Related
My original device always seems to take forever to go below 100%, and I just got a new device that has the opposite issue - it never goes above 94%. So I did some further tests, tonight.
My 94% device goes down fairly steadily once unplugged. But, the device at 100% does not. Also, when the 100% device is drained and I recharge it, it still says it's charging when its at 100% - so what does this mean?
I think that the battery calibration is off, as we already assumed. So, my 94% device is really 100% and I suspect that it would survive beyond 0% as it probably still has 6% juice left in reality. And, in the case of the 100% device, it's probably mis-calibrated to 105 or 110% (or more?). Since the UI can't show you 105%, it just shows the max of 100% until it goes below 100% which can take some time. I also suspect that the device would cut out at 5% or 10% since it's actually drained completely.
So that's the reason, I think. As to the fix, I don't know. What's weird is that these two devices are so different in terms of how the battery status is calibrated.
How can this be fixed? Or "Recalibrated?
I'm letting one of them completely drain, to see what happens.
At least the 94% one gives me an idea on what the battery life is, since I can just tack on +6%. But the one stuck at 100% is a complete mystery - it could be 5% off, 10% or even more.
Also, these run on 2 cell batteries making 7.4V nominal. All the devices before are using single cell batteries at 3.7V nominal. So Android may have issues with that voltage difference.
roebeet said:
I'm letting one of them completely drain, to see what happens.
At least the 94% one gives me an idea on what the battery life is, since I can just tack on +6%. But the one stuck at 100% is a complete mystery - it could be 5% off, 10% or even more.
Click to expand...
Click to collapse
I had the 100% battery issue before and it took a long time for it to dip below 100% (so long that it seemed unreal). Later I decided to let it drain to zero before recharging it to full again. Since then the battery indicator seemed to behave normally and discharged at a normal rate when the tablet was in use.
Have you tried deleting /data/system/batterystats.bin to wipe battery status? Mine sits on 100% for ages so I'm trying this now.
roebeet said:
My original device always seems to take forever to go below 100%, and I just got a new device that has the opposite issue - it never goes above 94%. So I did some further tests, tonight.
My 94% device goes down fairly steadily once unplugged. But, the device at 100% does not. Also, when the 100% device is drained and I recharge it, it still says it's charging when its at 100% - so what does this mean?
I think that the battery calibration is off, as we already assumed. So, my 94% device is really 100% and I suspect that it would survive beyond 0% as it probably still has 6% juice left in reality. And, in the case of the 100% device, it's probably mis-calibrated to 105 or 110% (or more?). Since the UI can't show you 105%, it just shows the max of 100% until it goes below 100% which can take some time. I also suspect that the device would cut out at 5% or 10% since it's actually drained completely.
So that's the reason, I think. As to the fix, I don't know. What's weird is that these two devices are so different in terms of how the battery status is calibrated.
Click to expand...
Click to collapse
samepic said:
I had the 100% battery issue before and it took a long time for it to dip below 100% (so long that it seemed unreal). Later I decided to let it drain to zero before recharging it to full again. Since then the battery indicator seemed to behave normally and discharged at a normal rate when the tablet was in use.
Click to expand...
Click to collapse
I tried that once, by setting it to never shutoff and letting it go over night. The next morning I charged it to green plus 30m as someone suggested in the TnTL thread, but I still had the problem of the meter sticking at 100% for a long time.
Anyways, I installed 3.0.0(TnTL) on monday and decided to also use the CWM clear battery data option, and now it seems to be dropping more as expected, but I'm not entirely sure that I did it completely correctly as by the time that I did the clear battery data option it would've been below 100% charge since I did so AFTER running the update.zip... just have to wait and see now...
Battery Stays at 100% For Ages
My battery stayed at 100% for ages the first time I charged it. Then it dropped quickly and cut out around 50%. I recharged it and it seems to be behaving more normally now. It still seemed to hang at 100% for a while, but no where near as long as the first time. I'm waiting to see at what percentage it dies this time.
my zt 180 tablet never got above 94% also. And it dropped pretty quickly and at around 40% it seemed to get a second life and slow down, but eventually it went all the way down to about 10% and then I would charge it (about 3 hours max). It too is a 7.4v supply.
My Odroid T had a 3.4 supply and it was pretty linear, showed charged at 100% and went down accordingly, though the developers had some issues with a few software releases where it did behave erraticaly and they did a few patches that fixed it.
roebeet said:
My original device always seems to take forever to go below 100%, and I just got a new device that has the opposite issue - it never goes above 94%. So I did some further tests, tonight.
My 94% device goes down fairly steadily once unplugged. But, the device at 100% does not. Also, when the 100% device is drained and I recharge it, it still says it's charging when its at 100% - so what does this mean?
I think that the battery calibration is off, as we already assumed. So, my 94% device is really 100% and I suspect that it would survive beyond 0% as it probably still has 6% juice left in reality. And, in the case of the 100% device, it's probably mis-calibrated to 105 or 110% (or more?). Since the UI can't show you 105%, it just shows the max of 100% until it goes below 100% which can take some time. I also suspect that the device would cut out at 5% or 10% since it's actually drained completely.
So that's the reason, I think. As to the fix, I don't know. What's weird is that these two devices are so different in terms of how the battery status is calibrated.
Click to expand...
Click to collapse
Warning: Slightly off topic -
I'm glad Roebeet was able to get a 2nd Gtab. Hope you found a good discount. Happy Holidays!!!
Now back to the topic discussion...
Butch1326 said:
Warning: Slightly off topic -
I'm glad Roebeet was able to get a 2nd Gtab. Hope you found a good discount. Happy Holidays!!!
Now back to the topic discussion...
Click to expand...
Click to collapse
Off-Topic x2 : yep, got used one that another XDA user had returned!
On-Topic: Still waiting for the battery to discharge, it went to sleep last night. Getting close....
roebeet said:
Off-Topic x2 : yep, got used one that another XDA user had returned!
On-Topic: Still waiting for the battery to discharge, it went to sleep last night. Getting close....
Click to expand...
Click to collapse
I also had the issue of battery showing 100% for a long time and then cutting out around at 50%. One of the posts mentioned doing a battery stat wipe in CWM after charging to 100% + 30 minutes.
I did this with a little twist of my own.
I allowed the battery to drain completely and tab to shut off. Plugged in the charger and immediately did a battery wipe in CWM. Allowed the battery to charge fully upto 100% + let it be on charger for additional time till the battery symbol in the notification bar no more showed charging sign. Again did the battery stat wipe in CWM and then rebooted the tab.
Since then i observe that the battery has been draining as it should be expected to. down to 72% after about 4+ hours of use. I will still be monitoring the battery discharge further for two or three more charge cycles. But I feel doing battery stat wipe in cwm 2 times at full drain and then again at full charge might have helped caliberate it properly.
Let me know if anyone else tries this and gets same or different observations.
Try installing this to measure your current usage over the life of the battery... (dont have a GTab and still considering). Since most likely this widget and the battery monitor are using the same API we will see if its a hardware sensor issue or a software issue...
http://www.appbrain.com/app/currentwidget/com.manor.currentwidget
I suspect its in their battery monitor and not the sensor or API... if that is the case it should be easy to debug (if you have the source). Typically these issues are due to poor polling algorithms...
Im new to android so I am unfamiliar with profiling capabilities of the platform...(Still learning)
Perhaps this will be one of the 'little fixes' that will be present in the latest FW update when VS drops it tomorrow. I have the 100% unit BTW. A fix would be nice.
Reading this thread this morning it got me thinking about my gtab battery situation. When I first got the gtab, the battery stayed at 100% for hours, then the percentage dropped like a rock. Over time, the battery dropped in more regularly, although it drops in large numbers (like from 100% to 83%, then to 67%, and so on). I'm currently running TnT Lite 3.0.
This morning I charged the battery to 100%, and while plugged in (to the AC outlet), I reset the battery stats using cwm. The battery today has been steadily going down throughout the day as I would expect. In over 8 hours, I watched the battery go down steadily from 100% to 84%. So far, so good.
my exp
Tried draining once, just let it sit, didn't fix it.
Tried again but this time I kept the screen on and watched the voltage, shutdown was near 6.8 volts. Now the meter is accurate. YMMV...
@it'sDon - it wasn't fixed in the update.
I was in the same boat as most of you. Took a very long time to go down from 100% and then zonked out completely at ~10-15%. It's now been charging for a few hours and it's been sitting at 100% for quite a while but the light is still red (so it's still charging) which means it will probably happen again looks like it's charging to some value over 100% and when it discharges, knocks out while the meter is still reading as having juice. Roebeet is 100% on the money.
I am going to try the CWM battery value reset some of you mentioned to see if it does something once my light is green, then I won't charge it and watch it like a hawk once it hits 20% to see if it shuts down at 10-15% or a value less than 3% which is acceptable I think.
I never had a problem on my stock(ish) g-tablet. That is until I installed the latest update.
I had to do a data wipe before any of the cosmetic TnT changes would show. After that the battery now seems stuck at 100%. This wasn't that way before, so I will try draining the battery, and see what happens.
Since I found that this was tied to my latest update, I think that I should call CS and complain.
My battery drain didn't make a difference, either. Still haven't pinned down a fix that works.
At least those of you with 94% max have a general idea when your battery will die. With us "100% forever" ones, we have no clue.
Actually, I may not have a problem after all. I have had my tablet on for about two hours. It is now showing the battery at 86%.
Ok, so I've been experiencing this for the past few weeks now, and I'm getting sick of it. I plug up my phone to charge it overnight, or just to charge it when I know I will be in a place for a while. After a while, the phones battery will say 100%. But when I take the charger out, the battery isn't fully charged. It IMMEDIATELY jumps down to around 40% - 70%. I can get it fully charged after unplugging and replugging the charger in, sometimes numerous times of unplugging and replugging. Also, my battery has died on numerous occasions on between 10% - 15%. I calibrated my battery the first day I got it (as a replacement) and got decent juice from it, a noticeable improvement from the old battery. Am I the only one experiencing these issues? Is there a fix for it???
*NOTE* I'm on my 2nd battery (replacement) and this is also a replacement phone. Also running GummyCharged 1.8 GBE on EP1Q, RFS, w/Minimal Gummy theme, if that matters. Also, its not just my phone, my wifes Charge phone has the same setup and it does it also. So it may just be something wrong Gingerbreak. Never did it on FroYo. Gonna Odin back to FroYo and report back.
Sent from my Droid Charge, GummyCharged 1.8 GBE, Minimal Gummy v1.1 theme.
This is because you cannot leave the phone plugged in to charge for an extended period of time. Once the battery reaches 100%, it stops charging. It will start charging again later, after the percentage goes down to a certain set level. This is why you have the huge initial drop-off after taking it off the charger. If you want to leave the phone plugged in for an extended period of time, turn it off and plug it in to allow it to charge, then it won't discharge as quickly. Otherwise, this is normal behavior for all android phones, and trying to make it so that the phone stays at 100% full charge is bad for both the battery and phone.
I've been having some strange problems. My phone will die with between 4-8 percent battery left. I can turn it back on and once it drops another percent or two it will turn off again. I have calibrated it and my battery life is good but this is a strange issue. Upgrading to rc2 today.
Droid Charge/Gummy 1.9RC 2.3.4
youngpettyboi said:
Ok, so I've been experiencing this for the past few weeks now, and I'm getting sick of it. I plug up my phone to charge it overnight, or just to charge it when I know I will be in a place for a while. After a while, the phones battery will say 100%. But when I take the charger out, the battery isn't fully charged. Its usually on around 40% - 70%. I can get it fully charged after unplugging and replugging the charger in. Also, my battery has died on numerous occasions on between 10% - 15%. I calibrated my battery the first day I got it (as a replacement) and got decent juice from it, a noticeable improvement from the old battery. Am I the only one experiencing these issues? Is there a fix for it???
*NOTE* I'm on my 2nd battery (replacement) and this is also a replacement phone. Also running GummyCharged 1.8 GBE on EP1Q, RFS, w/Minimal Gummy theme, if that matters.
Sent from my Droid Charge, GummyCharged 1.8 GBE, Minimal Gummy v1.1 theme.
Click to expand...
Click to collapse
'
I have the exact same problem. It will just go from 50% to 100% in a second and then unplug and plug back in to make it work. i haven't been able to figure it out either. 2nd phone and 2nd battery as well with same issue. I guess it has to do with my habits somehow.
imnuts said:
This is because you cannot leave the phone plugged in to charge for an extended period of time. Once the battery reaches 100%, it stops charging. It will start charging again later, after the percentage goes down to a certain set level. This is why you have the huge initial drop-off after taking it off the charger. If you want to leave the phone plugged in for an extended period of time, turn it off and plug it in to allow it to charge, then it won't discharge as quickly. Otherwise, this is normal behavior for all android phones, and trying to make it so that the phone stays at 100% full charge is bad for both the battery and phone.
Click to expand...
Click to collapse
I believe the use case he is suggesting is a little different than what you are describing. When the phone is plugged in at say 12%, it charges for a while and gets to say 63%. At that point it jumps to 100% immediately. The phone must then be unplugged from the charger and re-plugged in and then it will continue properly to 100%.
Hopefully that is a little clearer.
I mean, usually I turn it off to charge. And I have that No Moar Powah app installed. So I set it to reboot at 100%, it does and when I take the charger out, it immediately drops to between said percentages. almost like clockwork. Very annoying. I understand what u mean Imnuts, but my Vibrant, HD2, or others never experienced this issue. Also, my first Charge, would keep a charge if I left it on the charger once it hit 100%. Maybe an issue with the charger itself? A Verizon rep told me to bring in the charger itself if the issue persists.
Sent from my SCH-I510 using XDA Premium App
Almost exactly my issue. I'm not understandings what the problem is. I'm assuming u have that issue also???
Sent from my SCH-I510 using XDA Premium App
Hmm i have the opposite of that problem every time i unplug my phone from charging overnight the battery meter would always read 100% never below that.
Also does anyone know which battery meter i should follow for battery calibration? The battery meter in the status bar, the battery level in system settings/about phone/status, the battery percentage at the lock screen or the battery meter on the screen when the phones off? They're all giving me different readings for some odd reason.
Sometimes I get that too, but for the most part, its the false readings from the lockscreen, and the about phone settings. I may send off for a new phone, run stock for a few days to calibrate my battery then root on a full charge.
Sent from ur moms room... With my Droid Charge ;-)
imnuts said:
This is because you cannot leave the phone plugged in to charge for an extended period of time. Once the battery reaches 100%, it stops charging. It will start charging again later, after the percentage goes down to a certain set level. This is why you have the huge initial drop-off after taking it off the charger. If you want to leave the phone plugged in for an extended period of time, turn it off and plug it in to allow it to charge, then it won't discharge as quickly. Otherwise, this is normal behavior for all android phones, and trying to make it so that the phone stays at 100% full charge is bad for both the battery and phone.
Click to expand...
Click to collapse
I see what you're saying, but on the other hand I charge my phone overnight with no problems. Never did this before, but I don't have time to sit around for 6 hours for it to charge
Sent from my SCH-I510 using XDA App
Well I went back to FroYo GummyCharged v1.9 and lo and behold, the charging issues VANISHED. Charged my phone overnight last night and when I removed the charger, 100%. No drop immediately back down to 56% or some weird number. Maybe its a Gingerbreak leak issue. I've noticed that it only happens to my phone on Gingerbread. Also must mention, my wifes phone does it also. She's on Gingerbread. She complains that I broke her phone lol.
*EDIT* CONFIRMED. 2nd nite in a row, no issues charging.
Sent from my SCH-I510 using XDA Premium App
imnuts said:
This is because you cannot leave the phone plugged in to charge for an extended period of time. Once the battery reaches 100%, it stops charging. It will start charging again later, after the percentage goes down to a certain set level. This is why you have the huge initial drop-off after taking it off the charger. If you want to leave the phone plugged in for an extended period of time, turn it off and plug it in to allow it to charge, then it won't discharge as quickly. Otherwise, this is normal behavior for all android phones, and trying to make it so that the phone stays at 100% full charge is bad for both the battery and phone.
Click to expand...
Click to collapse
Imnuts...ill have to disagree with you. This is the only android phone I've had this problem on, and I've had 6 different android phones. also, it only started happening for me when i went to Gingerbread. Going to flash back to Froyo and i will update.
Sent from my SCH-I510 using XDA App
Same here with me. It only started when I went to Gingerbread. Also happened on my wifes phone, also on GB. I went back to FroYo 2 days ago, and boom, no more charging issues. I can leave it on all nite and not get the random percentage drops. I gotta calibrate my battery now.
Sent from my SCH-I510 using XDA Premium App
Flashed back to Froyo and charged overnight, unplugged an hour ago and now I'm sitting at 96%.
Gingerbread be buggin' yo.
scriz said:
Flashed back to Froyo and charged overnight, unplugged an hour ago and now I'm sitting at 96%.
Gingerbread be buggin' yo.
Click to expand...
Click to collapse
So it was a Gingerbread bug (GingerBug???) right? My battery life seems way better also. 6+ hrs off the charger and I am sitting on 73%. Not bad for me.
Sent from my SCH-I510 using XDA Premium App
The mis-information in this thread regarding Li-ion batteries is getting out of hand.
I think many of us are thinking about ni-cad batteries in which all the "bad" things we are talking about in this thread apply.
for a Li-Ion Battery, there is no "memory" effect. this means you can charge it at any point during the discharge phase. You also do not need to allow the battery to drain fully and charge to full to "condition" the battery. Li-Ion batteries can be charged at any point up to any point (from 30% to 70%, then 50% to 90%) and it will not effect the batteries performance.
Li-Batteries also do not suffer from overcharging. The charging circuits in cell phones will charge the battery until it is full, and then trickle charge from then on. And because Li-ion batteries do not have memories, this type of charging will not effect performance.
Li-Ion batteries can only be charged a finite number of times. However, the number of times does not translate to the number of times you happen to plug it in. The batteries have a rated number of "charge cycles", this is when the power from the battery has been exhausted and then re-filled. If you always charge your battery at 50% - 100% then every 2 charges you are using 1 full charge cycle. The batteries in the charge are 1600mAh and have approx 500 charge cycles. if you discharged and charged your phone from 0 to 100% every day, your battery would last 500 days before it would start to suffer from poor performance.
the OP in this thread is having software related issues related to the phone mis-representing the correct charge level of the battery, and then stopping the charge cycle prematurely.
Remember, it is perfectly OK, and expected of you to charge your battery as many times as you need to. Keep the thing on the charger any chance you get, it is not going to hurt it, its designed to be used that way. This is why Li-Ion took over as the battery tech of choice compared to Ni-cad.
References:
http://en.wikipedia.org/wiki/Lithium-ion_battery (not a definitive reference, just a starting point for people interested)
http://www.geek.com/smartphone-buyers-guide/battery/ (A Few good sentences in this about the topic
http://www.apple.com/batteries/ipods.html (Another good source, Ipod also uses li-ion batteries - as do almost all consumer electronics)
Experience:
Electrical Engineer/Nuclear Physics Double Major
UC Davis, California
College of Engineering
msticlaru said:
The mis-information in this thread regarding Li-ion batteries is getting out of hand.
I think many of us are thinking about ni-cad batteries in which all the "bad" things we are talking about in this thread apply.
for a Li-Ion Battery, there is no "memory" effect. this means you can charge it at any point during the discharge phase. You also do not need to allow the battery to drain fully and charge to full to "condition" the battery. Li-Ion batteries can be charged at any point up to any point (from 30% to 70%, then 50% to 90%) and it will not effect the batteries performance.
Li-Batteries also do not suffer from overcharging. The charging circuits in cell phones will charge the battery until it is full, and then trickle charge from then on. And because Li-ion batteries do not have memories, this type of charging will not effect performance.
Li-Ion batteries can only be charged a finite number of times. However, the number of times does not translate to the number of times you happen to plug it in. The batteries have a rated number of "charge cycles", this is when the power from the battery has been exhausted and then re-filled. If you always charge your battery at 50% - 100% then every 2 charges you are using 1 full charge cycle. The batteries in the charge are 1600mAh and have approx 500 charge cycles. if you discharged and charged your phone from 0 to 100% every day, your battery would last 500 days before it would start to suffer from poor performance.
the OP in this thread is having software related issues related to the phone mis-representing the correct charge level of the battery, and then stopping the charge cycle prematurely.
Remember, it is perfectly OK, and expected of you to charge your battery as many times as you need to. Keep the thing on the charger any chance you get, it is not going to hurt it, its designed to be used that way. This is why Li-Ion took over as the battery tech of choice compared to Ni-cad.
References:
http://en.wikipedia.org/wiki/Lithium-ion_battery (not a definitive reference, just a starting point for people interested)
http://www.geek.com/smartphone-buyers-guide/battery/ (A Few good sentences in this about the topic
http://www.apple.com/batteries/ipods.html (Another good source, Ipod also uses li-ion batteries - as do almost all consumer electronics)
Experience:
Electrical Engineer/Nuclear Physics Double Major
UC Davis, California
College of Engineering
Click to expand...
Click to collapse
This coming from a person WHO KNOWS WHAT HE IS TALKING ABOUT is very beneficial to us. Knowing that there is no way to actually "condition" a Li-Ion battery means that us who are actually suffer from poor battery life either have defective units or defective batteries. I hear of this miraculous 2 day battery life, yet I struggle to get thru a full 7 or 8 hrs with moderate usage. And this is a replacement unit AND battery. None of my other phones had that issue of immediately droping percentages like that, so I figured it was a software issue, that's why I went back to FroYo to test it out. Seems I was right. Gingerbread has a software issue that keeps the battery on some phones from reaching a full charge. Also my phone would be boiling hot during the charging process. Since reverting back, I've had no issues. Thanks for the insight. Coning from a knowledgeable source, it means a lot. Thanks!!!
Sent from my SCH-I510 using XDA Premium App
So I plugged my GN in last night and stayed up late enough to see it reach 100%, but I left it charging all night. When I woke up this morning, the lock screen said Charged but my battery widget said 97%. This has happened a few times and every time I can fix it by just unplugging it and plugging it back in. Anyone know why it does this? Could it be because I get lots of emails at night and the LED running all night decreases the battery a little? Thanks!
I think it stops charging when it reaches 100%, therefore the 3% may be lost during that time. This is a good thing, because a laptop, or anything else, eventually the battery will go bad. When you unplug it, then plug it back in, it can cause that battery to go bad faster. Again, I think this is it. My phone seems to do that. I would not worry about it though.
Hi everyone
My problem is.. my DS started to charge slowly.
Now it doesn't really charge slowly, If I check the voltage, I will get like 4220mv but as soon as it reaches that, the charging graph just goes flat.
If say I have charged it to 70% and it started going slow. i switch it off, place on the charger, and the lamp goes green. I turn it on, and it is showing 100%.
I have tried calibrations, diffirent kernels, wiping, factory resets e.t.c.
Another thing is that if I will run a v6 battery calibrator,it will show that actually I should have a 100% charge although a phone is showing only 70%.
So the summary: Phone charges normally when off (when recovery monitors charging), showing the correct voltage when on... But showing the wrong percentage if on charge.
Also sometimes if the battery is like 14% left. And I turn the phone off and then on again, it will show 22% bearing the same voltage as when it was 14%.
Question: Is there any way to tweak the battery indicator so it would show % values same as the v6 calibrator does it or is it a hardware fault, if yes, which part of it ?
This happens to me on my older (original) battery, but not my new one. I bought the second battery when this problem started happening. So, I think it's just a symptom of an old battery.
By the way, if you leave it on charge long enough, it will eventually jump up to 100%.
Other than this weird behaviour, it has no real impact on anything.
Sent from my Nexus 7
Thought so, mines been acting similarly lately, but strangely enough it seems to be getting better
I think I found out..
I actually purchased a new battery recently, because my old one was jumping like crazy and started discharging in a few hours..
This new battery I bought from a mobile repair shop.
It is a cheap chinese battery with no name, anyhow I just took it out to take a look at it...
And guess what, it sais 1200mah..
Can the phone be confused because of that ?
Not sure what's happening with my phone, but after removing the plug on my fully charged phone, I will let my phone sit idle for about 10 mins, when I go wake the screen, I see that I've already lost 3% of battery capacity.
The weird part is after this initial 3% is gone, my battery will drain normally. Does this mean I need to calibrate my battery? Is there anyway to do this without damaging it?
It means you need to get a new hobby... seriously, why do you care if it changes nothing what so ever. In order to fix this, you should try not checking your battery percentage every 2 minutes. On the upside, this will probably give you another half hour of battery life as well.(damn a change of attitude would fix like 90% of problems on this site)
On a more serious note, it's likely just because your phone doesn't keep charging when it hits full charge, it stops charging in order to not kill your battery, and lets it drain to like 90% at which point it will charge back up to 100%, so it may be at any point in between when you disconnect it. Even if it is truly at 100% when you disconnect the charger, the measurements may not be completely accurate when approaching 100%, so it is likely, that could make it drop faster at first. You need to do nothing in order to fix this, seriously don't mess with it.
CoronaDelux said:
Not sure what's happening with my phone, but after removing the plug on my fully charged phone, I will let my phone sit idle for about 10 mins, when I go wake the screen, I see that I've already lost 3% of battery capacity.
The weird part is after this initial 3% is gone, my battery will drain normally. Does this mean I need to calibrate my battery? Is there anyway to do this without damaging it?
Click to expand...
Click to collapse
Are you running stock or custom kernel and any custom ROM? Ive noticed this sometimes too but that's because the phone, when unplugged is running services to start phone on battery power versus the cord/wall charger. Check logcats to see what happens when phone unplugged to see what may be happening when phone starts on battery.
I think you are worrying about it a little too much. It could be searching for service (which drains a lot of battery), starting services as someone previously said, heat is horrible for a battery, anything. If the drain is normal after that who knows it could be the ROM you are on, battery percentage not being reported correctly.
Not worth an RMA by any means. Reset battery stats in recovery and see how that works out for you.
Bear in mind, these batteries are cell batteries, a user who plugs their phone in every time the battery hits 50%, is going to notice over a period of time the time it takes to go from 100% to 50% is shorter and shorter, and suddenly, 49%-0 holds a better charge. If you're constantly charging your phone, you'll wear those cells of your battery down. This is where the "hoax" of always letting your battery drain to 0% when you get it to "maximize" battery potential came from.