Related
Has anyone been successful in getting the extended rom hack to work on the Hermes. The CAB file i downloaded and ran said sucessful but I still cannot see it in my explorer. Has anyone tried themanual registry hack?
Try this, it works on mine.
low405 said:
Try this, it works on mine.
Click to expand...
Click to collapse
How can the Extended ROM then be protected again ?
Try this registry hack to hide the Extended ROM again, haven't tried it, but just messed around with the cab a little bit and found this:
Code:
HKLM\SOFTWARE\Drivers\MSYSEXT
"Background"=0x0 (0)
"Foreground"=0x0 (0)
HKLM\System\StorageManager\Profiles\EXT_FLASHDRV
"MountHidden"=0x1 (1)
Let me know if it works
Problems with Extended ROM
Okay guys I have looked all over for a solution to my problem. A few days ago I tryed updating my ROM. I had a crash and thought I almost lost my TyTN. I was able to recover from Bootloader and save it some what. I can now update the ROM but every one I use does not allow me to see the extended ROM whether I use the program or the reg. Hack. Any advice on were to look or any Idea on what to do?
pof how can i do with wm6
thanks
Hi,
I've been trying to download the file "/Magician/Shipped_ROMS/WWE_106600_115_10500.exe". The download succeeded. When i try to unpack this file (either with Winrar - any version - or by running the executable) i get a message saying the file is corrupted. So i end up with just some files, not all of them. As a result, when i try to upgrade the QTek S100 i get a message saying that "RU.dll" is missing (the file was never extracted because of the corrupted file).
This as caused me many problems. So, can anyone PLEASE HELP? It would be nice if someone could email me - [email protected] - (or post the direct links) the extracted files, so i can proceed.
PLEASE HELP!
Best regards...
I have downloaded the same rom (using the wiki link to the ftp) and extracted it with Winzip without any problems. I could not and will not try installing it on my device though. Your downloaded file is corrupt either due to a bad internet connection during download or bad sectors in your hard disk.
One suggestion though; you should have used a different title to your thread since you yourself have proven that downloading is not a problem but that you get a corrupted downloaded file.
I've tried to download it (and many other people on different machines and from different locations) and the download is corrupted. I used WinRar (old and new versions). It's strange that only this download seems corrupted (not only to me, but to many of my friends who tried to download it as well), since i download many files from many servers daily with no problems! So, if it worked for you, could you please email me the files?
Some of the files are too large to send via email. Tell me what files you're missing and can send them to you as long as they are not the large ones.
As I said, I can't 100% prove that the rom is not corrupted since I haven't tried installing it and will not do so. It could be that the rom is indeed corrupted during the upload.
Why not try another rom? This is quite an old one. The latest and last rom is the ver. 1.13 with radio 1.12.
Ok, so where is that ROM for download? Is it in "Shipped_ROMS"? If so, what file should i download?
I'm trying to solve the following problem: i've been trying to use my QTek S100 with my car (Audi). The problem is the following: i successfully connect the QTek to the car (bluetooth); it lasts for 15 minutes, after that the QTek just hangs and i have to do a soft reset. This behaviour is random - sometimes QTek doesn't hang, it only disconnects the bluetooth. If i turn on the QTek's light (right side button) the bluetooth comes back on.
I've tried to install bchs, but it didn't solve the problem. Any ideas?
The car works fine with Nokia phones. So, i'm really thinking about disposing my QTek...
Here's the link;ftp://ftp.xda-developers.com/Magician/Shipped_ROMS/. Look for the file WWE_11300_550_11200.exe. This is the latest and last ROM for Magician based devices.
Unfortunately I couldn't help you with your BT problem. I've long ago read some threads about this. Just try to do a search.
Can you please tell me how do i upgrade my bluetooth driver's version? I think that QTek S100 ships with 1.2 version. Can i upgrade it to 2.0?
I've never really bothered what bt version is in my device since i've never encountered problems. I believe that the bt firmware is automatically upgraded when a rom or especially a radio rom is installed.
Just loaded a copy of TomTom 6 to my device, the software runs fine but it turns off the backlight as soon as it loads and I can only see it in the sunlight! Anyone have any idea how to fix this?
Thanks
Martin
Try this!
I had the same problem.
Copy it over to the existing EXE. It worked for me!
Make sure you make a copy of the original file just incase it doesn't work and you need to restore it.
There are many post about this try to search!
I have done it by adapting the programm with a hex-editor. This is also discribed in many posts.
Mach2005
Thanks!
Just loaded the file provided by spoonfork, caused the phone to lock up for some reason but a reset got it going again - and I can now find my way home without using a torch!
Great help, thanks again.
Martin
I loaded the latest 6.03 TomTom6 and didn't have to bother with this patch. Was having trouble with the old tomtom6 i was running, just reseting my device randomly and running slow.
does it work for tom tom 5.21 ? I have the same problem too...
@mach2005
I tried to search but could you give specific clue... ?
sorry I am newbie.....
I have a problem with Quick GPS: It doesn´t update (I tried activesync, Wifi, 3G,...): "Connection error. Try again later"
any solution?
Thanks
Carolan said:
I have a problem with Quick GPS: It doesn´t update (I tried activesync, Wifi, 3G,...): "Connection error. Try again later"
any solution?
Thanks
Click to expand...
Click to collapse
The same for me!!!! (since a few days)
I'm waiting for a solution too....
THX
Solution that worked for me
You can load and run again the original cab attached here.
You can do it from your sd but remember to install it on the device. Soft reset and ...done!
milpap said:
You can load and run again the original cab attached here.
You can do it from your sd but remember to install it on the device. Soft reset and ...done!
Click to expand...
Click to collapse
Thanks for the tips. Unfortunately I can't install this Cab on my Polaris because the system inform me that this application isn't signed.
Any tips to bypass this problem ?
Thanks in advance
Try to install it when Polaris is not connected with pc.
milpap said:
Try to install it when Polaris is not connected with pc.
Click to expand...
Click to collapse
It is exactly what I've do (before reading your answer ;-) ).
It run perfectly (after a restart of the Polaris).
Thanks for the tip!
Unbelievable milpap!!!
It's work for me too...!!!
I have killed the process just before installing the cab, soft reset, and it's working now!
But where was the problem???
From Spain, thank you very much !!!, milpap
Works for me too
Fix using Registry
[HKEY_LOCAL_MACHINE\Software\HTC\QuickGPS]
"RemindTime"="02151010034724"
"Bias"=dword:fffffed4
"ExpiredTime"=dword:00002760
"folder"="\Windows\"
"region"="GB"
"INIDate"="20060531"
"remind"=dword:00000001
"actSync"=dword:00000001
"auto"=dword:00000000
"NotifyID"=dword:00001960
"INIFile"=""
"path"=""
"EEFile"="xtra.bin"
"curRegion"=dword:00000000
"curIP"=dword:00000000
"pwd"="1"
"authname"="1"
These registry settings will also correct the issue...
thanks
It worked, thank you very much!!!!!
Now workin`
Hey Guys!
After i read the post and updatetd my xda the QuickGPS Update runs like never before!
The O2 Germany Support was unable to fix my prob, so thanks to the Forum!!
Quick GPS
Same problem here, it works again, thanks!
Am i special?
Hey Guys...
I updateted the htc_quickgps.cab and restartet my device.
After one day the update ended with the old errormessage.
I dont know the reason, does anybody else?
best regards
Frank
btw:
I cant see any difference in the reg.-settings so i dont change anything
Quick GPS
Thanks a lot! I had the same problem and this solved it.
Hi,
I also had major problems with my QuickGPS (using a Polaris, which seems to be a little special in this concern).
After many days of research and finally a lucky hit at htc customer support I can tell you this:
You have to install some sort of navigation software, install a map, activate and soft reset before using quick gps the first time. if you dont, you screw up the registry and will always have problems with qgps!!
maybe some hints are helpful (they werren't for me), but I would not want to reinstall or change registry settings all the time.
Reason: The navigation software sets up qgps for its needs. qgps seems to be by far more than a simple download manager for ephemeris data. if you dont have a working navigation software, quick gps will start going wild
In case you will have problems later on: try uninstalling tomtom - soft reset - installl - soft reset and press thumbs
maybe a regular backup can help as well, we will see.
Wish you best of luck...
Thanks for cab, it works for me too !!
Mulb
Only Bepe 0.67 fixed it for me
Hey Guys!
I flashed my Device with Bepes 0.67 and now the update is running witout any problems.
Once again thxs to bepe!
Frank
There's a very easy fix which works for me. I see this problem from time to time on my device too. I am still unable to trace the "bad" software which replaces this registry key!
Just import the attached registry file every time you see the problem is back
Dmitry N said:
There's a very easy fix which works for me. I see this problem from time to time on my device too. I am still unable to trace the "bad" software which replaces this registry key!
Just import the attached registry file every time you see the problem is back
Click to expand...
Click to collapse
Thank you so much for this registery file...My problem was its update was only good for 1 day & 21 hours...It seemed strange to me & believe me I've tried everything & still didn't work right...Now with this registery file, update is good for 6 days....
at me this mistake. he managed to repair it. I say thank you for it
Since I posted a thread: http://forum.xda-developers.com/showthread.php?t=675311 and nobody could help me. I spent the past 5 days trying to get it to work and did it successfully (through haret).
Here's how to did it:
1. Download this .RAR I put together that includes:
-Eclair
-haret
-default.txt
2. Edit the "mddi.width=320 mddi.height=480" part of the "default.txt" to your needs. (either 320/480 or 240/320)
3. Put the content of the folder "android-orbit2-eclair" to the root of your SD card so it should be something like this:
Code:
-(D:) SD Card [COLOR="Red"](root)[/COLOR]
--conf
--media
--default.txt
--haret.exe
--initrd.gz
--rootfs.img
--system.sqsh
--zImage
4. Navigate to the SD Card (start>programs>file explorer>storage card) and click on the "haret.exe"
5. Once that has loaded up click "run" (about 3 lines down on right side)
6. Just wait, Give it chance to do its thing and simple... Android running on your XDA orbit 2.
any problems, reply to this thread and I will try to fix.
Thanks, James
it dosent work on my htc touch cruise.
I click on Run, and the screen becomes gradually black, and that finished as that… nothing any more occurs.
The screen is lit, but is black, and nothing occurs.
New problem now: I have the same message than you :
Code:
sh:2: unknown operand
losetup: /dev/block/loop 1: No such file or directory
Failed
Failed to reach system.img on SD card.
Whats the problem ?
nico85 said:
it dosent work on my htc touch cruise.
Click to expand...
Click to collapse
If you read the title it says for XDA orbit 2 not touch cruise.
Have you managed to get gprs/3g working with this? I can't seem to get mobile web working on my XDA Orbit II
I dont know whart u are doing here.
But i can use myns donut and eclair totally easy without modding something.
I just have to use the right "default.txt"...
Most packages you find here habe a "default-polaris.txt" in it or you use the one form myn ... It works great for the orbit 2 too
.....
But maby i dont get what you are doing here.. some special build or something?
BUt running android on orbit 2 is net a problem at all just use right conf.
-----------------------
@moondemon
Wifi works with myns eclair and donut. There are fixes (androidupdate.tar) you have to use (nomorootfs)
could u tell me which version have u installed? 1.6?
I succeeded installing the 1.6 version. but when I was trying installing the latest version, I was stucked at the screen which requires me to long-push the dpad center button. I did it but didnt work. I've even tried every keys, still didnt work.
could u give me a hand on it?
I have tried myn's and default-polaris does not work on my xda orbit 2. Also when I do get haret to run I have had trouble actually getting android to boot due to a continual "power wakeup" message. The default-polaris results in a flashing white screen for me. This config is the only config that actually works on my orbit 2.
Hello, i am just a newbie on Android for Polaris, so plz forgive me dump postings At the moment i am a bit spacy what i have to put together to work Android on my XDA2.
android-orbit2-eclair works on my XDA2 after installing but:
phone can't do outgoing calls:
3G can`t connect,
Cam/Gallery crashes
Wifi works.
Touchscreen works and all the rest.
before i installed the recent builds of froyo and eclair
System shows 10-15 min nice boot flash, then it works, but touch screen doesn`t work.
Anyway all the developers doing a great job here!
rgds Matthias
Im not using sd haret anymore. If you try with nand flash (http://forum.xda-developers.com/showthread.php?t=636024) everything works like a charm.
But as i used haret on my Orbit2 i was good with the package myn offered in her donut(or eclair im not sure).
In the package were a default.txt and a one for polaris/Orbit. I changed the polaris one to default (renaming) and it worked.
I think it was the donut package and it worked with zimages for eclair too.
Try this package if it works its worth a attemp to look into the default txt for other builds.
But atm i would suggest to give android at flash a try. Its almost perfekt for daily use if you not to much with some special programms on winmo.
As far as i read there are problems with haret atm gernerally that programms close even if install is fine.
Seems that flashing is the solution to all my problems, but
can you try to explain what makes the difference between haret and a NAND flash install relatet to the runing system?
Unfortunaley my XDA Obit2 is the carrier of my beloved navigation software. The other Wimo apps are junk compared with android. If there is a offline solution for Car Navigation on android, i could kick Wimo into the trash bin. Also i am a Linux user as well on my PC
Camera and astro application not working
Camera and astro application not working .. please help ...
xda orbit 2
I stuck these sections of
I've tried it and it seems it works, but I have a few questions and one major problem:
1. I installed the systems without the SIM card. When I started it again with SIM card, system says that the PIN I type is wrong altough I know that it's correct. How to solve it? Maybe it is so because I'm not O2 customer?
2. Is it possible to boot Android automatically without flashing NAND?
3. Can I theoretically Install Donut or Froyo using this method simply by putting different Zimage in the folder?
4. Do I have to perform another installation in case of buying a battery of more capacity? I saw that default.txt contains information about the battery.
5. May it work well If I change default.txt to the one prepared by atools?
Thanks for advance and greetings.
Double post, sorry.
running on my pola 200 / orbit2 but very slow i think my sd slow too
cingibi said:
running on my pola 200 / orbit2 but very slow i think my sd slow too
Click to expand...
Click to collapse
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
http://www.4shared.com/file/01Vco3iR/O2_orbit_2_panel_3_HARET_based.html
Click to expand...
Click to collapse
denis__at said:
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
Click to expand...
Click to collapse
Doesnt work for me ive left it about 20 mins and its still just a black screen. The first 1 worked but was slow.
hello, which rom is the best for o2 xda orbit 2 pola 200?