
To be very honest with you and AFAIK no one had tried to fxz to ICS from GB.but in theory it should work.
But this is what I'll suggest fxz to 2.3.6 and try OTAing.it should take you to ICS directly.
Sent from my MB865 using xda premium
deveshmanish said:
To be very honest with you and AFAIK no one had tried to fxz to ICS from GB.but in theory it should work.
But this is what I'll suggest fxz to 2.3.6 and try OTAing.it should take you to ICS directly.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
thanks but that only answers my last question, would you mind to read the second paragraph (sorry for the trouble) to see if you have any answers ?
Ne-oL said:
thanks but that only answers my last question, would you mind to read the second paragraph (sorry for the trouble) to see if you have any answers ?
Click to expand...
Click to collapse
Ok so get this very clear if you phone it's AT&T one(it has AT&T written on the bottom) then you can't flash any other firmware.your only option is the AT&T firmware( from here).
And there are lots of ROMs that you can try.
StockyEd is pure OTA version of ICS.
Others are Numa, swifty trix ,scv7.Also we have CM10.
Sent from my MB865 using xda premium