Installing OTA 1.84 after custom recovery - HTC One S

Hey all,
I just finished installing the OTA update for my provider. I've seen lots of people advising to "flash stock recovery", but I wanted to go into depth a bit in case some one out there needed a hand like I could have used a few days ago.
(1) Grab the stock RUU for your phone and version from this thread by football. It's a 500mb download - you only really need ~8mb of this, but here you are. Thanks to everyone who is sharing their files! You can find your current version on Settings->About->Software Information->Software number. If you're on Fido (Canada), you want the Rogers version...since Rogers owns Fido.
(2) Follow the instructions from this guide on the Sensation Development board. I used claudenegm's (b) instructions with no difficulty.
(3) That guide suggests booting into the stock recovery and flashing the update. I tried to do this but with no luck, so I just booted into the system and had it update itself. After the update was done, I reflashed TWRP (the newest!) and root with Hasoon's toolkit and I'm good to go again.
Hope this helps someone.

Do you know where the jb ruu is for fido? Thanks
Sent from my GT-N7105 using XDA Premium 4 mobile app

BrownDog99 said:
Do you know where the jb ruu is for fido? Thanks
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
try here
http://www.androidruu.com/?developer=Ville

Thanks bro, it's there. I couldn't fix it way back when. I see the fix was in April 2013. Now back to learning how to fix a bricked one s. I did this to my girlfriend way back in January 2013, got a new phone, now that one is cracked , so she asked about this one. I knew that the Jellybean ruu would be available by now lol
Sent from my GT-N7105 using XDA Premium 4 mobile app

Thanks for This Learn

Related

New build/baseband number for the VZW S3

I had my S3 replaced today becuase the power/lock button broke. When the vzw rep. brought out my replacement device it had a sticker on the phone that said updated. After activating and checking the building number I can confirm that VZW is updating their stock to a newer version. My current build number is I535VRALG1 and baseband is I535VRLG1. Does any one know if I can flash the previous version in Odin. I am afraid that they might have done this to block our current root method. This is the first I have heard about this current build.
Wanna help us out on IRC?
We need to see if you can root and what your system dump looks like.
any idea on what the update is?
I am heading to school right now and I do not get out until 11 o'clock eastern time. When I get home tonight I'll join the irc if somebody can be kind enough to let me know what channel it is.
Edit:
I see the channels in LLstarks sig I will join in tonight when I get back from school
Sent from my SCH-I535 using xda app-developers app
Anymore info on this? I just had a phone shipped out on Monday, received today. Same little UPDATED sticker on the phone and box.
It would be nice to get some new radios. Would they be flashable with a locked bootlader?
Sent from my SCH-I535 using xda app-developers app
ajd88 said:
It would be nice to get some new radios. Would they be flashable with a locked bootlader?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Nope. Having a locked bootloader means we can't flash radios, kernels, or change boot animations ONLY roms.
Sent from my SCH-I535 using xda app-developers app
maybe his has the new software with the unlocked bootloader.... LOL
chakra said:
maybe his has the new software with the unlocked bootloader.... LOL
Click to expand...
Click to collapse
LOL can u imagine? haha
Hopefully its rootable with updates to fix any issues.
Anyone gotten this OTA yet?
Sent from my SCH-I535 using xda app-developers app
How would we update this then? Stock recovery? Shouldn't make a difference if we've overwritten the recovery.img, since the only thing that seems checked is that the boot.img is signed.
Sent from my SCH-I535 using Tapatalk 2
Get a better signal with the new baseband? Or more consistant?
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Nope. Having a locked bootloader means we can't flash radios, kernels, or change boot animations ONLY roms.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You're probably right about the baseband but people have already flashed kernels and boot ani's.
SlimSnoopOS said:
Nope. Having a locked bootloader means we can't flash radios, kernels, or change boot animations ONLY roms.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Radios are unknown at the moment (most likely can flash update no problem, not sure about flashing downgrade). However boot animations ARE part of the rom, just FYI. Also kernels are flashable as well, just has to be done through a workaround method.
It probably takes away the search the whole phone function of S-Voice and some other small updates.
Sent from my SCH-I535 using xda app-developers app
open1your1eyes0 said:
Radios are unknown at the moment (most likely can flash update no problem, not sure about flashing downgrade). However boot animations ARE part of the rom, just FYI. Also kernels are flashable as well, just has to be done through a workaround method.
Click to expand...
Click to collapse
Ahh, touche. I was under the impression that flashing kernels was a proof of concept still not a done deal. Also, I wrote boot animation but was thinking splash screen regardless you are right.
Was just about to post the same thing actually. I just had my phone exchanged today and got the UPDATED sticker on it. Haven't tried to root it yet, though. Was going to wait a while to see if this topic came up/new update gets rooted. I really don't want to mess with it either. Just popped in to say that I got the same updated phone.
My co-worker received his phone yesterday and wanted me to root it for him, but it showed "updated" as well - new build/baseband number. To be safe I decided to hold off on rooting till we get some sort of confirmation.
huskyjayboy said:
My co-worker received his phone yesterday and wanted me to root it for him, but it showed "updated" as well - new build/baseband number. To be safe I decided to hold off on rooting till we get some sort of confirmation.
Click to expand...
Click to collapse
Well I was going to flash the rooted image last night but fell asleep while waiting for my phone to charge. I get home a little earlier tonight so I will try flashing and see what happens. According to invisiblek I should be able to just factory reset if flashing in Odin fails. I just don't wanna Bork my phone. I also want root though....lol
Sent from my SCH-I535 using xda app-developers app

Nexus S M200 can't update JellyBean?

i have Nexus S korean version (M200). Now, running ics 4.0.4(stock rom), and i try to check update Jeanbean. But i get " the system i currently up to date" . Cann't M200 update JB?? who can help me about this?? :crying:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
thank u very much.. hix, i think stock rom than better. but long time wait for update... i will update cook rom
JB on K200
ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted
zeehere said:
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted
Click to expand...
Click to collapse
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2
Articudos said:
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?
zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
ghanchi2000 said:
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?
Click to expand...
Click to collapse
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2
Articudos said:
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
Link: 404 page not found.:/
Radio compatitability depends on where u live.
If you experienced problem, look for this thread
http://forum.xda-developers.com/showthread.php?t=1116884
And flash krkc1 again.
If it's not compatitable, it can cause sudden signal drops and low mobile data speed.(afaik)
Sent from my Nexus S using Tapatalk 2
Thanks for the information. So far its been good. Will keep a watch.
Sent from my Nexus S using xda app-developers app
Correct the link
zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
The link is wrong.Please post the correct link please.I have been using ics on m200 so far.Its good.I would like to know if you've experienced
any issues on JB?
This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app
Confirmation
zeehere said:
This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
I am from Kolkata,India.Using m200 korean model.Have the same problem as the threadstarter.I guess when you're using it smoothly then inshallah,i too would.
Just to be pretty sure,you're telling me to follow ONLY this:
First up, let me tell you that doing this is not necessay to get the OTA or having a smooth JB experience. The JB OTA installs without a wipe which means the data is preserved.
UPDATE: Google has put up the full image for 4.1.1 [i9023, i9020a and i9020t] . Now you do not need to clean flash ICS and then JB. Follow the part 1 of the guide below and flash the JB image instead of ICS. Nothing more to it.
Thanks anshumandash for pointing it out
That being said, I wanted to have the real stock image on my Nexus S and then Upgrade to JellyBean. Below are the steps that I took.
Go to this GoogleAndroidImages page and download the appropriate image for your phone & download. Since mine is an international version a.k.a I9023, I chose that ROM.
The download will be a tar.gz file. Use a utility like 7Zip to uncompress it. The tar.gz will have a .tar file inside and the /tar file will have a folder. Extract the folder to your PC. For my download, the folder was named soju-imm76d
Next Steps will wipe your phone, completely
Reboot your phone into bootloader mode.
Open a command prompt, navigate to the folder in step 2.
Enter the below commands, the image file names are for my download, modify it to the file names in your folder before running (I assume that you have fastboot working)
fastboot flash bootloader bootloader-crespo-i9020xxkl1.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-i9020xxki1.img
fastboot reboot-bootloader
fastboot -w update image-soju-imm76d.zip
Click to expand...
Click to collapse
RIGHT?Meaning just the above process?
---------- Post added at 06:52 PM ---------- Previous post was at 06:47 PM ----------
also,this means it'll wipe all my data/apps/settings ? ?
Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app
zeehere said:
Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
You dere?.i downloaded m200 again and installed it.Which one did you download?
soju ,sojua, or sojuk?
i guess i was supposed to download soju
Yes you should have downloaded soju. Sojuk is the same Korean one.
Sent from my Nexus S using xda app-developers app

how do I upgrade to ICS

I recently got an htc sensation 4g 2 days ago, it is on 2.3.4. every time i go to setting>about phone>software update> check now I keep getting. You phone is up to date, There are no updates available for your phone. so how do I upgrade to ICS , is there another way to manually do it? Thank you.
ruffryder281 said:
I recently got an htc sensation 4g 2 days ago, it is on 2.3.4. every time i go to setting>about phone>software update> check now I keep getting. You phone is up to date, There are no updates available for your phone. so how do I upgrade to ICS , is there another way to manually do it? Thank you.
Click to expand...
Click to collapse
Here: http://www.androidegis.com/how-to/learn-how-to-upgrade-htc-sensation-to-official-ics-ota-update/
went to that website but seems the files are no longer available on the links.
ruffryder281 said:
went to that website but seems the files are no longer available on the links.
Click to expand...
Click to collapse
Yeah. I did some research and basically couldn't find any manual way of doing it. Now you have two options:
1) If you really want the official, call T-Mobile up and ask whats going on and they'll definitely fix your problem.
2) Your other option is to root your phone. Now this is a little bit risky but if you follow all the proper steps, you'll be golden. And with rooting, you can even get a Jelly Bean ROM. It basically unlocks so many features on your phone.
ruffryder281 said:
I recently got an htc sensation 4g 2 days ago, it is on 2.3.4. every time i go to setting>about phone>software update> check now I keep getting. You phone is up to date, There are no updates available for your phone. so how do I upgrade to ICS , is there another way to manually do it? Thank you.
Click to expand...
Click to collapse
Hi,
Do you only want to update via HTC update,or are you willing to s-off your phone?
Just wanted the htc update im not much of a fan of rooting.
Sent from my SGH-T889 using xda app-developers app
Just a thought. Are you sure you are on stock unrooted Rom? I know sometimes folks buy the sensation now used, and the previous owner may not have put the device back to S-on. That could be a reason its not updating OTA.
Sent from my HTC Sensation 4G using Tapatalk 2
Im pretty sure its stock and unrooted, I thought it would be easy by doing it with a computer like samsung kies but it seems with htc ota is the only way unless i find the file some where and do it manually.
Sent from my SGH-T889 using xda app-developers app
ruffryder281 said:
Im pretty sure its stock and unrooted, I thought it would be easy by doing it with a computer like samsung kies but it seems with htc ota is the only way unless i find the file some where and do it manually.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
try to use an ruu.exe for upgrade
http://forum.xda-developers.com/showthread.php?t=1672425

Take VRBMF1 Update Before Rooting

I haven't been prompted to update to VRBMF1 yet and haven't manually updated. I am still on VRBMB1. Ready to try Beans' one click root method but not sure whether to take the update first or not. Anyone have any suggestions?
Pretty sure it'll work, it doesn't really matter if you're going to end up flashing a custom rom; but it's all preference maybe if you want the new modems just take the update.
Sent from my SCH-I535 using Tapatalk 4 Beta
Can you provide info if the one click method works for you. I am on VRBMF1. Never rooted before.
Just root. The newest update had signal and battery issues, along with many other issues. Verizon even pulled the OTA. Flashing a newer ROM will give you the newer features anyways, and it will be better.
Sent from my SCH-I535 using xda app-developers app
RBarnett09 said:
Just root. The newest update had signal and battery issues, along with many other issues. Verizon even pulled the OTA. Flashing a newer ROM will give you the newer features anyways, and it will be better.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
That's exactly what I did. Haven't flashed a custom ROM yet - still deciding which one to try first.
evm2556 said:
Can you provide info if the one click method works for you. I am on VRBMF1. Never rooted before.
Click to expand...
Click to collapse
It was incredibly easy. Only thing that tripped me up at first was that I didn't have the Samsung drivers installed on my PC. Since the thread didn't mention installing them I was assuming they weren't needed. You can get them here. Once I installed them and went through the steps in the thread, I was rooted and unlocked in a few seconds.
I highly recommend LiquidSmooth v2.7 if you'd like to get rid of TouchWiz.
Sent from my SCH-I535 using xda app-developers app
I used the one click from Bean Town, everything went alright . I was having issues with an app just now and rebooted the phone manually... now I got the Verizon detected unauthorized software crap. Be careful. I am also on MF1, now I got to try and figure out a way out.
um now what?
what if you're already rooted?
n07y0ur5 said:
what if you're already rooted?
Click to expand...
Click to collapse
I too am rooted and I am seeking the answer to this question. Personally I just want the annoying window to stop attacking me. It's assaulting me all day, but it won't install the update. Has someone setup a download that I can manually force to my SG3? (I have been searching but I admit I get lost reading other posts and then I'm outta time)
RBarnett09 said:
Just root. The newest update had signal and battery issues, along with many other issues. Verizon even pulled the OTA. Flashing a newer ROM will give you the newer features anyways, and it will be better.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
What method do you use to root? I'm on the VRBMF1 build already, on Verizon. I have the S3 toolkit from mskip, but it says it can't do anything until I get the bootloader unlocked. Now I can't find any method to unlock the bootloader for this build. I feel I'm just missing something stupid, but I can't find it :crying:
HeroesDieYoung said:
What method do you use to root? I'm on the VRBMF1 build already, on Verizon. I have the S3 toolkit from mskip, but it says it can't do anything until I get the bootloader unlocked. Now I can't find any method to unlock the bootloader for this build. I feel I'm just missing something stupid, but I can't find it :crying:
Click to expand...
Click to collapse
I used beans casual method. One click was done. Also on the MF1 update, it updated when I was leaving VZW store, 5 minutes after got home was running Revolt rom. Make sure to have correct divers and set screen on time to 5 minutes and to have java runtime environment installed on your computer.
Sent from my SCH-I535 using xda app-developers app

AT&T LG G2 update (not Kit Kat)

Looks like att is rolling out an update right now. Here is a link about it:
http://m.androidcentral.com/att-lg-g2-gets-quick-15mb-update-support-future-updates
I have included a screenshot also.
Sent from my LG-D800 using xda app-developers app
As usual kids, if you've rooted and put on a custom recovery or otherwise modified your ROM, DO NOT UPDATE.
And if you plan on rooting in the future, I also advise you to not update. See if the new version can be rooted with the current tools. Loki and the adb exploit have changed on some of the later versions.
LOL
Updating from 10o to 10q.
I don't have high hope seeing KK anytime soon.
Let's see.
Anyone have the radio from the update? I read that there is a new baseband...
I just got this also. Don't see much difference
Sent from my LG-D800 using XDA Premium 4 mobile app
Just when i was about to root and install a custom rom too....i'll see how this version is. Hopefully it fixes the battery drain AT&T background apps have been causing.
Anyone know how to turn off the auto update? I just downloaded like 750mb without realizing it. That's not cool.
Android The Greek said:
I just got this also. Don't see much difference
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you post the screenshot?
I just want to see whether the baseband different.
Update: ignore my post, overlook the OP one.
Anyway, based on what OP posted, only Software version changed from 10o to 10q, the baseband is the same.
Auto Download & Install
My G2 automatically downloaded this update and tried to install it, but caused a boot-loop with TWRP.
It was charging in another room so I had not accepted any requests to update, if there were any.
It is fixed, but I am angry that it downloaded and attempted to INSTALL the update on its own.
This is true!!! Only message I got was installing in 30 sec
Sent from my LG-D800 using XDA Premium 4 mobile app
the update only has the support for future updates for the g2,meaning, that it is most likely setting up for the 4.4 update. who knows when thats gonna happen though. hopefully soon
I guess this explains why my phone mysteriously booted into TWRP and i went into a bootloop while the phone was in my pocket during a meeting. I was able to fix it by following this http://forum.xda-developers.com/showthread.php?t=2451696 Hope this helps anyone in need.
jaxon5115 said:
My G2 automatically downloaded this update and tried to install it
Click to expand...
Click to collapse
Well that sucks.
We here in hawaii havent got it. Well at least i didnt. If it makes no visible difference then i can wait.
Tremulant1 said:
I guess this explains why my phone mysteriously booted into TWRP and i went into a bootloop while the phone was in my pocket during a meeting. I was able to fix it by following this http://forum.xda-developers.com/showthread.php?t=2451696 Hope this helps anyone in need.
Click to expand...
Click to collapse
Thank you for posting that link, it saved me as well. I'm furious that they forced the update on us like this
This happened to me as well, didn't see the post with the fix before I had already wiped all my data and such. Hope others see the post
khawajakustoms said:
Thank you for posting that link, it saved me as well. I'm furious that they forced the update on us like this
Click to expand...
Click to collapse
No problem! Glad I could help. :victory:
I do have a (possibly stupid) question, if I take this update while having root, but no custom recovery, should I expect havoc?
Sent from my LG-D800 using XDA Premium 4 mobile app
i have yet to see this update?????
neither do I.
Not a big deal, either.
File location?
Does anyone know where the update is located?
Is it "dev/block/platform/msm_sdcc.1/by-name/fota"?

Categories

Resources