One last question! then I'am a pro kinda lol - Samsung Galaxy S (4G Model)

Alright I'll start off with my phone stats and what I've done and then ask the question. Build Gingerbread, model SGH-T959V , Frimware 2.3.6, kernel 2.6.35.7-antsvx v1.1.3
You will notice that I'am using AntonX kernel which was a cake walk to install thanks to you guys.
Now I've noticed on one of the rom tutorials its says ''Must have pre-installed kernel with clockwork recovery!''
Does AntonX have a clockwork recovery built in? or does this mean that I can now use clockworkmod? everywhere I've readed its says to avoid clockworkmod like the plague.
I've readed about booting into recovery so I know how to do that just wasn't sure about the clockwork thing.
Thanks for your help!

Hi Tunderpimp
Clockworkmod = recovery
AntonX kernel has it.
To get to CWM/recovery - power off your phone, keep pressing both volume buttons (+ & -) while pressing power button. When splash appears, leave the power button but keep holding the volume buttons until you see a text menu.
For further info please read the wiki.
Sent from my SGH-T959V using xda premium

Related

[Q] Can't get into CWM recovery after installing MIUI 1.9.23

This post belongs to http://forum.xda-developers.com/showthread.php?t=1278053 but since I don't have enough posts to reply there, here's my issue.
On my Infuse 4G I had Serendipity VII, then flashed over MIUI 1.9.23 which I downloaded from the abovementioned thread. Backed up rom, wiped data and cache, rebooted all good. But when it comes to enter into recovery to flash the MIUI zip again (as per the instructions at the thread above), my phone is stuck at the "Samsung" logo.
Tried battery pull, various hardware button combos, no luck so far. What is the correct hardware button combination to get into CWM from boot? I thought it was volume up + power on, but that didn't work. Tried volume up + home button + power on, no luck either.
So as of now... I'm with a dead Infuse.
Any help would really be appreciated
Thanks!
- Adriano
Same here, I can't even get into the blue CWM recovery. If I don't hold any buttons the phone will go into MIUI like normal but I want to get into recovery to backup and restore.
for me it's even worse... my phone is stuck at the Samsung logo.
Turn off your phone, press and hold down volume up, volume down, and the power button. When you hold them you'll see the Samsung logo, keep holding them. The screen will go black and in like five seconds a SECOND TIME the Samsung logo will appear, you can then let go of the buttons and you should be on cwm
Sent from my SGH-I997 using XDA Premium App
I've tried going into Rom Manager and re-flashing recovery for the "Galaxy S i9000" and it says it's successful but I still can't get into recovery.
So I do have a working MIUI phone but now I seem to be stuck on this ROM
florelui001p said:
Turn off your phone, press and hold down volume up, volume down, and the power button. When you hold them you'll see the Samsung logo, keep holding them. The screen will go black and in like five seconds a SECOND TIME the Samsung logo will appear, you can then let go of the buttons and you should be on cwm
Sent from my SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
thank you so much! followed your instructions and now I'm in CWM... reflashing...
Kernodle said:
I've tried going into Rom Manager and re-flashing recovery for the "Galaxy S i9000" and it says it's successful but I still can't get into recovery.
So I do have a working MIUI phone but now I seem to be stuck on this ROM
Click to expand...
Click to collapse
ROM Manager's recovery is worthless...
Use the instructions given above for the three-finger-salute in order to enter kernel recovery.
Entering recovery from boot can be tricky sometimes.
Sounds like Mikey somehow broke the "reboot recovery" command.
Entropy512 said:
ROM Manager's recovery is worthless...
Use the instructions given above for the three-finger-salute in order to enter kernel recovery.
Entering recovery from boot can be tricky sometimes.
Sounds like Mikey somehow broke the "reboot recovery" command.
Click to expand...
Click to collapse
Yeah I've 3 fingered about 10 times now, pulled battery, tried rebooting into recovery from MIUI power menu and from RM menu, made sure to wait for the second SAMSUNG to appear, etc but still have not been able to get into CWM recovery. The logo just stays up forever.
Dang I don't really want to Odin back to stock anyone have thoughts as to how I can get this fixed?
Took me awhile to figure it out, I'm on Miui too and recovery works just fine.
This is what you should be doing:
1. Hold all the buttons down. (Volume Up + Down + Power)
2. When you see the Samsung logo, let go of the power and keep holding both volume buttons until you get into CWM.
himynamesnoah said:
Took me awhile to figure it out, I'm on Miui too and recovery works just fine.
This is what you should be doing:
1. Hold all the buttons down. (Volume Up + Down + Power)
2. When you see the Samsung logo, let go of the power and keep holding both volume buttons until you get into CWM.
Click to expand...
Click to collapse
Yup. Same works for any CWM-enabled kernel back in Samsung-firmware-land.
Ok well I got this fixed ghetto style.
I used SGS kernel flasher to put the Bedwa gingerbread kernel, then after reboot the female robot voice said there was not enough space in the partition.
However, at this point I was [finally] able to 3 finger my way into CWM - the red one, not the blue that MIUI was showing, and from there I could reinstall Infused from the SD card. Still no idea why the MIUI kernel would not let me into recovery!
ok figured to let you guys know how did it go for me after I was able to boot into CWM (thanks again florelui001p for the tip btw) -- was able to flash MIUI and after the reboot things went fine.
Played a bit around with MIUI (first time I was trying an MIUI rom), didn't quite like the complete reskinning of the plain vanilla android UI (don't get me wrong, the quality and amount of the work that must be behind MIUI is impressive, it's just me that I prefer things more "barebone" style).
So after my brief experience with MIUI, I tried to restore a couple of CWM rom backups I took earlier today -- and CWM was unable to restore either one... sweet. So I went for flashing the latest Infused (as of now) 2.3.3 -- and no surprise there. A great rom for the Infuse. So far with the Infuse aside from the stock rom, I've been on Infused, Serendipity VII and MIUI. Still hoping/waiting for CM7... used to love it on my old Nexus One.
- Adriano
adri72 said:
ok figured to let you guys know how did it go for me after I was able to boot into CWM (thanks again florelui001p for the tip btw) -- was able to flash MIUI and after the reboot things went fine.
Played a bit around with MIUI (first time I was trying an MIUI rom), didn't quite like the complete reskinning of the plain vanilla android UI (don't get me wrong, the quality and amount of the work that must be behind MIUI is impressive, it's just me that I prefer things more "barebone" style).
So after my brief experience with MIUI, I tried to restore a couple of CWM rom backups I took earlier today -- and CWM was unable to restore either one... sweet. So I went for flashing the latest Infused (as of now) 2.3.3 -- and no surprise there. A great rom for the Infuse. So far with the Infuse aside from the stock rom, I've been on Infused, Serendipity VII and MIUI. Still hoping/waiting for CM7... used to love it on my old Nexus One.
- Adriano
Click to expand...
Click to collapse
No problem! Glad to see you got everything up and running
Sent from my SGH-I997 using XDA Premium App
i've tried all the things u said but no success. then i've tried to enter download mode and after going to recovery with vol up + home + phone worked
Three finger does still work in MIUI/CM7, but it seems REALLY finicky for some reason.
Entropy512 said:
Three finger does still work in MIUI/CM7, but it seems REALLY finicky for some reason.
Click to expand...
Click to collapse
I've never had a problem. Here's a trick I use to get into recovery "100% of the time, every time":
Make sure your phone is unplugged from any charger/USB. Remove, and replace your battery. Place your phone on it's side, volume buttons down, on a desk/table. Press down until you feel the volume buttons depressed, and keep holding the phone with pressure. Press and hold the power until you see the Samsung logo, keeping your phone mashed against the table. When you see CWM, you can release the pressure on your phone, reconnect to cables, do whatever.
After flashing 1.9.30, I cannot access clockwork recovery from ANY method, 3 finger salute won't work, trying from MIUI won't work, reflashing clockwork from ROM manager won't work.
What am I suppose to do?
Have you tried the steps below?
florelui001p said:
Turn off your phone, press and hold down volume up, volume down, and the power button. When you hold them you'll see the Samsung logo, keep holding them. The screen will go black and in like five seconds a SECOND TIME the Samsung logo will appear, you can then let go of the buttons and you should be on cwm
Click to expand...
Click to collapse
The caveat is to wait for the second time the Samsung logo appears, and then release all buttons.
- Adriano
this worked for me.
LG_iiNsTiiNcT said:
Okay so if you were one of the few people who lost recovery for some weird reason "ME" no need to unbrick to stock and re-flash I have a solution.
1: Download sgs kernel flasher
2: Download CWM community kernel
3: Flash kernel via sgs kernel flasher "unchecked the reboot button" when done flashing turn phone of "SHUTDOWN"
4: 3 finger until the Samsung logo pops up keep holding the buttons the screen will go black then Samsung logo will come up, let go of the power button and keep hold the volume up and down buttons "For about 20 seconds" then let go it should boot into Red CWM after a few seconds.
5: Go to install zip from SD card go all the way down and run update.zip it will boot back into RED CWM run update.zip again and it should now boot into GREEN CWM
6: From here Re-Flash MIUI "New Release would be smart", Wipe Fact,Wipe Cache, Wipe Dalvik, Flash, reboot at sign of Samsung logo pull battery, 3 finger into blue recovery and flash again.
7: Presto you should be set and have recovery back.
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
I posted a fix in the main MIUI thread. Also copied above!
Sent from my SGH-I997 using xda premium

Broken power button!..Help!

Hello..
Any idea I can use volume button as power button??
My power button now broken..
I already tried anyunlock and fix power button broken but It cant solve my problems..maybe not compatible with ICS I think...
I want to flash CM9 but I cant root my phone without using power button...
anyone???
Try to open the cm9.zip with rom manager
Sent from my Nexus S using xda premium
devgee said:
Try to open the cm9.zip with rom manager
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Then??after that???
The rom pre installation dialog will come up and ask you for various options like wipe dalvik cache
And then just click OK
But I can't guarantee you that this will work!!
How did you broke your power button
Sent from my Full Android on Crespo using xda premium
I know of a method to remap your Power key to one of the volume keys, and one of the volume keys to the Search key. However, this remapping only sticks when the phone is booted into ICS. AFAIK the remapping won't help you once you're in the bootloader and trying to access recovery. It also requires root, which you said you don't have...
If you're still interested in this, PM me, and I'll edit this post with the aforementioned method.
devgee said:
The rom pre installation dialog will come up and ask you for various options like wipe dalvik cache
And then just click OK
But I can't guarantee you that this will work!!
How did you broke your power button
Sent from my Full Android on Crespo using xda premium
Click to expand...
Click to collapse
Huh??I dont know....woke up from sleep...I cant use anymore..so sad..nexus s super fast phone
mine just crapped out too! what rom/kernel were you using? I recently installed pixie's and glados. The weird thing is that I can turn on the phone using the power button, but once on the power button does nothing.
vroomr4 said:
mine just crapped out too! what rom/kernel were you using? I recently installed pixie's and glados. The weird thing is that I can turn on the phone using the power button, but once on the power button does nothing.
Click to expand...
Click to collapse
all just stock....
use all wake apps from market to wake your phone using volume button..
to turn off your phone use screen off from market..
my problems right now how can I root my phone with broken power button??
al_madd said:
all just stock....
use all wake apps from market to wake your phone using volume button..
to turn off your phone use screen off from market..
my problems right now how can I root my phone with broken power button??
Click to expand...
Click to collapse
seems like my button just died completely. I was using stock for a while and the power button was acting up. Then I rooted and went with pixie, and this solved the power button issue. Then just yesterday it acted up again and today it was really erratic. and now it's pretty much dead. if you google "nexus s power button" you will see many people affected by this in the past few days.
i have the same problem, my power button is broken also cant bring it to the repair centre because i imported my phone. But as long as you already have clockwork recovery working properly, you can do pretty much anything: installing custom roms etc etc, in normal usage i use the app "fix broken power button" and that works flawleslly even on ICS.
and if you havent got clockwork recovery, i think there was a way to install it via adb fastboot, not sure how though....
Any idea how to root without power button??
Anyone willing to help me??
I can help
I too have a broken power button, and for me fastboot does not even work!
I have found a solution a made a script that all you need to do is launch with your PC! (credits to saurik for the exploit)
Hope this will help you
All you need to do, is run the script! Then, plug-in your phone (needs to be on with USD ADB DEBUG ON) and done!
You can download it here: http://www.mediafire.com/?qhefhtgs20fdtsd
This will root your phone, and then you can afterwards flash ClockworkMod from the market and then reboot into recovery =)
A work of advice though, make sure to install CyanogenMod7 which has an option to unlock with volume button!
Peace be with you

[Q] Who has Bricked their Note 10.1 besides me?

Mine is stuck on the Downloading screen, shows it has progressed all the way. No button pressing combination will change anything. .Not good at all. Used Odin to flash the the same CWM recovery everybody else is using. Looks bad here. I have rooted countless Android devices and this is my first fail. Can somebody give me any advice? I just wrecked my wife's birthday gift...
Hold down the power button to restart it.
No dice. Tried that.
Sent from my SAMSUNG-SGH-I727 using xda premium
If power button for 15 seconds doesn't work, try volume up (in landscape right side of volume button) + power button for 10 seconds.
Held power button down for two minutes and it woke up. Redownloaded custom recovery and flashed with Odin third time. Still get stock Android recovery. Done trying. Thanks for helping though.
Sent from my SAMSUNG-SGH-I727 using xda premium
turbo23 said:
Held power button down for two minutes and it woke up. Redownloaded custom recovery and flashed with Odin third time. Still get stock Android recovery. Done trying. Thanks for helping though.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thats not bricked then
Right. I have a fine G1 that is bricked.
Sent from my SAMSUNG-SGH-I727 using xda premium
I guess the word Bricked was a poor word choice... Sorry bout that. I'm leaving it alone. Thanks for the info though, seriously.
Sent from my SAMSUNG-SGH-I727 using xda premium
turbo23 said:
Held power button down for two minutes and it woke up. Redownloaded custom recovery and flashed with Odin third time. Still get stock Android recovery. Done trying. Thanks for helping though.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
if you are still getting the stock recovery 3e follow these steps :
1. When flashing CWM through odin untick the "Auto Reboot" option within Odin.
2. Flash CWM.
3. When done , press power & volume up ( the one apart from power button ) until the Samsung logo appears, then leave both buttons.
4. CWM will appear.
5. Choose "Reboot System now "
6. You will get a new screen with an option mentioning something like " disable bla bla bla " ( can`t remember the exact words ) , press it & reboot.
7. Now if you get back to pressing power & volume up you will have a permanent CWM.
Then you can install root through CWM.
Please do not open multiple threads with the same topic you already have one with the same topic in Q&A Mod will close this one.

[Q] bootloop, cm9, cannot access cwm

hey guys, how are you doing?
i'ld like to ask some questions.
my phone bootloop, it only show cm9 boot screen. i can't access cwm by holding home + volume + power button.
so? how can i fix it?
What do you mean by "can't acczss cwm" is it fastboot?? If not, maybe you're pressing wrong buttons!
Sent from my LG-P500 using xda premium

[q] cwm wont work

banging my head against the wall here , wasted 2 days reflashing phone
I followed all the guides and searched high and low for a solution to get CWM on my tmobile blaze 4g
I have stock GB , 2.3.6 on my phone
was able to root and have superuser installed
anytime i flash CWM via odin , it says successful and when I try to take out the batt , hold vol up/down and power , i still get the default stock recovery over and over and over again .... about to throw this phone in the garbage
I flashed it the same way it says in instructions , place the cwm file in the pda section , make sure partition isn't selected then hit start
FYI
no i dont have kies running in background , or any other program that would interefere with pc odin
I would seriously appreciate any help
PS. am I trying to get to CWM the wrong way , or ist he default to getting to CWM is holding power/ volume up and down , then inserting battery while usb is connected
sonkameja said:
PS. am I trying to get to CWM the wrong way , or ist he default to getting to CWM is holding power/ volume up and down , then inserting battery while usb is connected
Click to expand...
Click to collapse
That's how to get into download mode...
CWM is having the battery in already and power + vol - + vol + and releasing when the Samsung logo appears
Sent from my BN NookHD+ using xda app-developers app
anactoraaron said:
That's how to get into download mode...
CWM is having the battery in already and power + vol - + vol + and releasing when the Samsung logo appears
Sent from my BN NookHD+ using xda app-developers app
Click to expand...
Click to collapse
wow so simple lol
i should have asked earlier
THANK YOU SO MUCH !!!!!!!!
Coming from a GT-N7000 is way different to how we go to cwm than you guys

Categories

Resources