I have a very strange issue.
I have rooted + bootstrap/cwm, 5.5.1-edem-28.
Issue is, when ever I plug only the hdmi or hdmi+charger in, the screen basiccally refuses to work with touch.
But if I plug hdmi+usb (to laptop etc), touch works perfectly fine.
Does anyone have any idea what could be causing this?
Rom is basically stock except removing some Telecom apps and moto-chinese/english keyboard.
I may reflash system to see if any of the keyboard apps were required... But still strange....
Well.... I flashed and wiped completely back to stock. (grrrrr)...
No change, still only have touch response with hdmi only if usb laptop plugged in.
Not, even, with, ps3 usb plugged in...
Related
My Sensation is could not be recognized by a computer, even in hboot, i tried a few computers, none of them worked. But then when I try plugging it through a usb hub, it magically worked! albeit it works quite slow as it complains about not being USB 2.0, etc. Now this is really work, the phone can only be recognized when plugged via a hub, anyone knows what might be causing this?
PS, I tried another cable, both worked on my DHD perfectly but same problem with Sensation.
EDIT: I tried a usb 2.0 hub and it doesnt work, i think my phone's usb 2.0 is messed up.
Anyone knows of a firmware i should try flashing that would probably fix this?
it seems like even it gets connected to usb 1.0 hub, large file trasnfer(eg: a new rom) would still still halt halfway.
Tried a third cable and I am now starting to wonder if it is hardware related, i would off order a usb connector module off ebay, or send it to get fixed, but i wanna make sure it isnt software related...
btw, anyone knows how much technical skill would i need to replace the module? if it doesnt require soldering i am pretty confident to do it, i mean i had replaced the earpiece on my dhd before, now that was easy!
You have to pick the option to connect sdcard. If sense then drop down menu and pick disk drive if cm7 then turn on USB
Try to install HTC sync as well
I'm having a problem with my transformer, it wont turn on withou being connected to the dock or usb to a computer...
I've tried to install another rom but it still keeps the problem.. What can i do?
I've updated to ICS, is there any way that this update is related to the problem? thanks
EDIT: Installing custom rom, downgrading back to HC and it still remains.. What can i do?
Does it work properly after its booted? I mean, can you disconnect it from the dock/PC?
My first thought was "busted battery", but that doesnt quite seem to fit...
You could try draining the battery completely in the tablet, then leave it charging over night (turned off, not connected to dock or PC) and see if that helps.
Sounds like a bad power button. After it turn on with USB or dock connection, does it still stay power on and operate normally?
Yes, its fully operational... I've tried to reset battery stats too...
Hello everybody,
Yesterday I have got a system update message, I have clicked on yes. Then after one hour, the hdmi output has suddenly stopped to work.
I don't know what has been updated, android (4.2.1) or the firmware (JOP40D.WW_epad-10.6.1.14.10-20130801), the virtual keyboard is different now.
Normally a such issue would come from the firmware!?
I have tried to wipe data and power+lower volume, but it still doesn't work. I have tried another TV, same issue. The tablet even doesn't recognize the HDMI cable anymore. I don't have another device to test the micro hdmi cable.
The last time that I have made an update, the USB port was not working anymore, I had to wipe data to make it work again.
What can I do ?
My tablet is not "rooted" or "unlocked".
raptor6 said:
Hello everybody,
Yesterday I have got a system update message, I have clicked on yes. Then after one hour, the hdmi output has suddenly stopped to work.
I don't know what has been updated, android (4.2.1) or the firmware (JOP40D.WW_epad-10.6.1.14.10-20130801), the virtual keyboard is different now.
Normally a such issue would come from the firmware!?
I have tried to wipe data and power+lower volume, but it still doesn't work. I have tried another TV, same issue. The tablet even doesn't recognize the HDMI cable anymore. I don't have another device to test the micro hdmi cable.
The last time that I have made an update, the USB port was not working anymore, I had to wipe data to make it work again.
What can I do ?
My tablet is not "rooted" or "unlocked".
Click to expand...
Click to collapse
Well it sounds like you went from JB 4.1 to JB 4.2? Asus changed and broke some things with the HDMI output of the device. I don't know how to solve your issue but you can go back to the old firmware by using the firmware on the ASUS website.
here's the story:
after finding out about Opentrack, a program that allows me to turn my android phone into a headtracking device to play games with, i remembered i had an old motorola atrix that was half broken in a drawer somewhere and thought, maybe if i could revive it i can actually make it into a permanent headtracking device and glue it to some headphones or something.
after charging it up and booting, i discovered there was no way i was going to make it work, the screen is half shattered and the touch only works in some parts of the screen, and motorola's moto blur was making me sign in before i could do anything, and since the touchscreen isnt working on the third row of keys, typing ".com" at the end of any e-mail is impossible.
i've tried a few things:
tried using a usb on-the-go adapter to connect a mouse or keyboard, didnt work, and i did find the old dock the phone came with, which has 3 usb ports at the back, but i didnt find the power cable that came with it, so that didnt work either.
so before i chuck this thing in the garbage, is there any way to bypass this motoblur thing? maybe connecting it to a PC and controling it from there? installing a different ROM on it? i only need it to run the opentrack apk and be connected to my wifi.
i took a few pictures of it but i guess i cant post them.
The screen on my Motorola Droid Ultra broke (no visual, no touch that I can figure). It has a numeric lock screen (I know the code still) and although I have a computer that has connected to it previously, without unlocking it it will not show up in My Computer.
My primary goal is to be able to pull out Color Note memos and browser tabs/bookmarks for two or three browsers. Having it working would be neat but not required.
I envision this being done by fixing the phone (new screen) or some program that can have my computer serve as screen and input for the hardware.
USB debugging is off - probably because it broke Pokemon Go. SIM removed and disabled (been working on this off-and-on for over a year, at this point I am just stubborn and wanting to learn).
I tried replacing the screen, or rather, pulling out of board and putting it into a different Droid Ultra (same phone, different screen/digitizer and case). It did not work. I opened it up and tried reconnecting, still nothing. When plugged in as one does to charge it intermittently vibrates, which according to the internet seems to mean there is no screen connected. There is.
I have a pigtail USB, microUSB male, micro usb female, and with all that plugged in to the phone, computer (via charger/phone cord), and a keyboard the keyboard does not light up (capslock, num lock) but the phone starts the occasional buzzing for (what I assume is) the screen "unplugged". Not entirely sure how to know is phone is on or off, or if it will turn on at all with the screen "not connected" as it seems to think.
I so want to just be able to pull out the keyboard and plug it in like I can do with real computers. >.<
Any Ideas?
use a OTG cable and connect a mouse, it works!
look for screen mirroring software, to share data with your pc.