hi guys just want to ask, plz be parient to me just a nood here.
my question is, what if my phone is already gingerbread which is 2.3.4 firmware version is JP. sumthing like that, is it ok to flash directly to XXKPQ or it should be XXKPE first???? XXKPE is same version like JPKP5 which is 2.3.4..so hows that?
mizukage said:
hi guys just want to ask, plz be parient to me just a nood here.
my question is, what if my phone is already gingerbread which is 2.3.4 firmware version is JP. sumthing like that, is it ok to flash directly to XXKPQ or it should be XXKPE first???? XXKPE is same version like JPKP5 which is 2.3.4..so hows that?
Click to expand...
Click to collapse
Yes u can flash directly ddlf2 rom 2.3.6. It is the latest firmware.
vishal24387 said:
Yes u can flash directly ddlf2 rom 2.3.6. It is the latest firmware.
Click to expand...
Click to collapse
but in the tutorial it says better to flash XXKPE before flashing XXKPQ..
so it minz to say although my phone is JPKP5 is it okay to flash KPQ directly without flashing the said KPE as based? so it doesn't matter the firmware itself as long as the version is ok. for example i am in froyo region is middle east and want to upgrade to xxkpq for asian version. so is it alrigth directly flashing to asian version..am i right?:cyclops:
mizukage said:
but in the tutorial it says better to flash XXKPE before flashing XXKPQ..
so it minz to say although my phone is JPKP5 is it okay to flash KPQ directly without flashing the said KPE as based? so it doesn't matter the firmware itself as long as the version is ok. for example i am in froyo region is middle east and want to upgrade to xxkpq for asian version. so is it alrigth directly flashing to asian version..am i right?:cyclops:
Click to expand...
Click to collapse
I will explain u. Right now DDLF2 is most updated stock rom. If u are on any GB firmware then u can directly flash DDLF2 rom without any problem. But usually it is recommanded to have a clean flash. Means first flash xxkpe then flash ddlf2 rom to avoid any future problem.
vishal24387 said:
I will explain u. Right now DDLF2 is most updated stock rom. If u are on any GB firmware then u can directly flash DDLF2 rom without any problem. But usually it is recommanded to have a clean flash. Means first flash xxkpe then flash ddlf2 rom to avoid any future problem.
Click to expand...
Click to collapse
Whats that possible problem happen in.the future?
juztinlee said:
Whats that possible problem happen in.the future?
Click to expand...
Click to collapse
problem in the future means bootlooping, wifi breakdown (almost minutes or so to connect in wifi), sd card unavailable etc..if your reading every thread u may read problems that all users encountered.
Related
Can someone plz provide the firmware name and if possible the latest firmware information for India region for I5801
i am looking for official,untweaked firmware.
DDJP6 is the latest one they say, as to my knowledge samsung rolled out a update to that too like a month ago..
can someone provide the stock firmware, unable to update via kies.
DDJP6 is the latest
If they released another one I have info. Show me the proof.
Nope.. i don't have any proof
i am hoping to get the latest stock firmware on my G3.
can plz provide firmware file for I5801DDJP6 then?
*hopeful*
satishynd said:
Nope.. i don't have any proof
i am hoping to get the latest stock firmware on my G3.
can plz provide firmware file for I5801DDJP6 then?
*hopeful*
Click to expand...
Click to collapse
I am releasing DDJP6 firmware without boot loader by today.
And a custom ROM based on DDJP6 in coming days.
Just wait n see.
Oh thank you thank you...
egarly awaiting for stock DDJP6
it's going to be clean out of factory .. right?
like without any tweaks and changes..expect defined when released by samsung.. right??
PS: as we are on the topic
can plz tell me can I flash I5800XXJPS on my phone G3 ??
samfirmware says CSC = I5800NEE ... do i need that file? can i flash that..? it has no issues as battery drain i hear...
satishynd said:
Oh thank you thank you...
egarly awaiting for stock DDJP6
it's going to be clean out of factory .. right?
like without any tweaks and changes..expect defined when released by samsung.. right??
PS: as we are on the topic
can plz tell me can I flash I5800XXJPS on my phone G3 ??
samfirmware says CSC = I5800NEE ... do i need that file? can i flash that..? it has no issues as battery drain i hear...
Click to expand...
Click to collapse
Uploading right now.
No tweaks except removal of bootloader. The bootloader may be dangerous if there no proper care.
---------- Post added at 09:51 AM ---------- Previous post was at 09:51 AM ----------
http://forum.xda-developers.com/showthread.php?t=1372838
Hello,
I am new on android platform and i have some general questions.
For example, when i want to flash my kernel, is this kernel only for an especially firmware or can it be used for all firmwares ? I am from Germany and android 4.0.3 isnt published for my sgs 2 i9100g yet. So i flashed with odin 1.85 the original but indian firmware . Then i wanted to flash lucifr's kernel, but when odin was ready and it was succeed, my phone stucks in boot screen . Did i do something wrong ?
And when i fix this problem, should itry it a second time ? Sorry for my bad english
bushwracker said:
Hello,
I am new on android platform and i have some general questions.
For example, when i want to flash my kernel, is this kernel only for an especially firmware or can it be used for all firmwares ? I am from Germany and android 4.0.3 isnt published for my sgs 2 i9100g yet. So i flashed with odin 1.85 the original but indian firmware . Then i wanted to flash lucifr's kernel, but when odin was ready and it was succeed, my phone stucks in boot screen . Did i do something wrong ?
And when i fix this problem, should itry it a second time ? Sorry for my bad english
Click to expand...
Click to collapse
Do a wipe data/cache amd reflash again. Hope that helps. Press thanks if it resolves your issue.
Sent from my GT-I9100G using xda premium
Hi Guys,
I am updating my SGR for the first time, I had some queries, so if some one would answer, I would be really thankful.
Official ICS update is not for my country, so how should I take backup so that I don't lose my warranty.
Also which version of ICS is better, Nordic one or Austria or anyother country?
Also can you please help me with how to update like which software to use to install ICS, like someone was saying odin and others?
Thanks, Your help will be greatly appreciated
jimros said:
Hi Guys,
I am updating my SGR for the first time, I had some queries, so if some one would answer, I would be really thankful.
Official ICS update is not for my country, so how should I take backup so that I don't lose my warranty.
Also which version of ICS is better, Nordic one or Austria or anyother country?
Also can you please help me with how to update like which software to use to install ICS, like someone was saying odin and others?
Thanks, Your help will be greatly appreciated
Click to expand...
Click to collapse
1)you will not lose your warranty when flashing stock ics update!you could take backup by flashing clockwork and then take backupif u r so concerned!
follow this
http://forum.xda-developers.com/showthread.php?t=1406880
you can flash any countries ics but austria is prefered by developers !
and dost say thanks !hit thanks button :fingers-crossed:
jimros said:
Hi Guys,
I am updating my SGR for the first time, I had some queries, so if some one would answer, I would be really thankful.
Official ICS update is not for my country, so how should I take backup so that I don't lose my warranty.
Also which version of ICS is better, Nordic one or Austria or anyother country?
Also can you please help me with how to update like which software to use to install ICS, like someone was saying odin and others?
Thanks, Your help will be greatly appreciated
Click to expand...
Click to collapse
Buddy, A Very Warm Welcome to our Forum. For your queries Here is the answers:
1) Official ICS update is not for my country, so how should I take backup so that I don't lose my warranty.
A: ICS is announced to world by Samsung, so flash this wont loose any warranty but yes, rooting may be.
So, If you would flash Official ICS from Sammobile then no need to worry
2) Also can you please help me with how to update like which software to use to install ICS, like someone was saying odin and others?
A: you can install it using ODIN 3.07V - here is the procedure: Click Here for everything you need
3) Also which version of ICS is better, Nordic one or Austria or anyother country?
Approx, all versions are same except bloatwares providing by them. Few might be extra features then flash the latest one.
In the last, We have Q/A thread it doesn't mean every 2nd thread would be asking HOW to or From Where I can flash ICS.
Use Search option in thread. Coz every question you have asked, already been resolved earlier. There need to search only. Lil bit time taken, but good for our forum.
Thanks Kataria and Nilesh, So if I just update the firmware, I wont be losing any warranty.
How should I back up so that i can downgrade to gingerbread (2.3)?
jimros said:
Thanks Kataria and Nilesh, So if I just update the firmware, I wont be losing any warranty.
How should I back up so that i can downgrade to gingerbread (2.3)?
Click to expand...
Click to collapse
Better Take CWM backup before updating to ICS, So if you have problem then you can revert back to GB easily.....
jimros said:
Thanks Kataria and Nilesh, So if I just update the firmware, I wont be losing any warranty.
How should I back up so that i can downgrade to gingerbread (2.3)?
Click to expand...
Click to collapse
mj.vikram said:
Better Take CWM backup before updating to ICS, So if you have problem then you can revert back to GB easily.....
Click to expand...
Click to collapse
Yes...
mj is right...
there are cases when you downgrade..you tend to stuck on boot loop or on Samsung screen..
so the best way to downgrade is simply restore your cwm backup and then reflash the stock firmware..
Thanks MJ and Vipul
Can someone please provide the link of how to backup using CWN?
Do I need to root to backup using CWN?
jimros said:
Can someone please provide the link of how to backup using CWN?
Do I need to root to backup using CWN?
Click to expand...
Click to collapse
Flash CWM first and take backup, Root is not required for it....
Download any version of CWM from the below link and flash it using ODIN.
http://forum.xda-developers.com/showthread.php?t=1839900
Guide for flashing CWM on your mobile http://forum.xda-developers.com/showthread.php?t=1406664
1. Boot into recovery by pressing Power + Volume Up + Home..
2. Then select Back up & restore and select back up.
HI, Can we install Note 2 jellybean in Galaxy R?
jimros said:
HI, Can we install Note 2 jellybean in Galaxy R?
Click to expand...
Click to collapse
What? if you flash it you will brick you device .....
Thanks Actually I dont know much about android installation
Anyone tried ZSLPD or DXLP6 rom of ICS is it good. Please give your valuable comments
ajandial said:
Anyone tried ZSLPD or DXLP6 rom of ICS is it good. Please give your valuable comments
Click to expand...
Click to collapse
Both are same with diff bloatwares.
BTW, if u dont want warning from MOD then stop spamming.
Sent from my Galaxy R - using Tapatalk 2.4.1
Hi, What should I add to pda section?
CWM: http://www.mediafire.com/download.php?u98qal9rxwwvud0 (or)
ODIN: http://www.mediafire.com/download.php?50bkbbtblok3b02
ODIN ie pda section always takes .tar file.
Thnx!
Thanks, Actually It was not moving forward so I disconnected and now phone is not opening up, Should the tar file be the one of ICS nearly about 650 mb for galaxy R
jimros said:
Thanks, Actually It was not moving forward so I disconnected and now phone is not opening up, Should the tar file be the one of ICS nearly about 650 mb for galaxy R
Click to expand...
Click to collapse
Yep the size is going to be that much....and have patience, the flashing process takes time.
Thanx!
Actually the situation is I have 2.3 installed in my Galaxy R, and want to update to ICS, so first i need to flash, but in pda section of odin, should i put 2.3 tar file or ics tar fiile?
jimros said:
Actually the situation is I have 2.3 installed in my Galaxy R, and want to update to ICS, so first i need to flash, but in pda section of odin, should i put 2.3 tar file or ics tar fiile?
Click to expand...
Click to collapse
you need put ICS tar file in PDA section..
I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
njayann said:
I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
Click to expand...
Click to collapse
how did u flash ur phone?.try flashing xxkpe twice with all the files and then flash ddlf2.also do a complete wipe.did u flash indian rom before going to service centre?u have to flash indian rom before going to service centre.some times bootloop can be cured with simple solutions and sometimes it may be a hardware(motherboard)problem.search xda i9003 bootloop solutions.there are some threads on bootloop problems
njayann said:
I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
Click to expand...
Click to collapse
LOL at Samsung service center!
U can easily repair it yourself. Just go through some related threads.
I suggest u to root it 1st then flash DDLF2 firmware.
Sent from my GT-I9003.
njayann said:
I have upgraded my galaxy gt i9003 From FROYO to gingerbread, But while upgrading i chose wrong country firmware( i9003JPKP5) instead of I9003ODDLF2_INU. After upgrade incoming calls were blocked,I wasnt getting calls, When any user calls he was getting busy tone.
Later I tried upgrading to ODDLF2 my native country firmware and my phone started to restart every time (Boot Loop)(soft brick i think) .After trying multiple times I wasnt successful. Finally i decided to give my phone to SAMSUNG service center and after couple of days they also said my phone cant be repaired bcoz of overseas version, it needs mother board replacement. Pls help me i m clueless what to do next , Is my phone Ir-repairable ?
Click to expand...
Click to collapse
Next time, if you're not sure/familiar about phone's official updates, please bring it to back to their service centre for further assistance.
Siddhant Shankpal said:
LOL at Samsung service center!
U can easily repair it yourself. Just go through some related threads.
I suggest u to root it 1st then flash DDLF2 firmware.
Sent from my GT-I9003.
Click to expand...
Click to collapse
Thanks for your reply : Now My hand set has FROYO xxKB3 ,down graded by SAMSUNG service center ppl n gave it to me . Can pls tell the steps to follow after this ? i am asking you bcoz i am scared of doing wrong steps which i already did earlier......
pratik_s said:
how did u flash ur phone?.try flashing xxkpe twice with all the files and then flash ddlf2.also do a complete wipe.did u flash indian rom before going to service centre?u have to flash indian rom before going to service centre.some times bootloop can be cured with simple solutions and sometimes it may be a hardware(motherboard)problem.search xda i9003 bootloop solutions.there are some threads on bootloop problems
Click to expand...
Click to collapse
I flashed using ODIN : After i found my phone having some problem I did many time flash and install ddlf2 Boot loop never went but when i switched back to JPkp5 my phone work well only incoming calls wont happen, then only i gave to service centre. Now they down graded to xxkp3, Pls tell me what i need to do !
njayann said:
Thanks for your reply : Now My hand set has FROYO xxKB3 ,down graded by SAMSUNG service center ppl n gave it to me . Can pls tell the steps to follow after this ? i am asking you bcoz i am scared of doing wrong steps which i already did earlier......
Click to expand...
Click to collapse
How much did they charge u for that?
Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1133787
Flash DDLF2, it's best firmware till date.
Any doubt? U can ask here or in that thread.
Good luck!
Sent from my GT-I9003.
Siddhant Shankpal said:
How much did they charge u for that?
Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1133787
Flash DDLF2, it's best firmware till date.
Any doubt? U can ask here or in that thread.
Good luck!
Sent from my GT-I9003.
Click to expand...
Click to collapse
My brother is using this mobile from the last 2 years. Now he's facing some issues with the stock os in his mobile, he asked me to update. I never had any samsung mobile, so I dont have any idea how to unlock the bootloader, how to install cwm recovery etc. If the latest 2.3.5 stock rom is good, then I will flash that. The device's firmware version is showing as DDKA5 and ddkb2. In the OP it says XKPQ was the good one to flash, is it possible to flash on my device. Thank u!
shree.cse said:
My brother is using this mobile from the last 2 years. Now he's facing some issues with the stock os in his mobile, he asked me to update. I never had any samsung mobile, so I dont have any idea how to unlock the bootloader, how to install cwm recovery etc. If the latest 2.3.5 stock rom is good, then I will flash that. The device's firmware version is showing as DDKA5 and ddkb2. In the OP it says XKPQ was the good one to flash, is it possible to flash on my device. Thank u!
Click to expand...
Click to collapse
The link I posted above has all the firmwares with instructions. I recommend u to flash DDLF2 (2.3.6) firmware through odin.
Sent from my GT-I9003 using xda premium
I think you can use any firmware from any country, you just have to flash the correct modem using odin
Siddhant Shankpal said:
How much did they charge u for that?
Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1133787
Flash DDLF2, it's best firmware till date.
Any doubt? U can ask here or in that thread.
Good luck!
Sent from my GT-I9003.
Click to expand...
Click to collapse
Siddhant the Link u specified above is for xxkpn-h..... but current my version is xxKB3 . i think there will be some difference. Can you please link me to flash xxkb3 and upgrade to DDLF2. PLs pls pls......
njayann said:
Siddhant the Link u specified above is for xxkpn-h..... but current my version is xxKB3 . i think there will be some difference. Can you please link me to flash xxkb3 and upgrade to DDLF2. PLs pls pls......
Click to expand...
Click to collapse
DDLF2 link:
http://forum.xda-developers.com/showthread.php?t=1741370
Good luck!
Sent from my GT-I9003.
Hello all,
I need AN OFFICIAL SAMSUNG RELEASED STOCK ROM Of GB 2.3.6 or 2.3.5 or 2.3.4 for Samsung GT-i9003 with Full arabic Language support
http://forum.xda-developers.com/showthread.php?t=1004647
This is the link to all GB STOCK roms .. and i guess u can set up arbic language during setup wizard.. still confirm it for others
swapnilpx said:
http://forum.xda-developers.com/showthread.php?t=1004647
This is the link to all GB STOCK roms .. and i guess u can set up arbic language during setup wizard.. still confirm it for others
Click to expand...
Click to collapse
ty for responding but this thread says [ROM] STOCK ROMS for GALAXY SL I9003 {NOW GINGERBREAD 2.3.6 my phone is S I9003 not SL or it's the same ???
DevastatedSoul said:
ty for responding but this thread says [ROM] STOCK ROMS for GALAXY SL I9003 {NOW GINGERBREAD 2.3.6 my phone is S I9003 not SL or it's the same ???
Click to expand...
Click to collapse
Here. The UAE Firmware, which has Arabic support.
I9003JPKPM
DevastatedSoul said:
ty for responding but this thread says [ROM] STOCK ROMS for GALAXY SL I9003 {NOW GINGERBREAD 2.3.6 my phone is S I9003 not SL or it's the same ???
Click to expand...
Click to collapse
Its the same
Sent from my GT-I9003 using xda app-developers app
nbrian2012 said:
Here. The UAE Firmware, which has Arabic support.
I9003JPKPM
Click to expand...
Click to collapse
Is this firmware is GB 2.3.6 ? and did it 3 files or 1 file? and plz tell me the right way to flash it
DevastatedSoul said:
Is this firmware is GB 2.3.6 ? and did it 3 files or 1 file? and plz tell me the right way to flash it
Click to expand...
Click to collapse
This is 2.3.6 but no, I'm not sure how the installation is done, sorry.
However, if you'd like.. try DDLF2. Follow the exact instructions. I hope you know how to flash stock firmwares using Odin? If not, PM me. And then root it.
Once you're done rooting the firmware, flash this via Clockwork Mod recovery. If you don't know how, again, PM me.
Then, flash this. It's got Arabic support and plus other cool mods like swipe to clear notifications and more.
nbrian2012 said:
This is 2.3.6 but no, I'm not sure how the installation is done, sorry.
However, if you'd like.. try DDLF2. Follow the exact instructions. I hope you know how to flash stock firmwares using Odin? If not, PM me. And then root it.
Once you're done rooting the firmware, flash this via Clockwork Mod recovery. If you don't know how, again, PM me.
Then, flash this. It's got Arabic support and plus other cool mods like swipe to clear notifications and more.
Click to expand...
Click to collapse
ty for ur great help i already flashed it by odin i i putted the file on PDA cell then i flashed on download mode but i can't root the mobile and i found firmware for Egypt i flashed it too but i couldn't root it also plus i can't use the MMS service coz when i try to install the configuration sms that sent to me by service provider (failed)