Database Info

SGH-i780 with US ATT Service (mms/3g)

hey guys
i was wondering if anyone in the US has got their i780 working perfectly with ATT service. i am unable to get 3g and also i am unable to receive MMS. well i recieve mms, but the message is blank. im wondering if there was any specific steps i need to take to have them activated. i searched all over, but all the solutions seem to be only for the UK and singapore. any help is appreciated. thanks.
also i am using a stock rom.

sgh-i617
i had to call att to get my phone working correctly, it was on their end. They have to set up their end to work with a pda.

mike c said:
i had to call att to get my phone working correctly, it was on their end. They have to set up their end to work with a pda.
Click to expand...
Click to collapse
did the rep give you any problems? when ic alled they claimed they didnt know the settings for it because it snot part of their supported phones.

bknewtype said:
did the rep give you any problems? when ic alled they claimed they didnt know the settings for it because it snot part of their supported phones.
Click to expand...
Click to collapse
Your ability to get 3g will depend on if the phone supports the frequency american 3g is on. A lot of foreign phones don't
I had a hard time getting to cell me a data package too for my phone since I bought it unlocked. The a holes act like "if its not ours we cant guarantee it will work!" then they wouldn't cell me a data package except the crappy medianet one (I should have been dishonest and taken it, would saved $15 a month for the same service). Called back, got a different rep, gave him the IMEI number, told him it was a PDA, went smoothly.

[Q] Lost My Phone...

I lost my damn G2X the other day while drunk and had just installed a new ROM and no tracking app yet. The guy at Tmobile today told that anyone could put their own SIM card in my phone if found and use it without a problem.
Can TMobile really not associate the IMEI off that phone (that I reported lost) with one that cannot be activated? I don't want to believe that and don't believe the fat slob at the store anyways due to how he bad he messed up my account today and failed to share important information with me

aburn95 said:
I lost my damn G2X the other day while drunk and had just installed a new ROM and no tracking app yet. The guy at Tmobile today told that anyone could put their own SIM card in my phone if found and use it without a problem.
Can TMobile really not associate the IMEI off that phone (that I reported lost) with one that cannot be activated? I don't want to believe that and don't believe the fat slob at the store anyways due to how he bad he messed up my account today and failed to share important information with me
Click to expand...
Click to collapse
Any T-Mobile sim card can work with any T-Mobile or Unlocked phone without the need of setting up a IMEI to that sim card. So yes they can just throw in there card and it will work. If you report your phone stolen then T-Mobile might be able to block the use of said IMEI from it's network. That is if you know what that number is and you ask about it over the phone. The first thing you should of done in this situation is called in your phone as stolen. Still it's possible they wont do that. I know I've seen comment for cell phone dealers on ebay who stated that the company sold them a stolen phone that is now deactivated. So best of luck. Also make sure you go to an actual corporate store. Not all T-Mobile stores are owned by T-Mobile. It's very hard to tell the difference between them.

Thanks I have the box it came in I think that has IMEI

its a gsm phone so they can't do anything, if it was a cdma then it won't work!

well crap. someones a lucky ************

If you are fast enough you log onto the Android Market on the internet and install Plan B. If they have not yanked out your sim yet plan b will install, automatically run, send an sms to you with the phone's location and allow you to track it online. You can also lock it and have it put a message on the phone to return it to the owner.

Jboxer is right, most probably the thief doesn't know as much to know that he can throw another sim card in there.
Best of luck though
Sent from my LG-P999 using xda premium

And it is not true that T-Mobile cannot block the IMEI. If you call T-Mobile and report it lost they will definitely block the IMEI from use on their network. Whoever found it or stole it won't be able to use it on T-Mobile but they would still be able to sim unlock it and use it on AT&T or another network.

Thanks everyone. I think it's all too late. I tried installing Wheres my Droid from net the next morning but it either needs to be set up on phone first (can't remember) or the phone had already died. Wish I knew about "Plan B." This succcccks. I really hope something goes wrong with it for the new owner, And sure hope they like a basic ass setup of MIUI!!!

NO SERvICE?

wondering if i can get any help around here. One day my sidekick suddenly stopped working. Meaning no signal or service of any. I can log onto wifi and still use the internet but i cant make text messages, calls, ect. I rooted it and flashed Glorious Overdose, but the problem is still there. I'm with tmobile and idk why this doesnt work. It reads the SIM card. because when i take it out it has that sign at the top of the screen saying "insert SIM". anyone know what i can do? i know its not my SIM card because it works with other phones. its something with this phone.
ok.. so the problem is.... i bought the phone off someone on craigslist. and the phone worked for 5 months. then it finallly locked up. ^^^^ so i called tmobile and they said that the person that i bought the phone off of did not pay for their first month's service so they blocked the phone from tmobile use. so i'm wondering is there anything i can do to make it work for tmobile.... if not. just unlock it and use it for tmobile?

xaznxb0ix said:
wondering if i can get any help around here. One day my sidekick suddenly stopped working. Meaning no signal or service of any. I can log onto wifi and still use the internet but i cant make text messages, calls, ect. I rooted it and flashed Glorious Overdose, but the problem is still there. I'm with tmobile and idk why this doesnt work. It reads the SIM card. because when i take it out it has that sign at the top of the screen saying "insert SIM". anyone know what i can do? i know its not my SIM card because it works with other phones. its something with this phone.
Click to expand...
Click to collapse
Your sim may be outdated. What other devices do you have? Is it a 4G Sim card?
Sent from my SPH-D710 using xda premium

AndroidBotx said:
Your sim may be outdated. What other devices do you have? Is it a 4G Sim card?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
the other phone i was switching over to was a 3g vibrant. And it was working with this SIM a few weeks ago. thats strange

Maybe. Somene esle is using another of ur sim cards becuase tmobile deactivaes the old ones
Sent from my SGH-T839 using XDA

xtrem88 said:
Maybe. Somene esle is using another of ur sim cards becuase tmobile deactivaes the old ones
Sent from my SGH-T839 using XDA
Click to expand...
Click to collapse
i was using this phone the whole time with a 3g SIM. And i never had a problem until now. it happened randomly

SIMs also tend to burn out/stop working, visit your local tmo store and ask them to take a look at your SIM, they should be able to tell, and if it's burnt out they'll give you a new one. Have you tried this SIM in another phone since it stopped working in this phone?

sduvick said:
SIMs also tend to burn out/stop working, visit your local tmo store and ask them to take a look at your SIM, they should be able to tell, and if it's burnt out they'll give you a new one. Have you tried this SIM in another phone since it stopped working in this phone?
Click to expand...
Click to collapse
yeah. ive used my sim on another phone and it works fine. I tried using my sisters sim card and her husband's and the sidekick still says no service. but on their phone it works fine as well. so its the phone. If i show them the phone wll they say anything though since its rooted.

Go or call tmob they will send a sim free
Sent from my HTC Sensation 4G using xda premium

bump/ was not a SIM issue.

hmm, when T-mobile told you that they blocked the phone from use because of the person's non-paid bill, did they say there was anything you could do to reinstate the phone on their network?

yogi2010 said:
hmm, when T-mobile told you that they blocked the phone from use because of the person's non-paid bill, did they say there was anything you could do to reinstate the phone on their network?
Click to expand...
Click to collapse
they said it was blocked from tmobile use until that first month bill is paid.
so that pretty much means wont be able to use ever huh?
i guess when the sk4 was a free phone they got it and resold it, but ended up not paying that bill.

xaznxb0ix said:
they said it was blocked from tmobile use until that first month bill is paid.
so that pretty much means wont be able to use ever huh?
i guess when the sk4 was a free phone they got it and resold it, but ended up not paying that bill.
Click to expand...
Click to collapse
yeah,that sucks, the person might have agreed to a contract just to get the phone for free, then turn around and sell it. whatever happened, it sounds like maybe the only way to use it on Tmobile is to pay the person's outstanding bill
do you have a contract with Tmo? the only other thing i can think of at the moment is unlocking the phone to work with another carrier, like Simple Mobile, or whatever carriers would activate it.
i am definitely not an expert on how these things work, just trying to throw out ideas. i had never really thought about this, i just knew that when a phone is reported stolen, the carrier can block the phone so it can't be used on their network. i bought a Sprint phone off CL once, and i made sure to call Sprint and check the esn # to make the sure the phone was valid or whatever.

yogi2010 said:
yeah,that sucks, the person might have agreed to a contract just to get the phone for free, then turn around and sell it. whatever happened, it sounds like maybe the only way to use it on Tmobile is to pay the person's outstanding bill
do you have a contract with Tmo? the only other thing i can think of at the moment is unlocking the phone to work with another carrier, like Simple Mobile, or whatever carriers would activate it.
i am definitely not an expert on how these things work, just trying to throw out ideas. i had never really thought about this, i just knew that when a phone is reported stolen, the carrier can block the phone so it can't be used on their network. i bought a Sprint phone off CL once, and i made sure to call Sprint and check the esn # to make the sure the phone was valid or whatever.
Click to expand...
Click to collapse
yeah but seeing that the phone is a SIM use, and the phone was working for 5 months till now, i didnt see it as an issue buying off craigslist at the point. I didnt know tmobile was able to block a phone. I mean i can see a reason to them blocking the sim card. But i guess i pretty much have a paper weight since i have a 2 year contract wiht tmobile.

xaznxb0ix said:
yeah but seeing that the phone is a SIM use, and the phone was working for 5 months till now, i didnt see it as an issue buying off craigslist at the point. I didnt know tmobile was able to block a phone. I mean i can see a reason to them blocking the sim card. But i guess i pretty much have a paper weight since i have a 2 year contract wiht tmobile.
Click to expand...
Click to collapse
i was thinking the same thing, that the block should be against the SIM, not the phone. i guess i would call Tmobile and try to reason with them, and see if they can let you use the damn thing!
hope you figure something out!

[Q] SIM Unlock Rooted and Custom Flashed Verizon SCH-i535 GS3? for MetroPCS

Hello whats up everyone, I'm in a need of help this evening!
After doing much heavy research i still have not been found a 100% concrete wat to unlock my verizon SGS3 so that i can use it with other sim cards such as MetroPCS or T-Mobile
I currently have it running EZ-Unlocked and rooted with CleanRom 4.1.2 when i put in a non verizon sim such as a non-activated T-Mobile card, it doesn't say "sorry, this SIM is not supported. please....." but says simply no service. Is my phone already SIM unlocked?
I also saw this handy method:http://www.youtube.com/watch?v=-cmiEZcw1z8
but when the NETWORK LOCK option came up..it just said NETWORK LOCK and no 3 options I could choose..hmmm
EDIT: heard that 4.1.1 HAS the option to get rid of the NETWORK LOCK option and this feature was apparently removed on purpose with 4.1.2? But i'm running CleanROM?
BTW: i've tried "galaxsim unlock" but it's not compatible with the US Variant yet.
MetroPCS will get my phone working on their network and do all the trickery...I just need to know if my phone is SIM unlocked.

BUMP: Look Guys, I've seen quite a few people view this with nothing to say...It's URGENT. i can't afford a new handset and verizon is cutting us off for good because my girlfriends cousin who was also on the plan that her mom was on the name for...went over on data twice. Her Cousin doesn't live with us but was on the plan...he was suppose to be grounded for going over the FIRST time but fooled his mom into giving her the MicroSD card and lied and said that was the SIM card. so he went over another month probably downloading porn and ****.
verizon said there is no rush to pay the overages....as we will not be turning back on service. We use our cell phones as the priority communication tool..no home phone....right now we have no provider. I need an answer please

stanleyopar2000 said:
BUMP: Look Guys, I've seen quite a few people view this with nothing to say...It's URGENT. i can't afford a new handset and verizon is cutting us off for good because my girlfriends cousin who was also on the plan that her mom was on the name for...went over on data twice. Her Cousin doesn't live with us but was on the plan...he was suppose to be grounded for going over the FIRST time but fooled his mom into giving her the MicroSD card and lied and said that was the SIM card. so he went over another month probably downloading porn and ****.
verizon said there is no rush to pay the overages....as we will not be turning back on service. We use our cell phones as the priority communication tool..no home phone....right now we have no provider. I need an answer please
Click to expand...
Click to collapse
Drag...

s3 frontier with att and s8 galaxy unlocked phone numbersync is a no go?

I spent over 2 hours last nite with att reps trying to enable numbersync to work between the s3 and s8 phones.. the s8 phone is an unlocked phone (not bought through att), only to find out today via another rep that the phone must be bought via ATT or truly att branded.. which i find a bit absurd, as i think others have succeeded..
Is this really the case.. anyone know or have this same experience?
Specifically this error would appear after going through the get started via the watch then on the phone (after creating a seperate accessid):
Oh darn! We can't enable device syncing on this phone. Want to find out more? Call us at 800.331.0500 so we can help.
(MSSITWINREL12)
If this turns out to really be an unlocked phone issue (which is a bit ridiculous), i think i read that it might be possible to take my sim card out of that phone and put in another phone that is att branded, enable number sync then put the card back in my s8 and go from there
Thanks

The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.

pasco8525 said:
The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.
Click to expand...
Click to collapse
Thanks for the reply.. your saying you had an unlocked tmobile phone on att and it was working till a recent tizen update then?
The rep further told me to take the phone to the best buy samsung experience store and have it flashed with the att firmware to get around this issue.. maybe not needed then? (which i assume means a wipe and possibly lose my unlock)

I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.

karlkarloff said:
I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.
Click to expand...
Click to collapse
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that

markm75 said:
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that
Click to expand...
Click to collapse
.
When I first bought the watch it was for the numbersync feature. My first problem was even though the Samsung rep and the bestbuy rep said that it would work with my Note3, it did not. took several calls and many hours of trying to figure out the HD Voice (VOlte) provisioning. Bought a TMobile Note 4, rooted and rom'ed this worked to setup numbersync. the only problem was it would occasionally turn off numbersync, this occurred about once a month. Then if failed completely said that this line is not accceptabl;e for numbersync. this was after about six months. Discovered that it appeared to be age of firmware related, I was on a TM firmware that was several updates out of date. When I odin flashed the latest firmware numbersync worked again until the recent update to 3.0.0.1 on the gear firmware. Now I have the line not acceptable for numbersync again. I'm going to try to update firmware again to see if that works. If not I will probably look to change carriers to TM. will cost the price of a new watch, but will get me out of AT&Ts locked boot loader.
BTW, setting up numbersync on a different phone and switching back will not work, Tried several times and as soon as you turn on the phone that is not HD Voice capable with your SIM card in it the system sees it and turns off numbersync almost instantly. went throught that trying to get my Note 3 to work.
In all my experience the Samsung and AT&T reps were not a good resource. Numbersync does not appear to be a very popular feature and they do not know much about it.

pasco8525 said:
.
When I first bought the watch it was for the numbersync feature. .
Click to expand...
Click to collapse
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).

markm75 said:
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).
Click to expand...
Click to collapse
Yes, that is the whole point of numbersync. The watch uses the phones number not it's own.
Tried updating to the latest firmware and a ROM based on it. No luck still get a rather comical response "Oh darn! We can't enable device syncing on this phone. " worked until the tisen update.

There also seems to be confusion on numbersync with the att reps.. one person told me the watches dont need their own numbers.. that numbersync is all we need (but how would the watch make a call if the phone is off).. another said yes they need external numbers for number sync or solo
edit: i see your last post.. so the latest reps are correct then.... so they assigned us numbers and $10 access fees each with activation fees for no reason basically.. ugh

The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.

Just a quick note...i too spent 3 hours in an AT&T store trying to get numbersync to work..., finally returned the S3 Frontier cancelled the number in it and left frustrated...i now have a GS8 unlocked on AT&T through my work...that is synced to a Verizon Gear S3 Classic lte and i simply use call forwarding with YouMail. If i do not answer my phone after 3 rings it gets sent to my watch and if I still do not answer then Youmail picks it up..If I call out or text with the watch separately then I just let my customers know that I have 2 numbers 1 for my cell and one for their watch. I just don't think AT&T is ready for the Numbnersync technology yet and they just don't care enough to train their own people on it, sad as it is a good promise...
Sent from my iPad using Tapatalk

pasco8525 said:
The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.
Click to expand...
Click to collapse
I meant phone number.. are you saying phone number? After the rep said i didnt need a phone number for each watch, she credited me back the cost of the two lines and said just to contact them that they would enable the numbersync once i had the phones ready.. I'm assuming number means imei, which they still have in the system.

Yes each watch has to have it's own phone number. I believe this is another case of AT&T rep not understanding number sync.

I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.

markm75 said:
I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.
Click to expand...
Click to collapse
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.

markm75 said:
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.
Click to expand...
Click to collapse
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.

eaglerugby04 said:
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.
Click to expand...
Click to collapse
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.

markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
Thanks. It sounds like the latest firmware they did seems to fix some of the issues from bringing a non-ATT phone over but does not resolve everything. It looks like I won't be able to do this though. ATT and the ebay seller are unable to clear the ICCID on my watch, I have to sadly do a return now.

Kinda unrelated, yet ATT was horrible even for normal Sammy phone/watch. After dumping ATT service/hardware for various reasons a few moths back... Sammy watch/phone from Verizon hardware/service works flawlessly. Am carrier neutral, but one works reliably, one didn't.
BTW, Sammy pay via watch hiccuped via ATT at times, yet works flawless via Verizon.

markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
well 5 chat people later they finally fixed the unknown callerid issue.. apparently there is an internal back end feature for numbersync regarding it set to active and on.. both toggles were on.. the rep removed the "on" and now my callerid shows my number when calling from my phone (and from the watch when watch is in solo mode too).. everything works! :laugh: