Related
Hi to all,
I been trying to upgrade to JF 1.14 rc33 and haven't been able to get to the recovery mode to process the update.zip file. Im not a noob but also not and expert i rooted my my phone so i know basics. When i try to hold the home butoon and power button the g1 logo keeps reappearing for as long as i hold it from 10 seconds to 2 minutes. any ideas of what im doing wrong, i dont care if i have to wipe i just want rc33. Thanks.
I currently have Fimware 1.0
Build #:1.0 TC-4 RC30
Custom Theme: Windows beta 7
Just to make sure, with the phone off you press and hold the home button and then press and hold (while still holding the home button) the power button. It should take ~20 seconds for the recovery mode screen to come up.
Dharkaron said:
Just to make sure, with the phone off you press and hold the home button and then press and hold (while still holding the home button) the power button. It should take ~20 seconds for the recovery mode screen to come up.
Click to expand...
Click to collapse
i tried and did not work
natienn said:
Hi to all,
I been trying to upgrade to JF 1.14 rc33 and haven't been able to get to the recovery mode to process the update.zip file. Im not a noob but also not and expert i rooted my my phone so i know basics. When i try to hold the home butoon and power button the g1 logo keeps reappearing for as long as i hold it from 10 seconds to 2 minutes. any ideas of what im doing wrong, i dont care if i have to wipe i just want rc33. Thanks.
I currently have Fimware 1.0
Build #:1.0 TC-4 RC30
Custom Theme: Windows beta 7
Click to expand...
Click to collapse
Flash back to the original G1 theme, then try the update. Your theme may be preventing you from upgrading.
andonnguyen said:
Flash back to the original G1 theme, then try the update. Your theme may be preventing you from upgrading.
Click to expand...
Click to collapse
how do you flash to the original theme? do you know of any links? thanks
Start holding the Home button before you press the Power button.
jashsu said:
Start holding the Home button before you press the Power button.
Click to expand...
Click to collapse
i tried that in different time lentghs from 10 seconds holdin both to 2 minutes, of course pressing the home key 1 sec before the power and holding both
Same problem
Need to bump this thread as I'm having the same issue. Have a HTC Dream with CyanogenMod-5.0.7-DS, trying to go to 5.0.8, but cannot get into Recovery Mode.
Yes, I am completely powering the phone off, holding Home just prior to pressing & holding Power. I keep both depressed for a few minutes and no joy, just sits at the G1 splash screen. I can remove the battery and press Power to bring the phone up normally. Have even dropped to the console, switched to root and issued "reboot recovery". The phone restarts and sits at the G1 splash screen as well.
Can anyone offer advice on how to restore my Recovery Mode? Many thanks...
You can try to reflash (or flash another) recovery with adb, fastboot or in terminal. Btw this thread is in wrong section. It should be in Q & A section.
You could even flash a recovery image from within your rom...you said you could boot the phone normally correct?
So drop into terminal and flash it if you don't want to mess with adb.
The Amon Ra 1.7 Recovery thread has the commands you need to flash through terminal...
These people apparently are no help. If you hold down the home key and it stays at the G1, try fastboot by holding down the camera button on the side while you power it on. You only need to hold the home key until it vibrates. It should instantly boot into fast boot, if you're holding down camera when powering on.
... if you can get into fastboot, you might need to unroot your phone and reroot it.
... if you can't get into fastboot or recovery mode, then you probably bricked your G1 and you'll need a jtag or scrap it. Or if it's under insurance, tell them you updated and your phone is stuck on the G1 screen....
You could also try taking out your battery then powering it on into fastboot/recovery but odds are that wont help at all.
Hope this was some help.
yutsoku said:
These people apparently are no help. If you hold down the home key and it stays at the G1, try fastboot by holding down the camera button on the side while you power it on. You only need to hold the home key until it vibrates. It should instantly boot into fast boot, if you're holding down camera when powering on.
... if you can get into fastboot, you might need to unroot your phone and reroot it.
... if you can't get into fastboot or recovery mode, then you probably bricked your G1 and you'll need a jtag or scrap it. Or if it's under insurance, tell them you updated and your phone is stuck on the G1 screen....
You could also try taking out your battery then powering it on into fastboot/recovery but odds are that wont help at all.
Hope this was some help.
Click to expand...
Click to collapse
Why would you need to reroot it, just flash a new recovery through fastboot.
fastboot flash recovery <name>.img
misread, yeah he could do that too but it would be easier to reroot if he knows how to do that... instead of learning a whole new method.
You're right though, that would be better.
Update
I am able to fastboot by holding the camera button in and powering on. It sounds like I just need to do the Amon Ra Recovery procedure in order to restore my recovery partition. I assume that I'll need to re-root, but I'm sure there are instructions there for that as well.
Thanks for all the quick replies!
So here's what I found....
I had the exact same problem, but first a little history then how I fixed it.
I purchased an 8GB MicroSD card so I could use Apps2SD and was quite pleased with the ability to do so. Until my battery life dropped to 5mins. It was already down from when I bought it last year.
The battery was severely screwed on my. If I used ANYTHING for more than 5 mins, it would die and would NOT boot up. Oh I could pres the power button and it would try to boot but then die somewhere in the boot process. That is until I plugged it into some charger (car or wall) and then it would boot, showing anywhere from 70 to 90% battery life.
After much research I found that it was the battery and so ordered a replacement off eBay from Hong Kong. $3.96 shipped to my door. Works great, and I am incredibly thankful for that.
So just prior to getting the battery I had done an upgrade to 5.0.8 with the vain hopes that it might help limp along but to no avail. The battery was gone.
Ok, so in comes the new battery. Great! I'll just reflash the ROM to make sure there are no lingering issues and we'll be good to go! Little did I realize that I did an 'upgrade' from CM Updater and when I booted into Recovery I flashed th zip file that was there....which was 5.0.7. DOH! No biggie, everything was working so I didn't worry too much.
Then I installed Clockwork's ROM Manager 1.8.x. A few days later there was an update, so I updated to 2.0.1.3. So I updated that. It went fine.
Few days later, and a few more apps re-installed, the system was running slow.
Apps2SD was greyed out. Huh?
Checked the card....Ubuntu was only mounting it Read Only. And the old swap partition, which I thought I had deleted, was still there. Dammt. But this s a side story I think.
So I wanted to reflash but there was no way I could do it because I could not get into Recovery mode. Ugh.
ROM manager had an update to 2.0.1.4. Ok, maybe that'll work. Nope. It said it updated fine but stuck at G1 logo like many others.
Doing some googling around I saw that it was a ROM Manager issue and that you should flash back down to 1.4.x. Well, since I knew it was working at 1.8.x I decided to reflash to 2.0.0.3. I could get into recovery mode now!
While this kinda solves one issue....I'll have to go into another thread to figure out the Read Only problem so I can re-partition my card again.
Thread closed. Please post questions in the Questions and Answers forums and not in the development forum.
My phone is currently sitting with a "S/W upgrade" screen after a series of stupid events. I flashed recovery using ROM Manager before I had read that it fake flashed. I rebooted into recovery and installed CM7 nightly. Rebooted and it's stuck in a boot loop. So I finally see all the warnings against that so I figure I need to get a real recovery so I use the awesome guide from TGA_Gunnman. I follow all the instructions and it appears from the log on my PC that the CM recovery flashed successfully. I pull the cord, reinsert my battery and my phone just sits in the S/W upgrade screen. It's been like that for 30 minutes now.
What do I do?
I thought I'd done something wrong with my G2x because that happened to me too. Remove your battery and USB. Then insert your battery again. When you turn it on, make sure to hold both the power button and the volume down button until you see text that says android. If you, like me, thought you just had to hold the volume down and tap the power button (like my Nexus One), that might be your issue.
Sent from my Nexus One using Tapatalk
just disconnect usb, and go to recovery Power+vol down...
.....and congrats !
yep, I thought I bricked it too.. When you were done at the green screen where it said press any button, thats where you press whatever you want and then unplug the cord. Then, put the battery back in and hold down vol then power, don't let go until "android" pops up.. You did it man, just missing your last step..
Moved to proper forum
I can get to the Recovery screen, but I cant select any of the options....volume lets me scroll, but cant find anything to select any of the options....kinda new at this
power button to 'action' your selection... at least it works for me.
usajlh said:
My phone is currently sitting with a "S/W upgrade" screen after a series of stupid events. I flashed recovery using ROM Manager before I had read that it fake flashed. I rebooted into recovery and installed CM7 nightly. Rebooted and it's stuck in a boot loop. So I finally see all the warnings against that so I figure I need to get a real recovery so I use the awesome guide from TGA_Gunnman. I follow all the instructions and it appears from the log on my PC that the CM recovery flashed successfully. I pull the cord, reinsert my battery and my phone just sits in the S/W upgrade screen. It's been like that for 30 minutes now.
What do I do?
Click to expand...
Click to collapse
The "S/W upgrade" stays on, that's normal. See if your terminal window has completed whatever stuff it is doing. If you get a completed message, you are good to go and can safely pull out the USB chord even if your phone still says "S/W upgrade". Put back your battery and hold Power+Vol DOWN button and see if you get into cmw recovery.
so im trying to fix my friends phone and this is weird..
im able to go to cwm, wipe it all and flash a new rom.. it flashess successfully but when i reboot it goes back to the s/w update screen..it happens with any rom i flash.. its been sitting there for a while.. how long should i wait?
Once you flash the ROM you shouldn't be getting that screen...Does your friend has the G2x or 2x and which ROM did you flash?
Sounds like you screwed up the boot image. Go into APX mode again and reflash the recovery package making sure it completes, you hit a key to close the terminal window, and you hold the volume buttons the entire time. Then go into recovery and factory reset and clear the Dalvik cache. Then if you still get the S/W update screen you are going to need to go to the thread about fixing bricked phones and use the KDZ method to reflash the entire GB OTA package. There is also a new method to reinstall the entire OTA package using NVFlash but you have to hold the volume buttons down for about ten to fifteen minutes while everything flashes.
I am a SUPER NOOB... I rooted my phone and S-Off it... Was trying to flash a ROM, did not work no my phone is stuck at all white screen with HTC across it.. Please help
if you pull the battery to turn off the phone, put the battery back in and hold the volume down button while you press the power button does it take you to the bootloader? And secondly, can you get to the recovery from there?
Yes... Now the son of a gun won't even power on...
I done did something bad... It wont even power up, or charge.... Before you ask me could I get to the boot loader screen I could, but I was jacking around with all kinda of stuff now the thing won't even power up..
How long are you holding the power button to turn it on, you just need to press the power button long enough to power the device on, but keep your finger on the vol down button until you get to the bootloader. Also, do you have the updated clockwork mod recovery installed that doesn't have the charging issue. Basically, is your battery dead?
ok now i have power...
Just please help me get my phone to come on so i can use it.. I am in boot loader now(held power button and volume down button)
go to recovery
Did it... What's next? I've tried everything on the list.. Nothing, that was before I actually posted the thread...
ok, if you are in the clockwork mod recovery, from there you need to do a full wipe, "data factory reset" cant remember the exact option. after you do a full wipe then you can try to install the rom again.
"data factory reset" did.... Phone still can't get pass that same screen....
did you re-install the rom after the factory reset? Also, the rom takes a while to boot the first time.
how can I re-install a Rom if my phone cant even get pass the screen and come on for me to get to the disk drive to drag and drop the ROM?
I am new to the andriod world, so please excuse the Noob-Ness
Ok..
When you downloaded the rom did you put it on your sd card?
What rom did you flash, and how did you flash it?
Lets start there.
**Edit**
And did you even read the following thread?
http://forum.xda-developers.com/showthread.php?t=1192300
I put it on my SD card.... I tried to flash it, didn't work... I flash well attempted to flash it from the Recovery Mode(Power and Volume down) click "install from Sd card" and click the ROM, then rebooted...
My suggestion would be to use your computer to download a new rom from the dev section. Find a usb adapter for the micro SD card and move the new rom to it. Try flashing the new rom from CWM. Sounds to me like you got a rom that isn't for the sensation. Do you remember which rom you downloaded?
InsertCoin..I think it was me.. I just might have **** something up.. I follow the direction from the guy on Thelockr dot com.. it wasnt that hard. I just F my phone up...
How long are you waiting when you turn on your phone after flashing the rom? As I said before it takes a while to boot the first time.
At least 3 mins per go.
Ok so i've looked, cant find anything to help me out here... Its always possible i used the wrong search terms but i think i did pretty good...
Anyway, i had flashed i believe a CWM version of ICS when it first came out because it was easy to do, and i was able to keep root. Well I ended up with the CWM Recovery version that had the problem of constantly booting into CWM, so i fixed that and the tablet was telling me there was a firmware update, so i did it..
Now im stuck at the splash screen... When i try to boot into Recovery, it says its loading the recovery image but never does anything else. When i tried to load the other screen where you can choose recovery or the OS, i think people call it the linux screen? I dont remember, but when i did that, the big battery meter displayed on the phone for a second then disappeared... Wont turn on now, so i just plugged it in.. Is there something im missing? Or something i can do that anyone is aware of?
Check if the Android Debug Bridge works, and is your device a B60 or lower, (sbkv1)? If so you can use NvFlash to restore the tab.
Thing O Doom said:
Check if the Android Debug Bridge works, and is your device a B60 or lower, (sbkv1)? If so you can use NvFlash to restore the tab.
Click to expand...
Click to collapse
Its B90, SBKv2...
Last time i tried to boot, i tried Power+Volume Up and i saw the large battery that android phones typically show when they are powered off and you plug it in.. If i remember right, TF101 typically boots up if you plug it in when turned on, but it turned on, flashed that battery image and shut off, havent been able to turn it on since... Plugging it into my computer though, it wont turn on, plugging it into the wall outlet it turns on and sticks at the splash screen, so i'm gonna leave it there for a bit and see if it charges, then i'll try plugging it into the comp to see if ADB works... I'll let you know, thanks!
To get to recovery its power +vol down. Power + vol up gets you to apex mode, blank screen.
Sent from my Transformer TF101 using xda premium
.....don't know if I read all your info correct but to enter recovery is volume down + power until you get a message at the top of the screen then you let go both and press volume up to enter recovery or if you don't hit volume up it takes you to the cold boot / wipe data screen.
Yes, i posted that... I tried booting to recovery and it freezes when it says its loading the recovery image.
I was trying other combinations trying to remember the linux screen or whatever it was called, but either way. ADB mode doesnt work, im stuck at the splash screen.
SOLUTION: Do not do the update after fixing your TF101 if you have this same problem, because you'll have it again! Either way, here's what you do.
1) Since you cant shut off the TF101, hold the power button until the screen goes blank, then immediately let go of the power button and hold volume down. 2) The splash screen will re-appear, dont let go of the Volume Down button until you see the text at the top left corner of the screen prompting you to press volume up to enter recovery.
2) Dont press Volume Up since it will freeze trying to get into recovery. Instead, just wait and make sure your not holding down or pressing any buttons.
3) After a few second, you will be presented with two icons, one to wipe data and one to boot android/linux, selecting android/linux WILL work and boot, but you'll have the same issue as before without fixing anything if you reboot again. Follow the instructions to wipe your data. YOU WILL LOSE EVERYTHING!
4) At this point, Recovery still wont work. Boot your TF101 and get it setup and use the Play Store to download a terminal emulator
5) Open the terminal emulator and type SU and press enter, confirm superuser access.
6) Type in the following and press enter when done: echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0
7) Restart your transformer, let it boot normally the first time, after that, recovery should work.
8) Problem solved, DONT install the update this time! Install a custom ROM the typical way using CWM, and your set!
So, one thing i've noticed is im being spammed out of my mind from the OS to do that system update, so i've found that the best thing to do once your bootable, is to flash a custom ROM.
I tried this but went back to the same ICS version I had before, and ran into the same problems. Ended up with a whole other ROM, and now all problems are solved!
Good luck to anyone that has this issue!
#3
so you lost all data, all apps, all settings, all the effort and work and time to config apps and settings... UGH
I am in the same boat on my TF201 after the JB update bricked my tablet... really pisses me off as Asus says RMA it (which you know they will just wipe your data) or wipe the data yourself and hop it works. So badly want to salvage my app settings and all the work I did to trick out my tablet. F***** Asus, their own update fried my tablet.
Hey people my first post so you can call me whatever you want
Here is the thing:
I rooted the phone, installed a custom ROM and such, on the process I guess I installed this Clockwork Mod Recovery v5.8.3.1.
Well I wanted to change the ROM so I downloaded the new one (lastest trickdroid) and follow the steps, BUT!, when trying to acces the fastboot thing on that menu that can't remeber the name of, I jsut can't get into it.
When I tart the phone pressing volume down + power, instead of going to that menu it goes to clockwork mod. I was suposed to "Flash the stock boot.img from the ROM with fastboot", but well I dont know what I did or wahtever, I can't aces that menu.
What should I do?
bobyd said:
Hey people my first post so you can call me whatever you want
Here is the thing:
I rooted the phone, installed a custom ROM and such, on the process I guess I installed this Clockwork Mod Recovery v5.8.3.1.
Well I wanted to change the ROM so I downloaded the new one (lastest trickdroid) and follow the steps, BUT!, when trying to acces the fastboot thing on that menu that can't remeber the name of, I jsut can't get into it.
When I tart the phone pressing volume down + power, instead of going to that menu it goes to clockwork mod. I was suposed to "Flash the stock boot.img from the ROM with fastboot", but well I dont know what I did or wahtever, I can't aces that menu.
What should I do?
Click to expand...
Click to collapse
I am having what seems like the same issue with my phone. Just posted a thread not too long ago asking for help. One person (a SR. Member) informed me to try to restore using a NANDROID backup (which I dont have). Going off of his advice, if you have the backup, try that. If not, we both seem to have the same problem. Good luck with your issue, I will be checking both our threads for solutions from now on!
fragkiller1 said:
I am having what seems like the same issue with my phone. Just posted a thread not too long ago asking for help. One person (a SR. Member) informed me to try to restore using a NANDROID backup (which I dont have). Going off of his advice, if you have the backup, try that. If not, we both seem to have the same problem. Good luck with your issue, I will be checking both our threads for solutions from now on!
Click to expand...
Click to collapse
Well, it seems we have the same problem then, we could make a club or something.
Extra Help (Maybe)
Hey again, I found some useful information that allowed me to get into my bootloader! If you are still stuck in CWM, use the volume down button to go down to the "advanced" button at the bottom of the list. Since this is a button that leads to another list and not a direct action, you can hold down the power button when highlighted over it and turn the phone off. From there, just hold Volume Down and Power as you would normally do to boot into the bootloader. Hope this helps since it worked for me!
So:
-Navigate to "advanced" (Just highlight over it)
-Hold power button for 10-15 seconds
-Phone should power off
-Volume Down + Power to boot into Bootloader
-Profit?? (Just Kidding )
Again, hope I could be of some assistance!
fragkiller1 said:
snip!
Click to expand...
Click to collapse
well I dont know what I did. I just turned the phone off normally. Then did the power + b down, held it for about 6 seconds, relesead the power then the volume and BOM, bootlader appeared, hmmm okay I guess
Have a look at fragkiller1 thread for fixing your issue.
well now I can't even get into CWM sigh
A brief flash of a screen appears now while booting it, but it just skips to the actual OS. I have the fast boot disabled ohh man what do now? DId I mess up something?
fragkiller1 said:
Hey again, I found some useful information that allowed me to get into my bootloader! If you are still stuck in CWM, use the volume down button to go down to the "advanced" button at the bottom of the list. Since this is a button that leads to another list and not a direct action, you can hold down the power button when highlighted over it and turn the phone off. From there, just hold Volume Down and Power as you would normally do to boot into the bootloader. Hope this helps since it worked for me!
So:
-Navigate to "advanced" (Just highlight over it)
-Hold power button for 10-15 seconds
-Phone should power off
-Volume Down + Power to boot into Bootloader
-Profit?? (Just Kidding )
Again, hope I could be of some assistance!
Click to expand...
Click to collapse
I did what you told me but when highlighting advanced and pressing the power button it enters the menu advanced, then the phone just noramll reboots and the OS loads.
I would have edited the post but I can't.
bobyd said:
I did what you told me but when highlighting advanced and pressing the power button it enters the menu advanced, then the phone just noramll reboots and the OS loads.
I would have edited the post but I can't.
Click to expand...
Click to collapse
Try holding Vol- when turning it off and keep hold of it but quickly let go of power when it turns off.
Darknites said:
Try holding Vol- when turning it off and keep hold of it but quickly let go of power when it turns off.
Click to expand...
Click to collapse
thanks it worked perfectly. I thought it only worked powering off and turining it on and holding volume down.
edit: sigh now I have another problem, after using fastboot usb with the Boot_Flash_Script from trickdroid, the phone is stuck at the the screen that says"this build is for development pourpuses only..." and it won't go further
edit2: I think I falshed a ROM for VilleC2 when I have a Ville, is there a way to fix this? the phone now is stuck at loading the screen with red words
bobyd said:
thanks it worked perfectly. I thought it only worked powering off and turining it on and holding volume down.
edit: sigh now I have another problem, after using fastboot usb with the Boot_Flash_Script from trickdroid, the phone is stuck at the the screen that says"this build is for development pourpuses only..." and it won't go further
edit2: I think I falshed a ROM for VilleC2 when I have a Ville, is there a way to fix this? the phone now is stuck at loading the screen with red words
Click to expand...
Click to collapse
Ya, make sure you got the right rom and get yourself back into the bootloader and you should see recovery there then do a full wipe and flash the rom and also if you feel you might of flashed the wrong boot.img reflash it to make sure.
So it's over, all solved.
I tried to install a new ROM but CWM got me an error mounting the SD, then I installed another recovery (TWR) and installed the new ROM (viper one s) flashed the boot.img and now everthing works wonders, for now.
Thanks a lot Darknites for trying to help me I really appreaciate that
bobyd said:
So it's over, all solved.
I tried to install a new ROM but CWM got me an error mounting the SD, then I installed another recovery (TWR) and installed the new ROM (viper one s) flashed the boot.img and now everthing works wonders, for now.
Thanks a lot Darknites for trying to help me I really appreaciate that
Click to expand...
Click to collapse
Np dude glad you got it sorted but ya TWRP is way better for the sd mount and if you have 1.09 or lower Hboot it can also flash boot.img.