Hello,
Here I have a desire s that is s-off with HBOOT 0.98 and is stuck on the htc logo
I tried to put it into the s-on to install an official rom, but I think the fastboot and HBOOT do not work, because I run an RUU, or I try to flash with fastboot is the phone hangs or I receive an error message like "writing 'recovery' ... FAILED (remote: not allowed)"
I note that I have not access to recovery and I could not flash it
HBOOT blocks when I try to flash it or do an update pg88img.zip from sd card
flash by fastboot also blocks
and when I try to do a factory reset it also blocks
Can somebody help me please ?
(translate with google)
I need help please
C:\android-sdk-windows>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.98.0002
INFOversion-baseband: 3805.06.02.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.47.771.2
INFOserialno: SH1AVTJ00237
INFOimei: 358967042301901
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG88*****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4005mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 0e35ea5b
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: 0.016s
maybe you have fried your emmc chip, here you can find a kind of workaround http://forum.xda-developers.com/showthread.php?t=1756287
Thank's
the same probleme "C:\Android-win-tools>fastboot boot bootsd.img
downloading 'boot.img'... OKAY [ 0.766s]
booting... FAILED (remote: not allowed)
I need your help thank you
no commands are accepted in HBOOT and fastboot
You are trying to flash with fastboot commands from HBOOT screen, and have been unable or too lazy to figure it out by a simple Google search with the words you're reading as the command fails.
Open Youtube, look for a video of any HTC phone that shows how to flash using fastboot, do the same.
Learning to search before posting will save you days that you will spend waiting for answers.
that's what you think, I often flash htc to learn better android system and specially the htc
I typed all the errors I got on google and I still have not found the right solution
So if anyone can help me ...
Identify your hboot version fron your phone's screen.
Sent from my HTC Desire S using xda app-developers app
hboot: 0.98.0002
Thank's
Strange version. It's not eng HBOOT (eng is 0.98.2000), so fastboot won't work and isn't expected to.
Get into fastboot mode, and flash an RUU (run RUU.exe). Write down and post the error from the log.
when I try to install an RUU it gets stuck on "Trying to reboot in bootloader" and the phone remains locked until I removed the battery
thank you very much
octopus82 said:
INFOversion-bootloader: 0.98.0002
INFOcidnum: 11111111
INFOsecurity: off
Click to expand...
Click to collapse
Looks like xtcclip S-OFF. IMO there's no way to go back to S-ON.
Try to flash an ENG hboot like 2.00.2002 to be able to flash others parts like recovery or any partition.
octopus82 said:
when I try to install an RUU it gets stuck on "Trying to reboot in bootloader" and the phone remains locked until I removed the battery
thank you very much
Click to expand...
Click to collapse
Even though you start RUU in FASTBOOT screen?
In that case, I don't know if any help can be given. If it locks up upon any attempt to reboot it - something is deeply wrong with it.
And yes, looks like you're unlocked by XTC-clip, it's the only way to get SuperCID (cid=11111111). So no S-ON will be possible anyway. Try to use the warranty on this phone.
chninkel said:
Looks like xtcclip S-OFF. IMO there's no way to go back to S-ON.
Try to flash an ENG hboot like 2.00.2002 to be able to flash others parts like recovery or any partition.
Click to expand...
Click to collapse
I tried to flash some HBOOT with this command "fastboot flash HBOOT hboot.img" but I always had the same error message
if you can give me a link to download eng HBOOT and a good method for flash would be nice
thank you
Jack_R1 said:
Even though you start RUU in FASTBOOT screen?
In that case, I don't know if any help can be given. If it locks up upon any attempt to reboot it - something is deeply wrong with it.
And yes, looks like you're unlocked by XTC-clip, it's the only way to get SuperCID (cid=11111111). So no S-ON will be possible anyway. Try to use the warranty on this phone.
Click to expand...
Click to collapse
yes, I run the RUU in fastbootusb
For the rest I do sauraus tell you how he was flashed
For the warranty I think it is not possible, there is no service htc here, the phone was purchased in another country
You think that there is no solution or there is still hope?
thank you
You could try with the file attached. Rename it PG88IMG.zip, put it on the root of sdcard, reboot bootloader and hit power to accept the update. And ofc hope.
the phone does not want to turn on! and it's not mine!
Is there a way to recover it?!
thank you
P.S: I do not know if the battery has discharged completely, either because I took the battery while the phone was on the htc logo
octopus82 said:
took the battery while the phone was on the htc logo
Click to expand...
Click to collapse
If you have no led when charging, no vibration, nothing. You have probably fried your emmc chip while pulling out the battery. This is a known problem with the desire S and the worst case as you need to change the motherboard.
when I start charging the red light comes on, and when I remove the charger it stays always on
, but no vibration
Is there a solution to turn it on again?
thank you
Related
Hi,
I can't turn on my phone which still on fastboot usb mode.
Phone is S-ON and not rooted, has hboot 0.98.0002.
I can't use RUU to flash my phone because the misc version is 12.10.401.5. I'm trying to change it but i cannot. Also, I can't use recovery because I've done a full wipe.
When I use commands "adb devices", there is no device. But, When I used FastbootCommanderV.1.51, I can see my device.
I can see now on phone:
***Security warning***
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0002
RADIO-3822.10.08.04_M
eMMC-boot
Mar 30 2011,17:29:31
FASTBOOT USB ...
Please, help me.
Use RUU 2.10.401.8
amidabuddha said:
Use RUU 2.10.401.8
Click to expand...
Click to collapse
I tried RUU_Saga_S_HTC_Europe_2.10.401.8 but I've Error 140 about bootloader.
Problems come from bootloader which is locked. I've not recovery mode and can't do anything because phone is S-ON and not rooted.
If only I could change my misc_version ...
fulbert said:
Problems come from bootloader which is locked. I've not recovery mode and can't do anything because phone is S-ON and not rooted.
If only I could change my misc_version ...
Click to expand...
Click to collapse
To change it use this procedure
Give some info how did you came to this situation. It is strange to have this version with the old booltoader.
Yes, I want to give you more details but I'm not fluent in english. So I try to tell you better I can.
Phone had Endymion v3.1 rom. I noticed today that I couldn't take pictures. So I try to install another rom. After format all partition (without sdcard) and a full wipe, I flash hboot with original hboot 0.98.002. The phone has rebooted by mistake (poor handling). Unfortunately, phone become S-ON and can't do anything.
I look the procedure but don't understand:
3. tempRoot with zergRush, change version with misc_version
Click to expand...
Click to collapse
1. I downloaded only zergRush.zip and copy file into zip into c:\downgrade. Is it correct?
2. I can't connect phone in debug mode. How can I do?
Thanks.
fulbert said:
Yes, I want to give you more details but I'm not fluent in english. So I try to tell you better I can.
Phone had Endymion v3.1 rom. I noticed today that I couldn't take pictures. So I try to install another rom. After format all partition (without sdcard) and a full wipe, I flash hboot with original hboot 0.98.002. The phone has rebooted by mistake (poor handling). Unfortunately, phone become S-ON and can't do anything.
Click to expand...
Click to collapse
Wow. Anyway there is no undo here
1) Try to S-OFF with Revolutionary
2) Flash this hboot
3) Download a RUU for your region from here and run it on your PC
For step 3 is best to be sure that the RUU is the proper one. Connect your phone to PC (you need fastboot configured - see in my signature). Then type in command prompt:
Code:
fastboot getvar all
paste the output here
Hi, the output of command:
C:\ANDROID>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.98.0002
INFOversion-baseband: 3822.10.08.04_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 12.10.401.5
INFOserialno: SH14STJ03111
INFOimei: 35X067X466X23X5
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: BOUYG201
INFObattery-status: good
INFObattery-voltage: 4191mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 0e35ea5b
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
As I told you, I can't use revolutionary. When I try, I've this message:
"Waiting for device...".
When I try to flash the hboot, I have this message: "error: device not found"
For RUU, I've tried with these RUU:
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed.exe
RUU_Saga_Bouygues_FR_1.31.1020.2_Radio_20.28c.30.0805U_38.03.02.16_M_release_179953_signed.exe
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed.exe
RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed.exe
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
Tnx.
fulbert said:
Hi, the output of command:
As I told you, I can't use revolutionary. When I try, I've this message:
"Waiting for device...".
When I try to flash the hboot, I have this message: "error: device not found"
For RUU, I've tried with these RUU:
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed.exe
RUU_Saga_Bouygues_FR_1.31.1020.2_Radio_20.28c.30.0805U_38.03.02.16_M_release_179953_signed.exe
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed.exe
RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed.exe
RUU_Saga_S_HTC_Europe_2.10.401.8_Radio_20.4801.30.0822U_3822.10.08.04_M_release_225161_signed.exe
Tnx.
Click to expand...
Click to collapse
You cannot flash hboot with S-ON. DO not try to flash European RUU either. Yours is RUU_Saga_Bouygues_FR_1.31.1020.2_Radio_20.28c.30.0805U_38.03.02.16_M_release_179953_signed.exe
Since you deleted everything and no adb your last resort is a goldcard. Find someone with the same software version as you to give you a cid number. Make a Goldcard put it in your phone, run the RUU on the PC and hope for the best
I can't unlock the bootloader because, I get:
C:\ANDROID>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY
writing 'unlocktoken'... INFOsignature checking...
FAILED (remote: signature verify fail)
C:\ANDROID>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
Click to expand...
Click to collapse
fulbert said:
I can't unlock the bootloader because, I get:
Click to expand...
Click to collapse
Thank you for this (clicked the wrong button)
try with goldcard
I'm on another computer and I see that I haven't all drivers on it. Windows XP try to install drivers about android and can't. Where can I found this drivers? I install HTC Sync and need to reboot. I'll tell you if all it's OK in a few minutes.
fulbert said:
I'm on another computer and I see that I haven't all drivers on it. Windows XP try to install drivers about android and can't. Where can I found this drivers? I install HTC Sync and need to reboot. I'll tell you if all it's OK in a few minutes.
Click to expand...
Click to collapse
Computer tries to install Android 1.0 driver but can't. Where can I found it?
android usb driver
fulbert said:
Computer tries to install Android 1.0 driver but can't. Where can I found it?
Click to expand...
Click to collapse
here you go .
View attachment 831249
same problem buy a xtc clip
hi fullbert
i had the same problem as you are having now,i also did everything the same way as you did ,i even went to http://webchat.freenode.net/?channels=revolutionary but no one even took the time to answer/help me, think there are only bots in there. so the last thing i could do was buy me a xtc clip and i managed to get my phone S-OFF again.
problem with the RUU roms is that you cant install because of the INFOversion-main: 12.10.401.5,it always says main version is older.
bad-wimpie said:
hi fullbert
i had the same problem as you are having now,i also did everything the same way as you did ,i even went to http://webchat.freenode.net/?channels=revolutionary but no one even took the time to answer/help me, think there are only bots in there. so the last thing i could do was buy me a xtc clip and i managed to get my phone S-OFF again.
problem with the RUU roms is that you cant install because of the INFOversion-main: 12.10.401.5,it always says main version is older.
Click to expand...
Click to collapse
So there is no solution other than xtc-clip?
People know that it's a problem with INFOversion-main,so our developpers have perphaps something about it to solve my problem, isn't it?
well no solution i tried worked and i have done a lot of flashing and couldnt use adb commands as fastboot did work but got security problem or remote not allowed main version is older and i was S-ON but i hoop the devs can help you .
I hope and wait because it's will be difficult for me to get ou use xtc-clip before july 2012. So, I wait another solution.
always nothing ...
not really sure what i've done but i have bootloader and 4ext recovery and s-on i can flash things but nothing boots even pushing boot.img....also i'm on hboot 1.27 which doesnt help
i guess i need the most up to date ruu.exe to fix this? i'm on orange uk
please anyone help will be happy to donate money to whoever can help
dextninja said:
not really sure what i've done but i have bootloader and 4ext recovery and s-on i can flash things but nothing boots even pushing boot.img....also i'm on hboot 1.27 which doesnt help
i guess i need the most up to date ruu.exe to fix this? i'm on orange uk
please anyone help will be happy to donate money to whoever can help
Click to expand...
Click to collapse
R u super cid 11111111
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
dextninja said:
not really sure what i've done but i have bootloader and 4ext recovery and s-on i can flash things but nothing boots even pushing boot.img....also i'm on hboot 1.27 which doesnt help
i guess i need the most up to date ruu.exe to fix this? i'm on orange uk
please anyone help will be happy to donate money to whoever can help
Click to expand...
Click to collapse
As long as you can go into bootloader your phone is not bricked and can be made to work properly so no worries.
Can you give more info please
Post all the details that's present in hboot
If you have adb/fastboot setup then put the phone in fastboot and connect it to your pc
And
Type this command
fastboot getvar all
Post all the output here except imei and serial number
Also please tell me what rom you installed lastly
Sent from my pyramid.. Through blazing fast sonic waves
dextninja said:
not really sure what i've done but i have bootloader and 4ext recovery and s-on i can flash things but nothing boots even pushing boot.img....also i'm on hboot 1.27 which doesnt help
i guess i need the most up to date ruu.exe to fix this? i'm on orange uk
please anyone help will be happy to donate money to whoever can help
Click to expand...
Click to collapse
No need for donations just go to this thread falloW the steps carfully and. U will be fine if u didn't upgrade to ics yet here is the link http://forum.xda-developers.com/showthread.php?p=16125079
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
ok here is all my details...
C:\android>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4166mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.500s
*** unlocked ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
jan 13 2012, 17:33:34
no super cid111111 and i'm on ics last thing i flashed that worked was a sense 4 rom that i installed through boot manager then when i flashed a rom properly it all when bad and now wont load anything
dextninja said:
ok here is all my details...
C:\android>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4166mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.500s
*** unlocked ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
jan 13 2012, 17:33:34
no super cid111111 and i'm on ics last thing i flashed that worked was a sense 4 rom that i installed through boot manager then when i flashed a rom properly it all when bad and now wont load anything
Click to expand...
Click to collapse
ok you flashed the sense 4 rom through boot manager right....not dual boot right
did you have the rom zip file ?
is so ..extract the boot.img from the custom rom's zip file ( generally in kernels folder ..if it has more than 1 boot.img the choose the one of your choice)
keep the boot.img file in your adb folder (pc)
then go to fastboot on your device ..connect it to your pc
then on pc
type this
fastboot flash boot boot.img
then reboot
to reboot
fastboot reboot
chk it and see ..if this solves your problem
ganeshp said:
ok you flashed the sense 4 rom through boot manager right....not dual boot right
did you have the rom zip file ?
is so ..extract the boot.img from the custom rom's zip file ( generally in kernels folder ..if it has more than 1 boot.img the choose the one of your choice)
keep the boot.img file in your adb folder (pc)
then go to fastboot on your device ..connect it to your pc
then on pc
type this
fastboot flash boot boot.img
then reboot
to reboot
fastboot reboot
chk it and see ..if this solves your problem
Click to expand...
Click to collapse
i think i tried this like million times but when i tried just then it actully loaded into the bootscreen....................
AND BOOTED!!!!!!
dextninja said:
i think i tried this like million times but when i tried just then it actully loaded into the bootscreen....................
AND BOOTED!!!!!!
Click to expand...
Click to collapse
i presume it worked for you...
from now on if you flash any other rom..then you have to repeat the above process...to avoid any other problems
time to make a back up hahah
anything else i should do?
thank you guys so much i was just about to throw my "brick" through a window hahaha
Following your advice after "Bricking mine" i have managed to get further than before.
I can access Recovery, if i let it boot normally it comes up with Juopunutbea sreen.
However Recovery is unable to mount my SD card to do anything else and Juopunutbea wont find my device.
I am hoping i am able to recover it still?
I am currently unable to check the SD card but I am very worried and just seeking advice for reassurance.
In theory, if my SD card is now dead I should be able to use the recovery img i have on my C drive i have got from following a guide or the boot/recovery image from Juopunutbea folder?
I was slightly foolish when i was rooting it.
I completed the unlock and recovery successfully
But when rooting it with Juopunutbea it said to use the wire trick. I still had the back on! I was hoping i could take the back off to do so but ended up removing the USB cable, hoping for the best.
I fear my SD card is dead but my phone is still recoverable
(Apologies in advance if this is a complete noob question but as said i am very worried and looking for advice and reassurance)
Thanks
Shortstuff-Tom said:
Following your advice after "Bricking mine" i have managed to get further than before.
I can access Recovery, if i let it boot normally it comes up with Juopunutbea sreen.
However Recovery is unable to mount my SD card to do anything else and Juopunutbea wont find my device.
I am hoping i am able to recover it still?
I am currently unable to check the SD card but I am very worried and just seeking advice for reassurance.
In theory, if my SD card is now dead I should be able to use the recovery img i have on my C drive i have got from following a guide or the boot/recovery image from Juopunutbea folder?
I was slightly foolish when i was rooting it.
I completed the unlock and recovery successfully
But when rooting it with Juopunutbea it said to use the wire trick. I still had the back on! I was hoping i could take the back off to do so but ended up removing the USB cable, hoping for the best.
I fear my SD card is dead but my phone is still recoverable
(Apologies in advance if this is a complete noob question but as said i am very worried and looking for advice and reassurance)
Thanks
Click to expand...
Click to collapse
Juopunutbear won't brick.. Your device...
Get another cheap sdcard and try jb again... You are good to go..
Use this guide to soff
http://forum.xda-developers.com/showthread.php?t=1614617
Sent from my pyramid.. Through blazing fast sonic waves
ganeshp said:
Juopunutbear won't brick.. Your device...
Get another cheap sdcard and try jb again... You are good to go..
Use this guide to soff
http://forum.xda-developers.com/showthread.php?t=1614617
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Thank you
I managed to recover the SD card, well 14GB of the 16GB
However it still would not get recognised by jb
I connected it to my PC and load a boot back up img i had.
It now loads and accepts other SIM cards, Which is all i need as i am swapping it for a Wildfire
dextninja said:
time to make a back up hahah
anything else i should do?
thank you guys so much i was just about to throw my "brick" through a window hahaha
Click to expand...
Click to collapse
nice to know it worked for u
Hey guys,
Recently got a sensation, and i am stuck on the HTC screen.
I was able to get the bootloader unlocked, and installed CWM with no issues. I install roms, but after reboot, it just stays stuc at the white HTC screen.
For some reason, my phone has a unlocked bootloader, has S-ON and will not boot into ANYTHING besides the bootloader and CWM.
Ive tried many stock roms for it, with no luck !
I have also tried flashing boot.img and the PG185 file with ADB, which starts working, but for image i get a error that says FAILED - Remote signature verify failed.
So, how can i get S OFF ? And also i think my radio went MIA ! Here is the info :
INFOversion: 0.5
INFOversion-bootloader: 1.18.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.50.531.1
INFOserialno: SH18VT504086
INFOimei: 355066049767603
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5810000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 4105mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 9d24123f
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.490s
Can you guys please hep me find the right PG185 file, a compatible rom with the stock kernel just to get this working ? I have flashed many phones like the HD2, Galaxy SII and the Galaxy Nexus with ZERO problems ! I just find this one a bit hard and i have been trying for HOURS (atleast 7-10 hours =/)
Any help will be APPRECIATED !
You should use the tool at http://revolutionary.io to obtain S-OFF then flash a 3.33 firmware from the thread in the dev section. Then you can flash a ROM. The reason its not booting now is because ICS ROM's wont boot on GB firmware, hence the need to flash the 3.33 firmware
saadkhan07 said:
Hey guys,
Recently got a sensation, and i am stuck on the HTC screen.
I was able to get the bootloader unlocked, and installed CWM with no issues. I install roms, but after reboot, it just stays stuc at the white HTC screen.
For some reason, my phone has a unlocked bootloader, has S-ON and will not boot into ANYTHING besides the bootloader and CWM.
Ive tried many stock roms for it, with no luck !
I have also tried flashing boot.img and the PG185 file with ADB, which starts working, but for image i get a error that says FAILED - Remote signature verify failed.
So, how can i get S OFF ? And also i think my radio went MIA ! Here is the info :
INFOversion: 0.5
INFOversion-bootloader: 1.18.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.50.531.1
INFOserialno: SH18VT504086
INFOimei: 355066049767603
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5810000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 4105mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 9d24123f
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.490s
Can you guys please hep me find the right PG185 file, a compatible rom with the stock kernel just to get this working ? I have flashed many phones like the HD2, Galaxy SII and the Galaxy Nexus with ZERO problems ! I just find this one a bit hard and i have been trying for HOURS (atleast 7-10 hours =/)
Any help will be APPRECIATED !
Click to expand...
Click to collapse
Do you have 4ext recovery? I was having the same problem even with s-off I couldn't boot any Rom but the one I had all I had to do was flash a kernel throughy recovery with smart flash eneabled after installing a Rom and also download superwipe and flash that before flashing a Rom I did all these steps to get a Rom booted up
Sent from my Sensation Z710e using xda app-developers app
I dont have 4EXT...how can i flash that ?
I was able to flash a stock recovery img to the phone via ADB. That worked..and CWM is now missing.
I tried looking for 4EXT..but couldnt find it. Can i flash that via ADB as well ?
saadkhan07 said:
I dont have 4EXT...how can i flash that ?
I was able to flash a stock recovery img to the phone via ADB. That worked..and CWM is now missing.
I tried looking for 4EXT..but couldnt find it. Can i flash that via ADB as well ?
Click to expand...
Click to collapse
Search the market for 4EXT
or search the dev section for 4EXT (I know for a fact that there is a thread in the dev section for it, its just a few pages in so use the search function)
Jonny,
I did see it on the market, but since its a APK, i cant download and use it.
How can i flash it through ADB ? as that is the only option i think i have. Even CWM is gone now, unless i flash that through ADB too...
Ok,
I have now gotten 4EXT to work on the phone. I am still S-ON and running 1.18 hboot. I tried to flash again through ADB with no luck. How can i obtain S-OFF without having a rom ? I even tried o install a GB Rom, and the same stuff happens, HTC white screen, then reboot.
I know i am a bit closer to success !
saadkhan07 said:
Ok,
I have now gotten 4EXT to work on the phone. I am still S-ON and running 1.18 hboot. I tried to flash again through ADB with no luck. How can i obtain S-OFF without having a rom ? I even tried o install a GB Rom, and the same stuff happens, HTC white screen, then reboot.
I know i am a bit closer to success !
Click to expand...
Click to collapse
Run the following command please;
fastboot getvar all
Then print the result here, exluding imei and serial numbers
For a statr things will be much easier if you flash the ENG HBOOT through bootloader using an appropriate PG58IMG.zip,Use search to find it. This way you can fastboot flash the radio.img
re
bonesy said:
For a statr things will be much easier if you flash the ENG HBOOT through bootloader using an appropriate PG58IMG.zip,Use search to find it. This way you can fastboot flash the radio.img
Click to expand...
Click to collapse
I have tried flashing PG58IMG through ADB, and i always get a signature error. I have spend countless hours trying to find the right one. What do you mean by ENG HBOOT ?
I tried to flash 1.17 and 1.27 with no luck
With s on when you flash you will also need to enable smart flash in your 4ext recovery.
Sent from my HTC Sensation 4G using xda premium
so,
Boot into RECOVRY
ENABLE 4EXT smart flash
install rom
reboot ?
I did that with no luck. On my 1.18 hboot i tried installing a stock ics rom, and also a GB rom
OP here this should perfectly work
1.relock the bootloader (fastboot oem lock)
2.get the GB ruu of tmobile US from this post http://forum.xda-developers.com/showpost.php?p=29181325&postcount=20
3.also flash the RUU as per told in the above post
4.once you got booted ..do soff via revolutionary
5.if revolutionary failed with zerg root error ..use kgs tool(sticky in android development section) and do soff again (he has tacoroot method)
ganeshp said:
OP here this should perfectly work
1.relock the bootloader (fastboot oem lock)
2.get the GB ruu of tmobile US from this post http://forum.xda-developers.com/showpost.php?p=29181325&postcount=20
3.also flash the RUU as per told in the above post
4.once you got booted ..do soff via revolutionary
5.if revolutionary failed with zerg root error ..use kgs tool(sticky in android development section) and do soff again (he has tacoroot method)
Click to expand...
Click to collapse
Thanks, I am going to try this when i go back home. This seems like it WILL work. Much appreciated !
I have an inspire 4g which is stuck on white screen with s-on... i have tried my possible best. downloaded ruu but ends in error 130... cant unlock bootloader... please help. anyone
here are my details
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
sEP 7 2011,19:06:24
SOFTWARE: 3.13.661.4
CID: TELUS001
You need to update your bootloader to .29 to unlock it. What RUU are you trying to run?
bananagranola said:
You need to update your bootloader to .29 to unlock it. What RUU are you trying to run?
Click to expand...
Click to collapse
Please how do I update bootloader when am stuck. Is there something for me to flush...how do I flush when recovery isn't working for me. Am totally lost. Please help!
I used this RUU
RUU_Ace_Sence30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29.26.14.04.28_M_release_225512_signed.
Thanks for the reply friend. I appreciate it...
How did you phone end up in that state? You can only run a RUU that matches your phone's region. To run other RUUs, you need to make a goldcard. You run RUUs from fastboot, not recovery.
bananagranola said:
How did you phone end up in that state? You can only run a RUU that matches your phone's region. To run other RUUs, you need to make a goldcard. You run RUUs from fastboot, not recovery.
Click to expand...
Click to collapse
A friend tried flashing, it turned out bad...he got no idea how return the phone to it original state.
Yes I run the RUU from Fastboot but I keep on getting error 130. Wrong Rom.... How do I make a goldcard.? And what do I do with it next? Still on white screen
freexrythem said:
A friend tried flashing, it turned out bad...
Click to expand...
Click to collapse
Er...this isn't very specific. Try another RUU, one that matches your region.
bananagranola said:
Er...this isn't very specific. Try another RUU, one that matches your region.
Click to expand...
Click to collapse
Am currently in Ghana, Africa....I already tried 6 different RUU...all ending in error130. Could you kindly help me with the link to my specific type of RUU. And u did also mention about my bootloader having to be updated.... To unlock it.
freexrythem said:
Am currently in Ghana, Africa....I already tried 6 different RUU...all ending in error130. Could you kindly help me with the link to my specific type of RUU. And u did also mention about my bootloader having to be updated.... To unlock it.
Click to expand...
Click to collapse
The RUU comes with a bootloader. If you use the newest RUU your bootloader will update as well. I don't know all the RUUs, but there's an index thread in the development forums with a link to a bunch of RUUs. If you cant find a matching one make a goldcard. There's a thread for that in General, I think. And it should match the phone region, not your current region. So it depends where the phone came from.
bananagranola said:
The RUU comes with a bootloader. If you use the newest RUU your bootloader will update as well. I don't know all the RUUs, but there's an index thread in the development forums with a link to a bunch of RUUs. If you cant find a matching one make a goldcard. There's a thread for that in General, I think. And it should match the phone region, not your current region. So it depends where the phone came from.
Click to expand...
Click to collapse
The bunch of RUUs is where I got that one from. Being the latest but I still end up with error 130. Wrong Rom. I read about making a gold card but I don't thing having the state my phone is now will allow me to do so because I can't access Usb debugging etc. Is there a way to check which RUU is specific to my phone? Using my bootloader information above?
fastboot getvar all. Delete IMEI.
bananagranola said:
fastboot getvar all. Delete IMEI.
Click to expand...
Click to collapse
Am sorry but am a bit lost. Am a novice. Just got that much from few days of going through xda. Can u kindly tell me step by step procedure to do that...
freexrythem said:
Am sorry but am a bit lost. Am a novice. Just got that much from few days of going through xda. Can u kindly tell me step by step procedure to do that...
Click to expand...
Click to collapse
Put your phone in fastboot mode, hook it up to the computer, find fastboot in the SDK in your computer, open a command line prompt, type "fastboot getvar all", paste it here, and make sure to delete the IMEI line. Also, how did your phone get in that state?
bananagranola said:
Put your phone in fastboot mode, hook it up to the computer, find fastboot in the SDK in your computer, open a command line prompt, type "fastboot getvar all", paste it here, and make sure to delete the IMEI line. Also, how did your phone get in that state?
Click to expand...
Click to collapse
An friend accidentally tried to s-off which went wrong. Now I have a brick phone. Still s-on, can't unlock bootloader, can't run RUU because I can't find the right one, tried everything...still white screen.
freexrythem said:
An friend accidentally tried to s-off which went wrong. Now I have a brick phone. Still s-on, can't unlock bootloader, can't run RUU because I can't find the right one, tried everything...still white screen.
Click to expand...
Click to collapse
Wait, how long is it taking for your phone to get into bootloader? And which method did you use: the manual method, the retired AAHK, or the new AAHK2?
bananagranola said:
Wait, how long is it taking for your phone to get into bootloader? And which method did you use: the manual method, the retired AAHK, or the new AAHK2?
Click to expand...
Click to collapse
It doesn't take that long to get into bootloader. I thought of unlocking the bootloader before installing RUU which didn't work. I got an error on the step that involved token....I tried several time and still got that error. I read about that problem and thought its because of my Hboot version. U said ealier I needed to update my hboot.
I can't even turn on usb debugging or but the phone on charge default. If that was possible I could S-off and flash rom.
I can't use htcdev to unlock bootloader, I can't install RUU, I can't flash recovery because am S-on and am still stuck at white screen. I feel am losing this phone now...
1. You did not make or try to make a goldcard like I said.
2. You did not post the results of fastboot getvar all like I asked.
3. You cluttered up the forums with not one but two new threads instead of continuing in the one you already have.
Reported and giving up.
bananagranola said:
1. You did not make or try to make a goldcard like I said.
2. You did not post the results of fastboot getvar all like I asked.
3. You cluttered up the forums with not one but two new threads instead of continuing in the one you already have.
Reported and giving up.
Click to expand...
Click to collapse
I apologized for that. I realized it was a mistake to do that. I didn't know how to make a gold card. I tried a software which warrant that the phone be put on usb debugging.
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.661.4
INFOserialno: SH19ETZ00038
INFOimei: *secret*
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9814000
INFOcidnum: TELUS001
INFObattery-status: good
INFObattery-voltage: 3935mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.031s
I don't know how to create a goldcard without a phone. All the other methods make use of the phone. But my phone is soft bricked.
freexrythem said:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.661.4
INFOserialno: SH19ETZ00038
INFOimei: *secret*
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9814000
INFOcidnum: TELUS001
INFObattery-status: good
INFObattery-voltage: 3935mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.031s
I don't know how to create a goldcard without a phone. All the other methods make use of the phone. But my phone is soft bricked.
Click to expand...
Click to collapse
You do need a working device to create a goldcard. BTW, how did you end like this?
glevitan said:
You do need a working device to create a goldcard. BTW, how did you end like this?
Click to expand...
Click to collapse
I got it in this state from a friend when he volunteered to S-off. Messed up the phone and he has no clue how to fix it.
Am S-on, can't install RUU...tried about 6 different RUUs always ending in Error 130 (wrong ID model). So am trying to create a gold card. But it seem as you said... I need a working phone. I got a working phone got the CID and Reverse CID but can't go paste it in the next step which involve opening up the website because the website seem to not to be working. Am left without how to obtain the IMG image to patch my card and use it to install the RUU rom.
What do I do from here?
UPDATE: Phone is in QHSUSB_DLOAD mode. I've tried HTC Unbricking Project but it didn't detect my phone. Also I've tired the Ultimate Recovery tool Unbrick and it also didn't help.
I guess the only solution is JTAG / New phone.
Hello,
I think I'm in a real big trouble.
background story:
I was on ARHD 7.3, S-off, Firmware 3.33 Uni. Suddenly after about a month of use, phone started to lose signal. I could recover the signal only with a reboot (hidden menu options and airplane mode didn't help).
I thought it was a problem with the ROM so I've installed an Official RUU RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.33.401.153 after installing 3.33.401.x firmware. This didn't solve the problem I had, signal still was going off few times a day and each time I had to reboot. Furthermore, I've lost my IMEI Number, I got a new IMEI number 355195000000017 which I googled and found more people with that number. However the IMEI change didn't interrupt anything.
Realizing that RUU didn't help I've decided to go back to Mike's ROM ARHD 7.3. (after unlocking bootloader again and etc..)
Then the problem started:
com.google.process.gapps and acore.process.android and basically all the phone started to crash. Nothing helped, I've tried to reflash ROM, reflash Google Package, Nothing. Suddenly, the phone was bricked. won't charge, won't boot.
However a very strange thing happened. Suddenly I could boot Into HBOOT (maybe the phone didn't had enough battery power before).
But the HBOOT was getting stuck, I couldn't do anything So I've used the Ultimate Recovery Tool and downgraded my HBOOT. (http://forum.xda-developers.com/showthread.php?t=1653777)
The Problem now:
1. I can go to 4EXT recovery but it won't let me flash any ROM, installing is aborted.
2. HBOOT won't let me flash any recovery, boot, etc saying permission denined.
3. Rebooting bootloader doesn't work, it goes just to a black screen with backlight on.
4. I've tried to change firmware with PG58IMG it won't update saying hboot partition update failed failed-pu
5.I've tried to install the previous RUU @fastboot but it says battery power below 30%. I've checked the voltage it was around 3800~ and in the recovery it had like 50% so I don;t think problem lies here.
Information about HBOOT:
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.49.0007 <--- Bad Bad HBOOT, I know I did a mistake here. This Hboot is for Evo 3D GSM.
RADIO-11.24.3504.31_M
OPENDSP- BLAH BLAH BLAH
eMMC-boot
I don't think I have SuperCID. when I type the command fastboot getvar cid and getvar all I see the CID number is 0418.
However, when I type fastboot oem readcid I get 11111111.
I've tried to change to superCID but again, permission denined.
I'm thinking maybe if I could somehow change the superCID then I could update the firmware and then I could run the RUU?
Or can I somehow via linux box flash a different HBOOT?
Thank everyone who read this long story
I would be truly grateful for anyone who tries to help me.
EDIT: Phone Info:
[email protected]:~# ./fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.49.0007
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 0.33.401.106
INFOserialno: SH19XV803513
INFOimei: 355195000000010
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG58*****
INFOcidnum: 0418
INFObattery-status: good
INFObattery-voltage: 4000mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: edba812f
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
[email protected]:~# fastboot oem readcid
... INFOcid: 11111111
OKAY
Click to expand...
Click to collapse
failed-pu
man is a serious problem AFAIK
did you try to reflash ruu.exe or install 3.33 universal firmware again?
did they show you failed-pu again?
edit: what hboot version is that?
edit 2: why did you use a tool from htc evo 3D forum?
since you are on S-OFF and supercid you could use any ruu.exe you wanted including GB's one
that would take care also of your hboot version(gingerbread ruu->hboot downgrade)
Thanks for your reply,
rzr86 said:
failed-pu
man is a serious problem AFAIK
did you try to reflash ruu.exe or install 3.33 universal firmware again?
did they show you failed-pu again?
Click to expand...
Click to collapse
Yes, Flashing RUU still giving me the below 30% battery (I've charged all night).
And Installing Firmware 3.33 gives me fail-pu
rzr86 said:
edit: what hboot version is that?
edit 2: why did you use a tool from htc evo 3D forum?
since you are on S-OFF and supercid you could use any ruu.exe you wanted including GB's one
that would take care also of your hboot version(gingerbread ruu->hboot downgrade)
Click to expand...
Click to collapse
Idk, I saw ultimate Recovery tool, thought it would help since nothing worked..
I do have S-Off but I don't have SuperCID (my CID num is very strange only 4 digits now).
Romansko said:
Thanks for your reply,
Yes, Flashing RUU still giving me the below 30% battery (I've charged all night).
And Installing Firmware 3.33 gives me fail-pu
Idk, I saw ultimate Recovery tool, thought it would help since nothing worked..
I do have S-Off but I don't have SuperCID (my CID num is very strange only 4 digits now).
Click to expand...
Click to collapse
try to change your cid again
fastboot oem writecid 11111111
fastboot reboot bootloader
fatsboot getvar cid
Failed-PU
rzr86 said:
try to change your cid again
fastboot oem writecid 11111111
fastboot reboot bootloader
fatsboot getvar cid
Click to expand...
Click to collapse
I've tried that already but it didn't work.
./fastboot oem writecid 11111111
... INFOStart Verify: -1
INFOerase sector 65504 ~ 65535 (32)
INFOemmc_erase(1852): sd_write_sector failed!
OKAY
Romansko said:
I've tried that already but it didn't work.
./fastboot oem writecid 11111111
... INFOStart Verify: -1
INFOerase sector 65504 ~ 65535 (32)
INFOemmc_erase(1852): sd_write_sector failed!
OKAY
Click to expand...
Click to collapse
i don't know what else to suggest man
only ganeshp can help you with that
he has more experience about F-PU
the only thing i can tell you is go for jtag
rzr86 said:
i don't know what else to suggest man
only ganeshp can help you with that
he has more experience about F-PU
the only thing i can tell you is go for jtag
Click to expand...
Click to collapse
Thanks for trying! My phone doesn't boot or charge at all now. I guess JTAG it is.
Romansko said:
Thanks for trying! My phone doesn't boot or charge at all now. I guess JTAG it is.
Click to expand...
Click to collapse
give a try with unbricking project
http://forum.xda-developers.com/showthread.php?t=1522351
rzr86 said:
give a try with unbricking project
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
I did. My phone's in a QHSUSB_DLOAD mode but it doesn't get detected by the Unbricked project script. I saw other people had the same problem and Dexter advised them to JTAG.
Romansko said:
I did. My phone's in a QHSUSB_DLOAD mode but it doesn't get detected by the Unbricked project script. I saw other people had the same problem and Dexter advised them to JTAG.
Click to expand...
Click to collapse
if dexter advised it then go for it