Hi, I bricked my phone somehow by either rooting my phone or upgrading it to gingerbread. Regardless the situation, I was doing it to try to remap my broken power button with my 3d button. So now, I think I bricked my phone, because everytime it gets to the logo it just stops. I flashed from my computer before, but it didn't work. It's because even if it did work, i've to go to recovery mode to wipe the data. However, my power button is not working, so there is no way i could get into recovery mode. Anyone got any idea, thank you.
Try using the LG Mobile Support Tool
kocojack said:
Hi, I bricked my phone somehow by either rooting my phone or upgrading it to gingerbread. Regardless the situation, I was doing it to try to remap my broken power button with my 3d button. So now, I think I bricked my phone, because everytime it gets to the logo it just stops. I flashed from my computer before, but it didn't work. It's because even if it did work, i've to go to recovery mode to wipe the data. However, my power button is not working, so there is no way i could get into recovery mode. Anyone got any idea, thank you.
Click to expand...
Click to collapse
Write down the IMEI and Serial Number of the phone then start the program, go to Customer Support (the second menu option from the left - I have it in Italian so I'm going blind here) then choose Emergency & Recovery Mode (the last option). You'll be asked for IMEI or Serial Number. Type them it and be patient. Just be sure that your phone is charged above the 40% and that you don't run the LG PC Studio.
i'm not sure if it works:
install adb(google it)
pöug in usb to phone and pc
when the lg logo apears type in cmd:
adb reboot-recovery (or reboot recovery)
if this doesnt work
press at the lg logo vol up + 3d button
and type in cmd
adb reboot
---------- Post added at 02:04 PM ---------- Previous post was at 01:56 PM ----------
i'm not sure if it works:
install adb(google it)
pöug in usb to phone and pc
when the lg logo apears type in cmd:
adb reboot-recovery
if this doesnt work
press at the lg logo vol up + 3d button
and type in cmd
adb reboot
Related
Hi,
I have an Samsung Nexus S [not rooted] with a broken power button (stopped working after I updated to ICS). So for a couple of months, I was using the "pull batter" trick to power on and off my phone.
Now I am stuck in a bootloop and I can't seem to get out of it, despite howmany time i try to pull out the battery.
I manage to enter into the fastoboot mode screen, but then my volume buttons won't work and I can't scroll up and down the menu.
Is there a way out? I am really a noob at this and haven't rooted an android phone before. Please help!
Thanks
i think the best think is to unlock the bootloader and doing that it will prompt to you asking for erasing all your phone (sdcard included), maybe this hard factory reset will help you bcz like that ur phone will be back to stock ics.
to unlock your bootloader (wich is the first step to root, if u want to) do this:
download this (the entire nexusrootics folder): https://docs.google.com/open?id=0B7O2O1p4iWXTWWxha0pUcXNud2s
put the folder on the root of your hard drive of your pc (for example mine is C:\)
then install the drivers (wich are in the downloaded folder), so plug your phone go to driver management and choose to select the fiolder and select the usb_driver and choose ADB... (first one)
then click windows button+ R and type "cmd" (no "")
now type "cd.." (no "") to go back to the root of your hard drive and type cd (name of the downloaded folder)
now type "adb devices"; if a number appears it means that your drivers are well installed
after that, type "fastboot oem unlock"
on your nexus a question will appear to ask your if your are sure to erase all your content, use the volume lockers to say yes. (if your volume buttons dont work here i think u are stuck)
NOW YOUR PHONE SHOULD BE BACK TO STOCK, WITH THE BOOTLAODER UNLOCK BUT NOT ROOTED so it's safe for warranty issues
please click the thanks button
---------- Post added at 07:26 PM ---------- Previous post was at 07:05 PM ----------
if you want i can make a video and send to you
respond to me by mail: [email protected]
to lock it back just type "fastboot oem lock"
I got the same problem, yesterday the power button was not functioning properly. And after a couple of battery pulls, I can't start the phone unless I put a usb cable in. The phone starts but it is stuck in bootscreen. If I hold volume up button and connect usb cable + put the battery back in I can get into bootloader (Rooted and unlocked) but I can't navigate in boot screen with volume up or down, and pressing power button does nothing, which btw is clicking when pressed as usual.
I think the powerbutton is continuously pressed, and thats why I can't navigate or execute any commands in bootloader.
Any help to this problem would be appriciated, since I'm working abroad and using this phone as gps here and have no backup phone at the moment.
Zerox1000 said:
I got the same problem, yesterday the power button was not functioning properly. And after a couple of battery pulls, I can't start the phone unless I put a usb cable in. The phone starts but it is stuck in bootscreen. If I hold volume up button and connect usb cable + put the battery back in I can get into bootloader (Rooted and unlocked) but I can't navigate in boot screen with volume up or down, and pressing power button does nothing, which btw is clicking when pressed as usual.
I think the powerbutton is continuously pressed, and thats why I can't navigate or execute any commands in bootloader.
Any help to this problem would be appriciated, since I'm working abroad and using this phone as gps here and have no backup phone at the moment.
Click to expand...
Click to collapse
I got the exact same problem.
Can't backup even through clockwork Rom Manager mod, because when in recovery the power button might be interfering with the scripted backup....
Well mine has weird issues
Every so often if I click the power button it doesn't do Anything or brings up shutdown menu
Sent from my Nexus S 4G using xda premium
I'm in the exact same boat. What the hell did Samsung make the power button with??? Mine died on me barely 6 months after purchase of the phone. It's pretty pathetic.
I would like to know how am I able to browse bootloader screen if my power button is dead??
Mine did the exact same thing, I was online chat with Samsung for warranty and all of a sudden the volume buttons started working in fast boot...and amazingly I pressed power after select recovery and it works...right before the volume buttons "unlocked " , I was kinda tapping on the power button trying to get it to do anything, then I saw the USB init and whatnot
Sent from my Nexus S 4G using Tapatalk 2
Hi everybody,
my Nexus S power button is no longer working, it's unresponsive, when i turn the phone off removing the battery, and then put the battery back in, the phone turns on itself after a few seconds.
I tried to see if it was a software problem resetting the phone using a jig to go in download mode, flashing with odin and installing a gingerbread stock firmware, but the problem is still the same.
I would give it to the assistance center (the phone is still in warranty) but the bootloader is unlocked.
I can't lock back the bootloader, when i go to bootloader (using the command "adb reboot bootloader" since the button is not working) the bootloader loads but remains frozen, i can't move in menu using volume buttons and if i try with the command "fastboot devices" i just get the "waiting for devices" message.
Can you help me please?
I was having a problem with my computer recognizing my device. When I was in bootloader fastboot would not work, but found out that adb did when it shouldn't. It allowed me to reflash bootloader and then fastboot worked again. Also if your using win7/8 need the newest drivers there is actually two one for when the phone is in USB debugging to use ADB and another driver for bootloader to use fastboot, that could be another problem.
I have uninstalled all drivers, reinstalled the one for the adb interface loading the os normally and it works fine, but when i reboot in bootloader mode the device isn't recognized at all neither like unknown device in device manager so i can't reinstall the drivers and apparently can't have any kind of communication
Is there any way to lock the bootloader without using the fastboot command?
Just send it to samsung. I had the similar problem 2 weeks ago and they were able to fix the power button in less than 2 hours without touching the software.
Yeah i think i'll do that... Do you think they'll still acknowledge the warranty if they see that the bootloader is unlocked?
SpiLunGo said:
Yeah i think i'll do that... Do you think they'll still acknowledge the warranty if they see that the bootloader is unlocked?
Click to expand...
Click to collapse
In my area samsung acknowledges as long as you have the official receipt, a warranty card, and the 1-yr warranty seal is still in-tact.
i too had the same problem. like others say it is the problem caused by power button stuck. But if you want to install stock rom or to get into fast boot mode try this.....!!
First, Remove your phone's battery to turn off your device,then re-insert your battery. According to your problem'the phone will automatically turn on. When the google logo appears, press the volume key down continuously till phone boots and show the desktop. The phone will enter to safe mode. Now try your power button. It would work....!!!!
Thanks.
---------- Post added at 07:54 PM ---------- Previous post was at 07:38 PM ----------
hello..
I had the same problem of frozen fast boot and power button. But when I get my phone to safe mode, the phone starts responding.Why is that..please help me out....
Update: I messed around with fastboot a bit more and managed to brick it entirely. It's stuck in a boot loop now -- it won't even power off -- and there's nothing I can do about it, so I just took it in to get it replaced.
Hey guys, I know this thread is very similar to others that have been posted, but I've already looked through them and haven't found anything that works for me yet.
My phone was already running rooted stock with TWRP for the recovery. I tried flashing CM10.2 but it was for the wrong model (I downloaded D802 but my phone is of course D801. Oops). Upon reboot, the LG splash screen appeared and then immediately went to a black screen saying
Code:
Fastboot mode started
udc_start()
When I attempt to turn the phone off it just reboots to that screen again. I am still able to use fastboot, and have tried wiping the phone and re-flashing TWRP. It doesn't throw any errors but I still can't actually boot into recovery. I can't use fastboot to flash a new ROM onto the phone though, since it doesn't like .zip archives apparently, and I can't find a .img file of a ROM anywhere.
When I try to use flashtool as described here http://forum.xda-developers.com/showthread.php?t=2541087 it says the device is not connected (probably because it's not in download mode?).
Any help would be much appreciated. All I need to do is get into recovery, it shouldn't be this hard.
That's the same error I got a few days ago when I mis-flashed a new recovery (oops. and be careful when you use 'dd', because a typo can nuke your recovery). I'd get that error message if I tried to boot into recovery, but if I just let the phone boot, it would boot fine. It was easy to fix, but that was because I just used Terminal Emulator to re-flash recovery.
Your best bet might be to go back to stock. Try this thread.
similar issue, but not quite
antinorm said:
That's the same error I got a few days ago when I mis-flashed a new recovery (oops. and be careful when you use 'dd', because a typo can nuke your recovery). I'd get that error message if I tried to boot into recovery, but if I just let the phone boot, it would boot fine. It was easy to fix, but that was because I just used Terminal Emulator to re-flash recovery.
Your best bet might be to go back to stock. Try this thread.
Click to expand...
Click to collapse
I'm not in a boot loop, as I can power off and it will stay off. But I am stuck at the Fastboot mode started screen (I can't get download mode to come up). When I do try to get into download mode it flashes for a second, but then goes back to the fastboot mode screen.
I'm hoping to find an image that I can use the fastboot flash recovery command with to re-write my recovery partition.
Any suggestions on where to find this image file? Or am I going down the wrong path?
Thanks,
Joseph
Did you get it to work? I am in the same mode.
I'm stuck here as well. Looking for a fix
Did you guys find a fix? I need help with this...
similar thing here with me
any solution
i cant boot at all, not into download mode, nor recovery,
got this too because i was installing a note3 rom to my d800, acciodentally of coarse. i managed to boot to twrp by doing the power and volume down technique. and from twrp i restored my recent backup
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
TheBestEver said:
All I did was hold power and volume down until the LG logo came on (not when it flashed for just a split 2nd) and then pressed and held power down again and it came to the white screen. Then I pressed power 3 times and got into recovery
Click to expand...
Click to collapse
Which recovery? TWRP?
Swizzle82 said:
Which recovery? TWRP?
Click to expand...
Click to collapse
Cool I wonder if that combo could be used to get into stock kk recovery?
---------- Post added at 09:14 PM ---------- Previous post was at 09:04 PM ----------
Just tried. Nope
lthnnpwr said:
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
Click to expand...
Click to collapse
What if I'm stuck on a black screen no matter what buttons I press.
Unable to do that.
lthnnpwr said:
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
Click to expand...
Click to collapse
I'm trying to do that, but when I begin to hold the buttons my screen only three silver vertical bars appear on the left side of the screen.
FluffyZ said:
I'm trying to do that, but when I begin to hold the buttons my screen only three silver vertical bars appear on the left side of the screen.
Click to expand...
Click to collapse
does not work for me any other solution????
stuck in fastboot mode
i did the factory hard reset but it returns to fastboot mode
any help?
FluffyZ said:
I'm trying to do that, but when I begin to hold the buttons my screen only three silver vertical bars appear on the left side of the screen.
Click to expand...
Click to collapse
berceniqgil said:
does not work for me any other solution????
Click to expand...
Click to collapse
hssn a said:
i did the factory hard reset but it returns to fastboot mode
any help?
Click to expand...
Click to collapse
Not sure if you've tried this. To power off fully, press and hold the volume down and power buttons. Do not let go of the buttons. The phone should turn off and the LG logo should appear. Continue holding until after the LG logo disappears. The phone should be fully off and won't turn back on at this point. If you don't see the LG logo, just keep the buttons pressed for about 10-15 seconds and you should be fully powered off by then. You should be able to enter download mode from here (press and hold volume up button while plugging in USB from computer). If you are able to enter download mode, then use the LG mobile support tool in my thread and follow the instructions. This should flash the latest stock system to your phone. If that doesn't work, I have a link to an alternate method for flashing the latest stock system on your phone. Hope this helps.
Howie Dub said:
Not sure if you've tried this. To power off fully, press and hold the volume down and power buttons. Do not let go of the buttons. The phone should turn off and the LG logo should appear. Continue holding until after the LG logo disappears. The phone should be fully off and won't turn back on at this point. If you don't see the LG logo, just keep the buttons pressed for about 10-15 seconds and you should be fully powered off by then. You should be able to enter download mode from here (press and hold volume up button while plugging in USB from computer). If you are able to enter download mode, then use the LG mobile support tool in my thread and follow the instructions. This should flash the latest stock system to your phone. If that doesn't work, I have a link to an alternate method for flashing the latest stock system on your phone. Hope this helps.
Click to expand...
Click to collapse
Thanks for ur idea , but the point is that everything lead me to fastboot even when I'm trying (volume up + usb ) it also lead me to fastboot i have im every buttons and others until i finally found this thread :http://forum.xda-developers.com/showthread.php?t=2477595 . it's a simple way to eliminate the fastboot that u can go to download mode
---------- Post added at 03:53 AM ---------- Previous post was at 03:23 AM ----------
Hey guys, for people who are stuck in fastboot mode there you go a simple way to get back into download mode : http://forum.xda-developers.com/showthread.php?t=2477595
then u have to flash a kdz file via flashtool after connecting into download mode
Those two threads tell you what to do
Jb : http://forum.xda-developers.com/showthread.php?t=2432476
Kk :http://forum.xda-developers.com/showthread.php?t=2664028
lthnnpwr said:
To anyone still stuck in this situation (reboot loop, no recovery etc):
- Unplug the phone from the USB cable
- Hold down the power until the phone turns off
- Wait a couple of minutes with the phone off
- Now hold power and volume down buttons
- When LG logo appears - release power and volume down and hold them again
- When you see a white screen with "reset to default instructions" -- do what it says, meaning pressing the power button a couple of times
THAT should work.
Click to expand...
Click to collapse
I hve tried this but after i confirm the reset it staight away takes me to the black screen
When I try to boot the phone, either through the power button or bootloader, it tries to get into recovery over and over again but can never get in (to TWRP recovery). It always just gets to the TWRP splash screen but then goes black and repeats. The bootloader is unlocked. I am not sure what state the actual OS is in. ADB doesn't recognise the phone (adb devices shows nothing). Oh, and I can't get into recovery through bootloader either.
Can anyone offer any advice?
Thanks in advance
Possible power button issue? ADB commands do not work in fastboot mode. Is the phone detected in fastboot mode? Did you try re-flashing TWRP?
audit13 said:
Possible power button issue? ADB commands do not work in fastboot mode. Is the phone detected in fastboot mode? Did you try re-flashing TWRP?
Click to expand...
Click to collapse
Definately not a power button issue, it was fine before. What is fastboot mode and how would I get into it?
The power button issue can appear out of nowhere, at least it did for me. The constant reboots are also an indication.
To get into fastboot, power off the phone, hold volume up, volume down, and press power button.
I had the adb issue once .. Connect the phone to your PC then go to device manager and select your phone .. Click on update drivers and click browse your PC instead of the internet if I am correct you will see two driver options . select the USB component driver and install it .. Should work now ...
---------- Post added at 04:06 PM ---------- Previous post was at 03:30 PM ----------
Corneliusvinyo said:
I had the adb issue once .. Connect the phone to your PC then go to device manager and select your phone .. Click on update drivers and click browse your PC instead of the internet if I am correct you will see two driver options . select the USB component driver and install it .. Should work now ...
Click to expand...
Click to collapse
Disregard this . I assumed you could get it into recovery . sorry
i tried like this:
1. First of all turn off the device by holding the Power button.
2. Afterwards hold down the Volume Up and Volume Down button for a couple of seconds.
3. While holding these buttons press the Power button for a short while.
4. Release held keys when you see an Andoid image.
5. Then press the Camera button to enter Recovery Mode.
and noting. there is no android image.
and also when i press and hold power+ volume up the phone turn on and then after 2-3 sec the phone vibrate 3 time.
what is that 3 vibrations?
so how do i enter the recovery???
thanks!
UP
Shlomi93 said:
UP
Click to expand...
Click to collapse
Power down your device.
Press and hold POWER + VOLUME DOWN
After the Sony logo disappears, release the POWER button and continue to hold VOLUME DOWN for 3 seconds.
This will allow you to boot to recovery.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Power down your device.
Press and hold POWER + VOLUME DOWN
After the Sony logo disappears, release the POWER button and continue to hold VOLUME DOWN for 3 seconds.
This will allow you to boot to recovery.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
there is no logo. if i press and hold volume up + power i feel one vibration and the after 2 sec i feel 3 more vibrations and it keep going like that in a loop.
and there is no logo. the screen doesnt even turns on.
Shlomi93 said:
there is no logo. if i press and hold volume up + power i feel one vibration and the after 2 sec i feel 3 more vibrations and it keep going like that in a loop.
and there is no logo. the screen doesnt even turns on.
Click to expand...
Click to collapse
I may have given you incorrect steps and that's my fault. I was reading about a different device. My bad. Try this:
Power off your device.
Press and hold VOLUME UP + POWER at the same time.
Release all buttons when the Sony Xperia C3 screen flickers and in a few seconds the Recovery screen will appear.
You can also try this:
Reboot your phone, as it's rebooting, press volume down + power. You should then see the Android robot after restart, release buttons and press camera shutter.?
---------- Post added at 11:37 PM ---------- Previous post was at 11:26 PM ----------
Okay, quick question. Have you installed a custom recovery? If not, your device was not shipped with a stock recovery in and therefore you will not be able to boot into recovery.
fast69mopar said:
I may have given you incorrect steps and that's my fault. I was reading about a different device. My bad. Try this:
Power off your device.
Press and hold VOLUME UP + POWER at the same time.
Release all buttons when the Sony Xperia C3 screen flickers and in a few seconds the Recovery screen will appear.
You can also try this:
Reboot your phone, as it's rebooting, press volume down + power. You should then see the Android robot after restart, release buttons and press camera shutter.?
---------- Post added at 11:37 PM ---------- Previous post was at 11:26 PM ----------
Okay, quick question. Have you installed a custom recovery? If not, your device was not shipped with a stock recovery in and therefore you will not be able to boot into recovery.
Click to expand...
Click to collapse
well, no. i didnt flashed a custom recovery since i cant.
the only thing i can do is access to fastboot and i get an error while trying to send commands through SDK
fastboot failed remote unknown command
i searched in google but i havent found any solution.
any idea?
Shlomi93 said:
well, no. i didnt flashed a custom recovery since i cant.
the only thing i can do is access to fastboot and i get an error while trying to send commands through SDK
fastboot failed remote unknown command
i searched in google but i havent found any solution.
any idea?
Click to expand...
Click to collapse
Lemme take a look at my Sony stuff and see if I can find a solution.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Lemme take a look at my Sony stuff and see if I can find a solution.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
ok i will wait for your replay! thanks a lot man.
Shlomi93 said:
ok i will wait for your replay! thanks a lot man.
Click to expand...
Click to collapse
Try using this guide to install recovery
http://forum.xda-developers.com/sony-xperia-c/help/comprehensive-guide-rooting-flashing-c3-t3277939
Shlomi93 said:
ok i will wait for your replay! thanks a lot man.
Click to expand...
Click to collapse
Do something for me first... Let's make sure your ADB fastboot is working properly.
If your device will boot normally, navigate to DEVELOPER OPTIONS and make sure you have enabled USB DEBUGGING.
Next, open a COMMAND PROMPT window and type:
adb devices
If the adb daemon is not running, you will see the COMMAND PROMPT say that it is starting the daemon on a certain port number.
Type this again:
adb devices
Your COMMAND PROMPT should return with a list of attached devices with your serial number.
Next, type this:
adb reboot bootloader
If it's working properly you should be booted into the bootloader and your LED should be a solid blue.
If you want to boot to the bootloader with the hard keys then do this:
Power off your device
Connect the USB cable to your PC
Press and hold POWER UP and plug in the USB cable to your device while still holding POWER UP.
This should boot you into the bootloader with a solid blue LED.
Let me know if these steps are working and post back with what you find
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Do something for me first... Let's make sure your ADB fastboot is working properly.
If your device will boot normally, navigate to DEVELOPER OPTIONS and make sure you have enabled USB DEBUGGING.
Next, open a COMMAND PROMPT window and type:
adb devices
If the adb daemon is not running, you will see the COMMAND PROMPT say that it is starting the daemon on a certain port number.
Type this again:
adb devices
Your COMMAND PROMPT should return with a list of attached devices with your serial number.
Next, type this:
adb reboot bootloader
If it's working properly you should be booted into the bootloader and your LED should be a solid blue.
If you want to boot to the bootloader with the hard keys then do this:
Power off your device
Connect the USB cable to your PC
Press and hold POWER UP and plug in the USB cable to your device while still holding POWER UP.
This should boot you into the bootloader with a solid blue LED.
Let me know if these steps are working and post back with what you find
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
yes this works. i mean the volume up and usb cable let me go into bootloader. i see blue led and device is on debuging mode but i am unable to get into the device since i forgot the pass code.
this is why i want to get into recovery. i want to wipe data so the pass code will be removed.
beacuse of the pass code i cannot send adb commands through the lock screen.
anyway, there is somthing i can do to wipe data or flash a new rom or remove passcode through bootloader? (the black screen with the blue led)
fast69mopar said:
Do something for me first... Let's make sure your ADB fastboot i..............................................
XDA-Developers mobile app
Click to expand...
Click to collapse
my friend, thank you for your help but i found a solution.
The Solution
1. find a ftf file (firmware for sony device) i used this ------------->>>> https://docs.google.com/uc?id=0B1AAC4lt7nzOM0plZW56MHZXYkE&export=download
2. download FlashTool (by Androxyed) from the official site --->>>> http://www.flashtool.net/index.php
3. flash the phone like this guy here --------------------------------->>>> https://www.youtube.com/watch?v=vlyVdz1CIbY
and boom. no password. you can choose if to wipe data or not.
btw:
still didnt found a way to get into recovery
Shlomi93 said:
my friend, thank you for your help but i found a solution.
The Solution
1. find a ftf file (firmware for sony device) i used this ------------->>>> https://docs.google.com/uc?id=0B1AAC4lt7nzOM0plZW56MHZXYkE&export=download
2. download FlashTool (by Androxyed) from the official site --->>>> http://www.flashtool.net/index.php
3. flash the phone like this guy here --------------------------------->>>>
and boom. no password. you can choose if to wipe data or not.
btw:
still didnt found a way to get into recovery
Click to expand...
Click to collapse
I was actually putting together a post for you with the exact same solution. I read over the details a little while ago. Glad you got it working. Good job.