I have a HTC Desire, which I rooted using Unrevoked.
This updated my recovery to ClockworkMod 2.5.0.7 - which was great and I was able to backup/restore/apply new roms. Also ROM Manager worked and I could use that application to access the recovery modes/scripts.
ROM Manager then got updated, including the ClockworkMod (5.0.2.0). Now ROM Manager fails to run any of the scripts when starting in recovery mode.
When I manually boot in to recovery, I am still on the 2.5.0.7 version and not the latest. I've tried applying the 5.0.2.0 update - which updates for that boot, but on a reboot reverts back to 2.5.0.7.
So, my questions are;
- To update my recovery program do I need S-OFF? Currently still have S-ON.
- If S-OFF, will a simple 'apply update from sdcard' update it?
Thanks, A
----------------------------------------------------
HTC Desire (Bravo) - ICS 4.0.3 CM9, b0.2.5 ROM.
Samsung Galaxy 10.1 - Stock ROM.
I have S-ON on my Hero and I always updated my recovery. I don't think it would be a problem.
Don't use rom manager. Just copy the file to your SD and flash it manually trough recovery (flash/install zip from SD), it should work.
Thanks.
but.... nope! It's stuck on ClockworkMod 2.5.0.7! As I said I can flash it to 5.0.2.0 and use it, but next time I enter recovery it's back to 2.5.0.7!
If it's not S-ON that's causing it, could it because I rooted with Unrevoked? Some how that's locked it to 2.5.0.7?
Thanks, A
----------------------------------------------------
HTC Desire (Bravo) - ICS 4.0.3 CM9, b0.2.5 ROM.
Samsung Galaxy 10.1 - Stock ROM.
It could be unrevocked, but not sure. I rooted a Desire owned by a friend but with S-OFF.
He never had any issue.
Sent from my Hero using xda premium
Same problem
I have the same problem.
Some help?
Thanks
O.
same here...tried everything!
Same here.
Rom Manager fails. (says it's worked, but upon boot to recovery it's the same 2.5.0.7
Rom Toolbox just fails and admits it.
I tried following this http://forum.xda-developers.com/showthread.php?t=1608042 thread, and tried basically the same thing via the android-terminal as well. Every time it fails.
When trying via the terminal (android or adb) I get erase and write fails, and a run out of memory error. I would like to update CWM so that I can partition the SD using the phone.
Any help would be really appreciated. Thanks.
The Answer
Well I found the answer for me. My problem was that I still had S-On and had to get that to S-Off as apparently my phone (HTC Desire) has an advanced security feature put on by HTC that stops you writing to /System, which is a necessary location to write to to update CWM. I got S-Off by using revolutionary, which was pretty noob friendly despite the scary words on the page. (google for revolutionary s-off)
Revolutionary just requires the HBOOT version and the Serial Number of the phone, which you find under the battery. DLed the fastboot drivers as they recommended as well. Once I got S-Off, I was able to use Rom Manager to update the CWM to 5.0.2 or whatever the latest is now.
Hope this helps you as it did me.
PS I have previously tried re-running unrevoked whilst the phone had BCM ICS (CM9), which didn't work (error was "is your firmware too new?"). I then downgraded to CM 6, and tried again with unrevoked, but the Rom Manager still wouldn't upgrade CWM. I checked HBOOT and as suspected still had S-On...Revolutionary is your answer methinks
so which CWM RECOVERY is latest without S-OFF and with option to partition SD EXT2/3/4 etc? thanks.
So here's my story...
I unlocked the boot loader of my Sensation 4G, installed CWM recovery, and then flashed the SU zip file to root it.
I did a root check and it conformed that it was rooted.
I also installed Busybox.
After I rooted, I downloaded a few ROMs to try.
I downloaded the Viper ROM and ExtremeSensation ROM.
I dropped both ROM zips onto my SD card.
I then booted into CWM recovery to flash a new ROM to my Sensation.
I backed up my phone before attempting anything via CWM.
After backing up, I selected to install zip from SD and started to install the ROM.
I first tried the Viper ROM (latest).
It went through the install process and then booted.
It then got stuck on the boot screen.
I waited about 20 minutes and then gave up.
I did a full reset again, deleted cache and Dalvik.
I then installed the ROM again.
Once again... stuck on boot animation screen.
I then tried to install the ExtremeSensation ROM. (Its based on CM9)
I did the same procedure and deleted everything and installed the ROM.
It got to the boot screen animation and it stayed stuck on the boot screen animation for over 20 minutes.
It seemed like nothing would install.
I didnt realize that I had to make my Sensation "S-off"... it is still "S-on".
Now I am stuck with no ROMS.
I tried to install a stock rom. It is the 3.33.401.6 ROM.
When I try to install it, the installation aborts. Everytime.
I tried to restore my backup, but it says the MD5 checksum is invalid... looks like my only backup is corrupt.
What can I do to save my phone?
Any help would be SUPER appreciated!
Thanks!
Hi
I am going to assume your hboot is 1.2x.
Try reading THIS THREAD
malybru said:
Hi
I am going to assume your hboot is 1.2x.
Try reading THIS THREAD
Click to expand...
Click to collapse
Sorry, I should have put my hboot version.
It is on 1.27
iomega311 said:
Sorry, I should have put my hboot version.
It is on 1.27
Click to expand...
Click to collapse
Read the guide. Linked by malybru and start fresh again
Sent from my HTC Sensation 4G using xda premium
iomega311 said:
So here's my story...
I unlocked the boot loader of my Sensation 4G, installed CWM recovery, and then flashed the SU zip file to root it.
I did a root check and it conformed that it was rooted.
I also installed Busybox.
After I rooted, I downloaded a few ROMs to try.
I downloaded the Viper ROM and ExtremeSensation ROM.
I dropped both ROM zips onto my SD card.
I then booted into CWM recovery to flash a new ROM to my Sensation.
I backed up my phone before attempting anything via CWM.
After backing up, I selected to install zip from SD and started to install the ROM.
I first tried the Viper ROM (latest).
It went through the install process and then booted.
It then got stuck on the boot screen.
I waited about 20 minutes and then gave up.
I did a full reset again, deleted cache and Dalvik.
I then installed the ROM again.
Once again... stuck on boot animation screen.
I then tried to install the ExtremeSensation ROM. (Its based on CM9)
I did the same procedure and deleted everything and installed the ROM.
It got to the boot screen animation and it stayed stuck on the boot screen animation for over 20 minutes.
It seemed like nothing would install.
I didnt realize that I had to make my Sensation "S-off"... it is still "S-on".
Now I am stuck with no ROMS.
I tried to install a stock rom. It is the 3.33.401.6 ROM.
When I try to install it, the installation aborts. Everytime.
I tried to restore my backup, but it says the MD5 checksum is invalid... looks like my only backup is corrupt.
What can I do to save my phone?
Any help would be SUPER appreciated!
Thanks!
Click to expand...
Click to collapse
When installing new Custom ROMs you should SuperWipe before installing the new ROM. You can find the SuperWipe script in the ARHD thread. Just install zip from SDcard through CWM.
In the Download section of the OP from:
http://forum.xda-developers.com/showthread.php?t=1098849
Yes, S-OFF is a very good thing to have. I assume you have gone through the HTC Dev unlocking tool. There are a few guides on S-OFFing 1.2x.0000 HBOOT phones.
I had a similar issue with MD5 problems when trying to do a CWM recovery. Have you renamed the backup folder, if so you CANNOT have spaces in the new name. Renaming is fine just no spaces. If that's not the problem then sorry I don't know.
i had S-ON and HBoot 1.27.xxx.xxx, and i flashed android revolution, there is a good tutorial on how to flash with s-on
Sent from my HTC Sensation XE with Beats Audio using xda premium
Hi. My Norwegian HTC ONE S (S4) cid: HTC__y13, unlocked with HTCDEV.
(I have spent 16 hours now trying to get any ROM back up, so yes I have been searching for everything)
I have been running Cyanogenmod but wanted to go back to stock because the official Jelly Bean is just around the corner. In Clockworkmod I went a bit crazy with deleting all /sdcard /data.... etc.. I dont know if this made the problem?
I thought the easiest way to go back to stock was with an RUU, but it stops in the middle of the installation. (the info file contains my cid: HTC__y13)
I later read that the phone must have S-OFF to use RUU, and S-OFF is not possible with HTC One S??
Also tested the trick with manualle installing the ROM.zip off %temp% (relocked, but fastboot returned (remote: 44 hboot version check fail)
I have tried to go back to custom rom, I install the zip from Clockworkmod, after reboot it shows the ROMS Logo, but it doesn`t start up, tried the Cyanogenmod I was running earlier + MIUI.US and Untøchåbles.
Last fix i tried was this, with the same result:
Yes, I just fixed my problem yesterday after some serious trial-and-error.
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
5) Now, try the UTB rom (it worked for me), rename the zip file to something short (i.e. utb.zip), and push it to the sdcard using adb as follows:
Code:
adb push utb.zip /sdcard
6) While still in CWM, flash the zip.
The trick here is that only the stock recovery is capable of restoring access to the sdcard by it's proprietary "clear storage" option.
Good luck!
Sorry to bother you all, but is there any obvious reasons why my phone won`t boot?
Thank you in advance
You don't need soff to run ruu unless It's specific for this device. I never soff'd my amaze and still was able to flash ruu after renaming it
Sent from my HTC VLE_U using xda app-developers app
ERROR 155
Ok, maybe not... but I get ERROR 155 after a few minutes with RUU....
But If I only could get any custom rom running ...... argh!
I have a norwegian HTC one S, cid: HTC__y13, I can`t find an RUU for "Telenor" so I guess the "EUROPEAN" RUU is the correct one?
FIXED, Finally
Took only 20 hours of testing and failing....
Finally got the right RUU
1. Boot into bootloader
2. Flash stock boot - "ville_recovery_signed.img"
3. Clear Storage
4. Factory Reset
5. Most important of all.... get the right RUU... "RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed"
Tried to delete this Thread but couldn`t figure out how...
ryvaenge said:
Took only 20 hours of testing and failing....
Finally got the right RUU
1. Boot into bootloader
2. Flash stock boot - "ville_recovery_signed.img"
3. Clear Storage
4. Factory Reset
5. Most important of all.... get the right RUU... "RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed"
Tried to delete this Thread but couldn`t figure out how...
Click to expand...
Click to collapse
Thanks!
But I'm installing the RUU with TWRP recovery
So this is the first time I was trying to unlock bootloader/root and then install jellybean on my htc inspire 4g
I was able to unlock the bootloader using EasyUnlockTool
Then I was able to root it using EasyAceRootTool
I tried to be oversmart and downloaded a rom of Jellybean called cm-JellyTime_42_R7.zip and tried to install through the clockworkmod app on Android and when it rebooted, it got stuck on the HTC inspire white screen with HTC logo. I knew something was wrong.
I formatted the SD Card (Fat32) full format and put a PD98IMG.zip and first tried to go through HBOOT but it was hung on Parsing....[PD98IMG.zip] for 4 hours
Then I took the battery out. and the sd card. made it go through the hboot screen, down to recovery and it rebooted to the ClockworkMod recovery tool. Where I tried the PD98IMG.zip again and it says Installating then says Installation Aborted.
before trying PD98IMG.zip I did try and download to RUU it using
RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe
then RUU_Ace_Cingular_US_1.80.502.3_Radio_12.39.60.19_26.06.04.06_M_release_166557_signed.exe
but they all said this utility cannot install the rom on your phone , get the right utility, that happened right after 'sending...' portion of the RUU install.
So Now I am stuck with this and I don't how to move forward. any suggestions?
Because you are S-On, you need to extract the boot.img from the ROM zip and fastboot flash it each time you flash a ROM. I strongly advise that you search a little more before you freak out next time; that fact has been all over the forums recently.
bananagranola said:
Because you are S-On, you need to extract the boot.img from the ROM zip and fastboot flash it each time you flash a ROM. I strongly advise that you search a little more before you freak out next time; that fact has been all over the forums recently.
Click to expand...
Click to collapse
Thanks. that worked!
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
parostberg said:
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
Click to expand...
Click to collapse
You need to install 4EXT recovery. Enable smartflash (tools>enable smartflash). After that, you need to flash the boot.IMG of the ROM manually via adb.
Sent from my Ouya
parostberg said:
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
Click to expand...
Click to collapse
Don't take me the wrong way, but this is a very common issue.
Take the time to Google and Search first!!!
You just need the proper boot.img.
Either flash it using fastboot, or use 4ext SmartFlash!!!
Far_SighT said:
Don't take me the wrong way, but this is a very common issue.
Take the time to Google and Search first!!!
You just need the proper boot.img.
Either flash it using fastboot, or use 4ext SmartFlash!!!
Click to expand...
Click to collapse
Thanks for the reply.
I used 4ext SmartFlash and got the ViperS installed. But then I got problem creating Exchange and Hotmail accounts, I also had repeted questions about accessing facebook with Sense.
Therefor I installed Revelation 1.0.0 instead.
Installation was fine, but I had a message telling that there was one update pending. It also gave information that I had to set S-OFF.
Now the phone just reboot when the HTC logo shows.
It doesn't help to restore the old working installation.
The smartflash is enabled in 4Ext, even if I disable smartflash, when I reboot and go to recovery and 4Ext, the smartflash is enabled...
Try flashing boot.img manually.
Extract boot.img from your current rom's zip.
Then put your phone in fastboot, mode and type:
fastboot flash boot boot.img
You may want to backup if you have data that you need to save.
Jam that thanks button.
Thanks, I will try that!
Far_SighT said:
Try flashing boot.img manually.
Extract boot.img from your current rom's zip.
Then put your phone in fastboot, mode and type:
fastboot flash boot boot.img
You may want to backup if you have data that you need to save.
Jam that thanks button.
Click to expand...
Click to collapse
By the way, should the Sensation XE be in S-OFF or S-ON for ViperS and Revelation?
Far_SighT said:
Try flashing boot.img manually.
Extract boot.img from your current rom's zip.
Then put your phone in fastboot, mode and type:
fastboot flash boot boot.img
You may want to backup if you have data that you need to save.
Jam that thanks button.
Click to expand...
Click to collapse
parostberg said:
By the way, should the Sensation XE be in S-OFF or S-ON for ViperS and Revelation?
Click to expand...
Click to collapse
ANY ROM can be flashed S-ON (based on your current firmware, of course). The above roms are based on 3.32/3.33. If you upgraded to ICS via HTC OTA, you're good to go S-ON.
You do need to enable 4ext SmartFlash if you're flashing S-ON though (or flash the boot partition manually).
Far_SighT said:
ANY ROM can be flashed S-ON (based on your current firmware, of course). The above roms are based on 3.32/3.33. If you upgraded to ICS via HTC OTA, you're good to go S-ON.
You do need to enable 4ext SmartFlash if you're flashing S-ON though (or flash the boot partition manually).
Click to expand...
Click to collapse
I use to boot.img from the zip file (it's only 8.1MB?)
C:\android>fastboot flash boot boot.img
sending 'boot' (8126 KB)...
OKAY [ 1.852s]
writing 'boot'...
OKAY [ 9.391s]
finished. total time: 11.249s
Then when I reboot the phone, the HTC logo appear and then dissappear and the screen is black... (I feel like a compete noobie...)
parostberg said:
I use to boot.img from the zip file (it's only 8.1MB?)
C:\android>fastboot flash boot boot.img
sending 'boot' (8126 KB)...
OKAY [ 1.852s]
writing 'boot'...
OKAY [ 9.391s]
finished. total time: 11.249s
Then when I reboot the phone, the HTC logo appear and then dissappear and the screen is black... (I feel like a compete noobie...)
Click to expand...
Click to collapse
Try this:
1. Enable SmartFlash.
2. Do nandroid backup.
3. Do a full wipe except sdcard.
4. Flash rom.
5. Reboot.
Jam that thanks button.
Far_SighT said:
Try this:
1. Enable SmartFlash.
2. Do nandroid backup.
3. Do a full wipe except sdcard.
4. Flash rom.
5. Reboot.
Jam that thanks button.
Click to expand...
Click to collapse
If I run: fastboot flash boot boot.img and then install the zip file. It works with ViperS 3.1.1. But it's not posible to add a Exchange account/Hotmail.
Anyone have a fix for this?
It's also possible to install Revelation 1.0.0, but I get a error message about pending update when installing the update 1.0.1... - but i am fine with ViperS if I can have the Exchange account working. I had the sam error in Revelation 1.0.0.
parostberg said:
If I run: fastboot flash boot boot.img and then install the zip file. It works with ViperS 3.1.1. But it's not posible to add a Exchange account/Hotmail.
Anyone have a fix for this?
It's also possible to install Revelation 1.0.0, but I get a error message about pending update when installing the update 1.0.1... - but i am fine with ViperS if I can have the Exchange account working. I had the sam error in Revelation 1.0.0.
Click to expand...
Click to collapse
See this.
JAM THAT THANKS BUTTON.
Thanks for the reply.
So the workarround is to install 3.0.0 and then backup the accounts, and then install 3.1.1 and restore the accounts.
How about adding accounts later?
I have also found a bug with background syncronisation with Facebook: I get a constant message that ask me to activate background syncronisation. And it comes back when choosing "Yes".
Is it only me that have these issues, if so, what's special with my installation/phone?
Far_SighT said:
See this.
JAM THAT THANKS BUTTON.
Click to expand...
Click to collapse
Pls HELP ME!
parostberg said:
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
Click to expand...
Click to collapse
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
---------- Post added at 01:21 AM ---------- Previous post was at 01:16 AM ----------
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
HELP ME! said:
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
---------- Post added at 01:21 AM ---------- Previous post was at 01:16 AM ----------
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
Click to expand...
Click to collapse
post you bootloader details and what recovery do you have?
most probably its a incompatible firmware ..probably a ginger bread one ..after confirming this after he posted bootloader details ..he needs to flash 3.33 firmware
Pls HELP ME!
hello!
I have serious issues with my (HTC Sensation xe)rooted, boot unlocked and s-off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing
pls, any1 with solution???
can also mail me ([email protected]) plzzz
my bootloader details are:
*****UNLOCKED*****
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.18.000
RADIO-10.14.9035.02_2
eMMC-boot
Aug 2 2011,22:35:52
HELP ME! said:
hello!
I have serious issues with my (HTC Sensation xe)rooted, boot unlocked and s-off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing
pls, any1 with solution???
can also mail me ([email protected]) plzzz
my bootloader details are:
*****UNLOCKED*****
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.18.000
RADIO-10.14.9035.02_2
eMMC-boot
Aug 2 2011,22:35:52
Click to expand...
Click to collapse
man decrease the font size ..i get the point and solution is pretty simple for you
first relock the bootloader
to do that ...connect the phone from bootloader to pc ..(if properly connected phone should say FASTBOOT USB ..if its saying HBOOT ..press power button once )
then open command prompt from your adb/fastboot folder (i think you already have this folder ..if you did UNLOCK of bootloader ..generally on C:/Androidsdk/tools )
then type this command ..
fastboot oem lock
once that is done
go to firmware thread
link here
get the 3.33 universal firmware ...copy it to top of your sdcard (i mean to sdcard/ use a card reader to do this )
and flash it (flashing instructions in the same thread)
then install any ICS/JB ROM it should work
ganeshp said:
man decrease the font size ..i get the point and solution is pretty simple for you
first relock the bootloader
to do that ...connect the phone from bootloader to pc ..(if properly connected phone should say FASTBOOT USB ..if its saying HBOOT ..press power button once )
then open command prompt from your adb/fastboot folder (i think you already have this folder ..if you did UNLOCK of bootloader ..generally on C:/Androidsdk/tools )
then type this command ..
fastboot oem lock
once that is done
go to firmware thread
link here
get the 3.33 universal firmware ...copy it to top of your sdcard (i mean to sdcard/ use a card reader to do this )
and flash it (flashing instructions in the same thread)
then install any ICS/JB ROM it should work
Click to expand...
Click to collapse
he sent me a pm 2 days ago and i gave him the same solution
i don't know why he didn't do it yet
edit: is it necessary to lock the bootloader first?
rzr86 said:
he sent me a pm 2 days ago and i gave him the same solution
i don't know why he didn't do it yet
edit: is it necessary to lock the bootloader first?
Click to expand...
Click to collapse
yeah he might need to
sometimes the bootloader wont read the PG58IMG zip file from the sdcard