Related
hello all i am new to the fourms!!!
i am trying to get my p6201 setup with att DataConnect in the US. I went to the store, and they were unable to set it up becuase it was being recognized as a phone per its IMEI. They told me to call att 800 customer support number to try and set it up since they have more options.
i called them, and they did set me up with that DataConnect plan, however, they are having trouble activating my plan. So, i can't use 3g as of now.
i've been transferred to 18 different people there and i have to wait until monday to speak with sales dept. again.
my questions are:
1: has anyone else experienced this?
2: the phone is unlocked, or at least it said it was in the description where i bought it. do I need to flash a different firmware for it?
3: any advice on how I can get it working? or else i will need to ship it back
ty all in advance!
samgalax6201 said:
hello all i am new to the fourms!!!
i am trying to get my p6201 setup with att DataConnect in the US. I went to the store, and they were unable to set it up becuase it was being recognized as a phone per its IMEI. They told me to call att 800 customer support number to try and set it up since they have more options.
i called them, and they did set me up with that DataConnect plan, however, they are having trouble activating my plan. So, i can't use 3g as of now.
i've been transferred to 18 different people there and i have to wait until monday to speak with sales dept. again.
my questions are:
1: has anyone else experienced this?
2: the phone is unlocked, or at least it said it was in the description where i bought it. do I need to flash a different firmware for it?
3: any advice on how I can get it working? or else i will need to ship it back
ty all in advance!
Click to expand...
Click to collapse
bump, no members welcome new people to fourms? can anyone please provide some insight to this question? ty
I have had 6200 on att since novemeber (voice and data), and I will never tell them I have it.
I've heard of some people having great luck with them.
will you be using this for data only?
at&t can be really dumb when it comes to these things. How many were marveled/amazed at your Tab? I think there's been a few others with similar issues to yours.
the key, i believe is finding the right helpful person/rep.
your firmware and baseband should be fine, and you should be unlocked as well.
what are your APN settings?
where are you using this device? in USA? what is the coverage in your area?
do you have a store in your area you can go to? the ones in my area are usually open saturday and sunday, if you have time drop by and try to find a helpful person. TIP: explain your situation but dont give them name/number until you trust that they will help and not try to tell you that you cant use it, etc..
I spent over 2 hours last nite with att reps trying to enable numbersync to work between the s3 and s8 phones.. the s8 phone is an unlocked phone (not bought through att), only to find out today via another rep that the phone must be bought via ATT or truly att branded.. which i find a bit absurd, as i think others have succeeded..
Is this really the case.. anyone know or have this same experience?
Specifically this error would appear after going through the get started via the watch then on the phone (after creating a seperate accessid):
Oh darn! We can't enable device syncing on this phone. Want to find out more? Call us at 800.331.0500 so we can help.
(MSSITWINREL12)
If this turns out to really be an unlocked phone issue (which is a bit ridiculous), i think i read that it might be possible to take my sim card out of that phone and put in another phone that is att branded, enable number sync then put the card back in my s8 and go from there
Thanks
The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.
pasco8525 said:
The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.
Click to expand...
Click to collapse
Thanks for the reply.. your saying you had an unlocked tmobile phone on att and it was working till a recent tizen update then?
The rep further told me to take the phone to the best buy samsung experience store and have it flashed with the att firmware to get around this issue.. maybe not needed then? (which i assume means a wipe and possibly lose my unlock)
I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.
karlkarloff said:
I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.
Click to expand...
Click to collapse
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that
markm75 said:
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that
Click to expand...
Click to collapse
.
When I first bought the watch it was for the numbersync feature. My first problem was even though the Samsung rep and the bestbuy rep said that it would work with my Note3, it did not. took several calls and many hours of trying to figure out the HD Voice (VOlte) provisioning. Bought a TMobile Note 4, rooted and rom'ed this worked to setup numbersync. the only problem was it would occasionally turn off numbersync, this occurred about once a month. Then if failed completely said that this line is not accceptabl;e for numbersync. this was after about six months. Discovered that it appeared to be age of firmware related, I was on a TM firmware that was several updates out of date. When I odin flashed the latest firmware numbersync worked again until the recent update to 3.0.0.1 on the gear firmware. Now I have the line not acceptable for numbersync again. I'm going to try to update firmware again to see if that works. If not I will probably look to change carriers to TM. will cost the price of a new watch, but will get me out of AT&Ts locked boot loader.
BTW, setting up numbersync on a different phone and switching back will not work, Tried several times and as soon as you turn on the phone that is not HD Voice capable with your SIM card in it the system sees it and turns off numbersync almost instantly. went throught that trying to get my Note 3 to work.
In all my experience the Samsung and AT&T reps were not a good resource. Numbersync does not appear to be a very popular feature and they do not know much about it.
pasco8525 said:
.
When I first bought the watch it was for the numbersync feature. .
Click to expand...
Click to collapse
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).
markm75 said:
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).
Click to expand...
Click to collapse
Yes, that is the whole point of numbersync. The watch uses the phones number not it's own.
Tried updating to the latest firmware and a ROM based on it. No luck still get a rather comical response "Oh darn! We can't enable device syncing on this phone. " worked until the tisen update.
There also seems to be confusion on numbersync with the att reps.. one person told me the watches dont need their own numbers.. that numbersync is all we need (but how would the watch make a call if the phone is off).. another said yes they need external numbers for number sync or solo
edit: i see your last post.. so the latest reps are correct then.... so they assigned us numbers and $10 access fees each with activation fees for no reason basically.. ugh
The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.
Just a quick note...i too spent 3 hours in an AT&T store trying to get numbersync to work..., finally returned the S3 Frontier cancelled the number in it and left frustrated...i now have a GS8 unlocked on AT&T through my work...that is synced to a Verizon Gear S3 Classic lte and i simply use call forwarding with YouMail. If i do not answer my phone after 3 rings it gets sent to my watch and if I still do not answer then Youmail picks it up..If I call out or text with the watch separately then I just let my customers know that I have 2 numbers 1 for my cell and one for their watch. I just don't think AT&T is ready for the Numbnersync technology yet and they just don't care enough to train their own people on it, sad as it is a good promise...
Sent from my iPad using Tapatalk
pasco8525 said:
The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.
Click to expand...
Click to collapse
I meant phone number.. are you saying phone number? After the rep said i didnt need a phone number for each watch, she credited me back the cost of the two lines and said just to contact them that they would enable the numbersync once i had the phones ready.. I'm assuming number means imei, which they still have in the system.
Yes each watch has to have it's own phone number. I believe this is another case of AT&T rep not understanding number sync.
I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.
markm75 said:
I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.
Click to expand...
Click to collapse
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.
markm75 said:
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.
Click to expand...
Click to collapse
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.
eaglerugby04 said:
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.
Click to expand...
Click to collapse
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
Thanks. It sounds like the latest firmware they did seems to fix some of the issues from bringing a non-ATT phone over but does not resolve everything. It looks like I won't be able to do this though. ATT and the ebay seller are unable to clear the ICCID on my watch, I have to sadly do a return now.
Kinda unrelated, yet ATT was horrible even for normal Sammy phone/watch. After dumping ATT service/hardware for various reasons a few moths back... Sammy watch/phone from Verizon hardware/service works flawlessly. Am carrier neutral, but one works reliably, one didn't.
BTW, Sammy pay via watch hiccuped via ATT at times, yet works flawless via Verizon.
markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
well 5 chat people later they finally fixed the unknown callerid issue.. apparently there is an internal back end feature for numbersync regarding it set to active and on.. both toggles were on.. the rep removed the "on" and now my callerid shows my number when calling from my phone (and from the watch when watch is in solo mode too).. everything works! :laugh:
So having recently upgraded from an unlocked T-Mobile device running on ATT, I was expecting that I would have better connectivity since the T-Mobile device I had didn't have support for a lot of bands. However I haven't had data work at all since setting up this phone.
Full disclosure, I'm on blackwireless. But it's an ATT mvno so I should still get their network.
But I'm getting zilch.
Talk and text are just fine, just no data.
I'm also not fully used to the interface on this phone cause my old one had actual "bars" in the icon and would also say LTE or 4g. Maybe both, is it sad that I've already forgotten just three days into owning a op7?
Firstly, anyone else an blackwireless, or ATT having issues with data?
Haven't yet called blackwireless because their support is 100% outsourced.
Had same with T-Mobile, it wanted me to sign in...and that page said this plan has no internet. So I called support, they ran a diagnosis but before it could finish ! Near the lte disappeared and it worked
RobbieRobski said:
So having recently upgraded from an unlocked T-Mobile device running on ATT, I was expecting that I would have better connectivity since the T-Mobile device I had didn't have support for a lot of bands. However I haven't had data work at all since setting up this phone.
Full disclosure, I'm on blackwireless. But it's an ATT mvno so I should still get their network.
But I'm getting zilch.
Talk and text are just fine, just no data.
I'm also not fully used to the interface on this phone cause my old one had actual "bars" in the icon and would also say LTE or 4g. Maybe both, is it sad that I've already forgotten just three days into owning a op7?
Firstly, anyone else an blackwireless, or ATT having issues with data?
Haven't yet called blackwireless because their support is 100% outsourced.
Click to expand...
Click to collapse
Have you looked at your APN settings?
Sometimes it just doesn't select anything or it's empty!
You're right. That was the exact problem. I ended up calling the support line and it was a much better experience than I remember. And there were several apn to choose from. I just had to choose a different one according to their documentation.
Global version works just great with AT&T, no need to get tmo phone that just makes it more of a pain int the ass to go through the unlock process
Bradl79 said:
Global version works just great with AT&T, no need to get tmo phone that just makes it more of a pain int the ass to go through the unlock process
Click to expand...
Click to collapse
I know. What I meant was my old phone was T-Mobile. My op7 I bought direct from OnePlus.com
Thinking of buying a sprint v50. Will unlocked sprint version work on tmobile?
intruda119 said:
Thinking of buying a sprint v50. Will unlocked sprint version work on tmobile?
Click to expand...
Click to collapse
I suggest you to go for the Korean model if it's not working. Just make sure to check lte bands for compatibility.
Inerent said:
I suggest you to go for the Korean model if it's not working. Just make sure to check lte bands for compatibility.
Click to expand...
Click to collapse
Have a chance to get a good deal on a unlocked sprint version.
Then go for it. But be sure to be Sim unlocked and lte bands accepted. The Korean sells for 800$ on eBay. Also can be flashed with European firmware and supports secondary screen. Imo has better quality also software aside. Noticed with LG G7... If you got better deal then go for it.
Are you sure it's unlocked and if so, how was it unlocked? I have a Sprint model and I'm having to wait ‘til my 50 service days are up to get Sprint to unlock it. I've contacted some pretty good unlocking services and hearing the same thing from all; As of now only Sprint can unlock it.
As we all know Sprint 5G service area (like all others) is very small but they're still charging everyone who activates this phone on their service for a 5G service plan regardless of whether they have 5G service in your area or not. I got a great deal on a 3rd party phone but it was locked which I knew going in. As soon as it's unlocked, I'm going to try GFI. BTW, it's a great phone.
Inerent said:
Then go for it. But be sure to be Sim unlocked and lte bands accepted. The Korean sells for 800$ on eBay. Also can be flashed with European firmware and supports secondary screen. Imo has better quality also software aside. Noticed with LG G7... If you got better deal then go for it.
Click to expand...
Click to collapse
Sadly lg value goes down extremely fast. I personally wouldnt spend anywhere close to retail with lg phones.
hooutoo said:
Are you sure it's unlocked and if so, how was it unlocked? I have a Sprint model and I'm having to wait ‘til my 50 service days are up to get Sprint to unlock it. I've contacted some pretty good unlocking services and hearing the same thing from all; As of now only Sprint can unlock it.
As we all know Sprint 5G service area (like all others) is very small but they're still charging everyone who activates this phone on their service for a 5G service plan regardless of whether they have 5G service in your area or not. I got a great deal on a 3rd party phone but it was locked which I knew going in. As soon as it's unlocked, I'm going to try GFI. BTW, it's a great phone.
Click to expand...
Click to collapse
Wont be sure until I put my sim card in but it owner says sim unlocked. No interest in 5g anytime soon. If possible will disable/limit to lte.
One thing's for sure.... LG phones drop like a rock! I couldn't wait but I’m thinking in two months this phone's (sprint model) probably going to be selling for $400. Imo the only thing holding the price up for now is there just aren't very many out in the wild. Kind of strange really, since according to the Ifixit breakdown, it has the same Qualcomm 5G X50 modem as both the Galaxy S10 5G phone and the new Note 5G. Otherwise the specs are very similar. I guess it’s all perceived value.
Just in from Sprint tech support;
Hello,
Letting you know your LG V450PM BLK XCVR SGL on line 954-xxx-xxxx
cannot be unlocked because it hasn't been active for more than 50 days.
Go to sprint.com/chat or call *2 for help.
Sincerely,
Shaun K.
Sprint
t-mobile
hooutoo said:
Just in from Sprint tech support;
Hello,
Letting you know your LG V450PM BLK XCVR SGL on line 954-xxx-xxxx
cannot be unlocked because it hasn't been active for more than 50 days.
Go to sprint.com/chat or call *2 for help.
Sincerely,
Shaun K.
Sprint
Click to expand...
Click to collapse
so has anyone activated on t-mobile?
bobn27613 said:
so has anyone activated on t-mobile?
Click to expand...
Click to collapse
My 50 days on Sprint are up in about a week. I'm moving back to Google Fi as soon as I unlock. Of course, Fi uses both Tmob & Sprint networks so I'm fairly sure is will work on one or the other.
bobn27613 said:
so has anyone activated on t-mobile?
Click to expand...
Click to collapse
Im active on metropcs by tmobile.
Everything working fine but i keep getting an activate now popup that is really really annoying
LM-V450PM
Yeah, LG phones drop like a rock.
Some vendor on eBay was selling the Korean V50 with dual screen for $529......yeah.
https://www.ebay.com/itm/LG-V50-Thi...972866&hash=item1f015f8485:g:k9wAAOSw4kZdX2mi
I am just waiting for these to drop even more if that. Doubt the 5G works in other markets.
were you able to use wifi calling ? were you able to eliminate the 'activate' message. Thanks
Finally Sim unlocked and ported over to Simple Mobile, a Tmob Mvno. It was relatively painless and took less than an hour for the actual port. No reason to be on Sprint right now if you don't have 5G service in your area. I was on the phone with Sprint yesterday for at least an hour and a half and gave them every chance to do something about my bill. I asked them point blank why anyone would pay for 5G service when it's not even in their area? Their response was just lame. I'm guessing it will be at least one if not two years before 5G is working in a wide spread fashion in a lot of cities in the US.
Now, as for the service on Tmob's network, it's only been about a hour since I switched but have made couple of phone calls and run a couple of speed tests. Phone call quality seems same same and speed test speeds seemed the same as if I were on Tmob., 15 down and about 7-10 on the upload. Now the freaking really good news. Simple mobile is running a special for 3GBs data and unlimited talk, unlimited text. at $25 per month. If you do auto pay after taxes it's $22 and change.
are all t mobile bands available? Does it work with t mobile 5G?
As of right now, there seems to be a problem with the APN record on the sprint model. Sprint, the scumbag company that it is, has locked the APN. They'll unlock the phone to except other sim cards, no problem. But when your new provider tries to register your phone on their network it doesn't fully complete the process. In other words, part of the process is that a new APN record is pushed down to the phone identifying the new MMS DNS server for that network. I use Simple Mobile which is a MVNO of Tmob but Sprint has locked the APN on my V50. I;m still able to get data but can't send/receive pictures via text messages.
So be ware.
en11gma said:
Im active on metropcs by tmobile.
Everything working fine but i keep getting an activate now popup that is really really annoying
LM-V450PM
Click to expand...
Click to collapse
does wifi calling work? how are updates handled . thank you
We have a pair of sprint unlocked V50 and just got an update over the metropcs service.
In the service menu it says voice over wifi is provisioned but in the settings network voice over wifi is off and the switch wont stay to on position when i toggle to on.
I still see my cellular connection in the notification area disappear then reappear.
Is this normal behavior or is it trying to activate in background? Maybe it checking for 5G?
I think it using more batt then usual possibly
Now....... finally, some good news and this took a bit of doing. To start off with I originally tried an old Fi sim card I had to port out of Sprint after those scumbags unlocked my V50. I kept getting a T077 error during the Google Fi activation process and Fi support just kept telling me that the V50 wasn't a supported device and they couldn’t help. I told them I thought it was a bad sim card so they suggest I pick up a new one at Best Buy. So, after a trip down to Best Buy I found out that they rarely have Fi cards in stock so I picked up a Simple Mobile (tmob mvno) sim for a buck and the port/activation sort of worked in that I successfully ported my number from Sprint and I was able to make calls and get data but couldn't receive/send pictures (MMS) in text. So, I said screw it and order another Fi Sim card thru the Google site and waited a week. I got it yesterday late and tried it this morning and crap it didn't work with the same activation error, T077. I have been scouring the internet for days for any info the error code and somewhere along the way I remember seeing something about taking the mvno card out and then putting the Fi card in and trying to activate without rebooting the phone. Now remember this is really all about not being able to edit the APN record with the correct DNS info so you can receive MMS picture by text. Anyway, after slipping in the FI sim card to my V50 the activation process suddenly squeaked on thru and low and behold I'm now running on Google Fi with MMS working and APN record is correctly updated the Fi info. I think the reason it worked was that the activation process thought I was a Tmob customer. When it asked me for account info to port my existing number to GFI the dialog screen show things like.... Enter your T-Mobile account number and asked what was the name on my T-Mobile account. But for whatever reason it worked and now I'm finally free of Sprint.
It worked for me but your mileage may very.
hooutoo said:
Now....... finally, some good news and this took a bit of doing. To start off with I originally tried an old Fi sim card I had to port out of Sprint after those scumbags unlocked my V50. I kept getting a T077 error during the Google Fi activation process and Fi support just kept telling me that the V50 wasn't a supported device and they couldn’t help. I told them I thought it was a bad sim card so they suggest I pick up a new one at Best Buy. So, after a trip down to Best Buy I found out that they rarely have Fi cards in stock so I picked up a Simple Mobile (tmob mvno) sim for a buck and the port/activation sort of worked in that I successfully ported my number from Sprint and I was able to make calls and get data but couldn't receive/send pictures (MMS) in text. So, I said screw it and order another Fi Sim card thru the Google site and waited a week. I got it yesterday late and tried it this morning and crap it didn't work with the same activation error, T077. I have been scouring the internet for days for any info the error code and somewhere along the way I remember seeing something about taking the mvno card out and then putting the Fi card in and trying to activate without rebooting the phone. Now remember this is really all about not being able to edit the APN record with the correct DNS info so you can receive MMS picture by text. Anyway, after slipping in the FI sim card to my V50 the activation process suddenly squeaked on thru and low and behold I'm now running on Google Fi with MMS working and APN record is correctly updated the Fi info. I think the reason it worked was that the activation process thought I was a Tmob customer. When it asked me for account info to port my existing number to GFI the dialog screen show things like.... Enter your T-Mobile account number and asked what was the name on my T-Mobile account. But for whatever reason it worked and now I'm finally free of Sprint.
It worked for me but your mileage may very.
Click to expand...
Click to collapse
What sms app do you use? Lg or Google? Cuz with Google messaging I have fully enabled RCS. Sending pics and videos over data and wifi. Why bother with mms when RCS technology is way better?
So this past summer I purchased a 4G version of the A52 from Amazon, my main reason being it was cheaper than the 5G. Now I'm finding that this choice may be affecting my carrier situation. I am in the United States, and had Cricket Wireless at the time of purchasing the phone. It worked for about 4 hours, then the service quit on me. Apparently Cricket claimed that my phone did not have the proper technology, blah blah blah, something to do with the discontinuation of 3G and or VOLTE. This obviously does not make sense, since this phone is from 2021 and would not be made with old tech. Anyway, I got them to turn my sevice back on, after it being in a "suspended" state. It was still working for a while, and then some time in september I think Cricket sent a text to me (and my fiance as well, also has a phone cricket doesn't like) saying that they would start redirecting our calls to customer service to get us to "upgrade" since the phones would supposedly stop working completely in February or whenever 3G is supposed to go kaput. So, we switched to Mint, who claimed that our phones would both work on their network, and they did, except that the service sucks, even while being in a modest sized city. It also has little to no service at my work, and I'm convinced that T-mobile's service, at least through Mint, absolutely sucks.
So, my question is, what do you all suggest? Does anyone have this model, and what carrier are you with? What kind of luck (or lack thereof) has anyone been having?
Sorry if this has no place here, just doing all I can to get some answers
Well, I don't think I have a clear answer to your question, this is something that I found very very weird. I handed over a Galaxy S9+ to my fiancee who's carrier name I forget, I think it also got acquired by T-Mobile, but I'm not 100% certain. However, the phone didn't work properly. I can't remember what problems exactly it had but they were network related. Turns out that if you're going to change phones you need to go to a store for them to configure it and change it in their system. Otherwise it will either not work or not work properly.
And this was also the case with her sister who bought an unlocked, Mexican phone and she also had to take it to the store for them to configure it. It would have these problems unless she took it to them.
You would assume that all you need is to insert the SIM and it would work out the box but I don't know why this carrier had this method which just makes everything so annoying and complicated when it doesn't need to be. Oh and this isn't a one time thing, every time they changed phones they would need to do this! So you should probably look at going this route, it's my best guess.
EDIT: Oh and also before we knew this, we had also purchased a Galaxy Note 3 (which yeah it's old, but had 4G when I used it with my carrier and all of a sudden it turned to 3G when used on her carrier) so we ended up giving it away. So it was definitely a carrier problem. It was so annoying.