How to install Android in Huawei u8800pro ?
my phone got formatted and opening in blue screen... pink screen mode also working when i connect to PC only one drive showing empty with 256 mb capacity..
Could anyone help me to make fresh installation of android 2.5 to it
O.O
help also
I want to install android on my Huawei too, how can this be done? will thank when helped
Related
Hi,
I'm using spice mi 310. I want to install custom ROM on this device.
I've rooted my phone using z4root. I've installed Busybox installer, ROM manager, Script manager, terminal emulator, superuser.
Whenever I tried to install ClockWorkMod Recovery through ROM manager it shows different phone models other than Spice mi 310.
It is showing following phone models.
1. Huawei Pulse Mini
2. Dell Streak
3. Huawei Pulse
4. Commtiva Z71
5. Geekphone ONE
6. Spice MI700
7. Huawei Ascend
8. Huawei U8220/U8230
Please suggest because i'm new to android & want to learn and try new things!
Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=1160213
this post will help..
Thank you once again for reply....!
I'm facing the reboot problem with my phone twice in a day. On notification bar the "SD card removed successfully" and then instantly "preparing for SD card" like this two messages pop ups in every 3 to 4 hours. I don't know what is the problem. Can you help with this issue?
Reply would be greatly appreciated.
for GoClever i102 not booting device ( the same with AIRIS KIRA N10020)
I had this problem and managed to solve it. Maybe i can help others.
1.get the firmware from http://airis.livedrive.com/IO/DownloadSharedFile?NodeID=0ed5e3b3a95d42e198fdfad4e1d780a3&AID=336352 or http://www.airissupport.com/SupportHome2.aspx?Codigo=N10020 with tutorial (use google translate because it's in spanish)
2.download winimage for windows http://www.winimage.com/download/wima6490.exe install it for evaluation copy and run as administrator
3.insert a microSD card in a card reader and connect it to your PC, start winimage>DISK MENU>RESTORE VIRTUAL HARD DISK IMAGE... and select the card reader and you will have to select the firmware for your device. It will promt you that all the data from the SDcard will be erased and let it finish the job. It can promt you for an error hit OK and continue.
4.Remove the card from the CardReader after image was copied and insert it into your turned off GoClever device. Conect the charger and start the device. It will boot by itself and install everything. It will promt you to remove the card when finished. Restart and let it boot (1st boot might take up to 5 minutes)
5.Format the microSd card.
https://www.youtube.com/watch?v=QdEaXlWZTp8 a video tutorial
This method worked for me, I'm not responsable for damaging your devices.
glad if i helped!
I am now trying to install like you explained... will see if it work's
worked for me on a netbook goclever l102
the best tutorial to me to work on a netbook GoClever L102 !!!
Thanks, it woked for me
It worked for my GoClever i102 - n10020.
Also I managed to root it. If someone is interested in how to do it, the instructions can be found here:
http://forum.xda-developers.com/android/help/rooting-goclever-i102-n10020-t3119091
Thanks again!
help please
it came to my hands a goclever android netbook I102 used from one of my cousins thats stuck on a never ending loop with the android/goclever logo when it starts. I tried to do the option this post gives ( and ty in advance for that ) because i couldnt find anything else out there on the internet. But my problem still persists, i tried to use both an sd card and a usb pen and nothing changed. Does anyone know what else can be done to boot the netbook? or reinstall the android system? It doesnt allow the netbook to even start so theres nothing much i can do, im not an expert on the matter but i wanted to at least see if there was a way to salvage the device. If not is going on a one way trip to the trash.
I've also tried to look for the download of the android system for the goclever netbook but couldnt find any.
Any help would be much apreciated Thanks.
kmapsi said:
it came to my hands a goclever android netbook I102 used from one of my cousins thats stuck on a never ending loop with the android/goclever logo when it starts. I tried to do the option this post gives ( and ty in advance for that ) because i couldnt find anything else out there on the internet. But my problem still persists, i tried to use both an sd card and a usb pen and nothing changed. Does anyone know what else can be done to boot the netbook? or reinstall the android system? It doesnt allow the netbook to even start so theres nothing much i can do, im not an expert on the matter but i wanted to at least see if there was a way to salvage the device. If not is going on a one way trip to the trash.
I've also tried to look for the download of the android system for the goclever netbook but couldnt find any.
Any help would be much apreciated Thanks.
Click to expand...
Click to collapse
Does the tablet booted succesfuly from the sd card you used?
If yes, have you tried with the updated android version (N10020-1.6.vhd)?
Hello Member,
As i know i am very new to this forum.....
But I am a regular reader of this forum.
I need help about my China Tablet which is 9.7 inch dont know of which brand and on tabet there is no name of tablet mentioned on device/Box.
Few month ago the device was running on android 4.0.4... i think it was raw android... 1 month ago i read a article on XDA For cynogen 9 for china/All winner Tablet... So i downloaded and installed through sd card... but when my tablet restarted it shows a message...
" Encryption Unsuccessful " and it is showing a reset tablet button in bottom when i touched on it nothing happen..... Dont know why the touch is not working, So i attached a keyboard but nothing happen when i clicked on the button....
So after i tried many times to install different-different custom Rom by sd card. But each and every time it says.. " E: Signature Varification Failed"
Here Are The specification Of tablet..
OS- Android 4.0 Was installed But Currently It is Having Cynogen 9 (Not Working)
CPU- ARM Cortex-A8 1GHz
RAM- 1GB
ROM- 16GB
LCD- 9.7 INCH
TOUCH PANNEL- CAPACTIVE
2D/3D- AMD Granphic Accleration, Full Support
GRAPHIC- OpenGL ES2.0(AMD Z340) and Open VG1.1(AMD Z160)@27M Tri/sec
WIFI Wireless- Support 802.11b/g/n standarD, highest transmission get to 300Mbps, support local WAPI wireless protocol standard..
I Am Having Some ROM,CWM.. Pics Are Attached....
1- Start Screen-1
2- Start Screen-2
3- Start Screen-3
4- Error Message
5- Error While Installing Rom From Sd Card
6- All Android Developer Software
7- Custom Rom List
8- Cmw
Bro.... one thing more when i want to tell when i connect the device to pc.... it identify and install the drivers via internet... but not read the internal storage..... But in new it was working fine.....
Plz Help Me To Reacces My Tablet...
I will Be Very Thank Full To All Of You.......
THNX
Good staff, researched a lot until you update my Blu Studio Energy for Lollipop.
As we know updates for Gionee M3 are the same as Blu Studio Energy, the update that was installed for M3.
Follow the steps:
Download the firmware to your MTK6582:
http://xdafirmware.com/gionee-m3
Install the drivers needed to recognize your device, after that download the spft:
http://forum.xda-developers.com/showthread.php?t=2650125
Root, download apk and install:
http://www.kingroot.net/down
I tried many times and always gave error at installation time by reading in some forums I saw that needed to install the rom format the device before and then download. So I did, installed smoothly.
Hello my friend. Thanks for the post. But are you completely sure that this steps will work on the Studio Energy D810L ? What version do you have.. Can you post a video or maybe screen shots?
frankometromonzzon said:
Hello my friend. Thanks for the post. But are you completely sure that this steps will work on the Studio Energy D810L ? What version do you have.. Can you post a video or maybe screen shots?
Click to expand...
Click to collapse
Hello friend, mine is the Blu Studio Energy D810L. Unfortunately I can not make a video, but if you know how to use the Smart Phone Flas Tools you will get no problems, just download the latest version for Gionee M3, all roms for Gionee M3 serve for the Blu Studio Energy, as the twoThey have the same hardware change only marks.
Thanks! It worked
Please help me. I downloaded rom, flash tools, driver and installed but i cant update my phoẹ to lollipop. Please
Just wondering. My laptop is dual boot linux, windows8 so the mediatek usb driver won't work to connect to the phone via usb. Would it work to copy the lollipop rom the phone and use flashify or something like that to install it?
Good job but the problem is the storage of the System
hi to all developers,
i just download firmware lollipop to my Gionee m3 from here xdafirmware(dot)com/gionee-m3
but the problem is the System free is too low in the same time Phone storage free is 1.79GB for nothing .
in most time when i install an application of 50 or 60 mo i have the msg of storage insufisant or low storage :crying:.
if u have a solution or custom rom (lollipop) for that problem please put them here.
if u can ad 1GB from Phone storage to the System.
thanks. ps
soltanisamir said:
hi to all developers,
i just download firmware lollipop to my gionee m3 from here xdafirmware(dot)com/gionee-m3
but the problem is the system free is too low in the same time phone storage free is 1.79gb for nothing .
In most time when i install an application of 50 or 60 mo i have the msg of storage insufisant or low storage :crying:.
If u have a solution or custom rom (lollipop) for that problem please put them here.
If u can ad 1gb from phone storage to the system.
Thanks. Ps
Click to expand...
Click to collapse
use link2sd after rooting
hellow what firmware should i download here?? http://firmwarefile.com/gionee-m3
Any recovery for this one?
Nice Work
Hello,
First time writing on the forum so please tell me if I do something wrong .So ,yesterday i've installed kubuntu on my nexus 7 , via platform tools (flashing img on fastboot).In kubuntu i have installed gpartition with terminal ,because i've saw that i only have 6 gig of free memory on 16 gig nexus 7 , and i wanted to know why.I opened it and when he finish analyze my tablet ,he find 15 gig of unalocatted space.So i decided to format that partition.After a minute he promted an error ,that he can't create disk label and adviced me to reboot before making any changes.After i closed all apps ,i rebooted my tablet , but something happened, she doesn't boot up any more.I tries diferent buttons combo,but she doesn't boot up,and i noticed that i can't access bootloader or custom recovery or fastboot.From some resources on internet i've found that it may be hard bricked.Can anyone tell me if is it hard bricked( i hope not) and if is it , how to solve that? I also want to add that i don't know to use nvflash , and i've never maked blob file backup. Can anyone pls help me?