Hi all,
I have unlocked my HTC ChaCha with htcdev but i cannot root it.
I followed this tutorial : http://forum.xda-developers.com/showthread.php?t=1525404
But when typing adb devices nothing appear
list of devices attached is empty
I have googled it and tried several solutions but still not work
1- update usb driver
2- enable disable enable debugging mode
3- adb kill-server then adb start-server
4- use pdanet and unlockroot software
nothing happened
when I connect the phone while it is switched on
i see :
SH19kv... device
any help.
I have headache from this problem.
OK solved
OK
I solved it
Thanks
not show chacha in when i type the adb list
DrZIZO said:
OK
I solved it
Thanks
Click to expand...
Click to collapse
please how did you solve it?
mohashyne said:
please how did you solve it?
Click to expand...
Click to collapse
I just continue as if it appears in the list and it did work!
sorry for the late reply.
Related
Hello,
I got a strange problem: my phone does not accept adb or fastboot commands sent from my pc anymore. The screen says FASTBOOT when connected in fastboot mode to the pc, but the USB appears only after I move the cursor up or down (push the volume button up or down).
The command line on windows states "Waiting for device...". The driver seems broken. In Device Manager (Windows) it says "Other devices -- Android Phone" with an exclamatin mark. A driver update fails.
I am running CM alpha 12 on a HTC One S (S4). The phone was not connected to my pc while on stock. The Android SDK is installed on the pc and up to date.
The phone is running fine besides the lack of usb access in any way. Charging works fine.
Any suggestions appreciated.
Burkhard
I had the same issue too. I wantet to push a recovery and my pc could not find my device. I reinstalled htc sync and then found the drivers in c:/programs/htc/sync drivers
Sent from my HTC VLE_U using xda premium
SOLVED
I'm delighted it worked. Thank you. I should have tried this before, but I did not think of installing HTC sync. Will keep that in mind.
hello
i have got a seriuos problem,i just booted my phone to fastboot to flash a boot.but when i rebooted to bootloader fastboot usb just dissapears.when i used cmd using adb it says waiting for the device....
anyone please help me from this problem:cryinglease.....................
my device is htc one v,
this problem occurs when am using cm10,and i want to use my stock rom again.
please help me to solve this problem:crying:
udhayababu said:
hello
i have got a seriuos problem,i just booted my phone to fastboot to flash a boot.but when i rebooted to bootloader fastboot usb just dissapears.when i used cmd using adb it says waiting for the device....
anyone please help me from this problem:cryinglease.....................
my device is htc one v,
this problem occurs when am using cm10,and i want to use my stock rom again.
please help me to solve this problem:crying:
Click to expand...
Click to collapse
You have the HTC One V? These forums are for the One S. They are more likely to give better advice
Please need help....!!!!
I accidentally formatted my internal storage , cache , data, system and everything.
I cannot able to mount the USB and not even fastboot as it is saying waiting for device. My bootloader is the only thing thats working, not even my philz recovery is of no use . adb is not recognizing my phone . please help
Please let me know about any solution for the problem
Has your problem solved ir not...???
herzbert said:
Hello,
I got a strange problem: my phone does not accept adb or fastboot commands sent from my pc anymore. The screen says FASTBOOT when connected in fastboot mode to the pc, but the USB appears only after I move the cursor up or down (push the volume button up or down).
The command line on windows states "Waiting for device...". The driver seems broken. In Device Manager (Windows) it says "Other devices -- Android Phone" with an exclamatin mark. A driver update fails.
I am running CM alpha 12 on a HTC One S (S4). The phone was not connected to my pc while on stock. The Android SDK is installed on the pc and up to date.
The phone is running fine besides the lack of usb access in any way. Charging works fine.
Any suggestions appreciated.
Burkhard
Click to expand...
Click to collapse
Hay dear has your problem solved.??
If solved then how.by which method pleas tell me because i am facing the same problem. Thanks in advance
I don't know how he solved but this guide on xda worked for me!
http://forum.xda-developers.com/showthread.php?t=2858337
[GUIDE] Fix Fastboot on Windows 8.1 [Latest fix as of 8/25/14]
Sent from my One S using XDA Free mobile app
faisal459459 said:
Hay dear has your problem solved.??
If solved then how.by which method pleas tell me because i am facing the same problem. Thanks in advance
Click to expand...
Click to collapse
Hello Faisal,
I (re-)installed HTC sync software (as I said in post #3). That is all of the story.
Hope this solves your problem too.
hi... I'm facing a problem in Unlocking bootloader.. I've done exactly everything as mentioned on htcdev site like checking usb debugging and connecting phone to pc through usb in fastboot mode.. but after writing the command fastboot oem get_identifier_token , it just showing waiting for device nothing else for several of hours.. pls tell me what I;m doing wrong... kindly reply me at [email protected]. thanks/... if u have replied here kindly also remind me in the mail .. waiting for ur reply.
aakash.mehra said:
hi... I'm facing a problem in Unlocking bootloader.. I've done exactly everything as mentioned on htcdev site like checking usb debugging and connecting phone to pc through usb in fastboot mode.. but after writing the command fastboot oem get_identifier_token , it just showing waiting for device nothing else for several of hours.. pls tell me what I;m doing wrong... kindly reply me at [email protected]. thanks/... if u have replied here kindly also remind me in the mail .. waiting for ur reply.
Click to expand...
Click to collapse
Have you installed the necessary drivers properly(You can check it in device manager). If not install it and try it again.
Solid Mercury said:
Have you installed the necessary drivers properly(You can check it in device manager). If not install it and try it again.
Click to expand...
Click to collapse
Thanks for replying..
yes I've installed all necessary drives. every thing is working like mass storage, usb tathering and internet pass through.
main problem persists during cmd procedure.
initially I on the phone after checking usb debugging in recovery mode then I select fastboot.
and when i type fastboot oem get_identifier_token and i press enter and result comes in waiting for device .
Nothing else came.
I don't know what to do
aakash.mehra said:
Thanks for replying..
yes I've installed all necessary drives. every thing is working like mass storage, usb tathering and internet pass through.
main problem persists during cmd procedure.
initially I on the phone after checking usb debugging in recovery mode then I select fastboot.
and when i type fastboot oem get_identifier_token and i press enter and result comes in waiting for device .
Nothing else came.
I don't know what to do
Click to expand...
Click to collapse
download and install htc sync..
Without it the main driver will not install ..I think it will work..
Press Thanx button it appreciates me..
aakash.mehra said:
Thanks for replying..
yes I've installed all necessary drives. every thing is working like mass storage, usb tathering and internet pass through.
main problem persists during cmd procedure.
initially I on the phone after checking usb debugging in recovery mode then I select fastboot.
and when i type fastboot oem get_identifier_token and i press enter and result comes in waiting for device .
Nothing else came.
I don't know what to do
Click to expand...
Click to collapse
Uninstall HTC sync (app) in ur phone. I think it is just sync not the HTC sync. I don't have stock rom now to check the exact name.
Guys,
I'm stuck in the very first step in rooting my Explorer..
I installed HTC Sync(but it does not recognise my device) , Downloaded SDK tools but stuck in the step where we have to type
fastboot oem get_identifier_token in cmd..
After this step it just shows
< waiting for device >
and does not move further..
Tried installing various driver packages found in other posts, installing htc sync in compatibily mode but of no use..
P.S - I use WINDOWS 8 O.S in my PC
Please do not post the same question several times
http://forum.xda-developers.com/showthread.php?t=2251857
Is usb debugging ticked on your phone?
Parth_14 said:
Is usb debugging ticked on your phone?
Click to expand...
Click to collapse
Yes it is..
Sachin Thomas said:
Please do not post the same question several times
http://forum.xda-developers.com/showthread.php?t=2251857
Click to expand...
Click to collapse
Thank u for ur reply..
Well, i didnot get many replies there, that is the reason why i posted it here too..
rohit1993 said:
Guys,
I'm stuck in the very first step in rooting my Explorer..
I installed HTC Sync(but it does not recognise my device) , Downloaded SDK tools but stuck in the step where we have to type
fastboot oem get_identifier_token in cmd..
After this step it just shows
< waiting for device >
and does not move further..
Tried installing various driver packages found in other posts, installing htc sync in compatibily mode but of no use..
P.S - I use WINDOWS 8 O.S in my PC
Click to expand...
Click to collapse
Follow the link in post for htc drivers for windows 8
http://forum.xda-developers.com/showthread.php?p=39689824
And when you connect the mobile to pc/laptop select fastboot
When it show fastboot usb highlighted in red
Then do nothing
Just pull out the token for your device by cmd
Hit thanks if helped
Sent from my HTC Explorer using xda app-developers app
Hey guys, i have the following problem.
So I want to unlock the bootloader of my Moto G but to do that I must use USB debugging. But if I use the command "adb devices" it gets always shown as offline. So I did a little research and found out, that since 4.4.2 a Pop-Up should show up to allow USB debugging with the connected PC.
Problem is this Pop-Up won't show up...
Could you please help me. I couldn't find a solution. Really frustating
Have you enabled USB debugging in Developer Options in settings?
Sent from my XT1032 using Tapatalk
Of course I did ^^
battlemaxi said:
Hey guys, i have the following problem.
So I want to unlock the bootloader of my Moto G but to do that I must use USB debugging. But if I use the command "adb devices" it gets always shown as offline. So I did a little research and found out, that since 4.4.2 a Pop-Up should show up to allow USB debugging with the connected PC.
Problem is this Pop-Up won't show up...
Could you please help me. I couldn't find a solution. Really frustating
Click to expand...
Click to collapse
For my XT1031, I had to use the Motorola USB drivers for ADB to work, and Kush's Universal ADB drivers for Fastboot to work.
And if you are using Windows 8/8.1, then you have to disable to forced signature verification in order to install the Universal ADB drivers.
Also, for ADB to work in Windows, I had to set the phone's USB computer connection to Camera (PTP), instead of Media Device.
I'm using Motorolas Drivers. I downloaded them from the official website.
My ADB is also on the latest version (1.0.3.1). Also tried to factory reset my phone. Nothing works, the pop-up wont show up...
battlemaxi said:
I'm using Motorolas Drivers. I downloaded them from the official website.
My ADB is also on the latest version (1.0.3.1). Also tried to factory reset my phone. Nothing works, the pop-up wont show up...
Click to expand...
Click to collapse
Dude, you need to follow the instructions step by step and provide more info about what's going on.
1. Is your "Enable ADB debugging" enabled? You said yes.. does your phone show "Android debugging enabled" icon when you plug it into your computer? If not, you don't have it enabled !
2. If you see the notification, go to Device Manager (hope you are using Windows, or I can't really help you), then can you find your device there? If the USB drivers are installed correctly, then you should see "Android Device" then a "Motorola ADB Interface" inside it. If not, you will see a yellow exclamation with something like "Motorola device"..
3. Did you change your phone's USB computer connection to Camera (PTP)??
If adb says that the device is "offline" but you see its ID, then you didnt authorize (on the phone) the pc to access USB Debugging, its a new feature of 4.4.When you connect your phone, a prompt should appear (check the status bar if it doesnt), saying a computers with RSA Key XX:XX:XX:XX:XX:XX:XX requested access to USB Debugging.
good luck
First of thanks for your help, much appreciated
1. Yes I have USB debugging enabled. If I plug in my Moto G a icon appears in the Notification-Center which says "USB debugging activated"
2. Yes if I go into the Device Manager I can see Android Device
3. Yes I ded change my USB-Setting to PTP
Any other ideas ?
battlemaxi said:
First of thanks for your help, much appreciated
1. Yes I have USB debugging enabled. If I plug in my Moto G a icon appears in the Notification-Center which says "USB debugging activated"
2. Yes if I go into the Device Manager I can see Android Device
3. Yes I ded change my USB-Setting to PTP
Any other ideas ?
Click to expand...
Click to collapse
Actually you do not need adb to unlock the bootloader only mfastboot which does not need adb to work all you do is boot into the bootloader then follow this
http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
liveroy said:
If adb says that the device is "offline" but you see its ID, then you didnt authorize (on the phone) the pc to access USB Debugging, its a new feature of 4.4.When you connect your phone, a prompt should appear (check the status bar if it doesnt), saying a computers with RSA Key XX:XX:XX:XX:XX:XX:XX requested access to USB Debugging.
good luck
Click to expand...
Click to collapse
As mentioned above (first post of the thread) I know that I gotta allow my PC to connect properly to the phone. But the problem is that pop-up thingy wont show up. So I'm not able to allow USB debugging for my PC...
robin0800 said:
Actually you do not need adb to unlock the bootloader only mfastboot which does not need adb to work all you do is boot into the bootloader then follow this
http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
Click to expand...
Click to collapse
Everytime I try to do this i get the errormessage, that those commands or not known even if I'm at the right folder with the fastboot.exe within it. Because of that I thought I would need the connection to be online (I'm kinda new to all of this ).
battlemaxi said:
As mentioned above (first post of the thread) I know that I gotta allow my PC to connect properly to the phone. But the problem is that pop-up thingy wont show up. So I'm not able to allow USB debugging for my PC...
Everytime I try to do this i get the errormessage, that those commands or not known even if I'm at the right folder with the fastboot.exe within it. Because of that I thought I would need the connection to be online (I'm kinda new to all of this ).
Click to expand...
Click to collapse
Just follow those instructions to the letter and any thing you don't understand or get an error message report back here
battlemaxi said:
First of thanks for your help, much appreciated
1. Yes I have USB debugging enabled. If I plug in my Moto G a icon appears in the Notification-Center which says "USB debugging activated"
2. Yes if I go into the Device Manager I can see Android Device
3. Yes I ded change my USB-Setting to PTP
Any other ideas ?
Click to expand...
Click to collapse
Hmmm... so.. what do you see when you type "adb devices" ?
Also, in your Device Manager, is the Motorola ADB interface properly installed? (no issues)?
And yes, to unlock the bootloader you just need Fastboot... when you boot to Fastboot and type "fastboot devices" do you see anything?
Okay, I will Unlock my Bootloader tomorrow but I would like to fix this issue, because I might encounter it in the future :/
battlemaxi said:
Okay, I will Unlock my Bootloader tomorrow but I would like to fix this issue, because I might encounter it in the future :/
Click to expand...
Click to collapse
Well, are you sure you fastboot works?
If so, it's very weird why adb won't...
And yeah, ADB is very useful... if not lifesaving...
Okay I'm sure fastboot works, cause I just unlocked my phone. So got anyone any ideas how I could Allow USB debugging ? :/
battlemaxi said:
Okay I'm sure fastboot works, cause I just unlocked my phone. So got anyone any ideas how I could Allow USB debugging ? :/
Click to expand...
Click to collapse
Can you see adb in the computer device manager program
battlemaxi said:
Okay I'm sure fastboot works, cause I just unlocked my phone. So got anyone any ideas how I could Allow USB debugging ? :/
Click to expand...
Click to collapse
Couldn't wait till tomorrow to unlock the bootloader huh?
Hmm... Did you use the Motorola USB drivers from the Motorola Device Manager 2.4.5?
And everything is properly installed in Device Manager? No devices with yellow exclamation?
And ADB devices shows no list of devices attached?
So weird...
battlemaxi said:
As mentioned above (first post of the thread) I know that I gotta allow my PC to connect properly to the phone. But the problem is that pop-up thingy wont show up. So I'm not able to allow USB debugging for my PC...
Everytime I try to do this i get the errormessage, that those commands or not known even if I'm at the right folder with the fastboot.exe within it. Because of that I thought I would need the connection to be online (I'm kinda new to all of this ).
Click to expand...
Click to collapse
You can revoke all authorized devices for adb access.The option is right below the USB Debugging switch in Developer Options.
Then reboot your moto g and try again.
liveroy said:
You can revoke all authorized devices for adb access.The option is right below the USB Debugging switch in Developer Options.
Then reboot your moto g and try again.
Click to expand...
Click to collapse
Even if you revoke, you should see the device listed if you run "adb devices"...
neozen21 said:
Couldn't wait till tomorrow to unlock the bootloader huh?
Hmm... Did you use the Motorola USB drivers from the Motorola Device Manager 2.4.5?
And everything is properly installed in Device Manager? No devices with yellow exclamation?
And ADB devices shows no list of devices attached?
So weird...
Click to expand...
Click to collapse
Nope
I guess I have the newest Version, cause I downloaded it from Motorola.com
Yes everything is working no yellow thingys what so eher..
If I use the 'ADB devices' command the ID of my device shows up but as already mentioned it's offline.
Gesendet von meinem XT1032 mit Tapatalk
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
is it the 4th one down for us using the p11 pro 2021?i guess ill need to install play store, services and framework?
thanks
New issue after ive gone into bootloader adb commands dont work, basically adb devices lists nothing, it was working and now it not, device manager has it listed..
russy23 said:
New issue after ive gone into bootloader adb commands dont work, basically adb devices lists nothing, it was working and now it not, device manager has it listed..
Click to expand...
Click to collapse
Did you enable USB debugging in Developer settings?
heinhuiz said:
Did you enable USB debugging in Developer settings?
Click to expand...
Click to collapse
Yup..not sure what's up...it was fine before..windows driver is the same
russy23 said:
Yup..not sure what's up...it was fine before..windows driver is the same
Click to expand...
Click to collapse
Maybe reconnect it or use another cable. It happens sometimes.
russy23 said:
New issue after ive gone into bootloader adb commands dont work, basically adb devices lists nothing, it was working and now it not, device manager has it listed..
Click to expand...
Click to collapse
Shouldn't you use fastboot command instead of adb in bootloader mode
AhmadNaimHebat said:
Shouldn't you use fastboot command instead of adb in bootloader mode
Click to expand...
Click to collapse
Your right I realised after a while