I installed razodroid 4 few months ago on my fit, and I didnt want razodroid anymore. I firstly wanted prada rom, and i downloaded him, done what instruction say's, but he wont boot up, then i got back to razodroid, and after few days I tryed to put miui, but he wont let me eather. He stuck on black screen with android on it, and when i get razodroid back he boot up in few minutes, and there are two animations. Can you please help me to put miui rom on my fit.
Remove sim card and try
Sent from my GT-S5670 using xda premium
I removed sim, went to cwm, installed janas miui, wiped chache and data particion, hited reboot, and now i'm waiting on black screen with android letters. I'll tell you did anything happend in 10 minutes
Nothing happend... There is still black screen with word android on screen... What can I try now??
Format system, then repeat install procedure...
please give me instructions how to format system.
Q) How to install custom roms?
A) Before proceeding, you will need to have any custom recovery installed, since the stock Samsung recovery cannot be used here. Preferably, use CWM5 by tj_style (the one explained above). Also, remember that your phone’s data (not the one stored on sd-card) will be erased/reset, so be sure to make a backup.
1.Now, download the custom rom of your choice from the Development Section of our sub-forum.
2.Optional: Check if the zip file you have downloaded is proper (i.e. not corrupt).
To do this, simply use WinZip (Windows) or other similar program to extract the file on your desktop. If the extraction has completed without any errors, then the file is proper, but if you get any errors while extracting, then the file is corrupt and you will have to re-download it.
3.Now, copy the file onto your sd-card.
4.Reboot into recovery mode.
5.Select “wipe data / reset”.
6.After this completes, select “wipe cache partition”.
7.After this, select “advanced”>”wipe dalvik cache”.
8.Now that you have wiped all data, select “install zip from sd” from the main recovery menu, then “choose zip from sdcard”.
9.Optional, but recommended: Select “mounts and storage”>”format /system”.
(Important, if you are installing any variation of CyanogenMod 7 (cm7) for the first time, or are moving from a stock based custom rom to a cm based custom rom...else you will be stuck on the "android" text screen)
10.Now select the custom rom that you had placed on your card, and wait for it to install.
11.Optional: When the install completes, wipe data, cache and dalvik cache again (steps 5,6,7)
12.Select “reboot system now”, and be prepared to wait till the phone restarts. (Note: first boot may take upto 10 minutes, so do not panic)
13.Enjoy your new rom!!!
Click to expand...
Click to collapse
thread link (guide) present in my sig...
didn't help... stuck again... ( what's left??
which CWM version are you using?
flash the latest one then goto>mount and storage
>format data-yes
then >format system -yes
and >format cache -yes
then follow normal procedure to install a rom.. after completion remove battery and boot up.
also check the zip file size properly whether it matches exactly or not..
i'm using v5.0.2.7.
i'll try it now.
i quit... it stuck again... (
List out the steps (properly) that you do...
Not all the roms should get stuck...
all roms get stuck, but razodroid 4... (
tell what u did exactly ..
Um Have you tried a STOCK ROM? That Might Fix it And then just Go into another Custom ROM
it's better to flash stock firmware once again
Edward Cullen
hrco1908 said:
I installed razodroid 4 few months ago on my fit, and I didnt want razodroid anymore. I firstly wanted prada rom, and i downloaded him, done what instruction say's, but he wont boot up, then i got back to razodroid, and after few days I tryed to put miui, but he wont let me eather. He stuck on black screen with android on it, and when i get razodroid back he boot up in few minutes, and there are two animations. Can you please help me to put miui rom on my fit.
Click to expand...
Click to collapse
Try doing
Wipe Data/Cache from the CWM
flash the stock rom . and whats the baseband of the rom which you are trying to install?
hrco1908 said:
I installed razodroid 4 few months ago on my fit, and I didnt want razodroid anymore. I firstly wanted prada rom, and i downloaded him, done what instruction say's, but he wont boot up, then i got back to razodroid, and after few days I tryed to put miui, but he wont let me eather. He stuck on black screen with android on it, and when i get razodroid back he boot up in few minutes, and there are two animations. Can you please help me to put miui rom on my fit.
Click to expand...
Click to collapse
Em... Try Clear Cache and Wipe Data, Wipe Dalhvik(?) Cache. Use.cMW.
Sent from my GT-S5670 using xda app-developers app
Just wipe data/factory reset.
Than wait for at least 5 minutes
Related
I have clockworkmod recovery installed and rooted. It's been a few months since I rooted, and can't remember exactly what I did, but OTA updates stopped working. Hence, I am still on gingerbread.
Trying to flash a custom rom now, CM9. I tried the rom manager method several times, found out that wasn't recommended, and then tried the recovery method.
The same thing happens either way: it boots into CM9, but the boot animation keeps playing.
With the rom manager method, I tried wiping nothing, then tried wiping dalvik only, then tried... whatever the other option was, wipe cache and data?
With CMW recovery I downloaded CM9 zip and the appropriate GAPPS, moved onto the internal SD card, booted into recovery mode Wipe data/factory reset, then Wipe cache partition, then install both.
I'm able to restore from backup each time, but this is annoying.
Thank you
1. Install ICS Radio (UCLF6)
2. Wipe Data/Factory Reset
3. Format /System
4. Install CM9.zip
5. Install Gapps.zip
6. Wipe Cache/Dalvik
7. Reboot
:good:
UZ7 said:
1. Install ICS Radio (UCLF6)
2. Wipe Data/Factory Reset
3. Format /System
4. Install CM9.zip
5. Install Gapps.zip
6. Wipe Cache/Dalvik
7. Reboot
:good:
Click to expand...
Click to collapse
So "UCLF6" appears to be rom that is similar to stock, I'm guessing the idea here is that I'm resetting the phone but retaining root, the idea being that something on my phone is messed up and preventing CM9 from booting but doesn't prevent the current rom from booting?
Two other questions
1. Won't format/system wipe out all my backups in addition to my data?
2. Have you had or seen this problem before? I'm hesitant to commit myself to something, especially with no backups, if it's just a theoretical fix. I do appreciate it either way.
UCLF6 is an ICS modem/radio you need if you're coming from gb.
If you back up though CWM you can restore again later if you want.
Formatting /system will delete the operating system.
Formatting /data will delete your apps/settings/wallpaper etc...
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I had a similar boot animation loop when I went from stock GB to stock ICS. What seemed to fix it was updating my CWM from 5.0.2.6 (non-touch) to 5.5.0.4 (touch). (BTW, I couldn't find an advantage of stock ICS over stock GB. I have since put on CM9 which I'm liking).
UZ7 said:
UCLF6 is an ICS modem/radio you need if you're coming from gb.
If you back up though CWM you can restore again later if you want.
Formatting /system will delete the operating system.
Formatting /data will delete your apps/settings/wallpaper etc...
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Still got the boot loop.
When I did the "Wipe data/factory reset" I did get an error message during one of the processes"
"Error mounting sdcard/.android_secure!
Skipping format"
I had a boot loop problem when I first tried to flash JB. I went from GB to ICS with a custom rom a few months back, but I couldn't get any of the new JB roms to work. I ended up having to upgrade my CWM to the touch version in order to get JB flash to work. Also, a tip-- the boot animation will take a minute or two even when it is working. Don't assume it is still a problem if you see it more than once.
can anybody tell me how to flash remics rom from starting?
Custom ROM installation
karanmirchandani96 said:
can anybody tell me how to flash remics rom from starting?
Click to expand...
Click to collapse
Check on the steps mentioned by Chinmay in the development section - they are pretty straight forward, else just google up!
http://forum.xda-developers.com/showthread.php?t=1844062
-First you need to root your cell by flashing cf-root for your firmware
http://forum.xda-developers.com/showthread.php?t=1331253
-then download the latest RemICS ROM and put in the roots of memory card
-put your phone in recovery mode by pressing the "volume down + HOME + power"
-once cell goes in recovery mode Do a factory reset/data wipe
-then select “install zip from sd card” > “choose zip from sd card” and then choose RemICS ROM
-after flashing this rom "wipe cache,wipe dalvik cache (by going in advance)" from recovery
-then select reboot system now
I see you are a newbie, i'll help you.
You first need to flash XXKPE, from XXKPE you need to flash DDLF2, and when DDLF2 is flashed, you need to flash CF-ROOT for DDLF2.
Let the phone boot and go to CWM icon, press it and wait till it loads, press Reboot to CWM recovery (something like that) and when it is rebooted wipe data factory reset, wipe cache, wipe dalvik cache and install the Remics Rom and reboot and thats it.
If u want to flash ADDONS just reboot recovery and flash ADDONS no need to wipe anything.
Good luck.
where is external sd card folder in remics rom?
Ditbardh said:
I see you are a newbie, i'll help you.
You first need to flash XXKPE, from XXKPE you need to flash DDLF2, and when DDLF2 is flashed, you need to flash CF-ROOT for DDLF2.
Let the phone boot and go to CWM icon, press it and wait till it loads, press Reboot to CWM recovery (something like that) and when it is rebooted wipe data factory reset, wipe cache, wipe dalvik cache and install the Remics Rom and reboot and thats it.
If u want to flash ADDONS just reboot recovery and flash ADDONS no need to wipe anything.
Good luck.
Click to expand...
Click to collapse
I've seen and tried to follow the steps in your post in the dev forums, but I lack the XXKPE step! Lol. I have RemICS 1.7 now on DXKP7, but I'm experiencing problems with battery drain, so I want to switch to DDLF2. I'll just outline the steps that you have already mentioned so I can be sure:
1. Flash XXKPE, download from here (post by kkrraazzyy).
2. Flash DDLF2 (don't know how to,but you can download from the same link in step 1)
3. Flash CF-ROOT ([please insert forum link here for download and instructions])
4. Let the phone boot
5. Reboot to recovery
6. Perform factory reset
7. Wipe cache and Dalvic cache
8. Install RemICS ROM
Sorry, noob here. Many thanks!
display
my display is draining 44% battery please suggest me some display settings
To all noobs above, all your questions are already answered millions of times, do a simple search and you will find the answers.
Hello !
I have this phone since yesterday and I have a problem.
I want to install X-Gamerz v2.6 Rom. I have done the KPE clean part, but after I flash CF Root LF2, I don't know what to do. I have reboot the phone in recovery with volume up+home+power button, I wipe data and I selected the .zip (CM10 A4) from SDCARD to flash. It starting to flash and after 3 seconds , it start to reboot. After another 3-4 seconds it says something which look like trying to flash something in recovery, but it stop very fast and it reboots again. After 3-4 seconds it says same thing, and reboots again and again . I tried to take out the sdcard, but after reboot , the recovery says something like "Waiting to mount the SDcard (20sec)" . After 20 sec it reboots again and says same thing.
I tried to follow the steps again, but I`ve got same thing. I tried to use the phone after I flashing CF Root LF2 and it work. But if I trying to flash again CM10 A4 zip or X-Gamerz zip, it enter in bootloop again.
What I doing wrong?
RazvanFCBM said:
Hello !
I have this phone since yesterday and I have a problem.
I want to install X-Gamerz v2.6 Rom. I have done the KPE clean part, but after I flash CF Root LF2, I don't know what to do. I have reboot the phone in recovery with volume up+home+power button, I wipe data and I selected the .zip (CM10 A4) from SDCARD to flash. It starting to flash and after 3 seconds , it start to reboot. After another 3-4 seconds it says something which look like trying to flash something in recovery, but it stop very fast and it reboots again. After 3-4 seconds it says same thing, and reboots again and again . I tried to take out the sdcard, but after reboot , the recovery says something like "Waiting to mount the SDcard (20sec)" . After 20 sec it reboots again and says same thing.
I tried to follow the steps again, but I`ve got same thing. I tried to use the phone after I flashing CF Root LF2 and it work. But if I trying to flash again CM10 A4 zip or X-Gamerz zip, it enter in bootloop again.
What I doing wrong?
Click to expand...
Click to collapse
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Thank you. It worked
RazvanFCBM said:
Thank you. It worked
Click to expand...
Click to collapse
np
mustafahussain said:
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Click to expand...
Click to collapse
Want to install x-gamerz. Currently on XXKPQ Stock. Can i get detailed instructions to install. Just a noob. Dont know anything about kpe lf2 etc. Flashed XXKPQ with i think odin some time ago though.
Sent from my GT-I9003 using xda app-developers app
RazvanFCBM said:
Thank you. It worked
Click to expand...
Click to collapse
i have the same problem how u got it worked can u explain?
mustafahussain said:
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Click to expand...
Click to collapse
I have I9003 stuck on boot rebooting after i tried to flash the root
now I am not able to make it work tried to flash firmware same result ,when I enter the cwm it is not doing the factory reset or wipe data
would you help?
ahmadtrabulsi said:
I have I9003 stuck on boot rebooting after i tried to flash the root
now I am not able to make it work tried to flash firmware same result ,when I enter the cwm it is not doing the factory reset or wipe data
would you help?
Click to expand...
Click to collapse
thank you solved
if someone need the method just let me know
i have cwm recovery. i follow each steps carefully but every time i stuck in htc logo. is it a problem with the recovery??i dont know how to install twrp over cwm tried many but no result. Can anybody help me please.
bro go to recovery>>flash original 2.3 ROM>>after succesful flashing>>again go to recovery>>follow the instructions given in the thread for flashing custom roms
im also new to android........but this reflashing method works well....
ok do it as follow.
remove your battery sd card and sim card. hold the power button for like 10 sec. then insert every thing back on it
Re partition your memory card and make sure u do it from inside CMW recovery.dont forget to backup stuff on it. make an ext-4 ext partition. min 1024mb.
after that go to mounts and format cache, data, system, sd-ext. dont format sdcard. leave everythhing unmounted
then go to advance and format dalvic cache and battery stats.
then factory reset/factory wipe on the main menu. and then flash the rom. wait for like 20 mins or so. it should work.
if it doesnt then unroot ur phone. install factory rom using RUU and then root it again.
Fastboot TWRP or PhilZ recovery into your phone. Explorer doesn't have the ability to flash recoveries as zips.
TWRP: http://forum.xda-developers.com/showthread.php?t=2123503
PhilZ: http://forum.xda-developers.com/showthread.php?t=2265055
Also, never do a RUU. Unless you know what a RUU does to your device and how to handle soft bricks(clearly you don't).
sneakerspark said:
ok do it as follow.
remove your battery sd card and sim card. hold the power button for like 10 sec. then insert every thing back on it
Re partition your memory card and make sure u do it from inside CMW recovery.dont forget to backup stuff on it. make an ext-4 ext partition. min 1024mb.
after that go to mounts and format cache, data, system, sd-ext. dont format sdcard. leave everythhing unmounted
then go to advance and format dalvic cache and battery stats.
then factory reset/factory wipe on the main menu. and then flash the rom. wait for like 20 mins or so. it should work.
if it doesnt then unroot ur phone. install factory rom using RUU and then root it again.
Click to expand...
Click to collapse
don't try this i bricked my phone doin this
vishaal14 said:
don't try this i bricked my phone doin this
Click to expand...
Click to collapse
May I specifically ask what really bricked your phone?
Smfh are you sure you wiped the dalvic cache the cache and did a factory reset before flashing this rom? And if you have an internatiinal version and your falshing a carrier branded rom it wont work it will brick and go to your boot loader and post the information s-on or off your cid all of it to get to the boot loader simply power down the phone hold power and vol down until it boots into the boot loded and simply tell us what it says it will help out a lot
Sent from my HTC One X+ using xda premium
download PhilZ Touch Recovery v5.08.5 | CWM Advanced Edition 6.0.3.3 and use Recovery Flasher Utility to flash recvory.then try it will never stuck on book logo,previously i was facing same problem with every sense 4 rom, now after flashing new recovery ,able to install any rom made for explorer,currently enjoying Triumph HD V1-Phoenix By: adityalahiri13
There is a sense 4.0A port from HTC one V by cute prince.. Odexed. Posted by Arslan.. search for that and flash.. Smoother ever even on class 4.. first boot in just about 2 minutes.. you can also go for port from same device by Shekutanwar..
His new build is Odexed too and
Should be smooth... Not checked myself though..
Sent from my HTC Explorer A310e using Tapatalk 2
vishaal14 said:
don't try this i bricked my phone doin this
Click to expand...
Click to collapse
I have a solution..
Just flash the sense4 :good: in your HTC Explorer with minimum 1gb sd-ext,
Reboot the phone and when it stuck on htc logo just press and hold volume down key until the phone starts..
it will start within 4 to5 minutes in safe mode, then again restart phone and enjoy ......!!!!!
I still say we need to know his boot loader status because if he dosnt have s-off he has to flash the kernel (boot.img) sepreatly through adb and fast boot if he dosnt have s-off it wont work without the kernel
Sent from my HTC One X+ using XDA Premium 4 mobile app
Create sd-ext partition again
2 days ago i was just going around my advanced junk with clean master app. there was a filed named empty folders which was 11 mb in advanced junk section, so i cleared the file and went to play angry birds, then suddenly it stuck and rebooted. :'( now every time it boots up, shows the boot image, starts the cyanogenmod boot animation and then the boot animation stucks and then the whole process again...REBOOT LOOP
i tried every thing till now:
1. tried to install stock rom through odin but still shows cyanogenmod animation and reboot loops
2.tried to install different recovery but the recovery doesn't change also.
3. tried to install a different rom for eg: PAC rom. it installs but it still shows cyanogenmod
4. also now i tried to install stock firmware with pit file but it still shows cyanogenmod animation.
AND MY WARRANTY WAS EXPIRED MONTHS AGO
i think there is a problem with the partition or something... i dont know how to fix it
SOMEONE PLZ HELP ME!
Have you tried downloading the stock Samsung Firmware and flash it thru Odin don't use pit file unless you're partiitions Are messed up
Sent from my HUAWEI Y300-0100 using xda app-developers app
tried everything
jack54782 said:
Have you tried downloading the stock Samsung Firmware and flash it thru Odin don't use pit file unless you're partiitions Are messed up
Sent from my HUAWEI Y300-0100 using xda app-developers app
Click to expand...
Click to collapse
I have tried everything:
1. flashing the stock firmware with odin but still cyanogenmod animation loads and restart loops
2. flashing the stockfirmware with PIT file but still reboot loop with cyanogenmod animation.
fahad5596 said:
I have tried everything:
1. flashing the stock firmware with odin but still cyanogenmod animation loads and restart loops
2. flashing the stockfirmware with PIT file but still reboot loop with cyanogenmod animation.
Click to expand...
Click to collapse
If you are able to boot to recovery, can't you wipe completely? (System, cache, data) Once CM is gone you should be able to install other Rom. I'm a little confused how CM could continue to boot if it has been wiped from phone...
Sent from my GT-p511x
wiped many times
sharonbw said:
If you are able to boot to recovery, can't you wipe completely? (System, cache, data) Once CM is gone you should be able to install other Rom. I'm a little confused how CM could continue to boot if it has been wiped from phone...
Sent from my GT-p511x
Click to expand...
Click to collapse
i wiped everything except sdcard in mount section even the dalvic cache but still cm boot animation appears :/
i think i cleared a system file which was related to the partition of the system in the advanced junk section of clean master app...
I HATE CLEAN MASTER
You can flash a Custom-Recovery using Odin.
You´ll find a link latest recoverys in my signature.
If Stock Recovery still boots you need to uncheck "Auto-Reboot" in Odin. When Odin finished flashing, wait 1 minute to be sure. Then directly boot into recovery from download-mode and enjoy the custom recovery.
This will increase your flashcounter!
Put your Rom & Gapps on your MicroSD Card
In CWM / CWM based recoverys:
Wipe Cache
Wipe Dalvic Cache
Wipe Data Factory Reset
format /system
fromat /data and /data/media (this will format your internal sd! be sure your rom placed on microSD card)
flash the rom
reboot (first boot can take ~30 minutes - if it still bootloops: something´s worng )
if everything working:
reboot recovery
flash gapps
reboot
Strange that reflashing the system didn't help. You could try it with an other recovery?