Hey all ,I blocked one tablet three days ago, I tried to make root the first time did not work, the seventh time went, I made root with z4root ,then I said to give a restart, when I tried to open the image with android stuck ,i tried many things,but none went,if someone can edit a firmware to works on this tablet ? or someone knows a firmware compatible with this tablet ?or if someone konws wat its the problem and knows how to solve ,please ,details of the tablet : Android 2.3.4
Wi-Fi Yes
Bluetooth not
3G not
4G modem not
GPS not
Audio Output Yes
processor
ARM Cortex A8 Processor
Frequency of 1 GHz
Number of processor cores 1
Manufacturer: Myria
Model: DC-0162
technical Specifications
screen
Display Type: LCD
Technology: TFT Touch Panel
Screen Size (inches): 7
processor
Processor: Cortex
Processor Model: A8
Processor frequency (GHz): 1
data storage
Capacity (GB): 4
memory
Type: DDR3
Capacity (MB): 512
multimedia
Speakers: Yes ...
thanx
Android 4 ICS for Myria dc0162
Hy, after a month of searching on the internet i found the same tablet under a different name called Yarvik tab 220.
I am unable to post the link for the firmware because i m a new member here but you must try to find it on the Yarvik forum.
You also need a Livesuite program necessary for updating your tablet. I used for my myria tablet the instructions and the Livesuite from eboda.ro website.
Related
Hi There
I have just got a new tablet it is the first one I have had and I really enjoy useing it, what I would like to know is how to root it I have never rooted a tablet before but I did use to play about with HTC phones a while back and try different roms.
So if anyone could help and any advise would really be appreciated.
The tablet I have is a Natpc x210 also known as kingpad flytouch 9 10.1
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Thanks in advance
Fermec
Starting to think I have made the wrong choice buying one of these, no matter how hard I search I cannot find any Infomation on how to root this.
It is a great tablet but just can't root it
OK I have managed to root it this is how I did it
I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec
OK now I have managed to root the natpc x210, I would like to edit the build prop to make it think it is a Samsung Galaxy or Nexus 7 to give me more options from the market.
I have done a lot of searching but still not sure what to edit as I don't want to brick the tablet, I have installed build prop editor but could someone please tell what to change in the build prop.
Cheers
Fermec
hard reset
fermec said:
OK now I have managed to root the natpc x210, I would like to edit the build prop to make it think it is a Samsung Galaxy or Nexus 7 to give me more options from the market.
I have done a lot of searching but still not sure what to edit as I don't want to brick the tablet, I have installed build prop editor but could someone please tell what to change in the build prop.
Cheers
Fermec
Click to expand...
Click to collapse
How do you proceed for hard reset ?
Guys,
is someone using any quad core RK 3188 Android mini PC stick with Pi****u ? I know it should work there, but i need to choose which one has full wifi support in Pi****u. And also custom Android firmware for it in case i need revert to Android, because Pi****u erasing NAND.
Actually i want to buy Android TV Stick J22, it comes with dual wifi antenna, but not sure if wifi supported in Pi****u. Or Tronsmart-CX-919 http://www.amazon.com/Tronsmart-CX-919-Android-Ethernet-Adapter/dp/B00D05XSMY , but 1 wifi antenna.
Hello Member,
As i know i am very new to this forum.....
But I am a regular reader of this forum.
I need help about my China Tablet which is 9.7 inch dont know of which brand and on tabet there is no name of tablet mentioned on device/Box.
Few month ago the device was running on android 4.0.4... i think it was raw android... 1 month ago i read a article on XDA For cynogen 9 for china/All winner Tablet... So i downloaded and installed through sd card... but when my tablet restarted it shows a message...
" Encryption Unsuccessful " and it is showing a reset tablet button in bottom when i touched on it nothing happen..... Dont know why the touch is not working, So i attached a keyboard but nothing happen when i clicked on the button....
So after i tried many times to install different-different custom Rom by sd card. But each and every time it says.. " E: Signature Varification Failed"
Here Are The specification Of tablet..
OS- Android 4.0 Was installed But Currently It is Having Cynogen 9 (Not Working)
CPU- ARM Cortex-A8 1GHz
RAM- 1GB
ROM- 16GB
LCD- 9.7 INCH
TOUCH PANNEL- CAPACTIVE
2D/3D- AMD Granphic Accleration, Full Support
GRAPHIC- OpenGL ES2.0(AMD Z340) and Open VG1.1(AMD Z160)@27M Tri/sec
WIFI Wireless- Support 802.11b/g/n standarD, highest transmission get to 300Mbps, support local WAPI wireless protocol standard..
I Am Having Some ROM,CWM.. Pics Are Attached....
1- Start Screen-1
2- Start Screen-2
3- Start Screen-3
4- Error Message
5- Error While Installing Rom From Sd Card
6- All Android Developer Software
7- Custom Rom List
8- Cmw
Bro.... one thing more when i want to tell when i connect the device to pc.... it identify and install the drivers via internet... but not read the internal storage..... But in new it was working fine.....
Plz Help Me To Reacces My Tablet...
I will Be Very Thank Full To All Of You.......
THNX
Hi,
I hope this is the right place for my question.
I just bought the Toshiba Excite Go (AT7-C8) which has an Intel x86 processor and runs Android 4.4.2 (KitKat).
(Unfortunately I am not allowed to provide the link to the product page as a link, here a few specs:
Processor*Intel® Atom® Processor Z3735G (2MB Cache, Up to 1.83GHz)
Memory1GB (on board)
Storage*8GB eMMC
)
Since it has an x86 processor I was hoping I can install somehow a Linux system on this tablet. I would like to run some home automation applications (EIBD, Linknx and openHab) which I currently run on a Geode LX 800 system. I think this here is much more powerfull with nearly the same power consumption.
Unfortunately I have no idea how to do a Linux installation on such a Android based system. Did anyone already try this and may have a small tuturial?
Thanks a lot,
Ron
Nobody has an idea or hint?
Was someone able to get root access to this tablet?
I can't even move any app to the SD card.
I start to hate this tablet, as many applications are not available for it and I can't get a Linux system set up either ...
I would appriciate any suggestion.
Root
Hello
I found a universal method for tablets on Intel, but no one tested
the Toshiba AT7-C8
http://forum.xda-developers.com/andr...p-cwm-t2975096
Regards
Hello,
I have a jumper EZpad mini 2, purchased in China. For 120 €. Actually, everything was nice only the Android 4.4.4 had no Play Store and a few angry Chinese apps. After i got root the chinese apps were no problem any more. But i tried very much thinks to get the play store running .... at the end I unfortunately made the mistake of copy files that were intended for another tablet, directly into the system directory via root explorer. Since this i always get "Setup assistant" (or is it setupt wizard in english?) has been closed and googleserviceframwork has been closed. (all the time.. so again again and again) So I tried a factory reset. Even though I was almost clear that it will not help. Now i cant pass the beginning setup where you can chose your language and wifi because i still get the Setup assisatant failure.
But I tried to reinstall the Google Service Framework and the Setup Wizard with the ADB-tools but he wallways brings:
Failure [INSTALL_FAILED_OLDER_SDK]
When I go into recovery mode I have the option to load an update by ADB or internal memory.. I also have the possibility to get in a mode where he waits for fastboot commands...
Unfortunatly Jumper provides not roms or updates. It was even hard to get the USB-drivers for that Tablet
How can i fix my android problems?
Is there a universal CWM which also runs on that tablet without destroying the windows 10 funktion? Unfortunately, I've found so far no specific.
Can I repair the Setup Wizard and the framework still somehow?
Here are the key figures for the tablet:
Dual Boot Win 10 and Adroid 4.4.4
CPU: Intel Atom Baytrail T Z3735F Quad-Core Processor
Screen resolution: 1920 x 1200 (16:10)
RAM: 2GB, DDR3L
ROM: 64GB
Best regards
Prakti
Prakti said:
Hello,
I have a jumper EZpad mini 2, purchased in China. For 120 €. Actually, everything was nice only the Android 4.4.4 had no Play Store and a few angry Chinese apps. After i got root the chinese apps were no problem any more. But i tried very much thinks to get the play store running .... at the end I unfortunately made the mistake of copy files that were intended for another tablet, directly into the system directory via root explorer. Since this i always get "Setup assistant" (or is it setupt wizard in english?) has been closed and googleserviceframwork has been closed. (all the time.. so again again and again) So I tried a factory reset. Even though I was almost clear that it will not help. Now i cant pass the beginning setup where you can chose your language and wifi because i still get the Setup assisatant failure.
But I tried to reinstall the Google Service Framework and the Setup Wizard with the ADB-tools but he wallways brings:
Failure [INSTALL_FAILED_OLDER_SDK]
When I go into recovery mode I have the option to load an update by ADB or internal memory.. I also have the possibility to get in a mode where he waits for fastboot commands...
Unfortunatly Jumper provides not roms or updates. It was even hard to get the USB-drivers for that Tablet
How can i fix my android problems?
Is there a universal CWM which also runs on that tablet without destroying the windows 10 funktion? Unfortunately, I've found so far no specific.
Can I repair the Setup Wizard and the framework still somehow?
Here are the key figures for the tablet:
Dual Boot Win 10 and Adroid 4.4.4
CPU: Intel Atom Baytrail T Z3735F Quad-Core Processor
Screen resolution: 1920 x 1200 (16:10)
RAM: 2GB, DDR3L
ROM: 64GB
Best regards
Prakti
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. There isn't a specific forum for your device. However, you can ask for help here:
Android Q&A, Help & Troubleshooting
Good luck!