Related
I'm a noob and I tried to install 3e recovery using the instructions and video supplied in this post http://forum.xda-developers.com/showthread.php?t=1105413
Everything seemed to work fine until I went into ROM manager and tried to backup current ROM (stock, rooted). I selected backup ROM and now my phone is sitting with the SAMSUNG logo and it hasn't moved from that in almost an hour. I'm not sure what to do to get the phone to boot up normally. I have done a battery pull but that didn't work. When I plug the phone into my computer, XP does recognize that is plugged in because it shows the internal and external sd cards in the My Computer window. I can't open either on by double clicking on the icon for each drive. I'm getting pretty desperate because I can't seem to figure out how to get the phone to boot normally. Any help and/or suggestions would be most helpful. Thanks!!!
Odin flash to stock in dev section
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Thanks for all your help! I managed to get it back working using Odin. Now I'm on the Infused ROM and loving life. I'm going to save this post just in case I get into trouble again down the road.
Sent from my SAMSUNG-SGH-I997 using XDA App
Dani897 said:
try a hard reset. you shouldnt pull batteries unless it is the last resort, linux needs to unmount the file system.
a hard reset(different from a factory reset) is accomplished by holding the vol up +vol dn + power at the same time untill the phone reboots. if you wait till the samsung screen pops up again and immediately release you may also enter 3e recovery mode.
try to just boot the phone into the ui first. if it is still ok, go into rom manager and "flash cwm recovery" choose captivate or i9000. reboot into 3e recovery(blue text), (select reboot recovery not backup) reinstall packages twice! you should now be at a green text cwm recovery. once you get it setup the backup link in rom manager should work.
if the phone fails to boot up after a hard reset, you can attemp to clear user data in 3e recovery. you can get to 3e with phone off(you may pull battery now if you need to) hold vol up+ vol dn + pwr and hold untill you see the "samsung" screen. then you can clear data/factory reset
if that doesn't help you can still use odin/heimdall to restore the phone with one of the roms that may already have modded 3e recovery and other nice features.
Click to expand...
Click to collapse
hi dani, i got the same case. but mine cannot boot into CMW. my PC does not detect. any idea??
did you get this fix, I am having the same issue.
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
LG_iiNsTiiNcT said:
So u should use gtgs ultimate unbrick then follow this.
1: Root using super one click
2: Download 3e recovery save it to your SD card
3: Use root explorer to move the 3e recovery file to systim bin overwrite recovery file
4: Reboot phone
5: Download Rom manager and click flash clock work mod pic i9000 not the (mtd)
6: Once its done select reboot in recovery
7: In recovery click RE-INSTALL it should load then click re-install again and u should get green cwm then reboot and flash away
Sent from my SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
This is an old useless method... just Odin flash the community kernel v8... done..
Sent from my SGH-I997 using XDA App
I have had that same boot screen problem too, buy a jig and u can put it into download mode that way then when you use odin3 to restore stock, u can get the stock rom with the recovery in it for u and u just need to download the update.zip on rom manager and then go into recovery and run the update zip twice. http://forum.xda-developers.com/showthread.php?t=1092021
You should get a jig (http://www.ebay.com/sch/i.html?_nkw...dkw=jig&_osacat=0&_trksid=p3286.c0.m270.l1313) its a life saver in my opinion. because u can restore ur phone if u ever mess up.
I too am stuck at the Samsung logo. I've used Odin to revert to stock but I think the Stock I reverted to was AT&T rather than Rogers? I can't seem to find the Rogers stock. I've tried to get it into recovery mode, taking out the battery booting with power up and down, releasing power when the Samsung logo came up - no good, the logo stays. I'm at a loss? Any advice? Is the a full raft of pit / pda etc files for Odin that I can make the Rogers Infuse as it was day one?
Thanks for any help
I'm in the same boat... maybe it's because the rogers infuse comes as android 2.3? I hope a solution comes out soon!
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
I was trying to flash to Infused and when I got to the step where the phone rebooted to CWM recovery it hang on the Samsung logo. After about 3 hours of trying various button resets the phone booted normally (ie not to CWM). They say the definition of insanity is trying the same thing over and over and expecting different results, well I went back through the same steps to flash to infused and again it froze on the Samsung logo, only I have no idea what I did last time to get it to boot normal, not to CWM. Since it did it before, there must be a combination...anybody know what it might be. I've read and tried everything on the forums. Thought I'd post here prior to using Odin. I am able to get to downloading screen by doing the button/USB cable combo.
I'm headed out of town and won't check this right away, but thanks for any posts with ideas.
xoltrix2000 said:
Same here, Rogers Infuse. Stuck at Samsung logo. Tried infuse odin recovery, and community. Still no go. I tried flashing all the different stock/unbrick roms but nothing.
However, if I install Infused kernel/recovery, i can access the recovery and do a wipe/lagfix.
Click to expand...
Click to collapse
Rogers Infuse users need to use the UXKG3 unbrick, not the UCKD5 or E3 unbricks.
The UXKG3 variant tends to fall to the second or third pages of the dev forum since it's far less commonly used.
Holy Crap - im hooped without my phone for work...!
reposting in new thread
Hi guys,
Here is the solution for this issue.
Just flash with this package that will totally reset your Infuse 4G to UCKJ4, do it with linux that worked for me.
Thanks to AdamOutler
Here is the post:
http://forum.xda-developers.com/showthread.php?t=1331381
After that just root, flash a new kernel and your Recovery Mode will resturs.
samsung infuse 4g rogers version stucked on samsung logo(rooted)
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
samsung infuse 4g (I997R) rogers version got stuck samsung logo
my samsung infuse 4g (I997R) got stuck samsung logo since 4 days...my phone was rooted by use of odin later i changed my os from 2.3.3 to cynogen os.later my baboon brain provoked me to change to Infuse_4G_Remics-UX_v1.3.1.zip .i was my mistake -my phone got stuck with samsung logo and not booting its my favorite phone ever i had...please let me know anyone how to solve the problem in this regard......it will be big big help to me....and i will thankful to them,,,,,,,,,,,,,my email id
[email protected]
rajeshvarma999 said:
my samsung infuse 4g rogers version rooted with odin and with cynogen mod os running phone got strucked when changing the os to Infuse_4G_Remics-UX_v1.3.1.zip .it's showing only samsung logo and not booting to recovery screen when trying to get recovery ......anyone please help me regarding this problem.....it will be great help to me and most loving [email protected]
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=1326143
The few last posts have mirrors. You are gonna need the odin pack to flash back to stock and then work your way up.
You need to flash ICS before flashing JB.
Infuse 4G wont boot - no root, CWM, Passcode locked
Hi guys
I dont know where to start from. This Infuse 4G was dropped by the owner and we happened to come across it.
Checked the SIM card but that was already deactivated and there were no contacts on it.
Then we wanted to check the phonebook and find someone to contact, but the phone was passcode locked.
Then i went and flashed Odin_Community_Kernel_v8.zip since it was on GB, but it doesnt seem to be booting. I was planning on adb-ing into it when it was in recovery (CWM) so that i could delete the passcode and find a way to get in touch with the owner.
Now am stuck at the Samsung logo...:crying:
- I am running Android 2.3.6. I flashed the UCLB3 via Heimdall. I have GB bootloaders from Heimdall
- I have the bootloaders from Samsung Kies Mini
- I have USB Debugging on, but when I connect to the computer it says “USB Connected” rather than “USB debugging connected.”
- I try rooting through Odin using jscott's tar.md5 files in the PDA window, but the window does not turn yellow (indicating the phone is not recognized) and after the process the Gingerbread setup greets me, but I do not have Superuser.
- SuperOneClick just freezes up when I try to root.
- I've tried to use the modified 3e recovery via replacing the “recovery” file in /system/bin but there is no recovery file there and the paste “fails” due to lack of superuser access, I presume.
- Basically, I'm stuck and unable to root or flash anything that has SuperUser unless I can either get Odin to recognize my device or find another way that does.
When I first got the phone it was on froyo. I stupidly tried to flash an ICS ROM (Dark Knight) because I assumed it was on GB. I successfully rooted using SuperOneClick and flashed CWM recovery, but got the rainbow distortion from lack of GB bootloaders. I then proceeded to flash the UCLB3 via Heimdall and got my phone working again, but with ranbow distortion on boot and in recovery mode (rendering the CWM recovery useless as it would not respond with the rainbow distortion. I then re-flashed UCLB3 using Heimdall and checked the “GB bootloaders” box this time, which got rid of the distortion. But now I'm stuck and unable to root or flash anything because Odin won't recognize my device (it says it's there but the window does not turn yellow) and no other methods give me SuperUser. Kies Mini recognizes my device and says there are no updates, so it's not the cord. However, Kies regular does not. I think it's something to do with USB debugging not working properly and allowing Odin to recognize the phone so it can root it.
JoeyofBladez said:
- I am running Android 2.3.6. I flashed the UCLB3 via Heimdall. I have GB bootloaders from Heimdall
- I have the bootloaders from Samsung Kies Mini
- I have USB Debugging on, but when I connect to the computer it says “USB Connected” rather than “USB debugging connected.”
- I try rooting through Odin using jscott's tar.md5 files in the PDA window, but the window does not turn yellow (indicating the phone is not recognized) and after the process the Gingerbread setup greets me, but I do not have Superuser.
- SuperOneClick just freezes up when I try to root.
- I've tried to use the modified 3e recovery via replacing the “recovery” file in /system/bin but there is no recovery file there and the paste “fails” due to lack of superuser access, I presume.
- Basically, I'm stuck and unable to root or flash anything that has SuperUser unless I can either get Odin to recognize my device or find another way that does.
When I first got the phone it was on froyo. I stupidly tried to flash an ICS ROM (Dark Knight) because I assumed it was on GB. I successfully rooted using SuperOneClick and flashed CWM recovery, but got the rainbow distortion from lack of GB bootloaders. I then proceeded to flash the UCLB3 via Heimdall and got my phone working again, but with ranbow distortion on boot and in recovery mode (rendering the CWM recovery useless as it would not respond with the rainbow distortion. I then re-flashed UCLB3 using Heimdall and checked the “GB bootloaders” box this time, which got rid of the distortion. But now I'm stuck and unable to root or flash anything because Odin won't recognize my device (it says it's there but the window does not turn yellow) and no other methods give me SuperUser. Kies Mini recognizes my device and says there are no updates, so it's not the cord. However, Kies regular does not. I think it's something to do with USB debugging not working properly and allowing Odin to recognize the phone so it can root it.
Click to expand...
Click to collapse
download mode:
http://forum.xda-developers.com/showpost.php?p=25526654&postcount=3
profit
Thanks for quick reply and it worked!
I flashed a rom (Dark Knight) but every time I reboot, it goes straight to recovery. Do I need to change some settings or what? No matter how many times I flash it, the phone boots straight to CWM Recovery. What did I do wrong? What should I do now? I think I'm just stuck in a boot loop but I don't want to restore to stock and try again because I'll probably just keep making the same mistake. Instead I'd rather wait for someone to tell me why that flash didn't work and what I should do to make it work. Ive done work on a few other (newer) phones and I've never had this happen.
JoeyofBladez said:
I flashed a rom (Dark Knight) but every time I reboot, it goes straight to recovery. Do I need to change some settings or what? No matter how many times I flash it, the phone boots straight to CWM Recovery. What did I do wrong? What should I do now? I think I'm just stuck in a boot loop but I don't want to restore to stock and try again because I'll probably just keep making the same mistake. Instead I'd rather wait for someone to tell me why that flash didn't work and what I should do to make it work. Ive done work on a few other (newer) phones and I've never had this happen.
Click to expand...
Click to collapse
Read the OPs.
You need to flash CM9 twice, with a wipe in between.
If you accidentally did a reboot to recovery and suck in a loop, use the GB kernel flash in heimdall, wipe. Download mode, flash the Jt kernel and try again
qkster said:
Read the OPs.
You need to flash CM9 twice, with a wipe in between.
If you accidentally did a reboot to recovery and suck in a loop, use the GB kernel flash in heimdall, wipe. Download mode, flash the Jt kernel and try again
Click to expand...
Click to collapse
I read the instructions and i didn't see it say to wipe in between flashes, just to reboot recovery. I do follow directions you know but can't follow directions that aren't written in the spot I'm reading them and assuming them to be right. But thank you for telling me what I should havedone. So once I have jt kernel, I just flash, wipe, reboot recovery,and flash again?
I did the UCLB3 Repartition One Click and then wiped everything. Then I flashed JT's kernel and flashed the ROM. Before I could do anything else, it started on its own and everything is fine now. THanks for your help, I'm still a little confused but you pointed me in the right direction. Thanks will be given.
JoeyofBladez said:
I did the UCLB3 Repartition One Click and then wiped everything. Then I flashed JT's kernel and flashed the ROM. Before I could do anything else, it started on its own and everything is fine now. THanks for your help, I'm still a little confused but you pointed me in the right direction. Thanks will be given.
Click to expand...
Click to collapse
Glad it worked for you.
While in cwm recovery, re-boot into recovery means powering off and then turn back on with 3 finger salute.
Selecting "Reboot Recovery" may not work and may send a user into a loop recovery image.
I've found from experience that flashing a different kernel with different cwm version may erase that loop and let you start over.
As you have discovered what I've been saying along and if you read the ops on the heimdall thread, you will understand that rooting the official firmware is pointless if you are planning on flashing a custom firmware.
Root it only to run it with root permissions.
Flashing in download mode does not require root. Just flash the kernel with cwm recovery.
have fun
Hi, sorry for my bad english. Im from Vietnam, and im having a p6200
last night i tried to flash an the galaxy hd, the modified stock rom, through cwm, and i forgot to put it on external sdcard, i put it on the internal sdcard, and it failed to flash when system is erased. I've lost all my backup, because it was on the internal sdcard, but i still have the cwm recovery at that time.
Then, i tried to flash the 4.0.4 stock firmware through Odin. Flashing was ok, Odin show PASS!, but my tab is stuck on the SAMSUNG logo forever. This time looks like i've lost my root and cwm. I cannot access CWM nor stock recovery.
Then, i tried to flash back the stock 3.2, flashing still ok, but my tab got bootloop on the Samsung galaxy tab screen. I've tried the Vietnam fw and the UK fw both. When flashing is done and it's about to reset, ive seen just in a flash that there were 1 or 2 red line say that cannot access data/recovery... something.
I tried the emergency recovery in KIES. Never worked.
Now im out of option. I got bootloop on stock 3.2, stuck on 4.0.4, and i cannot access the recovery. Even when i try to flash recovery through Heimdall, it wont work. I can only access the download mode. By the way, the phone is neither stuck or bootloop, but it still charging through AC very good.
Did i hard brick my tab? Do i have to send it to warranty? Is my warrant now void? What options left do i have?
Panicing
Any one? Just tell me how can i get the recovery mode back
lpvlinh07 said:
Any one? Just tell me how can i get the recovery mode back
Click to expand...
Click to collapse
Same Here 100%
Please we need help
You are not alone.I was running 4.0.4 on my p6200 and was experimenting with the permanent CWM recovery and the temporary touch one.One thing led to another and my tablet was stuck at the samsung bootanimation.After a couple of reboots it was stuck at the galaxy tab plus logo.Finally it wouldn't boot anymore and my tab is literally dead.It doesn't respond to USB connection although it gets warm when plugged into an AC socket.I've been reading about the solutions extensively. There seems to be two : 1. Get it exchanged under warranty or 2. Get it Jtag-ed if you are out of warranty.
farazlodhi007 said:
You are not alone.I was running 4.0.4 on my p6200 and was experimenting with the permanent CWM recovery and the temporary touch one.One thing led to another and my tablet was stuck at the samsung bootanimation.After a couple of reboots it was stuck at the galaxy tab plus logo.Finally it wouldn't boot anymore and my tab is literally dead.It doesn't respond to USB connection although it gets warm when plugged into an AC socket.I've been reading about the solutions extensively. There seems to be two : 1. Get it exchanged under warranty or 2. Get it Jtag-ed if you are out of warranty.
Click to expand...
Click to collapse
Just got the CWM work on it.
But getting error each time i try to install .zip roms
Problem also that i don't have CWM backup file.
Do you think if i got my friend Tab (Same model exactly) and done a CWM backup on it and ther restore to my Tab will work?
als500 said:
Just got the CWM work on it.
But getting error each time i try to install .zip roms
Problem also that i don't have CWM backup file.
Do you think if i got my friend Tab (Same model exactly) and done a CWM backup on it and ther restore to my Tab will work?
Click to expand...
Click to collapse
that would work, unless you have a hard brick. of course, you should try it, and see if you can recover from the bootloops.
Hey guys it seems i have found a solution. Just find a stock heimdall package rom and flash with heimdall. Somehow heimdall seem to be able to do what odin couldnt. Now my tab is running stock ics smoothly. Just use heimdall to flash. I hope this gonna help someone who in the situation like i was.
Sent from my MT11i using xda app-developers app
i'm glad to hear that, i have same problem know, bootloop , stuck on samsung logo, after flashing cm9 , and do the wipe from stock android recovery
halim8051 said:
i'm glad to hear that, i have same problem know, bootloop , stuck on samsung logo, after flashing cm9 , and do the wipe from stock android recovery
Click to expand...
Click to collapse
Halim,
try this, hope can help u,
1) reflash using odin 1.85.
2) Check repartion and select .pit
3) Get .pit in this link.
For save. Flash hc and wipe data (Your data will lost). Hope u already backup.
http://forum.xda-developers.com/showthread.php?p=31915442
for others, don't ever wipe on any temporary recovery mode (Touch version) or ics stock recovery. Only use for flash root.zip and flash permanent recovery(cwr6.0.1.0).
Sent from my GT-P6200
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
I flashed the stock n8000 recovery file via odin and it booted me out of the update loop. I had to do it twice tho. I rooted via odin so our fixes may be different.
I used file posted here http://forum.xda-developers.com/showthread.php?p=30450339#post30450339 post 45
Hope this helps a little
ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
ej_424 said:
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
Click to expand...
Click to collapse
This need not be so complicated follow directions here http://forum.xda-developers.com/showthread.php?t=1847054&page=6 see post 58 and 39
Stuck, can't restore factory settings
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
bee_rob said:
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
Click to expand...
Click to collapse
I have same Problem
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
ultramag69 said:
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
Click to expand...
Click to collapse
Not working, not go the Recovery Mode, Only Samsung Logo.
I'm having similar issue as Odin keeps failing when trying to flash ROM.
Does anyone know the commands to do it through ADB? I've done it before on my nexus7 but don't know the commands to exactly use for the note. I still can't get into recovery. Only can get into that ODIN mode. I have all drivers and Android ADB installed on PC.
It seems like nothing will write to the NAND. Although my flash count changes now showing my attempts. I might have no choice but to call Samsung and file a warranty claim. I just don't want to lose all the pictures and info that's in my tablet.
Well I got my tablet back yesterday from Samsung. They fixed it. The report showed they replaced some piece that burned out. I forgot the name of it. Unfortunately all my info and stuff was erased. So I had to reinstall everything manually. At least my tablet working like new again. So glad to have it back. Been like a month or so since I've been able to use it. My nexus 7 and galaxy s3 was holding me down in the meanwhile.
This note is a great device. IM seeing again why I've missed it so much. Works flawlessly on stock Tom.
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
jackrabbit72380 said:
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
Click to expand...
Click to collapse
Follow the instructions from this post. Since you are soft bricked at the moment, you'll need to start at step 4. If you have an extSD in your phone, you might want to pull it until after you're up and running because the "Android" folder from Kitkat needs to be deleted and rebuilt for Lollipop.
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
jackrabbit72380 said:
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
Click to expand...
Click to collapse
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Ramer said:
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Click to expand...
Click to collapse
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
jackrabbit72380 said:
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
Click to expand...
Click to collapse
Try this: Do a battery pull, then put the phone in Download mode, hook up to PC and then open Odin and then Odin custom recovery, either twrp or Philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update Odin, there's a link to Odin 3.10.0 in my post. Let's see if we can get that far and go from there.
ramer said:
try this: Do a battery pull, then put the phone in download mode, hook up to pc and then open odin and odin custom recovery, either twrp or philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update odin, there's a link to odin 3.10.0 in my post. Let's see if we can get that far and go from there.
Click to expand...
Click to collapse
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
jackrabbit72380 said:
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
Click to expand...
Click to collapse
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Ramer said:
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Click to expand...
Click to collapse
Yes I tryed
I pulled the battery after Odin said PASS
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
when ever i try and boot the rom the phone vibrates 2 times and resets.
when ever i try to boot to recovery
i get
recovery booting....
recovery is not seandroid enforcing
set warranty bit : recovery
then phone reboots.
then it trys to boot the rom.
and vibrates 2 times and resets.
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
jackrabbit72380 said:
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
Click to expand...
Click to collapse
I saw your post count, I knew you knew what you're doing, just wanted to double check everything. Sorry, I'm out of ideas. I did ask @tdunham to take a look at this thread, if he has some other ideas, but he's offline right now. Hopefully he'll check in later.
What about flashing back to an older version of android? Full tar flash.
---------- Post added at 12:38 AM ---------- Previous post was at 12:36 AM ----------
Like ne5, and nothing else, just see if you can get stock to boot, no messing around trying to flash recovery.
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Ramer said:
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Click to expand...
Click to collapse
I tryied ni3 already
but as far as i know you cant downgrade the bootloader.
if i could flash just the bootloader for ota6 maybe that would help.
i will try downloading ne5 now but my last rom was running a nkd modem.
im going to try and flash G900P_NKD_FullRestore.tar in odin if that dont work ill try ne5
and will report back shortly.
well nkd full restore boots up to
unknowen error!
wait..
done!
udc start.
power reset or
unknown
upload mode.
this is the way i got it back from retech after they replaced my bezel and digitlizer and screen
i never had an issue with anything software wize before that.
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
tdunham said:
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
Click to expand...
Click to collapse
Yes I was using the pit file and yes I know to go to download mode from power off state. and no sim card is in the phone.
flashing ne5 stock with fingers crossed.
brb
nope
is there any bootloaders only i can flash?
well tryed everything all it does is vibrate 2 times. same as be4 im dead in the water. i don't know what's wrong or what to do.
I have tryed everything i can think of.
I can boot to download mode and flash anything i want but nothing works.
no recovery. no rom.