Ok. I followed these steps http://forum.xda-developers.com/showthread.php?t=1466436 I got to the step and put chinese boot.img onto SD card by creating a root folder and I flashed my phone after rebooting it again...
1) stock ROM is still on there (maybe). tried flashing kernel using All-in-One-Kit and flash your recovery and still not getting anywhere.
Well this would not have happened if I did not forget to flash first before rebooting
help much appreciated? :crying:
Related
Hello, I believed I have an issue. Hope it not to serious. My problem is that i can't get passed the ASUS logo Splash screen.
1st: I was one stock jelly bean rooted cwm recovery v6.0.1.2 and decide I wanted to get on to Hydro 3.6 Jellybean (9/17)
2nd I downloaded the ROM wiped cache,delvic and factory reset then installed, didn't install at first so I tried a mirror and then it installed correctly restarted the tablet and here I am.
3rd: Tried clean rom 2.0 still no luck.
Please help I'm 15 and don't wanna break the bad news to my parents.
Ps: I am able to still boot into CWM recovery 6.0.1.2 tried everything nothing working and able to fastboot but cold boot and wipe data don't work and haven't shut off tablet since accident will remain on and charged.
jekovenatinsley said:
Hello, I believed I have an issue. Hope it not to serious. My problem is that i can't get passed the ASUS logo Splash screen.
1st: I was one stock jelly bean rooted cwm recovery v6.0.1.2 and decide I wanted to get on to Hydro 3.6 Jellybean (9/17)
2nd I downloaded the ROM wiped cache,delvic and factory reset then installed, didn't install at first so I tried a mirror and then it installed correctly restarted the tablet and here I am.
3rd: Tried clean rom 2.0 still no luck.
Please help I'm 15 and don't wanna break the bad news to my parents.
Ps: I am able to still boot into CWM recovery 6.0.1.2 tried everything nothing working and able to fastboot but cold boot and wipe data don't work and haven't shut off tablet since accident will remain on and charged.
Click to expand...
Click to collapse
It's just a softbrick. As long as you can get into fastboot you are ok.
I suggest reflashing the stock jellybean rom. You can download it from the asus website.
As for getting it into your device (i dont know if cwm supprots sd cards yet). You can use the adb push commands or you can flash twrp which supprots flashing from the sd card.
Also next time read the rom thread carefully. It specifically says you should use twrp.
Hey man try this, it works for me (Same situation but i'm 17 xD)
1) Download this http://www.mediafire.com/?5diezc69u1b16f8
2)Extract the "recovery1" folder in C:\ drive
3)Plug the tablet to PC and turn it on while pressing VOL- and POWER, then go to the fastboot mode (is the USB symbol)
4)Download from here ( http://support.asus.com/Download.asp...300T&p=20&s=16 ) the WW of US instead of the version of the tablet you have got, the extract the blob file in the "recovery1" folder
5)Open CMD, type cd c:\recovery1 then press enter
6)Type dir to see if all the files are in the folder
7)type this command fastboot -i 0x0B05 flash system blob
8)After is done, type fastboot -i 0x0B05 reboot
9)Enjoy!
If you can't do any of this steps, post here and I will help you
Fixed It!
ZerOMKD said:
It's just a softbrick. As long as you can get into fastboot you are ok.
I suggest reflashing the stock jellybean rom. You can download it from the asus website.
As for getting it into your device (i dont know if cwm supprots sd cards yet). You can use the adb push commands or you can flash twrp which supprots flashing from the sd card.
Also next time read the rom thread carefully. It specifically says you should use twrp.
Click to expand...
Click to collapse
Hey actually like 10 mins after I posted I was able to install Clean Rom.
I formated every partition except sd card in v6.0.1.2 cwm recovery as well as factory reset and wipe dalvik.
Actually I like cwm recovery better and it does support microsd cards now. This is the jb/touch bootloader.
Thanks for the Help anyways.
.
Same problem, when i try to flash JB Hydro 3.6... i stuck into bootloop... i flash the official asus update and it works... But when i try to flash the hydro rom it doesn't work.... Why?
I guess you have the new JellyBean Bootloader... because of that you can only flash ROM's which are made for it...
.
I know... i update from jb ota to hydro... but when i flash the 3.6 i got bootloop... and now i can flash this rom...
Question on rooting.(Not bricked lol),so about a week ago I got into bootloop because I flashed boot.img when I took it out of the Rom file. I want to know if bootloop is normal when you flash the image file before rezipping the Rom and installing the Rom via teamwin recovery. I'm unrooted and boot is locked so I don't need any help with that. so I just wanted to know if I followed the right process. I have read many threads and never seen anything about bootloop being a normal process when flashing boot.IMG before getting into recovery and installing a ROM. Thanks in advance for anyone providing me an explanation.
WhatTheAndroid? said:
So about a week ago I rooted my phone,got into bootloop because I flashed boot.img when I took it out of the Rom file. I want to know if bootloop is normal when you flash the image file before recapping the Rom and installing the Rom via teamwin recovery. I'm unrooted and boot is locked so I don't need any help with that. so I just wanted to know if I followed the right process. I have read many threads and never seen anything about bootloop being a normal process when flashing boot.IMG before getting into recovery and installing a ROM. Thanks in advance for anyone providing me an explanation.
Click to expand...
Click to collapse
I know it happened for me -- Sometimes it wont enter recovery for me even in the bootloader and I have to Power+Vol Down to get it back into the bootloader. But it makes sense this would be a normal process because if you flash the boot.img without any OS files to load after it will just boot-loop.
Once I get back into bootloader and can get back into recovery and flash the ROM everything goes well after -- although I'm not sure if you would classify this as the "norm" but it certainly happens for me
WhatTheAndroid? said:
Question on rooting.(Not bricked lol),so about a week ago I got into bootloop because I flashed boot.img when I took it out of the Rom file. I want to know if bootloop is normal when you flash the image file before rezipping the Rom and installing the Rom via teamwin recovery. I'm unrooted and boot is locked so I don't need any help with that. so I just wanted to know if I followed the right process. I have read many threads and never seen anything about bootloop being a normal process when flashing boot.IMG before getting into recovery and installing a ROM. Thanks in advance for anyone providing me an explanation.
Click to expand...
Click to collapse
I didn't have a bootloop. Mine just sat on the first htc bootscreen and did nothing. I had to do a simlated battery pull to get it to shut off. Generally I flash the rom in recovery then reboot to fastboot and flash the boot.img. This way you don't have to worry about the bootloop or simulated battery pull.
your just supposed to extract the boot.img not the whole rom. you should never be rezipping anything. if you are on windows i hope your using a real archive utility like 7-zip or winrar. just open the zip and drag the boot.img out which extracts it. flash the boot.img in fastboot then flash the rom in recovery.
getting into recovery from bootloader can be a problem at times but i haven't had this problem once since changing over to twrp 2.3.1.0.
Hello, I know I am an idiot for this.
But I tried to create my own rom, following a guide carefully.
It was a miui rom and I skipped only one thing, because I couldn't find it. I don't think it was anything important that could have caused my dilemma.
To get to the point.
I have the Nexus S 4G
Using TWRP Recovery
I made a backup of my stock rom
I flashed the Rom(I created) and it failed to flash.
So I tried to restore my Stock rom. Once it said it completed.
I tried to reboot and it just brought me back to bootloader screen.
I'm panicking now.
So I use my root toolkit to flash CWM recovery and tried to install a
new rom on my phone, but it's not working
when I try to boot up into a new rom, all I get is a black screen.
HELP PLEASE. ((
edit: when I went back into TWRP to check the log, it said "can't mount SD"
and I went to MOUNT and Sdcard was mounted..
Okay, let me tell you how I soft bricked (Atl east I think its a soft bricked)
It all starts out with me unlocking my bootloader with htcdev, flashing a recovery on it, then putting superuser.
I wanted to install CM 10.1. I don't have s-off, so I read up on how to do it with the procedure of fastboot flash boot boot.img. I put the zip file on ym sdcard and I went into 4ext, wiped cache and dalvik factory reset , and formated system. I rebooted into bootloader and flashed the boot.img. Rebooting it, it got stuck on black screen. With a little research, i found out my hboot probably did not support the jellybean (cm) I was flashing onto it. So I download a gingerbread rom and used the boot.img of that to try and fixed it, it went into a bootloop. Later on after trying this again, it softbricked (Stuck on htc screen). I tried to install another rom onto it , GizRoot. Its a gingerbread rom. It did not help whatsoever.... Anyone can help me with this?
Hello.
So, I used to have a custom recovery (TWRP 2.8), custom rom (OMNI) and things were good. Then I lost my phone, and when I got it back, it didnt have the sd card. Thing is, my custom rom depended on that sd card.
Now, it doesnt go past the htc logo. I tried flashing many roms, never managed to get past htc logo. At this point, I'm good with ANY rom, even stock. I already replaced recovery with stock recovery.img in hopes of maybe getting my phone back. I can easily reflash twrp through fastboot if that's required though.
I'm totally stuck... what can I do? Any help would be much, MUCH appreciated.
Venhiem said:
Hello.
So, I used to have a custom recovery (TWRP 2.8), custom rom (OMNI) and things were good. Then I lost my phone, and when I got it back, it didnt have the sd card. Thing is, my custom rom depended on that sd card.
Now, it doesnt go past the htc logo. I tried flashing many roms, never managed to get past htc logo. At this point, I'm good with ANY rom, even stock. I already replaced recovery with stock recovery.img in hopes of maybe getting my phone back. I can easily reflash twrp through fastboot if that's required though.
I'm totally stuck... what can I do? Any help would be much, MUCH appreciated.
Click to expand...
Click to collapse
Try clearing all your partition using twrp recovery(except sd card).
Then partition your sd card (take a back up and place in pc) based on your desire ROM.
and use the rom if you don't have sd card then try the above steps and flash stock rom.