Database Info

HTC Sensation not turning on :'(

Hello!
I have an HTC Sensation which is not turning on just staying on Logo. Bootloader is working. I wanted to factory reset the mobile, but when i factory reseted it, its not turning on.
Bootloader is Unlocked
s-on
HBOOT-1.27.0000
please help me Thanks

newbie80 said:
Hello!
I have an HTC Sensation which is not turning on just staying on Logo. Bootloader is working. I wanted to factory reset the mobile, but when i factory reseted it, its not turning on.
Bootloader is Unlocked
s-on
HBOOT-1.27.0000
please help me Thanks
Click to expand...
Click to collapse
I have the same problem.It happened after I flashed Sebastian's ROM, Revelation, 2 days ago.
My phone is in the same state, Unlocked and S-ON, HBOOT 1.27 . Since it's S-ON I always enable SmartFlash in 4EXT every time I want to flash a new ROM, and the same I did when I flashed Revelation, 2 days ago, but something went wrong and now I'm stuck at splash screen; it shows up for 5 seconds, then turns black, splash screen again and so on.
I can't even restore my nandroid that I did right before flashing Revelation.

newbie80 said:
Hello!
I have an HTC Sensation which is not turning on just staying on Logo. Bootloader is working. I wanted to factory reset the mobile, but when i factory reseted it, its not turning on.
Bootloader is Unlocked
s-on
HBOOT-1.27.0000
please help me Thanks
Click to expand...
Click to collapse
if you are using 4ext recovery do this
format all partitions except sdcard
enable smartflash
flash the rom
otherwise flash the boot.img of the rom manually

rzr86 said:
if you are using 4ext recovery do this
format all partitions except sdcard
enable smartflash
flash the rom
otherwise flash the boot.img of the rom manually
Click to expand...
Click to collapse
My recovery is also not working. When i open recovery it stays at logo again

newbie80 said:
My recovery is also not working. When i open recovery it stays at logo again
Click to expand...
Click to collapse
reflash the recovery again
see how it goes

rzr86 said:
reflash the recovery again
see how it goes
Click to expand...
Click to collapse
Now i have reflashed the recovery but it is (recovery-clockwork-touch-5.8.0.9-pyramid). I reflashed it because i couldnt find any 4ext recovery with s-on. Can you please tell me what to do next?

newbie80 said:
Now i have reflashed the recovery but it is (recovery-clockwork-touch-5.8.0.9-pyramid). I reflashed it because i couldnt find any 4ext recovery with s-on. Can you please tell me what to do next?
Click to expand...
Click to collapse
Get 4ext recovery from here http://forum.xda-developers.com/showthread.php?t=1631861. It will be more helpful if you're flashing roms s-on.
Happy to help.

Far_SighT said:
Get 4ext recovery from here http://forum.xda-developers.com/showthread.php?t=1631861. It will be more helpful if you're flashing roms s-on.
Happy to help.
Click to expand...
Click to collapse
So now i flashed 4ext but when i enable 4EXT smartflash and reboot it still stays at Logo

newbie80 said:
So now i flashed 4ext but when i enable 4EXT smartflash and reboot it still stays at Logo
Click to expand...
Click to collapse
Did u relfash the rom from 4ext?
And note that first boot of any rom can take upto 10 mins. Be patient.

Far_SighT said:
Did u relfash the rom from 4ext?
And note that first boot of any rom can take upto 10 mins. Be patient.
Click to expand...
Click to collapse
Yup i reflashed ViperS 3.0.0... and wanted to turn on but it still stays at Logo
Maybe i need some other rom to flash?

newbie80 said:
Yup i reflashed ViperS 3.0.0... and wanted to turn on but it still stays at Logo
Maybe i need some other rom to flash?
Click to expand...
Click to collapse
Do a full wipe except sdcard and then reflash. Post the results.
And before flash got to options (4ext recovery) and ensure smartflash is on.
This will work just fine (note: ViperS 3.1.0 available OTA).

Far_SighT said:
Do a full wipe except sdcard and then reflash. Post the results.
And before flash got to options (4ext recovery) and ensure smartflash is on.
This will work just fine (note: ViperS 3.1.0 available OTA).
Click to expand...
Click to collapse
Yea i did a full wipe many times and flashed again but still staying at logo
I also tried to to boot with smartflash enabled but didn't work.

newbie80 said:
Yea i did a full wipe many times and flashed again but still staying at logo
I also tried to to boot with smartflash enabled but didn't work.
Click to expand...
Click to collapse
Just to be sure, ensure:
You are htcdev unlocked s-on
You have 3.32/3.33 firmware (check using fastboot getvar version-main)
You chose full wipe except sdcard from 4ext recovery
At least wait 10 mins!!!
SmartFlash is on before flash
Don't choose CPU freq above 1782 in installation (dont overclock gpu too much either)
If you are still stuck, manually flash boot.img and see what happens.
This should work. Other wise try another rom (say, ViperS 3.1.0).

Far_SighT said:
Just to be sure, ensure:
You are htcdev unlocked s-on
You have 3.32/3.33 firmware (check using fastboot getvar version-main)
You chose full wipe except sdcard from 4ext recovery
At least wait 10 mins!!!
SmartFlash is on before flash
Don't choose CPU freq above 1782 in installation (dont overclock gpu too much either)
If you are still stuck, manually flash boot.img and see what happens.
This should work. Other wise try another rom (say, ViperS 3.1.0).
Click to expand...
Click to collapse
Well i tried but didn't worked

newbie80 said:
Well i tried but didn't worked
Click to expand...
Click to collapse
Check the md5 sum if that isnt the problem flash the boot image in fastboot mode.
If that doesn't work just try to s-off its better to do that since it gives you less headaches.

newbie80 said:
Well i tried but didn't worked
Click to expand...
Click to collapse
try to flash the stock rom and see how it goes
EfrainTrejo said:
Check the md5 sum if that isnt the problem flash the boot image in fastboot mode.
If that doesn't work just try to s-off its better to do that since it gives you less headaches.
Click to expand...
Click to collapse
he can't use S-OFF method because the device is not in a working condition

rzr86 said:
try to flash the stock rom and see how it goes
Click to expand...
Click to collapse
If this doesn't work either, it could be bad partition. Then (only as a last resort) do an ruu. That should definately fix your phone.
Happy to help.

Far_SighT said:
If this doesn't work either, it could be bad partition. Then (only as a last resort) do an ruu. That should definately fix your phone.
Happy to help.
Click to expand...
Click to collapse
indeed only ruu is left

[Q] HTC One X doesn't work, error 7 on setup any(!) ROM

Posted my topic to incorrect thread and don't know how to move it, so re-post my question here.
Default [Q] HTC One X doesn't work, error 7 on setup any(!) ROM
Device: HTC One X AT&T USA, Android 4.0.4
HBoot 1.14 (unlocked), S-ON, cid: 11111111 (was CWS__001), rooted (CWM-SuperSU-v0.96)
Hi,
I have sim-unlocked AT&T HTC One X that I bought in USA last year and used it in 'as is' condition. A week ago it got to cyclical reboot. I made factory reset, but of course I lost all my data. In this case I decided to upgrade HBoot and setup latest CyanogenMod (yeap, I thought I have nothing to lose ).
I re-wrote cid to supercid, unlocked flashboot, rooted the phone... but made a mistake and flashed CyanogenMod boot.img before upgraded Hboot *facepalm*.
And now it's unable to load android (it just shows HTC logo with red warning text).
Of course, I tried to restore original Boot from backup, but this didn't help.
I'm able to open Bootloader and custom recovery menu (recovery-clockwork-6.0.3.1-evita.img), but unable to install any ROM (tried to use ROMs that are based on ICS, because my Hboot 1.14) - it always returns me error 7, even if all requirements are met. Tried to remove asserts from updater-script , but in this case it just shows 'Opening update package... Installing update... Installation aborted.'
I tried almost all that I found in web, used different backups and ROMs, but nothing helped.
I also tried to flash stock RUU (european, since I didn't find USA version - btw does it matter?) , but it getting Error 132 - Signature error.
Please could somebody help me to return my phone to a working state? Any advices are truly appreciated!
P.S. Unfortunately on one of the steps I lost my original backup (sdcard was formatted).
Thanks.
Click to expand...
Click to collapse
UPDATE:
I thought that since I have supercid I can use any RUU, but seems like I should use RUU exactly for CWS__001 or based on this thread I should make my phone S-Off and install any RUU. I cannot find any RUU for r CWS__001 in web, so if S-Off really helps, could you please advise correct RUU for my phone?
Thank you in advance!

Have you tried flashing a different recovery? It might help. Download TWRP 2.6 from here. Put it in your fastboot folder, connect your phone, open command prompt from within fastboot folder, issue following commands:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
fastboot erase cache
fastboot reboot-bootloader
Now enter recovery and try to install your ROM again. Post results here.
Sent from my Evita
---------- Post added at 10:35 PM ---------- Previous post was at 10:34 PM ----------
PS. do not use an RUU while you have SuperCID and s-on, it will brick your phone. Try my above instructions first.
Sent from my Evita

timmaaa said:
Have you tried flashing a different recovery? It might help. Download TWRP 2.6 from here. Put it in your fastboot folder, connect your phone, open command prompt from within fastboot folder, issue following commands:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
fastboot erase cache
fastboot reboot-bootloader
Now enter recovery and try to install your ROM again. Post results here.
Sent from my Evita
---------- Post added at 10:35 PM ---------- Previous post was at 10:34 PM ----------
PS. do not use an RUU while you have SuperCID and s-on, it will brick your phone. Try my above instructions first.
Sent from my Evita
Click to expand...
Click to collapse
This recovery seems pretty good, thank you!
And it looks like I understand why all ROMs gets me Error 7: all of them are for Endeavor, but my phone is Evita, isn't it?
I made all that you wrote:
fastboot flash recovery openrecovery-twrp-2.6.0.0-evita.img
fastboot erase cache
fastboot reboot-bootloader​
Also I found this ROM (MIUIandroid 3.2.22 for the EVITA version of the HTC One X/L) and ran installation from recovery. And there are no Error 7! :victory: (of course I also flashed boot - fastboot flash boot boot.img)
The instruction for this ROM also says "Install gapps; Wipe Cache and Dalvik Cache". I installed gapps (MIUI.us_evita_v4_3.1.25_Eng_mirG.zip)
BUT unable to wipe Cache and Dalvik Cache: currently my phone says "Unable to mount '/cache' and '/data'".
How can I fix this?
Oh! And thank you for warn me about RUU installation!

Sigord said:
This recovery seems pretty good, thank you!
And it looks like I understand why all ROMs gets me Error 7: all of them are for Endeavor, but my phone is Evita, isn't it?
I made all that you wrote:
fastboot flash recovery openrecovery-twrp-2.6.0.0-evita.img
fastboot erase cache
fastboot reboot-bootloader​
Also I found this ROM (MIUIandroid 3.2.22 for the EVITA version of the HTC One X/L) and ran installation from recovery. And there are no Error 7! :victory: (of course I also flashed boot - fastboot flash boot boot.img)
The instruction for this ROM also says "Install gapps; Wipe Cache and Dalvik Cache". I installed gapps (MIUI.us_evita_v4_3.1.25_Eng_mirG.zip)
BUT unable to wipe Cache and Dalvik Cache: currently my phone says "Unable to mount '/cache' and '/data'".
How can I fix this?
Oh! And thank you for warn me about RUU installation!
Click to expand...
Click to collapse
Holy crap you are so lucky you didn't brick your phone by flashing those Endeavoru ROMs. Yes, you have an Evita, it'll say that at the top of your bootloader. Don't ever flash Endeavoru ROMs again, you could brick. Only ever download your ROMs from our forum, go here for Sense ROMs or here for aosp ROMs. Don't ever download from any other forum or any other site.
I'm honestly not sure why it can't mount cache/dalvik cache though. Did you use the advanced wipe feature?
Sent from my Evita

timmaaa said:
Holy crap you are so lucky you didn't brick your phone by flashing those Endeavoru ROMs. Yes, you have an Evita, it'll say that at the top of your bootloader. Don't ever flash Endeavoru ROMs again, you could brick. Only ever download your ROMs from our forum, go here for Sense ROMs or here for aosp ROMs. Don't ever download from any other forum or any other site.
I'm honestly not sure why it can't mount cache/dalvik cache though. Did you use the advanced wipe feature?
Sent from my Evita
Click to expand...
Click to collapse
Yes, I used 'Wipe cache/Dalvik' button after installation and additionally 'Advanced wipe > Dalvik cache, Cache'.
After gaps installation it shows only "E:Unable to mount '/data'"

So the gapps installation failed?
Sent from my Evita

timmaaa said:
So the gapps installation failed?
Sent from my Evita
Click to expand...
Click to collapse
Installation says "Successful" but it shows "E:Unable to mount '/data'" in logs.
Also I'm getting the same issue when trying to wipe dalvik cache and cache.

It sounds like the recovery is needing a valid /data partition before it will let you flash.
Sent from my HTC One X using xda premium

Venomtester said:
It sounds like the recovery is needing a valid /data partition before it will let you flash.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Now on loading the phone displays colored X like in Nexus but it doesn't load (of course).
How can I set a valid /data partition?

Sigord said:
Yes, I used 'Wipe cache/Dalvik' button after installation and additionally 'Advanced wipe > Dalvik cache, Cache'.
After gaps installation it shows only "E:Unable to mount '/data'"
Click to expand...
Click to collapse
Try to manually mount it by clicking the second button from the bottom left and checking everything then reflash
You may not be able to check it
-Sugardaddy

Arrow44 said:
Try to manually mount it by clicking the second button from the bottom left and checking everything then reflash
You may not be able to check it
-Sugardaddy
Click to expand...
Click to collapse
Unfortunately I'm able to check Cache, sdcard and System in Mount menu, but not Data.

You could try formatting your sd card. Backup any important data first obviously.
Sent from my Evita

timmaaa said:
You could try formatting your sd card. Backup any important data first obviously.
Sent from my Evita
Click to expand...
Click to collapse
I formatted the sd card, but all the same unable to mount \data.
I also tried to re-install my ROM zip and gapps zip but this didn't help.

Did a factory reset through TWRP, it mounted \data and now my phone is alive!
Thank you guys for all your help!!!

Ok good. Just a note: before flashing a ROM, always wipe cache/dalvik cache/factory reset/system.
Sent from my Evita

timmaaa said:
Ok good. Just a note: before flashing a ROM, always wipe cache/dalvik cache/factory reset/system.
Sent from my Evita
Click to expand...
Click to collapse
Thank you!
And just to be sure, what are my future steps if I want to flash any ROM on Android 4.2 or higher (For example, CM 10.1)?
Could you please take a look on the steps below and tell me if I missed something or understood wrong?
1. Do S-OFF based on [S-Off] Facepalm S-Off for HTC One XL
2. Load in fastboot mode and re-lock fastboot (fastboot oem lock)
3. Go to recovery and do full wipe
4. Update to 3.18 RUU by running its .exe.
If I understand correctly, this should upgrade my HBoot and Radio and get me official HTC ROM with JB 4.1.1 (is this safely with SuperCID and S-OFF?)
6. Unlock bootloader (fastboot flash unlocktoken Unlock_code.bin)
5. Downgrade touchscreen firmware.
6. Download last stable version of CM and the appropriate gapps and push it to sdcard
7. Go to recovery and create a backup
8. Do a full wipe
9. Install CM zip from sdcard
10. Install gapps
11. Flash boot (fastboot flash boot boot.img)
Thank you in advance!
PS: Probably you can advise me any other stable ROM?

Sigord said:
Thank you!
And just to be sure, what are my future steps if I want to flash any ROM on Android 4.2 or higher (For example, CM 10.1)?
Could you please take a look on the steps below and tell me if I missed something or understood wrong?
1. Do S-OFF based on [S-Off] Facepalm S-Off for HTC One XL
2. Load in fastboot mode and re-lock fastboot (fastboot oem lock)
3. Go to recovery and do full wipe
4. Update to 3.18 RUU by running its .exe.
If I understand correctly, this should upgrade my HBoot and Radio and get me official HTC ROM with JB 4.1.1 (is this safely with SuperCID and S-OFF?)
6. Unlock bootloader (fastboot flash unlocktoken Unlock_code.bin)
5. Downgrade touchscreen firmware.
6. Download last stable version of CM and the appropriate gapps and push it to sdcard
7. Go to recovery and create a backup
8. Do a full wipe
9. Install CM zip from sdcard
10. Install gapps
11. Flash boot (fastboot flash boot boot.img)
Thank you in advance!
PS: Probably you can advise me any other stable ROM?
Click to expand...
Click to collapse
You've done very well but if you get s-off first you can actually forget some of those steps. Follow the below steps.
1. Do S-OFF based on [S-Off] Facepalm S-Off for HTC One XL
2. Update to 3.18 RUU by running its exe file. This will update your phone to 2.14 hboot, and stock at&t ROM, and stock recovery. Safe to run with SuperCID as long as you s-off first.
3. Flash TWRP 2.6 again as detailed earlier.
4. Go into recovery and create a backup.
8. Do a full wipe
9. Install ROM zip from sdcard.
10. Install appropriate gapps.
Because you'll have s-off first, you don't need to relock your bootloader before the RUU. You will also not have to flash the boot.img from fastboot anymore. Part of the beauty of having s-off.
I can't really advise any ROMs. It's against the rules to ask which ROM is best/favorite/most stable, therefore I can't really answer that question. I'd just suggest having a look at a few ROMs, checking out any bugs that are noted in the first few posts, and reading some user connects to get an idea of what's working and what's not.
Sent from my Evita

timmaaa, thank you so much!
Currently I've flashed CM 10.0 (last stable), but when I'll be ready to S-OFF I'll follow your steps.
Thank you once again for your help!

No problems at all, you're welcome.
PS. If someone helps you on here, push the thanks button.
Sent from my Evita

[HELP]

Hi, need help with viper 5.0.0, after flashing rom, (of course before flashing i have format everything) it boots normally but after i got a message : "unfortunately the process com.android.phone has stopped" ... how to fix it ?
i was fixing permissions, reflashing, formatting ...
help me please

pangapz said:
Hi, need help with viper 5.0.0, after flashing rom, (of course before flashing i have format everything) it boots normally but after i got a message : "unfortunately the process com.android.phone has stopped" ... how to fix it ?
i was fixing permissions, reflashing, formatting ...
help me please
Click to expand...
Click to collapse
what recovery do you have?

4ext recovery

pangapz said:
4ext recovery
Click to expand...
Click to collapse
the only thing i can tell you is download the latest version of 4ext and then flash again the rom
otherwise redownload the rom

i have redownload rom, updated recovery and nothing helps what else can i do ?

pangapz said:
i have redownload rom, updated recovery and nothing helps what else can i do ?
Click to expand...
Click to collapse
try to wipe dalvik + cache from recovery

i was whiping everything already ... its the first time when i have that error since i have my first htc g1

pangapz said:
i was whiping everything already ... its the first time when i have that error since i have my first htc g1
Click to expand...
Click to collapse
format your sdcard or flash it with a different one

damn... the same problem after flashing from fresh sdcard
have no idea what can slove it ... someone writes that reflashing boot.img can help but how

pangapz said:
damn... the same problem after flashing from fresh sdcard
have no idea what can slove it ... someone writes that reflashing boot.img can help but how
Click to expand...
Click to collapse
the command is fastboot flash boot boot.img
connect the device in your pc and put it in fastboot mode
put the boot.img of the rom in your adb and fastboot folder
in that folder open a cmd and type the command i wrote above

yea, i know those commands but i dont know which boot.img shall i download

pangapz said:
yea, i know those commands but i dont know which boot.img shall i download
Click to expand...
Click to collapse
The boot.img is located inside the rom zip
A lovely thing about Christmas is that it's compulsory, like a thunderstorm, and we all go through it together.
Garrison Keillor

shi** it doesnt work is there any way to replace that process (dialer/phone) ? maybe this will fix my problem
phyramide is working fine without simcard or in a airplane mode
EDIT:
all vipers rooms on my phyramide have the same problem all the time maybe firmware can be bad ?

pangapz said:
shi** it doesnt work is there any way to replace that process (dialer/phone) ? maybe this will fix my problem
phyramide is working fine without simcard or in a airplane mode
EDIT:
all vipers rooms on my phyramide have the same problem all the time maybe firmware can be bad ?
Click to expand...
Click to collapse
are you on S-OFF?

yes, im s-off
EDIT:
*** UNLOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot

pangapz said:
yes, im s-off
EDIT:
*** UNLOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Click to expand...
Click to collapse
ok then
flash 3.33 universal from this thread
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)

i have change firmware and it doesnt help ;/ all time the same crash ...

pangapz said:
i have change firmware and it doesnt help ;/ all time the same crash ...
Click to expand...
Click to collapse
did you try other roms except vipers's one?

yep, other roms works fine, only the vipers have problem
few weeks ago i have a vipers room and it works corectly then i have to flash stock rom (RUU). after that i want to flash vipers rom again and i have that crash ... its annoying...

pangapz said:
yep, other roms works fine, only the vipers have problem
few weeks ago i have a vipers room and it works corectly then i have to flash stock rom (RUU). after that i want to flash vipers rom again and i have that crash ... its annoying...
Click to expand...
Click to collapse
give it a try again
flash a ruu.exe and then come back for any viperS rom
note: no need to return to S-ON

Please help urgent my Phone is stuck in a bootloop and i cant fix it!!!

Hello please help I have the HTC Sensation Xe and my phone is stcuk in a bootloop.
my phone details
PYRAMID PVT SHIP S-ON RL
HBOOT-1.29.0000
EMMC-BOOT
MAR 2 2012,18:14:34
I have 4EXT recovery. when i went to flash a rom it went into a bootloop before i flashed the rom i wiped cash and dalvik cash i also wiped data and formatted all partitions except sd card i then enabled smart flash. I have tried to flash other roms with no luck i have also tried to recover an old backup but that isn't working. Please Help.

REALMZY said:
Hello please help I have the HTC Sensation Xe and my phone is stcuk in a bootloop.
my phone details
PYRAMID PVT SHIP S-ON RL
HBOOT-1.29.0000
EMMC-BOOT
MAR 2 2012,18:14:34
I have 4EXT recovery. when i went to flash a rom it went into a bootloop before i flashed the rom i wiped cash and dalvik cash i also wiped data and formatted all partitions except sd card i then enabled smart flash. I have tried to flash other roms with no luck i have also tried to recover an old backup but that isn't working. Please Help.
Click to expand...
Click to collapse
which rom did you try to flash?
also enable smartflash exactly before flashing the new rom

rzr86 said:
which rom did you try to flash?
also enable smartflash exactly before flashing the new rom
Click to expand...
Click to collapse
i tried to flash CM 11 KitKat the Albino one. i have tried enabling smartflash and then installing the rom but i have had no luck i have tried to flash other roms and it still isnt working i keep getting a bootloop with the htc logo on it.

REALMZY said:
i tried to flash CM 11 KitKat the Albino one. i have tried enabling smartflash and then installing the rom but i have had no luck i have tried to flash other roms and it still isnt working i keep getting a bootloop with the htc logo on it.
Click to expand...
Click to collapse
make sure you have latest 4ext recovery 1.0.0.6 RC1 and now after smart flash try to flash the boot.img from pc here is guide http://forum.xda-developers.com/showthread.php?t=1631861 Extra 1: Flashing "boot.img"

Mile_zdr said:
make sure you have latest 4ext recovery 1.0.0.6 RC1 and now after smart flash try to flash the boot.img from pc here is guide http://forum.xda-developers.com/showthread.php?t=1631861 Extra 1: Flashing "boot.img"
Click to expand...
Click to collapse
ok i will try it now but since im a noob it may take awhile

Mile_zdr said:
make sure you have latest 4ext recovery 1.0.0.6 RC1 and now after smart flash try to flash the boot.img from pc here is guide http://forum.xda-developers.com/showthread.php?t=1631861 Extra 1: Flashing "boot.img"
Click to expand...
Click to collapse
i cant control my phone in adb it says there is no devices connected please help

REALMZY said:
i cant control my phone in adb it says there is no devices connected please help
Click to expand...
Click to collapse
You booted into bootloader? Make sure you use fastboot and not adb command.

Sajito said:
You booted into bootloader? Make sure you use fastboot and not adb command.
Click to expand...
Click to collapse
yes i am in bootloader when i click on fastboot it just closes it self

Sajito said:
You booted into bootloader? Make sure you use fastboot and not adb command.
Click to expand...
Click to collapse
how do i use fastboot? on my phone it says FASTBOOT USB

Mile_zdr said:
make sure you have latest 4ext recovery 1.0.0.6 RC1 and now after smart flash try to flash the boot.img from pc here is guide http://forum.xda-developers.com/showthread.php?t=1631861 Extra 1: Flashing "boot.img"
Click to expand...
Click to collapse
i cant find a kernel file but i can find the boot.img file should i just go ahead and flash this?

REALMZY said:
i cant find a kernel file but i can find the boot.img file should i just go ahead and flash this?
Click to expand...
Click to collapse
YESSSSSSSSSS Thank you soooooooooo much it has been fixed

Well seems like you found out. :good:

[q] cant find ruu

PLS HELP ME
need RUU for HTC SENSATION z710e SK Telecom
SK_911

nommiekhawaja said:
PLS HELP ME
need RUU for HTC SENSATION z710e SK Telecom
SK_911
Click to expand...
Click to collapse
see here
http://www.tsar3000.com/Joomla/inde...riginal-roms&catid=65:htc-downloads&Itemid=98

My HBOOT 1.27.0000
RUU giving ERROR..
is there any way to change SUPERCID without S-OFF
i read somewhere with supercid 11111111 u can use any RUU but that requied S-OFF....
pls HELP

nommiekhawaja said:
My HBOOT 1.27.0000
RUU giving ERROR..
Click to expand...
Click to collapse
if you are on S-ON you can't downgrade
and AFAIK there is no ics ruu for your region
S-OFF the device and then you can downgrade

My phone wont turn ON it show HTC logo then blank screen...

nommiekhawaja said:
My phone wont turn ON it show HTC logo then blank screen...
Click to expand...
Click to collapse
is your on S-ON or on S-OFF?

S-ON

nommiekhawaja said:
S-ON
Click to expand...
Click to collapse
you only option is to S-OFF the device
by the way why don't you flash a custom rom from recovery?

I accidently flashed kernal using ViperKernalFlasher since then my phone wont turn ON it just shows HTC logo and then screen turns black
i have tried to flash custom rom http://forum.xda-developers.com/showthread.php?t=2699401 but that didnt helped either nor flashing back stock kernal which i found on net ....
So if u can help me flash some custom rom so i can atleast use phone it would be better then RUU

nommiekhawaja said:
I accidently flashed kernal using ViperKernalFlasher since then my phone wont turn ON it just shows HTC logo and then screen turns black
i have tried to flash custom rom http://forum.xda-developers.com/showthread.php?t=2699401 but that didnt helped either nor flashing back stock kernal which i found on net ....
So if u can help me flash some custom rom so i can atleast use phone it would be better then RUU
Click to expand...
Click to collapse
what recovery do you have?

4ext Recovery Touch
i am currently download few roms from XDA in hope that anyone might work..

nommiekhawaja said:
4ext Recovery Touch
i am currently download few roms from XDA in hope that anyone might work..
Click to expand...
Click to collapse
follow these steps
1)format all partitions except sdcard from 4ext recovery
2)enable smartflash from 4ext recovery
3)flash the rom
4)done

When i flashed http://forum.xda-developers.com/showthread.php?t=2699401
it said to do a standard full wipe
so in 4ext wipe | format option i wiped all the things
wipe data/factory reset
wipe cache
wipe cache + dalvik
wipe dalvik cache
wipe battery stats
format system
format data
format boot
format all partitions (except sdcard)
I HOPE THAT thats its not what causing custom rom to work .....

Flashed rom and it worked ....!!!!!!!!!!!!!!!!!!
Thanks buddy soo much !!!!!

nommiekhawaja said:
When i flashed http://forum.xda-developers.com/showthread.php?t=2699401
it said to do a standard full wipe
so in 4ext wipe | format option i wiped all the things
wipe data/factory reset
wipe cache
wipe cache + dalvik
wipe dalvik cache
wipe battery stats
format system
format data
format boot
format all partitions (except sdcard)
I HOPE THAT thats its not what causing custom rom to work .....
Click to expand...
Click to collapse
use the option i told you
if in the installation of the rom asks you for full wipe just don't do it since you have done already a full wipe