Good morning guys, sorry about the english. So, a while back I installed the 12.1 cm in my GT I9515L (Galaxy S4 VE), the rom was running normally, but i had some problems in some applications that were not compatible with the version BOJ1 (Lollipop). I performed the downgrade of the same for AJN1 (KitKat) to reinstall the CyanogenMod above, the problem is that whenever I go into recovery mode, time to flash the GAPPS, one error appears saying that the version isn't compatible. I performed the test of reset the machine without installing any version of gapps, and the cell was automatically updated to version Lollipop. I would like to ask for your help because I am unable to keep KitKat version in Cyano. I think that it's a litte mine mistake on wipes or in version of cyano, but I googled a lot and found nothing. Thank you guys.
Hi guys,
I bought a cheap tablet, It worked fine until i got an update to lollipop, it slowed the device down horribly and it can't multitask at all anymore. Even opening a new tab in google chrome is terrible laggy and slow.
I managed to get the tablet rooted with kingroot, the programs that came with it to clean and speed up the device work great, but the tablet still not works optimal.
When i tried to install the old rom from the asus website in recovery it sayd it cant find the root destination folder or something like that. And rom manager says there is a more recent version of cwm but when i want to install it it says my tablet is not supported. So how can i go back to the kitkat version of the rom? Am i doing something wrong?
Thanks in advance for your help!
up
anyone?
no one?
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Fleacore210 said:
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Click to expand...
Click to collapse
Go to sammobile and flash the latest stock firmware for your device .
Newyork! said:
Go to sammobile and flash the latest stock firmware for your device .
Click to expand...
Click to collapse
Well after a short research I found a ROM called Resurrection Remix, loaded with 5.0.2 (or Lollipop) however now everything is force closing and I barely got my laptop to see it as MTP again after installing a new Binary (glad that did that trick for that) but I cant get it to boot into CWM Recovery bc I cant access the app the only thing it will let me do right now is change the Binary.
How can I fix this issue?
Edit: Okay so I got that solved with doing a factory reset twice, booted in CWM, loaded up the GApps. Now just wondering if there is away to make it not seen with phone options like the dialer or msgs as its jus a plan old tablet, doesnt take a sim card and has no carrier. I do have the source code but I am not tweaking that til I get a better understanding of it.
After a lot of research and tries (amazingly without bricking) I am now running an even newer version of a CM 13 Marshmellow
If the following table is correct then I have a GT-N8013. I'm running KitKat 4.4.2 on it: (N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.md5).
How close can one get to the latest version of Android and still have a working GT-N8013?
GT-N8000 - Wifi+3G+calling
GT-N8005 - Wifi+3G
GT-N8010 - Wifi (Except USA)
GT-N8013 - Wifi (Only USA)
GT-N8020 - Wifi+LTE
KK 4.4.2 is the last release from Samsung .
Android then see your models custom rom section .
JJEgan said:
KK 4.4.2 is the last release from Samsung .
Android then see your models custom rom section .
Click to expand...
Click to collapse
I've just picked up a used 10.1 (first edition) and am hoping to get it onto 5.1.1 or 6.01.
I see a custom CM ROM from Cyanogen, that states it's 6.0 official, but when I go to the site the release is really old for the 8013, and I'm not sure if it's been grouped in with the more recent beta group that is linked in the thread or if it's not.
I also see an older Cyanogen thread for 12, but that's pre 6.0 and appears to be somewhat abandoned.
My Note 3 is on phronesis 6.0.1, and I would like to get the Note 10.1 to as close to that as possible, without dealing with any major bugs.
Thank you for your assistance.
Some progress.
I managed to update mine to Marshmallow 6.0.1 (cm-13.0-20160523-UNOFFICIAL-n8013.zip) via CWM v6.0.3.6 but Google Apps keeps crashing.
I've tried both open_gapps-arm-6.0-nano-20160721.zip (Open GApps) and gapps-600-base-20151107-1-signed.zip. Both take hours to install and just keep crashing whenever you try to do anything.
Anyone have any luck getting cm-13.0-20160523-UNOFFICIAL-n8013.zip / and GApps.zip working?
Basil Rathbone said:
I managed to update mine to Marshmallow 6.0.1 (cm-13.0-20160523-UNOFFICIAL-n8013.zip) via CWM v6.0.3.6 but Google Apps keeps crashing.
I've tried both open_gapps-arm-6.0-nano-20160721.zip (Open GApps) and gapps-600-base-20151107-1-signed.zip. Both take hours to install and just keep crashing whenever you try to do anything.
Anyone have any luck getting cm-13.0-20160523-UNOFFICIAL-n8013.zip / and GApps.zip working?
Click to expand...
Click to collapse
I had it crashing initially too, with CM-13.
I reinstalled the ROM, root, twrp, everything. I also made sure to install the latest "Stock" Gapps, before rebooting once the ROM was in place. Since then I have not had any issues.
I did however have some issues using the nano package. Hope that helps.
Still no joy
I still can't get CM-13 to work. I use CWM. I made sure I was using the latest CWM 6.0.4.6.
I booted into CWM, factory reset and cleared cache. Flashed cm-13.0-20160523-UNOFFICIAL-n8013.zip.
I then factory reset and cleared cache again and flashed gapps-600-base-20151107-1-signed.zip.
I then factory reset and cleared cache again and rebooted.
No joy.
What actual gApps and CM-13 did you use? Maybe I need to use the same version of TWRP as you used?
I'm stumped.
--------------------------------------------------------------------------------
bladebarrier said:
I had it crashing initially too, with CM-13.
I reinstalled the ROM, root, twrp, everything. I also made sure to install the latest "Stock" Gapps, before rebooting once the ROM was in place. Since then I have not had any issues.
I did however have some issues using the nano package. Hope that helps.
Click to expand...
Click to collapse
Basil Rathbone said:
I still can't get CM-13 to work. I use CWM. I made sure I was using the latest CWM 6.0.4.6.
I booted into CWM, factory reset and cleared cache. Flashed cm-13.0-20160523-UNOFFICIAL-n8013.zip.
I then factory reset and cleared cache again and flashed gapps-600-base-20151107-1-signed.zip.
I then factory reset and cleared cache again and rebooted.
No joy.
What actual gApps and CM-13 did you use? Maybe I need to use the same version of TWRP as you used?
I'm stumped.
--------------------------------------------------------------------------------
Click to expand...
Click to collapse
I used the ARM 6.0 Stock version for CM 13. http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
I ended up swapping to the 2014 model because I got a good deal on a Verizon version (which is locked but oh well), so I don't recall the TWRP that I ran. It sounds like that sometimes gives people issues.
I do recall that using the nano version of gapps was not working for me. Could be a coincidence, but I had constant crashes when I tried using it.
This is the thread I used to grab the ROM and TWRP: http://forum.xda-developers.com/galaxy-note-10-1/development/rom-lollipop-t3269375
It helps to read the installation notes properly
The problem(s) I was having were resolved by using twrp-2.8.7.0-gt-n8013 instead of N8013-CWM-Touch-6.04.6. I also used open_gapps-arm-6.0-stock-20160803 instead of nano but I really think it was TWRP that made everything work.
I'm now running cm-13.0-20160523-UNOFFICIAL-n8013 without any problems.
I consider this thread closed.
Basil Rathbone said:
If the following table is correct then I have a GT-N8013. I'm running KitKat 4.4.2 on it: (N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.md5).
How close can one get to the latest version of Android and still have a working GT-N8013?
GT-N8000 - Wifi+3G+calling
GT-N8005 - Wifi+3G
GT-N8010 - Wifi (Except USA)
GT-N8013 - Wifi (Only USA)
GT-N8020 - Wifi+LTE
Click to expand...
Click to collapse
How did you get KitKat on n8013. It was never released and no one successfully flashed 4.4 n8010 to n8013. Odin keeps giving an error. Please I've been trying for years now since it's been 2 years since update was released and doesn't look like it'll ever release (**** yoi Samsung with your update **** and regions)
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
MrAwesome75 said:
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
Click to expand...
Click to collapse
Well official only kitkat if you are international (Samsung decided not to release a lot of device updates in the us for kit kat including the s3, galaxy light, and this one). However I think you can get CM 13.1, idk about anything more recent but there is a (slightly) active community for it still left. Its a shame that this flagship tablet was neglected. I hope it doesn't happen with future Samsung ones but I've avoided buying any. I still use mine on jellybean for basic internet browsing and games
zMrAwesome75 said:
Quote:
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
Click to expand...
Click to collapse
Not sure if you're still looking but I just installed Android Nougat v7.1.2 using the instructions provided here:
https://forum.xda-developers.com/showthread.php?t=2185119
I have a N8010 that topped out at 4.1.2. I flashed to a N8013 kernel/rom about 2 years ago which maxed out at 4.2.2 . I just recently found that link to the LineageOS build (Formerly Cyanogenmod) when I was contemplating buying a new tablet. The tablet was getting a bit sluggish so I decided to go ahead and blast it out and see what happened. I was VERY pleasantly surprised! Had some issues getting the Recovery flashed but once I did, it was pretty smooth from there. I had backed up all the apps so once I got it booted and restored all the apps, I was surprised how responsive it is. Oh, and you can say goodbye to all those SD card issues that the Note 10.1 had since this version of Android integrates the external SD with the internal SD so everything gets installed on the external card. No need for apps like folder mount, etc.
I highly recommend it. The only issue is that you lose the integrated S-Pen functionality but you can reinstall some of those apps from the play store and bring back a lot of those features. Some 3rd party apps actually work better.
Good luck!
7.1.2 on GT-N80013
I am currently running an unoffical build I picked up here on xda it is an unofficial Lineage OS build. I haven't currently found any bugs... camera works, bluetooth works, wifi works... at least for me. The build number is 14.1-20170810-unnofficial-n8013
Hannover2k said:
Not sure if you're still looking but I just installed Android Nougat v7.1.2 using the instructions provided here:
https://forum.xda-developers.com/showthread.php?t=2185119
I have a N8010 that topped out at 4.1.2. I flashed to a N8013 kernel/rom about 2 years ago which maxed out at 4.2.2 . I just recently found that link to the LineageOS build (Formerly Cyanogenmod) when I was contemplating buying a new tablet. The tablet was getting a bit sluggish so I decided to go ahead and blast it out and see what happened. I was VERY pleasantly surprised! Had some issues getting the Recovery flashed but once I did, it was pretty smooth from there. I had backed up all the apps so once I got it booted and restored all the apps, I was surprised how responsive it is. Oh, and you can say goodbye to all those SD card issues that the Note 10.1 had since this version of Android integrates the external SD with the internal SD so everything gets installed on the external card. No need for apps like folder mount, etc.
I highly recommend it. The only issue is that you lose the integrated S-Pen functionality but you can reinstall some of those apps from the play store and bring back a lot of those features. Some 3rd party apps actually work better.
Good luck!
Click to expand...
Click to collapse
I'd appreciate a link to the rom you installed. Thx.
I'm interested as well I'm still running original os. Also wondering if the rom update works well on these tablets since they are older. As Android matures the os gets bigger which can impact performance on older CPUs.
cloves said:
I'm interested as well I'm still running original os. Also wondering if the rom update works well on these tablets since they are older. As Android matures the os gets bigger which can impact performance on older CPUs.
Click to expand...
Click to collapse
I recently installed Lineage OS 14 and it is working great.
Tablet is stable, everything works, great battery life.
All devices work gps, etc...
The s-pen will not work like it did stock but there are apps you can get that seem to work better
Squid and Sketch for drawing....squid seems cool if you write with stylus
Install Magisk instead of supersu.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Hi
A few months ago I installed Team Win Recovery and Android CM on my Samsung Galaxy Note 10.1 because stock android slowed it down. That was however a bad idea as Android CM is not supported by some apps which I use. Now I wanted to go back by stock android.
I used newest Odin to install a stock version which I found on the internet (stock software is hard to get). I was not in super user mode when I did it. Since then my Tablet is busted. On start it remains on the Samsung Galaxy Note 10.1 logo. Cannot get into TWRP anymore. Tried to install TWRP via odin, does also not work.
Was it a problem that I wasn't SU user, or was the stock software not compatible? Can I change SU user state via Odin? Any idea how to get out of this mess?