Okay so I tried searching everywhere for a solution and I didn't find anything.
So this is what happened, I was on ICS leak 4.0.4 ICS.672.1.13.en.03 then I tried to Fxz to AT&T 2.3.5 InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip and it got stuck at 5/20 saying "Rebooting bootloader" the screen stayed black for a long time, so I clicked close and this is where all this happened. My phone doesn't turn on, not even Fastboot, when I plug it into the charger it doesn't do anything, but when I plug it into my laptop without battery the white led turns on but still it doesn't do anything, the laptop doesn't detect anything and when I press the buttons it doesn't react nor do anything. I don't know anymore what to do, I bought this overseas so I have no warranty and it's not an AT&T phone. If anyone went through this, I really don't know what to do.. I know it's not softbrick as I can see it. I'll be very thankful if there is a solution, but my hopes are really down..
I know I read all the guides, it said "Don't pull battery or unplug. So I didn't unplug or remove battery, I just clicked close. I really didn't know this could happend. Didn't see it in any thread or post that you can't Fxz from 4.0.4 to AT&T 2.3.5, I only followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1779968
I don't want this to happen to anyone.
Wrong thread! sorry... check your PMs darkmixta!
I made the same mistake
darkmixta said:
Okay so I tried searching everywhere for a solution and I didn't find anything.
So this is what happened, I was on ICS leak 4.0.4 ICS.672.1.13.en.03 then I tried to Fxz to AT&T 2.3.5 InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip and it got stuck at 5/20 saying "Rebooting bootloader" the screen stayed black for a long time, so I clicked close and this is where all this happened. My phone doesn't turn on, not even Fastboot, when I plug it into the charger it doesn't do anything, but when I plug it into my laptop without battery the white led turns on but still it doesn't do anything, the laptop doesn't detect anything and when I press the buttons it doesn't react nor do anything. I don't know anymore what to do, I bought this overseas so I have no warranty and it's not an AT&T phone. If anyone went through this, I really don't know what to do.. I know it's not softbrick as I can see it. I'll be very thankful if there is a solution, but my hopes are really down..
I know I read all the guides, it said "Don't pull battery or unplug. So I didn't unplug or remove battery, I just clicked close. I really didn't know this could happend. Didn't see it in any thread or post that you can't Fxz from 4.0.4 to AT&T 2.3.5, I only followed the steps from this thread: http://forum.xda-developers.com/showthread.php?t=1779968
I don't want this to happen to anyone.
Click to expand...
Click to collapse
I made the same mistake, any way to repair my phone? Thanks a lot...
maqndon said:
I made the same mistake, any way to repair my phone? Thanks a lot...
Click to expand...
Click to collapse
THIS IS THE CORRECT WAY TO FXZ BACK FROM ICS:
http://forum.xda-developers.com/showthread.php?t=1805975
You are totally bricked, no way out, sorry, you need a new phone.
jimbridgman said:
THIS IS THE CORRECT WAY TO FXZ BACK FROM ICS:
http://forum.xda-developers.com/showthread.php?t=1805975
You are totally bricked, no way out, sorry, you need a new phone.
Click to expand...
Click to collapse
I was thinking about Motorola factory cable, if it would do something?
I read in some thread that it forces Motorola to go in fastboot mode http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html
What's very interesting is that the phone definitely knows that it is not in the presence of mere mortals when you use a Factory Cable. The phone knows it is in the presence of Moto gods as it boot differently than normal. Some phones like the Motorola Napoleon actually come right out and say "Factory Cable Connected". Other phones will boot straight to the bootloader for flashing. The various Droids appear to boot normally until you notice that there is no USB connected indicator at the top (once the OS is up) and that the host computer doesn't register all the usual devices. Instead the host computer only registers the bare minimum interfaces needed for RadioComm, RSD Lite, etc. to be able to talk to the phone. This in and of itself simplifies things as you don't have to monkey with setting the phone to the right mode (e.g. "PC Mode") -- it is automatically in the right mode for flashing.
Another interesting thing that is allegedly possible with the Factory Cable is that with the battery removed, it is possible to access some diagnostic pads on the main board of the phone, that when shorted (before connecting the Factory Cable) will boot the phone in a special recovery mode to help recover bricked phones. I say "allegedly" because thus far we've not had much luck with this, and our information is that it may only apply to unsecured phones anyway -- not secured consumer phones. Running around shorting things randomly inside your phone is a very bad idea unless you are willing to risk the phone, your computer, or both -- but sometimes things must die in the name of science -- but again I digress.
Click to expand...
Click to collapse
Factory Cable
I made this cable yesterday and nothing... when i connect the phone into PC the white light turn on for less than a second then turn off. The PC don't recognize the phone in Linux neither Windows.
I believe that i made the cable right but i'm not a 100% sure.
white led is also an indication battery out of power. Do try connecting wall charger for a while and see if that brings up the power.
The bootloader is what controls the phone at this level. If the bootloader is corrupted the phone is hard bricked and the only way to fix it would be to jtag flash a working bootloader.
jboxer said:
The bootloader is what controls the phone at this level. If the bootloader is corrupted the phone is hard bricked and the only way to fix it would be to jtag flash a working bootloader.
Click to expand...
Click to collapse
But how is the bootloader corrupted if it was stuck at rebooting bootloader? Motorola got a very strange flashing thing...
darkmixta said:
But how is the bootloader corrupted if it was stuck at rebooting bootloader? Motorola got a very strange flashing thing...
Click to expand...
Click to collapse
Your bootloader is not corrupted, you hard bricked because you tried to flash a bootloader that is a lower version. There is code in the BL to not allow that, that is one of a few things that will actually brick this phone.
jimbridgman said:
Your bootloader is not corrupted, you hard bricked because you tried to flash a bootloader that is a lower version. There is code in the BL to not allow that, that is one of a few things that will actually brick this phone.
Click to expand...
Click to collapse
If the phone still has the new bootloader and it is not corrupted then why are these phones hard bricked? The Android boot sequence starts with the bootloader when the power key is pressed. During the bootloader process it initilaizes the hardware using init.rc and init.<machine_name>.rc and then it looks for keys being pressed to run fastboot, recovery, etc and in the absence of that will attempt to boot up the Android system. So did RSD wipe the kernel and then when it got stuck on the flashing the downgraded bootloader (many phones don't allow this) was the kernel not reflashed yet? Or is there no init.rc and init.<machine_name>.rc for the bootloader to initiize the hardware? If the phone still has a valid bootloader, kernel and init files it should boot so that fastboot can be run. What got wiped that is preventing the phone from booting? When hard bricked phones are resurrected with a jtag flash often it is just a valid bootloader or bootloader and kernel that are flashed that allow the phone to be booted into fastboot or recovery so a valid rom can be flashed.The bootloader is also what handles charging the phone when you charge a phone that has been turned off, so if a valid bootloader and kernel are present when you plug in the charger you should see the charging sequence. Just curious what got so messed up that the bootloader is not even booting to a point where fastboot can be run and the phone doesn't respond to a charger.
jboxer said:
If the phone still has the new bootloader and it is not corrupted then why are these phones hard bricked? The Android boot sequence starts with the bootloader when the power key is pressed. During the bootloader process it initilaizes the hardware using init.rc and init.<machine_name>.rc and then it looks for keys being pressed to run fastboot, recovery, etc and in the absence of that will attempt to boot up the Android system. So did RSD wipe the kernel and then when it got stuck on the flashing the downgraded bootloader (many phones don't allow this) was the kernel not reflashed yet? Or is there no init.rc and init.<machine_name>.rc for the bootloader to initiize the hardware? If the phone still has a valid bootloader, kernel and init files it should boot so that fastboot can be run. What got wiped that is preventing the phone from booting? When hard bricked phones are resurrected with a jtag flash often it is just a valid bootloader or bootloader and kernel that are flashed that allow the phone to be booted into fastboot or recovery so a valid rom can be flashed.The bootloader is also what handles charging the phone when you charge a phone that has been turned off, so if a valid bootloader and kernel are present when you plug in the charger you should see the charging sequence. Just curious what got so messed up that the bootloader is not even booting to a point where fastboot can be run and the phone doesn't respond to a charger.
Click to expand...
Click to collapse
This is similar to what has been done here with our phone:
http://www.xda-developers.com/android/motorola-at-it-again-locks-down-atrix-4g-even-more/
It is just like the atrix 4G situation.
What Moto has done with the A0.72 bootloader is that it will not allow you to flash back to the A0.65 bootloader once the A0.72 has been flashed to the device. What it does is blows one of the 3 efuses that allows the phone to boot to the mbmloader (moto's bootloader loader).
That is why we now have a modified fxz that will flash all of the fxz minus the bootloder. So you will be on GB, but still have the latest BL A0.72.
Moto has 3 layers of the bootloader itself and all 3 are signed with the same root CA, the very last one is the one that actually loads the kernel, and the issue with these bricks is that the 2nd layer of the bootloader mbmloader that is what these people that have bricked after flashing, was the mbmloader that allowed you to "load"/flash the mbm.bin for A0.65 and that tripped the efuse that turns the 1st layer BL off, so no charging either.
Moto seems to have gotten real nasty to to us Devs as of late, and why most of us in here are saying this will be our last MOTO phone.
P.S. so far even JTAG has not been ale to resurrect some of these bricks. I was at an AT&T repair facility the other day (yes I have full access to the back area) and we played with one of the reported ICS leak bricked phones and it would not even see that the phone was connected to the JTAG box. There was another phone that was also a "hard brick" that was not from the same leak that was a GB phone and it connected right up to the JTAG box without issue.
jimbridgman said:
This is similar to what has been done here with our phone:
http://www.xda-developers.com/android/motorola-at-it-again-locks-down-atrix-4g-even-more/
It is just like the atrix 4G situation.
What Moto has done with the A0.72 bootloader is that it will not allow you to flash back to the A0.65 bootloader once the A0.72 has been flashed to the device. What it does is blows one of the 3 efuses that allows the phone to boot to the mbmloader (moto's bootloader loader).
That is why we now have a modified fxz that will flash all of the fxz minus the bootloder. So you will be on GB, but still have the latest BL A0.72.
Moto has 3 layers of the bootloader itself and all 3 are signed with the same root CA, the very last one is the one that actually loads the kernel, and the issue with these bricks is that the 2nd layer of the bootloader mbmloader that was these people that have bricked with was the mbmloader that allowed you to "load"/flash the mbm.bin for A0.65 and that tripped the efuse that turns the 1st layer BL off, so no charging either.
Moto seems to have gotten real nasty to to us Devs as of late, and why most of us in here are saying this will be our last MOTO phone.
P.S. so far even JTAG has not been ale to resurrect some of these bricks. I was at an AT&T repair facility the other day (yes I have full access to the back area) and we played with one of the reported ICS leak bricked phones and it would not even see that the phone was connected to the JTAG box. There was another phone that was also a "hard brick" that was not from the same leak that was a GB phone and it connected right up to the JTAG box without issue.
Click to expand...
Click to collapse
That's definitely a strange situation. Jtag talks directly to the cpu and the nand flash so no matter how hard the phone is bricked it should be able to be accessed via jtag. I guess the moto efuses are operating at a very low level? Kind of crappy to put that in there that renders a device unusable. People are going to run out of phones to buy. On the LG-P999 forum many people swore off LG due to lack of updates and not being able to get hardware drivers from LG or Nvidia. At least with the Nvidia chip the P999 is virtually unbrickable as recovery and bootloader can be flashed at a very low level using Nvidia tools (bootloader is not even run to flash at this level). Phones that get the most updates are Nexus branded phones but I personally will never buy a Samsung device again. They have bad hardware code in their EMMC chips and there is a rash of Nexus S devices bricking themselves during an OTA flash or factory reset when the EMMC is issued an erase command. The bad code corrupts the EMMC during the erase and renders the device bricked beyond any repair. It only happens sometimes and when it does Samsung cannot even flash them again. So I guess that just leaves HTC. Now that Google owns Motorola future Moto models may become Nexus devices. I personally prefer Moto phones but I have not hard bricked mine yet. Since I bought it second hand and am in Thailand I have been very cautious and have done very little modding to it and decided to wait (thankfully) for the official OTA release. I almost flashed the leak and glad I waited. Thanks for the explanation as to why they are perma-bricked.
This is exactly happened to my phone.
I was up on the first ICS leak, rooted and everything working great! I tried installer a font and it rebooted as normal but then stalled at the "Rethink Possible" screen. After pulling the battery and starting all over, I attempted to start the ICS process again, starting with going back to 2.3.5 (Yes, this is where I went wrong!)
The darn thing is literally a brick right now.
I wish I would have left it alone....
MACKSnare519 said:
This is exactly happened to my phone.
I was up on the first ICS leak, rooted and everything working great! I tried installer a font and it rebooted as normal but then stalled at the "Rethink Possible" screen. After pulling the battery and starting all over, I attempted to start the ICS process again, starting with going back to 2.3.5 (Yes, this is where I went wrong!)
The darn thing is literally a brick right now.
I wish I would have left it alone....
Click to expand...
Click to collapse
Yes, you hard bricked it and there is nothing you can do to fix it. There were many warning about this posted with the leak and in other threads. Sorry to hear that you killed your phone. :crying:
Technically, if you were on the FIRST leak, you should be able to fxz back.
Sent from my SAMSUNG-SGH-I727 using xda premium
Fall of Enosis said:
Technically, if you were on the FIRST leak, you should be able to fxz back.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Yea, but he would have had to read the forums and fxz back using the custom script to prevent downgrading the baseband and bricking.
Related
Hello, i recently bought a xoom (wifi only) and now im in a quite frustrating situation.
When i got it first i flashed CWM recovery and rooted it successfully, it worked all fine for a few days.
yesterday i left the xoom on charger over night and today morning it was stuck on the red M logo saying "Dual Core Technology".
well, my situation is like:
- i can restart the xoom using power + volume up, but every time it stucks on the M logo again
- i can boot into RSD with volume up while starting
- i can boot into fastboot with volume down while starting
- i can NOT boot into recovery, when i try it gets stuck at "Reading ODM fuse: 1"
i reflashed the original ROM from MOTODEV, but the device still behaves the same like before..
normal boot gets stuck at the M logo, recovery gets stuck on Reading ODM fuse: 1, just fastboot working fine (unlocking & flashing works fine)
i also searched for similar problems on the forums, but any promising solution links to filesonic links wich are not working/down
any ideas what i can do now? any help is appreciated
thanks
unlock the bootloader and flash Rogue Recovery v1.3.0
then try to enter cwm
are u on stock? or customrom? and have u tried to lock the bootloader using a customrom? cauz locking the bootloader with customrom = not good
hi, thanks for your reply.
im on stock rom and my bootloader is unlocked. i did relock the bootloader once, but only after flashing the original ROM from MOTODEV to my device, now it is unlocked again.
i first flashed the CWM 3.2.0.0 wich is available as .img via fastboot, but it does not start (Stuck on "Reading ODM Fuse: 1").
now i flashed the recovery.img inside of Rogue Recovery 1.3.0 (since i read in the corresponding thread that it works also this way), but again: Stuck on "Reading ODM Fuse: 1"
Maybe u r 2 quick? Turn on your xoom - if u see the M wait 3 sec then press vol down and then vol up
But as i said wait 3 secs - if u r 2 quick it will stuck at entering recovery
okay, so you flashed a new recovery image (did you verify the images md5-sum?) and without trying to reboot into android you cannot get into recovery? That is really odd.
If so, I suspect that something has really screwed up your internal memory. You might be able to fix it using a factory cable.
Btw: after flashing the recovery image, does the xoom say that it succeeded in writing the recovery image to its memory?
There should be a command to reboot the device to recovery? A function reboot to recovery is possible on eos 1.0 maybe theres a adb or fastboot command 4 that?
llama-power said:
okay, so you flashed a new recovery image (did you verify the images md5-sum?) and without trying to reboot into android you cannot get into recovery? That is really odd.
If so, I suspect that something has really screwed up your internal memory. You might be able to fix it using a factory cable.
Btw: after flashing the recovery image, does the xoom say that it succeeded in writing the recovery image to its memory?
Click to expand...
Click to collapse
after flashing the recovery, i can read
"Flashing StorMgr partition recovery STATUS: done!" on the xoom
the recovery image is fine, and until today i was able to boot into CWM 3.2.0.0
what is the thing with the factory cable?
about the factory cable: seems to be a modified usb-cable with two terminals on the micro-usb end being connected with each other. As far as I read, it should enable you to write to the xooms memory as long as the hardware is still okay, no matter how much you f***ed up your software I haven't had to use yet, though.
@what Unholy said: sure, adb reboot recovery will boot your xoom into recovery, but only if you have a working android running and usb-debugging enabled.
Reading ODM Fuse: 1, according to my information, means that the thing is trying to boot into recovery. Why nothing else shows up: I have no clue.
here is a thread where some us-users had a similar problem. They tried to root their xoom after getting the 4g-upgrade and ended up with the red M-Logo. After some screwing around, they even managed to wreck the fastboot-mode, thus only enabling rsd access. So no help on that side.
What especially bothers me about your problem is that it just appeared on its own. Right before your xoom showed its issues, you weren't flashing anything. Just charging shouldn't cause any of this.
I am beginning to suspect a hardware failure that can naturally be only fixed by motorola. But that's only my current opinion.
If I was you, I would try downloading the files from motorola again, check their md5-sums and then flash those using fastboot using these instructions.
If that still doesn't help, there may be a way to get a .sbf file from motorola for your xoom. That is a file which can be flashed using the windows software rsd-lite, but I haven't used that in a long time and it has been reported to not work really well with the xoom.
Next, I'd research a little on the factory cable thing, but I'd be careful with that.
As a last resort, I'd send the xoom to my dealer. Unluckily, there is a way to determine if you have had your bootloader unlocked, at least as long as fastboot is still working...
About the factory cable - with that cable u can flash your xoom if nothing else is working anymore (adb or cwm)
To build a factory cable u have to tie pin 1 (+) to pin 4 on the micro usb plug
I build one but never used it and hope i will never have to
i did download the original ROM from motodev again, checked the md5, and flashed according to the tutorial posted by llama-power, but the device still wont boot neither the rom nor into recovery.
since its now on 15% battery i think i will let it run out of power and then try to boot again...
The_Revenge said:
i did download the original ROM from motodev again, checked the md5, and flashed according to the tutorial posted by llama-power, but the device still wont boot neither the rom nor into recovery.
since its now on 15% battery i think i will let it run out of power and then try to boot again...
Click to expand...
Click to collapse
does the xoom charge when connected to ac power? I know that other devices (cellphones) wouldn't charge without working os.
However, I do not think that letting the battery run low will help you. Lithium ion batteries should not be low discharged as that will most likely destroy them and lead to a massive risk of explosion upon the next charge. Because of that, devices powered by a lithium ion battery will power down before depleting the battery, the xooms mainboard itself will most likely still be supplied with some power.
If you really want to cut the power supply to the mainboard, you'll have to open the xoom (two screws) and unplug the battery (the connector is held down by another two screws) for a couple of seconds. (here is a teardown of the xoom with pictures)
by the way, if you want to track your battery status without booting android (as that would obviously not work), you can use fastboot getvar battery-status.
well my xoom actually charges when i connect it to power, and the LED also lights up, so (thinking of what you said) it seems like the os and everything still is present, just like the bootloader cant load it or something?! is there maybe any way to update the bootloader itself?
yeah, i can also check the battery status when i'm booting with power and volume up (RSD) =)
well i'm actually thinking about disconnecting the battery, but i'm a bit unsure, i will study that now..
The_Revenge said:
well my xoom actually charges when i connect it to power, and the LED also lights up, so (thinking of what you said) it seems like the os and everything still is present, just like the bootloader cant load it or something?!
Click to expand...
Click to collapse
not neccessarily. Maybe the xoom just doesn't need any software to charge the battery.
The_Revenge said:
is there maybe any way to update the bootloader itself?
Click to expand...
Click to collapse
don't know, but since fastboot works I suspect that the bootloader itself is still fine.
The_Revenge said:
well i'm actually thinking about disconnecting the battery, but i'm a bit unsure, i will study that now..
Click to expand...
Click to collapse
have fun, but I wouldn't get my hopes up too high. I still suspect some sort of a hardware failure... Also, opening the device might leave some traces (botched screws, etc) that could lead motorola to say that you messed with your xoom if you should finally decide to send it in
well thats the same i thought about opening the device..
do you know any way to dump the partitions to the pc (maybe with fastboot?)
The_Revenge said:
do you know any way to dump the partitions to the pc (maybe with fastboot?)
Click to expand...
Click to collapse
nope, not without a working recovery.
fastboot erase partition_name should be able to clear your partitions, though. Replace partition_name with boot, system, userdata, cache or recovery
http://www.xoomforums.com/forum/xoo...ery-stuck-red-m-logo-fastboot-works-help.html
apparently that user seems to have had the same problem, he says he fixed it using 1.35 Everest Bootloader (SBF).
i also had that idea some time earlier and found a thread with the SBF files here on xda, also for the wifi model, but the only links i could find to SBF files were filesonic links wich are not working ._.
i'm now up to googling for SBF files (for the wifi only model), if i cant find anything promising i'll send it back tomorrow.
btw, erasing the partitions does not help, i've already tried that
Have u done the lte update?
UnholyX said:
Have u done the lte update?
Click to expand...
Click to collapse
he's got an wifi-only model (as stated in post #1) and is from germany (at least that's what his location and flag says). LTE upgrade is neither available in germany, nor for wifi-only-xooms. So I'd say no
@OP: that sounds quite promising. .sbf-files still seem to be available on some sites, downloading one for my xoom right now, just in case that site goes down in the future...
Yes he got the wifi version like me but something must happened ,-)
I also charge my xoom and nothing happens. He got wifi version but he maybe flashed a false update or so
There r people flashing stingray instead of the wingray version etc. - just asking what happened before - thats the reason - something must happened before ;-)
it seemed promising, but i cannot find any usable sbf file
i think i'll send the unit back tomorrow
How do I unbrick a Samsung Conquer? Model SPH-D600, FE16 stock firmware, unmodified. I was unsuccessful obtaining root with Super One Click or the root exploit for Evo 4G which purportedly works (SPH-D710.FE16_CL579416_ROOTED-oc-sfx.exe). My phone worked fine after trying these 2 methods, but the root would never take.
Next I tried the Odin method from the files upped to this thread: [ROM] Custom Stock Samsung Conquer 4G FC17 Rooted With Tweaks
I downloaded both .rar archives to extract valid files. I followed the instructions in the included text file, puting my phone in download mode, loading the 2 files in Odin, and pressing the start button (easy, right?). After letting Odin run for several minutes, it hung on step 5/8, and the Odin program closed, but my phone remained in download mode. I couldn't get my phone to respond to any keys, so my only choice was to remove the battery. Now the phone will not power on. No bootloader, no response at all. Please help!
Hey bro what's the screen look like at the moment cause I done a very similar thing and I soft bricked my phone when I used ordinary the first time because odin closed so I pulled the USB cord out and then I softball bricked it. If its a computer then,? Triangle then Android guy on your screen then you have soft bricked it and I'll be able to have lip you fix it.
And remember do not panic as that's when you really screw stuff up.
Sent from my YP-G70 on ics using xda premium
Evoium said:
Hey bro what's the screen look like at the moment cause I done a very similar thing and I soft bricked my phone when I used ordinary the first time because odin closed so I pulled the USB cord out and then I softball bricked it. If its a computer then,? Triangle then Android guy on your screen then you have soft bricked it and I'll be able to have lip you fix it.
And remember do not panic as that's when you really screw stuff up.
Click to expand...
Click to collapse
I can't get anything to show on the screen at all. No lights come on or anything.
Can you get into clockworkmod?
By holding up volume key + menu key + power key.
If yes, when you get into clockworkmod wipe data cache and do a factory reset.
Then power down or switch your mobile and then enter into download mode and use odin to flash your desired GB Rom.
Hope this solves your problem.
Once I realized it was't even responding to the charger, I knew it must be dead. I tried several button combos, and I spoke with my carrier's tech support who suggested other methods. This phone is hard-bricked with a capital B. I'm just have to deal with getting a new phone. At least the Credo people are pretty nice about discounts.
hollacoast said:
Once I realized it was't even responding to the charger, I knew it must be dead. I tried several button combos, and I spoke with my carrier's tech support who suggested other methods. This phone is hard-bricked with a capital B. I'm just have to deal with getting a new phone. At least the Credo people are pretty nice about discounts.
Click to expand...
Click to collapse
My samsung screen loads then the warning a custom os can cause critical problems in phone are. is it bricked oh no!
I'm not sure where to post this, sorry for that.
I haven't found any help or so in any threads about my phone on this forum or on others...
I own a Vodafone Smart 2 (Alcatel V860) mobile phone that I rooted, had the original ROM (got rid of the Vodafone mess ) for a while and then flashed Roeddie's v 0.9.9 (OTA 4) ROM and it was all going well...
Until a couple of days ago when I saw a thread on HtcMania.com claiming a clockworkmod recovery for this phone, so I said why not... (not allowed to post the url...)
I've put the .zip on my SDcard and flashed it via the original recovery. The cwm loaded, but at reboot it was stuck in the original recovery. Sort of Boot Loop.
Happened this before (when flashing some idiot cm7), so I wiped data/factory reset, dalvik, cache partition and I restored a previous backup, supposed to solve that Boot Loop. But, this time, it didn't... The phone was still booting directly into the original recovery.
So I tried another thing. I've started the phone in fastboot mode and used the fastboot method to write that backup. That meant "fastboot erase bootloader, boot, system, userdata, custpack, recovery, cache" and then "fastboot flash the images from the backup", method that I used before and worked without any problem.
But, this time, after I erased everything, when I started to flash the images from the backup... the phone, somehow, POWERED OFF, I still don't have the slightest idea why... :crying:
When i powered it on, the bootloader was missing so it just froze with the Android logo on the screen and after a few seconds it shut down.
I tried starting it in fastboot mode, but no luck. It starts just like that every time, but if I plug the USB cable in it, it doesn't shut down anymore, freezing with the logo on screen.
Windows won't recognize it under any circumstances, no matter what drivers I have. no adb, fastboot. So it's pretty much useless.
If i restart it like 5 times, Windows eventually recognizes it as a Modem. Useless.
I think it's a Soft Brick, because it starts but it has no idea what to do without the bootloader. It would generally be recoverable, but, as you can see, I don't have any method to communicate with this phone...
I would consider the jtag, with a RIFF Box. Taking the motherboard out of it and "writing the dead body", but I don't think the Riff Manager supports this sh**ty phone and I wouldn't like to pay for it.
The phone is still covered by warranty, but I'm not sure if they are going to do it for free, because I messed with it.
I can try that story: "I was taking an OTA Update and the phone never powered on." maybe they are going to buy it.
So is it any other method to write at least the bootloader on it, any other that the ones mentioned before, methods that I have no access to ?
RO.maniac said:
I'm not sure where to post this, sorry for that.
I haven't found any help or so in any threads about my phone on this forum or on others...
I own a Vodafone Smart 2 (Alcatel V860) mobile phone that I rooted, had the original ROM (got rid of the Vodafone mess ) for a while and then flashed Roeddie's v 0.9.9 (OTA 4) ROM and it was all going well...
Until a couple of days ago when I saw a thread on HtcMania.com claiming a clockworkmod recovery for this phone, so I said why not... (not allowed to post the url...)
I've put the .zip on my SDcard and flashed it via the original recovery. The cwm loaded, but at reboot it was stuck in the original recovery. Sort of Boot Loop.
Happened this before (when flashing some idiot cm7), so I wiped data/factory reset, dalvik, cache partition and I restored a previous backup, supposed to solve that Boot Loop. But, this time, it didn't... The phone was still booting directly into the original recovery.
So I tried another thing. I've started the phone in fastboot mode and used the fastboot method to write that backup. That meant "fastboot erase bootloader, boot, system, userdata, custpack, recovery, cache" and then "fastboot flash the images from the backup", method that I used before and worked without any problem.
But, this time, after I erased everything, when I started to flash the images from the backup... the phone, somehow, POWERED OFF, I still don't have the slightest idea why... :crying:
Logically, when i powered it on, the bootloader was missing (I've erased it earlier and the phone Powered Off just before writing the bootloader from backup) it just freoze with the Android logo on the screen and after a few seconds it shut down. Because it has no bootloader and it doesn't know how and what to boot...
I tried starting it in fastboot mode, but no luck. It starts just like that every time, but if I plug the USB cable in it, it doesn't shut down anymore, freezing with the logo on screen.
Windows won't recognize it under any circumstances, no matter what drivers I have... no adb, fastboot, odin. So it's pretty much useless...
If i restart it like 5 times, Windows eventually recognizes it as a Modem. Useless...
I have no fastboot, adb, odin (that I'm not sure if works on this phone) access... :crying:
I think it's a Soft Brick, because it starts but it has no idea what to do without the bootloader. It would generally be recoverable, but, as you can see, I don't have any method to communicate with this phone...
I would consider the jtag, with a RIFF Box. Taking the motherboard out of it and "writing the dead body", but I don't think the Riff Manager supports this sh**ty phone and I wouldn't like to pay for it...
The phone is still covered by the warranty, but I'm not sure if they are going to do it for free, because I messed with it. Basically, I can try that story: "I was doing an On The Air Update and the phone never powered on..." maybe they are going to take it... anyways...
So, I'm asking you, is it any other method to write at least the bootloader on it, any other that the ones mentioned before, methods that I have no access to ???
Click to expand...
Click to collapse
Don't know anything about your phone but all I can sare is that using flashtool, flash the stock kernel(find for your device using search box) and reinstall stock firmware or if your bootloader is unlocked, flash a different kernel with working recovery. I have xperia x10 so not even close to your phone
Bigkiler5 said:
Don't know anything about your phone but all I can sare is that using flashtool, flash the stock kernel(find for your device using search box) and reinstall stock firmware or if your bootloader is unlocked, flash a different kernel with working recovery. I have xperia x10 so not even close to your phone
Click to expand...
Click to collapse
My bootloader isn't unlocked. No one actually did that until now for this "space craft"...
I don't think that "flashtool" will be able to connect to my phone as Windows doesn't recognize it at all... And, as far as I know, flashtool is only for SONY's Xperia...
Thanks, anyway...
RO.maniac said:
My bootloader isn't unlocked. No one actually did that until now for this "space craft"...
I don't think that "flashtool" will be able to connect to my phone as Windows doesn't recognize it at all... And, as far as I know, flashtool is only for SONY's Xperia...
Thanks, anyway...
Click to expand...
Click to collapse
Like i said i have xperia x10 so i have knowledge about my device. You should ask this question in your mobile's forum. That will really help..... I think the solution they will give may be similar but in a different way.
Greets
i cant power on phone vodafone smart 2
my Vodafone won't turned on after trying to make recovery from alberto. and even did not vibrate after pressing power button to turn it on.
also it does not work at all like there are no battery attached to it. almost dead phone. and my computer not detect it anymore. and can't access fastboot or recovery screen.
do anyone fix this problem??
same problem bricked Vodafone smart ii
Yes, mine too has the same problem, pc won't see it else than Broadcom usb to com device, using a COM port and I don't know what to do as it won't start at all...
Nobody has any ideea, like on Alcatel OT908 which can be unbricked?
Many thanks
mixeristu said:
Yes, mine too has the same problem, pc won't see it else than Broadcom usb to com device, using a COM port and I don't know what to do as it won't start at all...
Nobody has any ideea, like on Alcatel OT908 which can be unbricked?
Many thanks
Click to expand...
Click to collapse
Post on your phone's forum and try to reinstall official software using pc suite(or whatever you call it)
vodacrap II bricked
Bigkiler5 said:
Post on your phone's forum and try to reinstall official software using pc suite(or whatever you call it)
Click to expand...
Click to collapse
My phone IS Vodafone Smart II that' why I did write here. Have the same problem like the others, pressing power button does nothing, phone is recognized only as Broadcom USB to Serial so I can't do anything and have no ideea what to do
mixeristu said:
My phone IS Vodafone Smart II that' why I did write here. Have the same problem like the others, pressing power button does nothing, phone is recognized only as Broadcom USB to Serial so I can't do anything and have no ideea what to do
Click to expand...
Click to collapse
It could be a hard brick and your info seems to confirm this but don't take my word for it. Search on google for issues with your device I seem to remember reply to a thread similar to this a while back.
Sent from my HTC One using Tapatalk 4 beta
**Press the thanks button if I have helped you.
---------- Post added at 09:39 PM ---------- Previous post was at 09:33 PM ----------
The I think.this is because when some phones are bricked they show the manufactures name such as on a hard bricked htc device it sometimes shows qhsusb_dload (don't quote me on that if my spelling is wrong) and it connects under a Qualcomm USB device driver. That is because sometimes on devices the chipset is made by Qualcomm but on your device the chipset is made by Broadcom and that why it shows a Broadcom named device driver.
Sent from my HTC One using Tapatalk 4 beta
**Press the thanks button if I have helped you.
Hi!
Someone has news about this topic?
bad news
cfjrocha said:
Hi!
Someone has news about this topic?
Click to expand...
Click to collapse
Yes, the bad news is that even JTAG could not repair my hard-bricked vodacrap II. My advice is to be really carefull when installing the custom android version, especially when using another sim than vodafone, some of the mods won't let you insert the network cod (eight of 1), mine didn't work with any version of the mods, sometimes I wasn't able to receive calls, sometimes to make calls, depending. Take it and keep it using vodafone or in any other case don't buy is not worthy.
i accidentally erased boot and bootloader.nor download mode nor recovery work and my pc recognize it like Broadcom USB wireless modem.Any solution?
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you try flashing factory images?
ryukiri said:
Did you try flashing factory images?
Click to expand...
Click to collapse
Yeah, that was what I flashed :/
If you can get into fastboot you "should" be able to flash stock images... Obviously this will revert any root and you will need to flash TWRP/CWM recovery after.
I assume you have a Windows PC with fastboot/adb setup and all drivers etc..
- Download latest "stock" hammerhead images (I cannot post links due to XDA rules... so: "developers.google.com/android/nexus/images#hammerhead"
- Extract the .tgz archive contents on your PC into a folder
- Boot the N5 into fastboot and plug USB cable from phone into your PC
- Go to the folder with the extracted files and run the "flash-all.bat" script on Windows
**Hopefully at this point your device will start to respond.. I.e, on fastboot screen, at the bottom you will see "writing" or something, as the script runs on the command window on your PC.**
If this works, you should be able to reboot once complete and then wait to see if you can get back into your phone.. then you can fastboot again and flash custom recovery, and then whatever rom.
If however you have a hardware issue (i.e, even after the above process it fails) then I am not sure what you could do... I guess ensure it has a complete charge. If you can get into fastboot and the buttons are responsive then it should not be a faulty power button.
Hope this helps :good:
Have you tried a simple factory reset? Reason I ask is it was working fine so sounds like something needs "flushing out" clear cache etc.
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you choose the right model and firmware before you flash in WugFresh NRT?
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
howard bamber said:
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
Click to expand...
Click to collapse
Hello! I am apologize for that I didn't read the OP carefully. This happened to me once in that particulary way, but it was immediately after flashing. OP says that it happened suddenly, without reason. So now I am the one, who doesn't read, right? Sorry for that.
Regards, Zagor
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
kyle313 said:
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
Click to expand...
Click to collapse
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
theesotericone said:
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
Click to expand...
Click to collapse
I was actually able to relock the phone.
Luckily I called google and they're going to send me a replacement.
If anyone else has any other ideas, I'll still take them...I'd rather not be without a phone for the next week!
You won't be without a phone - they are sending a refurbish unit to you , putting a block on your credit card and waiting for you phone to arive at them. Once that happens they will release the funds.
As per title, it just happened while I was using the phone while charging. Trying my luck as I'm not in the country(Australia) that I bought my Pixel from. Grateful for any suggestion that the sub can provide. Non rooted stock rom
You're only able to get into bootloader and that's all? I would suggest unlock the bootloader, a factory reset will follow. Try rebooting after that. If that doesn't work, at least your unlocked and you can fastboot boot twrp and reset that way or flash a stock rom. If nothing works you "may" have a defective device. I'm no expert but I would try those things first.
Yes only bootloader. What you have mentioned do not require recovery mode right ? Cos I can't boot into it. Thanks for your reply
k.s.deviate said:
You're only able to get into bootloader and that's all? I would suggest unlock the bootloader, a factory reset will follow. Try rebooting after that. If that doesn't work, at least your unlocked and you can fastboot boot twrp and reset that way or flash a stock rom. If nothing works you "may" have a defective device. I'm no expert but I would try those things first.
Click to expand...
Click to collapse
The bootloader would have needed to have been unlocked already.
indifferent1 said:
The bootloader would have needed to have been unlocked already.
Click to expand...
Click to collapse
no it doesnt, I suggested unlocking the bootloader first, that way it factory resets. this might fix the problem, if not its unlocked so he can flash the factory image.
Bump? I'm having this problem as well.
Same here. How would we unlock the bootloader of the phone when it's stuck in either a Google screen the reboots over and over again, or the bootloader interface (that won't load recovery)? Sorry about the noob question, but I'm not sure how to do it.
graymoment said:
Same here. How would we unlock the bootloader of the phone when it's stuck in either a Google screen the reboots over and over again, or the bootloader interface (that won't load recovery)? Sorry about the noob question, but I'm not sure how to do it.
Click to expand...
Click to collapse
I'm having the same issue. My wife's Pixel entered a continuous boot loop today. It only loads the white screen that says "Google." I can enter the bootloader, but when I select "recover," it goes back to the bootloop. As far as I know, she is on Android 8.1, debugging mode is off and the phone is 100% factory.
If anyone has solved this issue, it would be greatly appreciated!
Thanks
has anyone figured this out?? this happened to me today, i was using the phone, the poof it restarted itself and stayed in a boot loop. i can get into the recovery, i tried wipe/factory reset. any suggestions? google told me i need to send it to whatever company to get it fixed or get a new phone. verizon told me to go through insurance. insurance told me to go through verizon because i may be able to use the extended warranty. went back to verizon but they wont take it because the screen cracked a year ago. its not a deep crack and it didnt affect the phone at all, never had an issue. so now i go back to assurion and now they need an affidavit about my screen being cracked. im at a loss.... i havent rooted a phone since my droid x, then s3 days. so im essentially new again!
Same issue here. Phone starts on the bootloader (shows device is locked), but won't start recovery or boot any further.
I'm guessing it's time for a new phone? I hadn't taken the Android 10 update yet, so it was running Pie.
[edit] it's dead - won't let me unlock bootloader or switch boot slots
thedosbox said:
Same issue here. Phone starts on the bootloader (shows device is locked), but won't start recovery or boot any further.
I'm guessing it's time for a new phone? I hadn't taken the Android 10 update yet, so it was running Pie.
[edit] it's dead - won't let me unlock bootloader or switch boot slots
Click to expand...
Click to collapse
I had the same thing happen yesterday (not long after the Android 10 update). I was finally able to get it to boot after multiple tries and it stayed up long enough for me to enable "OEM unlocking" in Developer options. Now at least I have the option of unlocking the bootloader and re-flashing the OS with an image directly from Google.
Has anyone been able to get past this problem by reflashing the image? I suspect the underlying problem is some kind of hardware fault with eMMC, DDR, or the SOC itself.
One other interesting behavior I noticed is that the only way to shut it down and stop the bootloop is to select the "Power off" option in the bootloader menu. However, if I plug it in to charge when it is fully powered "off", it will start up the bootloop again.
Same sitution here. A couple of days after installaing it suddenly went inte a G-bootloop frenzy.
Erratic though, sometimes I could boot up (2-3/40 boots) but then it froze and started again.
Also Recovery and Safemode is very hard to get into.
Got in once or twice out of 100 boots, Bootloader Fastboot is generally reachable though.
It exhausted the battery and now I'm holding off trying to interfere, until I get more info off the net.