[APP][2.3+] Hold Screen ON v1.35 - Galaxy Note GT-N7000 Themes and Apps

Hello, I want to introduce the Hold Screen ON app.
Bring a little bit of SGSIII opportunities to your phone
This application act as service and use front camera of your phone for human face detection. When the face is detected, the application will prevent the locking of phone's screen. Just keep the screen on while you are looking on it.
Key features:
This application uses your phone's camera only during the face scanning. By default, it is 3 frame every 5 seconds. Between these intervals, you can run any other application which can lock up and use the camera.
If your front camera have low resolution or small viewing angle, you can use eyes detection instead of face detection. Or all toghether.
The app can detect the phone rotation and respectively rotate image.
This is a Lite version. Therefore, application service's activity will be stopped after 10 minutes of continuous operation. Just restart the service, when it happens.
Requirements:
Android 2.3+ device with frontal camera
Download link:
play.google.com/store/apps/details?id=com.kkeyser.android.eyebuddy.demo
And the last:
I myself am the owner of the Note and often use my application. I think many will be interested in it. Of course, I am pleased to hear all your suggestions and comments

I used a similar app called ISeeYou and to be honest it didnt work so well for me,
Does this one work perfectly ? Dont want to be buying apps that dont do the job

Just try it and decide I post link to the free version. Unlike the ISeeYou, I use opencv library with face and eyes detections cascades. The benefits is a eyes detections (in addition to face detection). Disadvantages is apk size - now about 4 MB.

Update:
Version 1.27 is released.
New features and fixes:
Application binding: now you can describe app behaviour on all or one apps running.
Minor and major bug fixed

Hi trying the app now. It does not work in low light condition on the Note.
Any suggestions
Sent from my GT-N7000 using xda app-developers app

how is the battery usage with it?

Sorry, but in low light conditions any face detections app is lost. I try to improve detection algorhytms, but it can take some time.
About battery drain - mostly depends on scan interval. When screen goes off, the worker thread stops - run only when screen on (depends on app binding rules).

v1.32 is released
Version 1.32 is released.
New features:
Native (Android) face detection method implemented
Image histogram normalization was inplemented

New version
New release: 1.35
* Notification management
* Remove lag in the main app menu
* Legend on tap on preview image

This is when we say smart innovation bravo bravo bravo, perfect idea and perfect developing keep up mate...Thanks

New release
New release: 1.45
Applications binding feature
Light sensor support
Proximity sensor support

thanks for the application mate.
btw could u please tell me if we can configure fps?
regards

New release: 2.2
New version: 2.2
What's new:
Total UI redesign
Touch detector
Many bugs fixed = stability improved
P.S. I hope, new bugs is _not_ appears )

Related

[Jan-10]: [App] [G-Sensor] [Brand New] The XSense v1.2 Final

Credits:
Foremost, let us all acknowledge Koushik for his brilliant "Sensors" library upon which most if not all non-HTC apps that use the G-Sensor, Light-Sensor, and Navi-Sensor are built, simply ingenious. Moreover, I would like to recognize No2chem for the NeuLed2 library which is an equally exquisite peace of code that allows access to the Diamond/Pro Leds. Without those two guys, accessing these advance interfaces on the diamond/pro would be inapproachable at best.
Reason: HTC gave these phones lots of sensors, lets give them.."Sense".
......... EXTRA-Sense ...........
* Hopefully an innovaton, though mostly an integration of RANDOM but needful features...
Features:
1. Courtesy Profiles:
- Set Volume Profiles to activate on Face-Down & Face-UP events. Choose from: None, Silent, Normal, and Vibrate. You can also choose to suspend the Phone when its facing down.
2. Notifications-Sense:
- IF there is/are any outstanding notification(s), the device will vibrate whenever you move it - at customizable intervals: Missed Call(s), Voice Mail, and SMS.
3. Stylus-Sense:- When the Stylus is in/out: Will play sound + Blink the Back button's light.
- When the Stylus is out and the device is moved: Device will vibrate faintly + blink the Back button's light to REMIND you that the Stylus has not been placed back in. This goes on UNTIL the Stylus is placed where it should be.
* Uses "in.wav" & "out.wav" files in the \XSense\ Dir; you can use whatever wave files for this. OR, use the UI to select whichever wave files you want!
4. General Settings:
- Polling Interval: From 200 to 3000 Miliseconds. This determines the rate at which the G-Sensor is polled. Lower values give higher response times and fluid operation at the cost of battery life & CPU utilization.
- Flash Navi Lights: Will blink button lights to notify you of Profile changes and Stylus In/Out.
- Vibrate on Events: Will induce very subtle vibrations to notify you of Notifications and Profile changes.
- Suspend when UP-Side-Down: ???
- Light Navi Button When Suspended: Will do just that when the Light Sensor senses Dim or Dark conditions. This is an independent setting that turns ON the Navi button's light at suspend time, and OFF at Resume time (this is Event Driven, so no polling is involved). This feature really helps if, like me, you want to see where the damn thing is in the dark - before you launch it against the floor.
5. Installs to "\Program Files\XSense", and Creates 2 shortcuts:
"Start Menu\Programs\XSense" and "Startup\XSenseSvc".
Program Settings are saved to the Registry at "HKCU\Software\XSense\".
Use of System Resources:
1. Diskspace: 162 KB RAM footprint: 374-535 KB Battery: NOT observed.
2. CPU Usage: %0.29 Average. Spikes for 2 seconds to %2.7 - %8.5.
3. Battery Impact: Neligeable if at all!
* Indicated CPU usage occurs ONLY when there is an EVENT (posture changed, stylus in/out Sounds playing,
etc)
- Vibration: The way I like it is in waves of 200 miliseconds length! I generally hate vibrations, so if you want it at 201 ms. you're welcome to make your own program and exercise your personal taste.
- This prgram Registers Event Handlers for: "G-Sensor", "Incoming Call", "Phone Call in Progress", "Stylus in/out", and Power Manager events. DO NOT move it to Internal Storage, you have been warned.
Requirements:
.NET 3.5 + HTC device with GSensor & Light Sensor.
Compatibility:
Specifically designed for Diamond & Raphael, but will work fine on HD/Rhodium/Topaz/HD2 etc...
Bugs/Limitations:
Knock yourself out...
Release Notes:
- This is the LAST revision/release/app I make; programming too much work
- Download & Install the CAB
- Run the XSense from your Start Menu\Programs, customize to taste, and enjoy!
Change Log:
- Brand New UI: VERY "finger friendly" this should be especially useful if you have a WVGA Device
i.e. HD/Rhodium/Topaz/HD2 etc...
- Revised entire code for existing & potential bugs, and Performance
tweaked to death.
- Removed various functions (auto speakerphone, car-kit options, etc...). Use "Touch InCall Screen Tweak" for these,
its handles Phone/Speaker brilliantly!
- Shortcut added to Startup for automatic launch after reboot.
- Shortcut with a nice icon added to Start Menu (Credit to VetVito).
- General Tab:
- Navi Button will only light up if the device is in a dark place, i.e. You will
always see where your phone is (before you trash it against the wall).
- Stylus Tab:
- UI elements to select & set sounds for Stylus-in/out events.
Disclaimer:
This program is provided strictly on "as is" basis. It is intended only as a proof-of-concept. Although fully functional, it must NOT be considered for daily use. This software is very likely to compromise the integrity of your data as well as invariabley cause your device to malfunction in any way, shape, or form. Therefore, the developer shall be absolved of all responsibility towards testers and/or their computers & devices. While using this software you agree to be solely liable for all and any damages you do to yourself, your device, or any damn thing you possess and care for!
Download XSense v1.2 - Final
http://forum.xda-developers.com/attachment.php?attachmentid=265847&d=1263112521
Thanx but any screenshots?
N'ash said:
Thanx but any screenshots?
Click to expand...
Click to collapse
of what? my profile switching to silent on face down? The UI is fantastic and finger friendly: big elements, animation, colors, etc... take my word for it...
Doing something wrong?
I tried the program, but the only part working fo me (Topaz WM 6.5 Infido ROM) was stylus in/out, producing the appropriate sound. Everything else was not (shifting profile ans so on...). What I am supposed to do besides going through the settings and load the program (red arrow)?
steami said:
I tried the program, but the only part working fo me (Topaz WM 6.5 Infido ROM) was stylus in/out, producing the appropriate sound. Everything else was not (shifting profile ans so on...). What I am supposed to do besides going through the settings and load the program (red arrow)?
Click to expand...
Click to collapse
Change the polling down, i have set mine to 1500, gives better response time but at the cost of a tiny bit more battery. everything tht should work does work on my topaz..thanks for the app
wez89 said:
Change the polling down, i have set mine to 1500, gives better response time but at the cost of a tiny bit more battery. everything tht should work does work on my topaz..thanks for the app
Click to expand...
Click to collapse
Thank you dear, glad you enjoy it
I like it, thanks. On my TD2 I can still see the tabpage1,tabpage2 on the bottom however (tbh im happy with that, makes the program much faster to set-up) and even though I just installed v1.2 it still says v1.1 in the about page.
i like the program, especially the options like suspending on upside down. I do have the feeling it puts a bigger drain on my battery, but that also might be my 6.5.3 ROM.
I do hope that you keep on updating the application, adding more options and perhaps tweak it a little bit performance and battery wise -- if possible.
For version 1.3, I hope you can add the option to disable the sound when moving the stylus in and out of the phone. And to answer your question; yes I am too lazy to make an empty .WAV file.
Also, do you think that disabling certain options will make an impact on (CPU-)resources the program uses?
Thank you very much for making this app, tbh Im kinda surprised it doesn't get a lot of attention (considering last post is already the 11th of January). I find your app adding features to my TD2 which it should have by default and that I find extremely useful. I hope you keep on expanding options and features to your app, and that your v1.2-'FINAL' version is in fact not the last update of this program
Basically; please keep on developing.
Thanks Great APP
I meant this ScreenShot:
Love it, love it, love it !!!!!!!!

[APP] gMapsSpeed | Speed info and speeding alerts for Google Navigation | Update!

Description
Get speed information and speeding alerts for your Google Navigation!
Trial features:
- Display overlay with speed information on your screen
- Display last two digits of your speed in notification area
- Choose between km/h and mph
- Starts automatically when connected to car dock
Pro features:
- Speeding alerts
- Smart alert volume adjusting to background noise
- Configurable speed overlay behaviour (hide, show only if Navigation is running)
- Trial notice removal
- And you will support independent developer and encourage me to add new awesome features!
This is a beta version supported via xda-developers forums, but e-mail communication is also available, especially for Pro users customer support.
Download
gMapsSpeed (Google Play)
gMapsSpeed Pro (Google Play)
Changelog
Code:
0.5:
- Since new version of Google Maps does not allow me to detect if navigation is running, the feature was replaced with "Only show speed overlay if Maps are running"
0.4:
- Due to new Google Play policies, PayPal payment option had to be removed
- Holo theme implemented
0.3:
- Fixed performance issues
- Option to hide notification icon
0.2:
- Market license support
Johny_G said:
Description
- Speeding alerts
Click to expand...
Click to collapse
What data are those based on? There's no speed data available in Google Maps so you do need some source to determine the allowed speed, what is that source?
Currently, it is the simple user-defined threshold system that is also used by some HUD-style applications, but I'm trying to implement something smarter for later releases .
hm, too bad, makes it pretty much useless
We will see what I'll figure out - having database of speeds is impossible with my budget, but I have some ideas how to make it better. But I personally use the threshold system, and it is actually not bad and it saved me from some unmeant speeding situations. And do not forget, that car's speedometer shows about 5% lower speeds compared to reality, so you know by sound when you reached the actual speed.
where i live there's no general speed limit but limits are different all the time (30,50,60,70,80,90,100,110,120,130) so manual tresholds just won't do it :-(
Oh, I see :-(
Just a small update today. The speed alerts will be improved later.
Changelog
0.2:
- Market license support
Like the app, just what I need. After minor update the app freezes however.
In what situation?
No exception. The first version worked flawlessly. This version gets stuck as soon as you open it.
Is there a way to revert to the first version? That one worked.
HTC Incredible S. Standard OS Android 2.3.5
Oh, I see it. Will resolve it ASAP.
Got a solution! I will implement one little feature and publish the update later today. Thanks for reporting!
Hey OP...
Quick question...I purchased the app in the market and on my phone i opened the beta app and registered it, now my question is why does the app in my app drawer still say beta? Did I not register correctly? Please help
The app is still in beta stage, but your purchase authorized you to use the Pro features. As it makes it to final version, you will get all the new features with no extra charge .
The update is here!
Changelog
0.3:
- Fixed performance issues
- Option to hide notification icon
App works again, performance issue fixed. Thank you for the swift response.
Found this app on the market and I have a question about the pro version. The main feature I like about pro is only showing the overlay when navigation is running. The only major problem is that it keeps the GPS active even if navigation isn't being used.
Are there any future plans for implementing a feature that will auto start this app when the navigation app is opened, along with closing it when navigation ends? This will prevent from having to manually open and close an additional app each time.
Sent from my SPH-D710 using xda premium
This is not easy to handle since Android does not tell you when app has been started. Only way I can think of is some service, but it might cause serious battery drain. But I can turn off the GPS if not visible. It might help.
I'd imagine, if it's possible it would only be for root users. I'm not a dev, just brainstorming really. The overlay looks great and it's 2nd to none right now.
Sent from my E4GT using xda premium

[App][FREE] intelliScreen - The screen timeout all in one App

Hello
we published shortly our new application called "intelliScreen" in the Play-Store.
IntelliScreen is the all in one App handling the screen timeout on your Android device!
Features:
-Set a position in that the screen will always stay on (intelligent mode)
-set an individual global screen timout time (e.g. 42 seconds)
-Individual rules for specific Apps (e.g. screen always on, customized screen timeout, ...)
-Individual settings for keyboard dock and car dock
IntelliScreen is available in the Google Play Store: play.google.com/store/apps/details?id=eu.pyrobytestudio.intelliscreen.full
It works for smartphones and tablets.
This app is pretty new, therefore, we greatly appreciate bug reports, feature requests, suggestions, and questions.
Thank you
Regards
Andreas
Did I hear that name before
Sent from my GT-N7000 using Tapatalk 2
aalupatti said:
Did I hear that name before
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes, ipad in cydia
I want intelliscreenx someone make it happen
Sent from my VS920 4G using xda premium
New version
Hi all,
we published a new version of intelliScreen for Android.
Some of the new features are:
• light sensor: if its dark screen goes out (e.g. if you put your phone into your pocket)
• dock functions: choose if the screen should stay on when you are using a dock (e.g. desk dock)
• display filter: saves battery life for AMOLED displays and great for eBook reading
• info HUD: shows always the state of the accelerometer, CPU, light sensor and active app rules
• no Ads, no Internet permission required!
The app is for free available in the Play Store: play.google.com/store/apps/details?id=eu.pyrobytestudio.intelliscreen.full
We greatly appreciate bug reports, feature requests, suggestions, and questions.
Thank you
Regards
Andreas
New major release
We published a new version of intelliScreen for Android. IntelliScreen is the all in one App handling the screen timeout!
Some of the new features are:
-Wake up device automatically by putting the smartphone out of the pocket
-Optimized method for detecting the active foreground app
-Added integrated help system
-Added option for setting app specific display brightness
The app is for free available in the Play Store: play.google.com/store/apps/details?id=eu.pyrobytestudio.intelliscreen.full
We greatly appreciate bug reports, feature requests, suggestions, and questions.,
Thanks!

[APP][2.2.3+/3.2+/4.0+] Smart Selfie - Facial Recognition Voice Guidance

Smart selfie is a FREE voice-guided photography app that use facial recognition to help you take better selfies with the back camera of your phone by giving voice prompts on how to adjust the phone, such as moving it left, right, away, up, etc so that photo participants are well centered in your photos.
//////////////////////////////////////////////////////////////
Latest Version is now 1.14. Some pretty exciting features added to make the app easier to use.
1.1.4
*Measure beta (Now gives the size of the movement for up, down, left, right.) *Measure beta now supports Eyeliner mode.
*New Camera settings added - Picture Quality and Picture Size.
*Crash fixes and optimization when taking photos.
*Moved to a new UI. Presets, Detection settings and Camera settings have been moved into the Action Bar and appear as icons.
*Minor bug fixes.
*Redid some voice guidance recordings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
///////////////////////////////////
Normally, to use the better quality and higher resolution camera on the back of your phone to take selfies requires a lot guesswork as you cannot see front screen of your camera
You also need to clumsily click the screen to take the actual photo.
Smart selfie can identify one or multiple faces, then direct the user to move the phone position so that is is in the optimal position. It will then automatically take the photo once your camera is in position.
Another great advantage is not all android smart phones have a front camera so this app would be perfect for owners of such phones to take selfies.
Current selfie apps in the android market simply switch to the lower quality front camera as a default or they might have features that will take photos when your whistle or provide voice commands. This is a rather cumbersome way to take selfies. Some may have a library of cool photos filters and effects, but these do not actually assist in taking the actual photos.
At the time of writing ICS (4.0) is required for full functionality. With 4.0 you can automatically take photos and share them online via social networking sites or pass the photo to other apps for further enhancements.
The core functions will run at 3.2 or higher. The app will lack the ability to share photos if your OS is less than 4.0
For those running and OS between 2.2 and 3.1. You will get the full facial detection and voice guidance feature, however the photo must be taken manually once the camera is in position. (This may be changed in the future.)
Limitations of this version:
*5MP max image taken on back Camera (if your phone is capable of higher resolutions photos will be taken at 5MP)
*Detect Up to 4 people.
Requirements
Min Requirements CPU: 800mhz OS: 2.3+
Recommended Requirements CPU:Quad Core 1Ghz+ OS: 4.0+
Other Requirements: You device needs to have a back camera!!!!!!
///////////////////////////////////////////////
That aside at the moment the UI is a train-wreck, the core functionality seems to work well. Feel free to download the app, take a few selfies and provide feedback to see how it works on different devices.
In additional i would like you know how you feel about:
1) The voice guidance quality? This was taken from several recordings done on an android phone in relatively noisy conditions, I had all sort of background noises like light aeroplanes, garbage trucks, bird tweeting, clothes dryer, strong wind, traffic, and some paper rustling.
2) Do you think it app takes too long to take a selfie?
3) The limitations are they ok? This app allows better quality selfies even on new devices like Samsung galaxy 5, which sports a 2MP front camera.
4) Any other feedback/comments/tips?
Smart selfie Free is available on the google play store the package is
https://play.google.com/store/apps/details?id=com.aidedesk.smartselfie
Happy Snapping !!!!
@hotspot_volcano link?
Sent from Galaxy Note 3 SM-N9005 Stock: 4.4.2 Rooted
the settings should stay between taking multiple pictures & there should be some notification once the picture got taken/
Wait a min
Do you mean a front camera or what? (actually a back camera?)
Sorry but i didnt get the concept...
starcallr said:
the settings should stay between taking multiple pictures & there should be some notification once the picture got taken/
Click to expand...
Click to collapse
+1
It did say "say cheese" and I got a picture, but no click, no "how lovely!" or other indication.
This thing is really ingenious, quite nifty, and did work even on my 600mhz single-core-clunker. Voice instructions were on the quiet side (could explain why some users missed them).
The UI could be more modern, but so simple and adequate as-is. But do make it persistent. And the option, at least, to automatically find the up-to four faces without need to ask, might be nice as well.
Selfies with only a rear camera? Got it :good:
You got a very interesting app. But it needs some pruning though. Can you put it in video mode, and user just angles the phone for a selfie, and your app takes a snap automatically when the faces are focussed. Since its a selfie, you know that the face has to be like 30% to 70% of screen area. User opens app, points the back camera at themselves, and tilts the phone in a few angles. You select the best shot automatically. Its just an idea. You would know better
additional suggestions,
apart from wat these people are saying as a suggestions, i have some of my own. but i tried this app and i find this great..only 2 aditional things:
voice guidance should be louder..and (if possible), have proper diction. i have trouble recognizing the voice guide on my phone because volume is a bit low. i tried to use an earphone while testing to take a selfie..and i had trouble when the command says "left" because the female voice's diction sounds like "lift". atleast put an option to adjust voice guide volume..or let it be controllable with volume buttons (you know which of the 2 is the best).
This app does ake decent shots after guiding you. But, please add adequate lighting sensor, or at least the ability for the voice guide to tell you to turn on flash if the lighting condition is low..something like that. i hope you get the idea.
that's all..this is an innovtive app..but as always, there's always room for improvement.
Awesome App
This app is awesome. It even works on 600 MHz phone. And selfies are great. But there should be a click sound to notify user that the picture has been taken. and moreover there should be option to delete the pic directly. Good job @hotspot_volcano :good:
Hope to see changes in next version.
Kill it! Kill it with fire!
Thanks for the feedback from starcallr and Dovidhalevi. I've implemented some of them.
Just released v1.08 after having a lot of fun getting Android v23 installed, took several hours installing and uninstalling after that to get things to compile once i figured out the missing files.
Anyway from the feedback I've made some changes.
*New detection feature: Added Face Zoom (Allows close-up, or further-away selfies.)
*Ability to change volume more easily.
*All settings remembered from previous session.
*Popup reminder showing settings shown at the start of each photo session.
*More audible photo capture sound. (The click is 10X louder now.) But I might replace the audio click with some voice prompt so it would be 3X louder still without sounding out-of place.
#to do list (over the next week)
*Unified settings. All settings appear together in one Alert Dialog. (15% done) Attached a quick layout.. tell me what you think.
*Flash available for low lighting (as for detection it may need a low light facial detection feature which may i may only put in the paid version)
*A delete feature to delete the just taken photo.
*Auto-detect orientation (25% done)
*Fix up app crash after you have successfully taken a photo on your default camera app when you try and return to Smart Selfie on Android OS 2.2 - 3.1
#planned tidbits (over then next year)
*5 or so detection features(paid version probably), most of these will need OpenCV. (The very first version of this app was in OpenCV + NDK)
*Augment Reality features, maybe hats, sunglasses, hair and stuff that would be visible on the screen and automatically placed on detected faces, and would appear in the final photo when taken
=============================
I have tested earlier versions in public places it and the audio is already boosted up ~15db on average. I did have a silly idea of a vibrate morse code which could be used in extremely noisy places. Something like a short + short vibrate for left, short + long vibrate for right. The vibrate wont affect detection as won't be detecting when the vibrations are occurring. But not going to give it a go for now. Flashlight style Flash to give directions might also work, if it doesn't give people epilepsy.
Use of a Bluetooth headset might also be possible for very noisy places.
The UI is old fashion, i've been away from Android a while so Holo Light is giving me serious grief. Thinking about using Action Bar to replace the missing menu and avoid the LGPLv3 HoloEverywhere library. When i do set minimum APK.. the layouts go half sized. Anyway I'd like to concentrate on features at this stage.
There are apps like mine on Windows phone and IOS and I'd like to be the most comprehensive selfie app out there.
As for not requiring to input the right amount of people at the start. The app at the moment will center the detected faces the ask the user to move the camera away to a certain point in hope that the missing people will appear in the screen eventually? If they don't then you get stuck in a loop. But i will consider an auto (at your own risk setting)
WAY better than the previous version/
Amazing App!!
Amazing app!! Lovin it so much!! but ui need to be updated.. Other than that it's a great app for selfie!!!! Really a great job!! @hotspot_volcano
chitrank said:
Amazing app!! Lovin it so much!! but ui need to be updated.. Other than that it's a great app for selfie!!!! Really a great job!! @hotspot_volcano
Click to expand...
Click to collapse
Thanks guys the next version is going to be much better. I'm actually quite excited about the next version.
Having spent more time thinking about what to put in the next version, it will have:
*Beginners/Casual Mode (Balance Sensitivity). If you don't mind your face not being perfectly centered in the photo.You can take photos quickly with little hassle. Detected faces will always appear within the photo with no parts cropped off at the side or top of the photo no matter what setting sensitivity is selected.
You can crank it up or down depending on your selfie taking skills and you/your groups patience in taking the perfect selfie.
*A slight change to the voice guidance algorithm. Hopefully this will stop the left right loop if you start with the phone too close to your face. For best results at the moment always start with the phone about 1/2 meter from your face.
*Fix any settings that don't appear to be saved properly. (I'm getting some issues with Preview Size changes sometimes not saving as expected?)
*Delete photo feature option. (Complete, but just don't ask when Windows 7 RTPing you see the deleted ghost files on 4.4 builds?)
*Unified settings. (getting there)
*Increased volume? Most recordings was set to 90% loudness. I'll experimental with increasing them to 100%. Anyway for noisy places I highly recommended using a portable Bluetooth speaker ones that are small enough to be slipped into your pocket.
My flagship test device is the Moto G which is one of the loudest android phones in the market. With speakers pumping out ~87 dB. Most of the commands was fairly audible even in packed and noisy food-court using the default speakers found on back of the phone.
Thanks for the great feedback guys.. Made a few changes in the most recent update. Plus a few more sites decided to showcase my app taking my app over 1000 downloads, and getting myself a small amount of people to test my app to make sure it works and all.
I'm planning a media launch soon as the app is nearly getting there. Have to rewrite my promotional material which was based on the very first version.
The paid version is no where is sight. The free version features that need to be sorted and taking up a lot of time.
The next update is going to be fairly exciting. These are the planned changes.
*An amazing useability feature that makes taking selfies even easier. It will be available on the free version because it would be probably make the free version cripple-wear if i just added it to the paid version. :angel:
*Auto-detect orientation (Yes this got pushed back.. working on it)
*Flash available for low lighting (Yes this got pushed back.. working on it)
*Attempt to fix submitted bug reports.
*UI (Holo light UI - no guarantees which means probably not :silly
*Continue to update the website so people can just use google translate to read the HELP and TUTORIAL notes in their preferred language.
/////////////////////////////////////////////////////
binu.udaya;54334510. Can you put it in video mode said:
I'm not too familiar with the hardware side of android as far as video mode is concerned, but i was always under the impression you would get lower resolutions under video mode. Moving the camera while taking a photo will cause motion blur.
Well there are already apps out there that do this.I though they just took 3 shots in quick succession. I could probably add such a feature, but i think the photo is pretty accurate. Especially on the higher settings of Face Balance.
Just to give you idea how accurate the balance is. Just say are taking a portrait photo. Your 4.5" screen displays has a preview image that is 5cm across on the screen. If the gap between the face and the left-side of the picture is 1.5cm then the right-hand side gap between the face and the right-side of the picture can not have a difference more than 0.225cm.
I don't know how many people can get a selfie balanced to 1/4 of a cm by looking at their screen. I'm more surprised if they can get that accuracy without looking it and not get any voice guidance.
FYI the v1.08 fixed settings would have required a difference less than 0.3cm based on the above criteria. So if you managed to get a few snaps off at on the v1.08 thats how well balanced your photos are.
That is why i added the Balance sensitivity, the crazy accuracy is not required in all situations. Takes a few dozen shots before you built up the experience to take photos at that level.
Click to expand...
Click to collapse
1.1.3 is an amazing new update!!!!!! Manage to squeeze in a bunch of features.
Finally manage to roll out the amazing useability feature Measure. Which provides a size of the movement in addition to the direction. Unfortunately i didn't really have to the time to extend the feature to up and down.
*Presets now available. Pick and choose different presets such as using a selfie stick; propping your camera against say a book then you walk away, photos are taken automatically when your in position; taking photos from different angles such as the Baby face selfie where the camera angle gives the illusion of bigger eyes.
*Eyeliner. Allows the vertical alignment of eyes in your photo. Gives a much larger variety of selfies you can take now.
*Voice Guidance speed is now adjustable. Set it faster if your more experience in using the app or lower if your new or English is not your first language.
*Website updated. All help information is available online and translatable into your preferred language. Link added to Playstore and accessible in app.
Whats in the next version?
*Crash bug fixed hopefully. Be focusing on why there are crashes when photos are taken. Made several changes already.
*Continue to work on Measure (UP,DOWN).. will also look at Measure( closer and away)
*Pickable Photo capture resolution.
*Pickable white Balance Mode (Maybe)
*Holo Light GUI (I'll take a look.. lol)
If you haven't already please try out Smart Selfie v1.1.3 and tell me what you think now?
v 1.14 took a bit longer than my general 7 day for an update but its finally here. Holo-Layout. Some people have been asking for it since v1.03
Forcing low resolution setting on high resolution devices was a MAJOR HEADACHE. Its still has a minor bug with half-sized screen randomly appearing but that's been around since v1.03. While i just moved to Holo layout, I don't want to know anything about Android L.
Lets take a look at our planned updates for v1.1.4 and what was done.
*Continue to work on Measure (UP,DOWN).. Measure Closer and Away (No plans for now)
*Pickable Photo capture resolution.
*Holo Light GUI (I'll take a look.. lol) - Seems Action tool bar works well for all versions of supported android.
*Crash bug fixed hopefully. Be focusing on why there are crashes when photos are taken. Made several changes already. Unfortunately once i started the UI I stopped working on crash fixes so more to come.
v 1.1.5 planned features
*Pickable white Balance Mode (soon i hope)
*A Custom Share Intent. Will be better than the stock one which may have problems with setting a default ShareIntent.
*Revisit and review code that may cause crashing when taking photos.
*In-app volume that does not change your current volume setting (ie not get blasted by the noise from other apps you run after smart selfie)
*General house-tidying of text strings in the app. One step towards the NOT planned in-app multi-language support.
*Creation of shared libraries. So that the paid version can re-branched.
*Small fixes to the UI where deemed necessary.
*Some sort of auto-orientation feature.
EDIT: Managed to get my hands on a LG P500 512 MB RAM, 3.2MP, 600mhz. Updated the rom to 4.04 onto it. Manage to take a photo without crashing though it took a while to show the photo.
The background wallpaper kind of leaks through into the app but i think its just the Rom.
If anyone have a device with 256mb ram try testing it and see if it causes any crashing (due to the lack of memory)

Smart Light -One of the best and safest flashlight apps world!

Hello Hi, my first published in Google Play, Please buy it and enjoy it
One of the best and safest flashlight apps world!
This is smart light
A program that now we introduce you to one of the best programs in the field of light and flashlight.
This program is something that it is distinct from other program with a flashlight:
Smart turn off led Flash
The ability to turn off a few seconds Flash smart smart phone you after a while use your android device which makes it 99% of the dangers of too much heat is safe to Flash you comfort for a long time this smart app will eventually have to use
In addition, if your device does not have a Flash again, no problem, you can use the capabilities of the display device to use.
This feature is that the display device with android you have the highest light mode puts your white background and gets whatever device you have a larger screen with higher brightness this feature will be more useful for this feature on the Smartphone with the screen is larger than 4 inches works great even we have it on the screen, we also test and 3.7-inch was a very satisfied
We think this program is excellent value with the features they have that amount to a negligible cost this amount against the others we build it is really no
I hope to eventually have it's fun when you use
link in google play :
Mod Edit: Links removed.
Please do not copy
thank you​
Please comment about the app
Added screen shot

Categories

Resources